radiative heat transfer
So today, we will look at a very important concept in radiative heat transfer namely
0:16
blackbody. The definition of blackbody, its properties right and then this is central
0:23
to the study of heat transfer; it is like the definition
0:28
of God and looking at the properties of God, because it is essential to understanding spirituality.
0:34
So, like that a blackbody is the benchmark; there is no perfect blackbody in
0:39
the world. Do not extend the argument I am saying. So, we we define the properties of
0:49
real surfaces based on some benchmark. That benchmark is the highest always getting CGP
0:56
of ten and all this and this . So, something like that is a blackbody.
1:01
So, we have to formulate, define the blackbody and look at some concepts underlying these
1:08
definition and also some of the properties, and then we look at solid geometry and once we have definition of blackbody and then this
1:14
solid geometry, then we will go on to the radiation laws namely Planks distribution before that the Rayleigh Jeans distribution which means
1:24
displacement law The Stefan-Boltzmann’s law and. So, on then it will be followed by properties and. so, on. Now, blackbody. What do you think a blackbody
1:31
is? Absorbs radiation at all ways.
1:42
Does other bodies also absorbs radiation at all? Does not it also allow you to go through?
1:54
Therefore, your definition is partially correct, but it is not fully correct.
2:03
Absorb and emit is a different story. Do not do not talk about emission already .
2:08
Absorbs hundred percent of all radiation.
2:15
Absorbs hundred percent of all radiations incident on it and allows hundred percent
2:20
of radiation incident on it onto itself and internally absorbs all of it. So there are two part of the
2:26
definition. It allows all the radiation to enter it and it internally absorbs, but not
2:31
even percent goes out. So, what does it imply technically? Reflection equal to? Zero transmittance equal to?
2:41
So, blackbody is one.. So, blackbody is one that allows all incident radiation internally
3:18
and absorbs all of it. We will use some color.
3:31
If it is too bad you tell me.
3:57
So, this definition requires further qualification because it allows all incident radiation
4:09
internally absorbs all of it is true for all wavelengths and all incident direction. So,
4:40
this is valid for all wavelengths and it valid for all incident directions. So, therefore for a given wavelength and in
4:53
a given incident direction there cannot be any body which absorbs more radiation than a blackbody. Any real body has to absorb a radiation which
5:07
is lower than that of the blackbody. Now, if I ask a question how do I know what is the maximum absorbed that can be absorbed that comes from theory and is verified by
5:15
experiment and all that. Now it is basically conceptual definition. We introduced something called a benchmark. So, this concept of maximum absorption regardless of the incident
5:26
direction and regardless of the wavelength is central to the understanding of radiative heat transfer. So, the blackbody serves as
5:34
a benchmark with which all the other real surfaces can be compared. Now incidentally the blackbody also emits the maximum radiation for a given temperature.
5:46
This is a consequence of this that can be proved. So, some people as Pradeep Kamath
6:24
defined he said blackbody is one which emits a maximum amount of radiation. That is true, but that cannot be used for defining the blackbody.
6:32
A blackbody is fundamentally defined on the basis of its ability to absorb fully that it is emitting maximum is a consequence of the first.
6:41
It is a corollary. First law of thermodynamics q minus w is equal to delta E. For a cyclic process q is equal
6:50
to w. that that it is only a subset of the general
6:56
law of q minus w is equal to delta E because, you do not know what happens when q is not equal to w. When q is not equal to w what is the
7:06
story? It is equal to the change in energy of the. So, that is more general.
7:13
Therefore that the blackbody is capable of absorbing completely is the fundamental basis
7:19
is the fundamental premise on which the concept of blackbody is has been proposed. right. Now, example
7:35
Ice is 0.98. Emissivity is ice. So we will list ice later.
7:42
Something called a platinum black lamp black lamp black
7:52
Platinum black, some special paints which come very close to that.
8:15
So, suppose you want to do experiments in heat transfer lab not necessarily IIT Madras
8:25
somewhere you are going to do experiment. You want to realize it is a blackbody; what you can do probably you take some aluminum plate
8:31
or something you will coat Asian paints and wipe on and take a brush and coat it and let it dry or if you are rich enough you can
8:40
do the spray painting. Now, you measure the emission it will give 0.8, 0.88, 0.99 all that, because there will
8:46
be some places where you have not fully coated. After it dries second coat maybe it go to 0.92. After
8:54
that it will asymptotically saturate. You cannot get that 1.00, but you will get something like 0.9495 for all practical purposes it is a
9:01
blackbody, if you want to do experiments you can say high emissivity body.
