Image Formation by Mirrors
Fundamentals of Mirrors and Light Reflection
A mirror is a highly polished surface that is usually made of glass coated with silver or aluminum on one surface. Optical mirrors are categorized based on their geometric curvature:
Plane Mirrors: Characterized by a completely flat reflecting surface.
Spherical Mirrors: Characterized by a curved reflecting surface that corresponds to a section of a sphere.

Reflection is defined as the bouncing of light when it hits a barrier or a boundary of another medium. The geometry of reflection relies on three key parameters:
Incident Ray: The light ray traveling toward and striking the reflecting boundary.
Normal: An imaginary line constructed perpendicular to the reflecting surface at the point of incidence ().
Reflected Ray: The light ray bouncing away from the surface from the point of incidence.
Angle of Incidence ( or ): The angle measured between the incident ray and the normal.
Angle of Reflection ( or ): The angle measured between the reflected ray and the normal.

The Laws of Reflection
The behavior of reflected light is governed by two physical laws:
The incident ray, the reflected ray, and the normal to the reflecting surface at the point of incidence all lie on the same geometric plane.
The angle of incidence is equal to the angle of reflection:
Types of Light Reflection
Reflection from surfaces is classified into two primary types based on the smoothness of the boundary interface:
Specular Reflection
Specular reflection occurs when light-reflecting objects reflect rays of light in an orderly, parallel pattern. This type of reflection is observed on smooth, polished surfaces.
Examples: Mirrors, polished metals, and still water.
Characteristics: Produces clear, sharp, and well-defined reflections.

Diffuse Reflection
Diffuse reflection occurs when light reflects off a rough or irregular surface, causing the rays to scatter in many random directions.
Examples: Paper, cloth, walls, and most everyday unpolished objects.
Characteristics: Enables non-shiny objects to be visible from multiple angles, but does not produce a clear or defined image.

Classification of Optical Images
Images produced by optical systems are divided into two fundamental classes: real images and virtual images.
Real Images
Formed by the actual, physical convergence or intersection of real rays of light.
Can be projected and captured onto a physical screen.
Always inverted relative to the orientation of the object.
May be larger than, smaller than, or the same size as the object.
A small aperture (a small hole or opening through which light passes) can be utilized to form real images.
Virtual Images
Formed by diverging light rays that only appear to diverge from or converge at a common point behind the reflective surface.
Cannot be projected onto a physical screen.
Always upright (erect) relative to the orientation of the object.
May be larger than, smaller than, or the same size as the object.
Image Formation in Plane Mirrors
Law of Plane Mirrors and Lateral Inversion
When observing an object placed in front of a flat plane mirror, the reflected image exhibits lateral inversion: the left and right orientations are interchanged. When an observer raises their right hand, the corresponding reflection raises what appears to be its left hand.

The law of plane mirrors defines the spatial and geometric properties of images formed by flat reflecting surfaces:
Where:
: Distance of the object from the mirror surface.
: Distance of the image from the mirror surface (the negative sign indicates that the image is virtual and located behind the mirror).
: Physical size (height) of the object.
: Physical size (height) of the image.
Summary of Plane Mirror Image Characteristics
Orientation: Upright (erect).
Nature: Virtual (cannot be projected on a screen).
Lateral Sense: Laterally reversed (left-to-right inversion).
Magnification: Equal size to the object ().
Distance: Equidistant ( behind the mirror plane).
Worked Example: Plane Mirror Distance
Problem: If an individual stands directly in front of a plane mirror, calculate the total distance separating the individual and their reflected image.

Solution:
For plane mirrors, the object and its virtual reflected image lie along the same line perpendicular to the reflective boundary. The object distance and image distance are equal in magnitude:
Geometry and Types of Spherical Mirrors
A spherical mirror is modeled as a reflecting segment cut from a hollow sphere. Spherical mirrors are divided into two classifications depending on which surface is reflective:
Concave Mirror: A spherical mirror whose reflective boundary is the inner hollow surface of the sphere.
Convex Mirror: A spherical mirror whose reflective boundary is the outer protruding surface of the sphere.
An everyday example is a metal spoon: the inner scoop functions as a concave mirror, while the curved back functions as a convex mirror.

