m17-m19

Fundamental Principles of Energy and Work

  • Principle of Conservation of Energy: Energy cannot be created or destroyed, only transferred from one form to another.

  • Work Done (WW): Defined as product of force (FF) and displacement (ss) in the direction of the force.

    • Formula: W=Fscos⁡(θ)W = Fs \cos(\theta), where θ\theta is the angle between force and the direction of motion.

    • Area under a force-displacement graph represents the total work done, applicable to both constant and variable forces.

Potential and Kinetic Energy

  • Gravitational Potential Energy (GPEGPE): The work done to raise an object through a height Δh\Delta h.

    • Formula: ΔGPE=mgΔh\Delta GPE = mg\Delta h.

  • Kinetic Energy (EKE_K): The energy of an object due to its motion.

    • Formula: EK=12mv2E_K = \frac{1}{2} mv^2.

  • Freefall Dynamics: In the absence of resistive forces, loss of GPE equals gain in KE: Δ(12mv2)=mgΔh\Delta (\frac{1}{2} mv^2) = mg\Delta h.

  • Elastic Potential Energy (EPEEPE): Energy stored in materials like springs or bungee cords. If it obeys Hooke’s Law, the stiffness constant (kk) is used to determine stored energy.

Power and Efficiency

  • Power (PP): The rate of doing work or transferring energy.

    • Formula: P=WΔtP = \frac{W}{\Delta t}.

    • Mechanical Power: P=FvP = Fv, where FF is force and vv is velocity.

  • Efficiency: The ratio of useful energy output to total energy input.

    • Formula: Efficiency=useful energy outputtotal energy input=useful power outputtotal power input\text{Efficiency} = \frac{\text{useful energy output}}{\text{total energy input}} = \frac{\text{useful power output}}{\text{total power input}}.

Applications and Resistive Forces

  • Resistive Forces: Air resistance and friction perform work against motion, often converting mechanical energy into heat.

    • Work done against air resistance = Loss in GPE−Gain in KE\text{Loss in GPE} - \text{Gain in KE}.

  • Vehicle Safety:

    • Stopping Distance: Sum of thinking distance (constant speed) and braking distance (constant deceleration).

    • Safety features are designed to increase contact time during a collision to decrease acceleration for a fixed change in velocity.

  • Renewable Energy: Wind turbines convert the kinetic energy of air into electrical power.

    • Mass of air passing through blades per second = ρAv\rho A v, where ρ\rho is density (1.2 kg m−31.2\,kg\,m^{-3}).

Quantitative Data and Specific Scenarios

  • Bungee Jumping Example: A 60 kg60\,kg jumper on a 200 m200\,m bridge; cord length is 100 m100\,m unstretched. Analysis requires calculating KE, GPE (relative to water), and EPE at various heights.

  • Slide Example: A child of mass 41 kg41\,kg climbing a 3.0 m3.0\,m vertical height slide; calculation of GPE gain and subsequent speed at the bottom assuming zero friction.

  • Electric Motor Practice: Efficiency tested by lifting a mass through a height Δh\Delta h and comparing electrical energy supplied to useful work done (mgΔhmg\Delta h).

  • Project Specifics: Equipment like the Easysense light gate, Duncan textbooks, and an air track glider are utilized to measure velocity and confirm energy conservation theories.