9:07
Now, why this name? Why cannot we call it white body? Black is after all a black color;
9:54
generally a very poor reflector. Right? Hence, they appear to be black. Appear to be black
10:14
from what point of view? They appear to be visually black. But the eye the eye is a very
10:36
poor instrument to detect radiation because you can detect only a very narrow range of 0.4 to 0.7
10:42
micrometer. It takes maybe very black between 0.4 to 0.7 micrometer. But other parts of the spectrum what is the story? You are not in
10:49
a position to you need sophisticated, an you need a spectrometer and this thing and to find out its behavior.
10:56
But, since the visible part of the spectrum is genuinely a part of the electromagnetic
11:03
spectrum if, something is truly radioactively black between 0.4 to 0.7 also it will be black therefore, all
11:12
radioactively blackbodies have to be visually black. However, all visually blackbodies need
11:17
not to be radioactively black because we do not know. Did I confuse or did I clarify? If it appears black it is black in 0.4 to
11:28
0.7 micrometer portion of the spectrum. It may like, it may have a good emissivity, but I cannot say it perfect blackbody because the eye is a
11:35
poor eye is a poor instrument to detect whether to find out whether something is blackbody or not
11:43
beyond that 0.4 to 0.7. Aare you getting the point.? But the radioactively black a radioactively blackbody has to be visually black, but a
11:53
visually blackbody need not be radioactively black. In fact, a radioactively blackbody like ice is actually white in color, because unfortunately
12:03
for the certain portion of the spectrum alone it is doing some reflection. The other portion of the spectrum it just absorbs everything that is why people are trying this climate change
12:13
and all that. Is ice melts? Because there is a difference in the reflectivity between the ice and the
12:21
water if there is a change if more melting takes place then it leads to what is called a runaway effect.
12:26
Let us not get into climate science now I some of you have taken my atmospheric science course. So, you know this. So, therefore, is people there is a big deal about the
12:36
reflectance of ice and water and all that what happens when melting takes place. So let’s conclude by saying this discussion by saying that, now one it not is true may
13:16
or may not be. What are the properties? there other?
13:34
How do you know there is there is something
13:39
ideal concept called blackbody? Why it is necessary to figure out this concept? Why
13:45
bringing the concept of blackbody at all for comparison
13:52
purpose and also to describe radiative properties of various substances.
13:57
Therefore, the theory of blackbody and the properties are proposed by theory.
14:15
What is that theory? What theory is
14:34
it in physics? Quantum mechanics. k? It is proposed by
14:39
quantum mechanics and it has been verified by experiments done by. so, many physicists. right. What is the basic key? The key attributes of a blackbody, a perfect emitter perfect
15:20
absorber is already there in the definition?
15:26
Sir the blackbody is if you have the length... No.
15:43
Now emission is if I looking at the reflection point; that definition of blackbodies from
15:48
a emission anybody will continue emit radiation; so long as it at the temperature above 0 t. So,
15:54
if you are looking at emission color what you are saying is correct. If you are looking
15:59
at the reflection color my shirt is red in color not if it is emitting red I will die man. What is the temperature means? Displacement law I will tell you, I cannot survive. So, it is basically
16:09
because this stupid shirt whatever if it takes it absorbs the entire color except this red
16:15
yeah. So, that is that emission color the color based on emission. We use it in parametric.
16:22
I will teach you little later. Any other question? So, it is quite tricky discussion of blackbody and all that is quite philosophical, after
16:37
that it will get numerical. Of course, then we will keep on solving equations and all that, but first part I will leave like that. So, let us consider now you have to do some
16:46
thought experiment let us consider an evacuated enclosure. Evacuated enclosure is at the temperature
16:53
of T infinity. So, there is vacuum inside. Now I put a blackbody small blackbody
17:20
blackbody initially at T w. So, I am saying that T w
17:25
is greater than T infinity and the blackbody is not touching the walls of the enclosure;
17:39
so which mode of heat transfer is prevented, no conduction. So, it is evacuated. So, there is a
17:51
vacuum there is no medium. So, which other mode of heat transfer is prevented? Convection.
18:00
But T w let us say T infinity is thirty degrees centigrade and T w is 200 degrees centigrade. This is a small body in a large enclosure. After sufficient time has elapsed, what will
18:12
happen? What temperature? I am saying that the enclosure
18:17
is an infinite heat sink. For example, suppose I put for the argument that the heat received from this small body will not affect this
18:25
enclosure, then eventually, equilibration will take place. The blackbody will achieve
18:31
equilibrium with the surrounding eventually. So, you have something like this. So, it reaches T infinity after sufficient length of time
18:58
has elapsed.
19:05
Now, thermal thermal equilibrium is established in the enclosure in which an evacuator is
19:17
enclosure in which a blackbody is present. But the small object is a blackbody. So, what
19:24
is the story there? It is absorbing exactly the same
19:31
amount as it is emitting, because if the emission is not equal to if the emission is not equal
19:37
to the absorption then, there is a net rate of change of enthalpy, which has to take place inside the blackbody, as a consequence of which,
19:46
its temperature has to go down or go up which is again forbidden because already equilibrium has been already established.
19:55
Therefore, therefore the amount of radiation which is emitted by the blackbody is exactly
20:03
equal to the amount of radiation which is absorbed by the blackbody. Since, it is a
20:10
blackbody it is absorbing the maximum amount of radiation. Therefore, it is also emitting the maximum amount of radiation.
20:21
How do you like it? A shady proof, but do not ask me sir what happens if we do not have
20:28
the enclosure and all that. I know to prove it only with enclosure, but it is good enough. Do not
20:34
ask me to repeat. I will I will distort it. So, to cut a long story short, it has achieved
20:44
equilibrium with its surroundings. Now, there is no convection no conduction. So, the amount of radiation falling on the
20:52
body is equal to the amount of radiation which is going out in terms of emission. Emission is equal to absorption, since the absorption is maximum not because it is experimentally verified
21:01
or whatever because, I have already declared it is a blackbody. So, since the absorption is a maximum emission is a maximum. So, it if it is a perfect absorber it goes without saying
21:11
that it is a perfect emitter. So, all those stories you can write. Now, we go to the next one.
21:18
Perfect emitter. So, I will write emission. Absorption is max therefore, emission is hushed
21:48
here. It can be proved it can be proved for a non blackbody also, that is in the enclosure
21:55
if it is only in enclosure. So, if it if it is not blackbody. No, even if it is not for a non blackbody
22:05
also it is true. It does not automatically mean for a blackbody. It is not true. I am not saying it is true only for a blackbody. It is true
22:11
for the blackbody. What do you say? The strategy now is before you will think
22:17
about it I will go to the next one, but it is I will clarify what is your problem? It is true for any bodies...
22:25
at steady state all the when both are in 10 10 . It would not be absorbing the maximum it will equal that is all, but I cannot I cannot put
22:37
for the argument of maximum. The equilibrium anyway absorption is equal to emission there’s no doubt about it. But the non blackbody is
22:44
not absorbing the maximum that it holds good for a non blackbody. It does not prevent us from saying that it holds good for the blackbody.
22:52
What is the problem? Already it’s I mean let it do whatever it
23:01
wants, but what happens to that equilibrium? Let it do whatever it, we give it freedom. You can take study whatever hum you once again
23:12
want to get 165 . We are already considered that the equilibrium .
23:19
We have considered with the equilibrium because, I may be interested in the non equilibrium
23:26
also, anyway you are doing an assignment right that is about non equilibrium, but here I want to prove something. We dint do the experiments
23:35
only thought experiments. We do not have to spend. So, much time on this fine. Yeah, I did not tell you because, I know that it is valid even for a non blackbody, but
23:54
that is.
24:05
Radiation isotropy; if suppose the story is like this this T infinity T w or T equal to
24:17
0 right. I have one more case, where it is the same
24:22
enclosure in the same blackbody, but I am keeping the blackbody here. It is same T w or T equal to zero. Is there any change?
24:33
So, long as the enclosure temperature is at T infinity as it is a small body placed in
24:41
large surroundings where the large surroundings have infinite capacity to take on the heat. Regardless of the position of the blackbody
24:48
it will reach the same equilibrium temperature upon reaching equilibrium the emission will
24:54
be equal to the absorption and that will be maximum corresponding to the temperature T infinity. Since, it is independent of position therefore, you can rotate you can keep it
25:03
wherever you want it is independent of the position or the orientation of the body. Therefore, we say that there there is radiation isotropy
25:11
within the enclosure; within the enclosure, a uniform radiation field has been established.
25:17
So, the radiation isotropy means the radiation field. This blackbody this blackbody is
25:55
inconsequential. This blackbody is only a tool. Its only a prop for me to prove this.
26:00
Even without a blackbody, I can have a cavity like this which is at T w which will be generating radiation. Because it is a greater than 0
26:10
kelvin consequent of the law it will continue to emit radiation. So, if I have a cavity like this, I close I close the cavity on all sides, but only
26:18
have a small hole and if I heat it. So, I evacuated cavity which is heated and which is maintained at vacuum it is a small hole, the radiation field
26:27
emerge from emerging from mid could be isotropic; that means, it will not have a direction dependence. When the radiation is coming
26:34
out, it will have a uniform intensity in all the directions. That is a radiation isotropy. So, this radiation isotropy is related to what is the called the Hohlraum. Hohlraum
26:50
means empty room in. That is German. Hohlraum concept
26:59
can be used to emit or simulate a blackbody under laboratory condition.
27:10
If you want to if you want to simulate a blackbody, instead of doing four or five coats of
27:15
paint, you can build a cavity and close it on all side and have a small hole. Evacuate
27:22
the cavity and heat it with a microbe wire or all that all over the place and then the pencil of rays
27:28
which is coming out from the top hole or wherever it is, that is basically an isotropic
27:33
radiation. It is equivalent to radiation from a blackbody corresponding with the temperature
27:39
of the enclosure.
27:44
Perfect emitter in every direction; how do you prove this within the enclosure business?
28:11
Suppose I ask T infinity. Now I have only one small area d A, which is active on the
28:27
walls of the enclosure. The all the other areas are not radiating the radioactively active. Even then
28:34
after sufficient time has elapsed equilibrium will be established and the body will also cool down to temperature equal to T infinity.
28:42
Now, the body will continue to absorb radiation and this radiation will be maximum because
28:47
it is a blackbody, but all the radiation is coming in a particular direction because only
28:53
one portion of the enclosure wall is active and it has to and it has to radiate back the same radiation because if it is not so, then equilibrium
29:03
will not be established; therefore since it is absorbing the maximum in that particular direction by consequent upon v urging the
29:12
blackbody by making. So, many portions of the enclosure wall invalid, It has to radiate
29:20
the maximum in the same direction. Therefore in a particular direction also it will be the maximum emitter.
29:28
So, it is anyway is the same in all the direction it is maximum and equal in all the directions.
29:38
These are not required for solving the problems and all that, but this is the conceptual clarity
29:48
is very difficult. No, I will not ask any question in the exam from this, but it is it is central to your understanding.
29:55
Well you can solve problems without understanding. I am putting forth one argument. I mean
30:02
it can it can get radiation, you can design an experiment where you can receive radiation only in a particular direction it gets heated,
30:08
but eventually it has to get cooled because that is, I mean from the second law of thermodynamic, but when it is radiating back the enclosure
30:16
will not accept radiation from any other direction. So, it has to radiate in that direction. In that direction emission must be equal to the absorption. Since, it is absorbing maximum consequent
30:24
upon it being a blackbody, it is also emitting the maximum in that direction,. But as a consequence of radiation isotropy in the enclosure, it
30:31
is not only maximum it is also the same in all the directions right. Before you get further doubt we will move
30:44
on to. Perfect emitter in every wavelength
30:50
Now, I can design this, I do the same thought experiment, but now the walls of the enclosure
31:14
are. so, designed that it will emit radiation or it will absorb radiation only in a very small wavelength interval of d lambda about lambda.
31:23
When it is doing that this poor blackbody will also absorb radiation only in a small wavelength interval d lambda about lambda; while it can
31:33
continue to emit radiation in any other direction in any other wavelength, but the walls of the enclosure are in a position to absorb radiation
31:40
only in the same wavelength interval d lambda about lambda. Therefore, whatever is absorbed
31:47
must be equal to whatever is emitted otherwise equilibration will not be established. And this d lambda about lambda is purely under my control. I can change this d lambda about
31:57
d lambda about the lambda at my will. This lambda can be in infrared ultraviolet whatever.
32:03
Therefore it should be valid for any d lambda about lambda therefore, at every wavelength it will be the perfect emitter.
32:11
Now, E you can fill up. Suppose you have an enclosure like this T infinity and you have
32:53
a blackbody T w. You start the experiment. Same
33:03
thing vacuum no no no conduction no convection. What will be the eventual equilibrium
33:09
temperature is here? T infinity. Here? T infinity. So the characteristics of the shape
33:16
of the enclosure do not affect the eventual equilibrium temperature. Therefore the radiation
33:21
field inside the blackbody does not care a damn about what is what is its shape size and all that. What all that has been evacuated and
33:28
fully closed, it will continue to emit isotropic radiation corresponding to its temperature
33:38
only. Therefore, blackbody radiation whatever you want intensity whatever that we can see later. Blackbody radiation strength is a function
33:49
of T only. So, we have covered lot of grounds, right? At least 5 attributes, right?
34:05
So, one more question you have to answer before we move on to solid geometry? Where m is
34:35
greater than 1one for example, m is not negative. Whether the radiation strength increases
34:41
with temperature or decreases with temperature? The answer is. so obvious, it increases it
34:49
increases with temperature. This is what happens when you keep on arguing, so much about something. How do you prove it? How do you know that it is a monotonically increasing
34:59
function of temperature the radiation strength? That is if there is a blackbody at 300 kelvin it is emitting some blackbody radiation. If there
35:06
is some other blackbody at 500 kelvin it is emitting some other radiation strength intensity or flux whatever. How do you know that for 500 kelvin it will be more than 300 kelvin.
35:16
No something tells no sir. It is 3 to the power of 4 whatever, but right now we assume that we do not know that it is proportional to the
35:23
T to the power of 4. Now, we can again do a thought experiment. So, we can consider two plates which are at
35:31
temperatures T 1 and T 2 and the radiation strengths are E 1 and E 2. I will assume that
35:41
T one is greater than T 2, but for a change I will
35:46
assume that E 1 is less than assume if I divide by
35:55
that no convection no conduction, only radiation is taking place evacuated. Now if E is less than E 2, then what is the direction of flow of energy.? So, Q equal
36:10
to E 2 minus E 1. So, it will flow from this. So,
36:16
you have a positive transfer of energy from a body at a low temperature to a body at high temperature which is forbidden by the second law of
36:22
thermodynamics unless you are able to transfer some work. Therefore, nothing in this argument is wrong except our original assumption that E is proportional to 1 by T. Therefore,
36:34
the original assumption should to be wrong. Therefore, E has to be a monotonically increasing function of temperature. So, such ways of proving something by proving
36:43
the false to be observed it is called reductive ad absurdum. You have heard about it? Reducing
36:54
the absurdity. I talk about it. How do you prove that that root root two is irrational?
37:08
Assume that root two is rational and keep on getting something finally, you come to some conclusions and that conclusions are
37:14
unsustainable. Then you go back and say that all the steps are correct except my original assumptions that root two is rational. Therefore, root two like many of us . So, now, let us
37:27
these are the attributes of a blackbody. Now, what is the story what is this E? We
37:36
we do not know. How does it say? Is it T to the power of 1234 whatever? We do not know so, many minds. The best of brains hundred
37:47
years back have been working on this problem. Right. In order to derive this blackbody characteristics that is the quantitative aspects of the
37:56
blackbody behavior, it is imperative that is study little bit of solid geometry. The
38:42
solid geometry required to study blackbody characteristics. First, we will introduce solid angle d omega; so
39:09
the plain angle that is d l right and the radius
39:22
r; so d alpha equal to d l by r plain angle unit radiance one its plain angle;
39:54
so two solid angle.
40:00
This is the area d A n that is area normal. This is the radius r. This is a small elemental
40:18
solid angle subtended by the elemental area d a
40:24
n at a point of this. So, d omega omega is a n the n
40:37
subscript denotes normal area. What is the unit for this? Steroidal.
40:50
Don’t put capital s r. Capital s small r is congium. The periodic table; what is
41:12
the atomic number? Congium is congium 90. Congium 90
41:20
is used in cancer therapy radioactive. Do not put do not make it radioactive. Already there is a radiation so, lot of people use the capital
41:35
k for thermal conductivity that is not correct capital k is reserved for Kelvin. Small k is thermal conductivity this solid angle.
41:41
So, the first is solid angle. Next is we have to introduce a spherical coordinate system.
41:55
So, what is a spherical coordinate system? So,
42:08
let us consider, there is an elemental area d a one it
42:24
is emitting radiation. It is going in all the directions. There is another elemental
42:30
area d a n which is intercepting intercepting this radiation.
42:37
So, this is the. Now, you can you can have you can chain a
42:46
torch light on this, then its shadow will fall on the x y plane, then this angle is called the pi and this is your n you need better when
43:04
it is vertical and this d a is like this. So, this
43:11
included angle this angle is called theta. So, theta is
43:16
called the zenith angle and pi you call the Azimuthal angle.
43:28
Is there a stick here there used to be one stick it is there.
43:40
Let us start from this. This the x equal to 0 y equal to 0 z equal to 0 this point, but
43:50
it is not clear. Is it ok you are able to see.? So, this is x equal to y equal to z equal to 0 that point. So,
43:58
let us consider some d A n here we shine light on it. So, there will be a shadow. How it
44:05
is? What is the deflection from the horizontal from one of the axis is basically a pi, that is the pi
44:11
is this angle Azimuthal. But with compared to the vertical how much
44:17
it is deflected that is the theta. So, this theta pi is a very important rotation which is using in radiative transfer.
44:24
So, zenith angle. This you can on the coordinate system. You have now x y z some point which is given by
44:53
x 1 y 1 z 1, this point can also be described
45:09
the coordinates of this point as r theta pi, where r is basically of course, this is considered as 000.
45:21
So, we introduce a spherical coordinate system basically for the convenience are
45:29
operationally convenient for us to understand concepts in radiation. Therefore, the spherical coordinate system becomes imperative, it becomes essential. Along with the spherical
45:39
coordinate system, we have to include the solid angle because, the radiation is spreading in a three dimensional fashion.
45:45
Now, can we revisit that d A n. Can you write d A n in the r theta coordinates? That is
45:51
d A n and then take d A n by r squared. Can you get an expression for the elemental solid angle?
45:57
For a differential area d A 1, put the differential area d a n in terms of r theta and pi. Maybe
46:06
I can draw a figure and that will help you.
46:12
Let’s look at the solid angle subtended by the same d A n. So, this is my d a 1. So,
47:09
now, instead of putting the area like this, I can make it clearer. I take a point here. This must be p
47:40
right put r with d theta this is theta. So, you get vector
47:56
Now, what is this? r.
48:03
Good r pi theta. So, what about this fellow? So, this area
48:11
under consideration; so this is my d a n. Please note,
48:20
solid angle subtended by an elemental area d a n at a point on d a 1 where d a 1 is that
48:28
area which is emitting the radiation and d a n is that elemental area which is receiving the radiation. So, you need a undertaker; d a 1 is emitting surface. From there, radiation
48:39
is spreading in all the directions. Among all the directions we are taking, 1 d a n a small elemental area and find out how much it is
48:46
capturing. I am writing it in terms of fundamental coordinates. As r keeps on increasing the
48:53
fraction, it captures will keep decreasing. Is it not?
48:59
For the same area, so this water bottle is generating radiation. I am capturing the radiation
49:06
with this chalk piece. This area is fixed this area is fixed; if this chalk piece is
49:11
moved away and away? What will happen? The amount of radiation which is falling on the surface less
49:17
and even at the same radius depending on the direction it can be it can change. Are you
49:23
getting the point? So, if you put it like this it cannot do much; if it is vertical it.
49:29
Now, what is this? So, what is this now tell me? Very good already you are . So, r sin
49:37
theta. So, this fellow is r sin theta d pi. Therefore omega equal to d a n by r square
49:49
d a n is r sin theta d pi r d theta 2 therefore, omega
49:59
is equal to sin theta d theta. . So, what will be the total solid angle associated
50:29
with the elemental area d a 1? That is radiation is falling on to a hypothetical
50:35
hemisphere above it what should be the solid angle.
50:41
I will just close in two minutes.
50:48
Total solid angle; so the pi will vary from 0 to 2 pi and theta will vary from 0 to pi
51:17
by 2 sorry hemisphere is pi by 2 sin theta d theta d
51:32
pi. So, therefore, the total solid angle associated with
51:40
the hemisphere is 2 pi is the radian. The total solid angle associated with the sphere will be 4 pi steradian. So, total angle associated with
51:51
the circle was 2 pi. The total plain angle associated with semicircle is.
52:01
Pi. Hemisphere is. 2 pi double of Solid angle. Hemisphere is.
52:06
2 pi. Full sphere is. 4 pi. we will close. Tomorrow we will find out we
52:12
will introduce an important concept called radiation intensity. I will work with solid angles and see how intensity. Once you have intensity how you can calculate flux. From
52:20
finally, we are interested in the flux, but solid geometry is inevitable without solid geometry. We cannot proceed. You can work with x y z
52:29
also, but it is very tedious. It is better to work with r theta pi.