Ray Optics and Image Formation in Concave Mirrors
Image formation in concave mirrors depends on the position of the object along the principal axis relative to the center of curvature (), principal focus (), and vertex (). There are six distinct cases:
Case 1: Object at an Infinite Distance
Incident light rays arriving from an object located at infinity () travel parallel to the principal axis. Upon reflection, all parallel rays converge at the principal focus ().
Image Location: At the principal focus ().
Image Nature: Real.
Image Orientation: Inverted.
Image Size: Point-sized (highly diminished).

Case 2: Object Located Beyond the Center of Curvature ()
An object is placed along the principal axis beyond . Two rays trace the image of point :
Ray 1: Travels parallel to the principal axis from and reflects through the focal point .
Ray 2: Passes through the center of curvature and strikes the mirror normally, reflecting back along its own path.
The intersection of the reflected rays forms image point . The base along the axis corresponds to point .
Image Location: Between and .
Image Nature: Real.
Image Orientation: Inverted.
Image Size: Smaller than the object (diminished).

Case 3: Object Located at the Center of Curvature ()
An object is positioned directly on the center of curvature ():
Ray 1: Leaves parallel to the principal axis and reflects through focal point .
Ray 3: Leaves passing through focal point and reflects parallel to the principal axis.
Reflected rays intersect directly beneath the object at point .
Image Location: At the center of curvature ().
Image Nature: Real.
Image Orientation: Inverted.
Image Size: Same size as the object.

Case 4: Object Located Between the Center of Curvature () and Principal Focus ()
When the object is positioned between and :
Ray 1: Proceeds parallel to the principal axis and reflects through .
Ray 2: Extends along a line passing through the center of curvature , striking the mirror and reflecting back through .
The intersection occurs beyond the center of curvature.
Image Location: Beyond the center of curvature ().
Image Nature: Real.
Image Orientation: Inverted.
Image Size: Larger than the object (magnified).

Case 5: Object Located at the Principal Focus ()
When the object is positioned directly at the principal focus ():
Ray 1: Runs parallel to the principal axis and reflects through focal point .
Ray 2: Aligns with the line passing from the center of curvature through tip , reflecting directly back along that axis.
The reflected rays are parallel to each other and do not intersect.
Image Location: At infinity.
Image Nature: No real image is formed (or forms at infinity).
Image Characteristics: Parallel beams produced.

Case 6: Object Located Between Principal Focus () and Vertex ()
When the object is situated inside the focal length, between and :
Ray 1: Directs parallel to the principal axis and reflects through .
Ray 2: Aligns with the radial path from through , reflecting straight back.
The reflected rays diverge in front of the mirror and cannot converge to create a real image. Extending these reflected rays backward behind the mirror establishes an apparent intersection at point .
Image Location: Behind the mirror.
Image Nature: Virtual.
Image Orientation: Upright (erect).
Image Size: Larger than the object (magnified).

Image Formation in Convex Mirrors
Convex mirrors always form images that are smaller than the object, upright, virtual, and located behind the mirror.
As an object is brought closer to the convex mirror surface, the size of the virtual image increases incrementally, but it never matches or exceeds the physical size of the object.
Compared to plane mirrors, convex mirrors provide a significantly broader field of view, allowing observers to see over a wider area.
Applications: Automobile side-view mirrors (rearview mirrors) and specialized illumination reflectors.

Spherical Aberration and Parabolic Mirrors
Spherical Aberration
Spherical aberration is an optical imperfection inherent to spherical mirrors with large openings or apertures:
In spherical mirrors with wide apertures, incident light rays traveling parallel to the principal axis do not all converge at the exact same focal point.
Marginal parallel rays striking near the edge of the mirror reflect toward a point along the axis closer to the mirror surface.
Only paraxial rays—parallel incident rays striking near the vertex of the mirror—reflect precisely through the principal focus ().
This focal spread prevents sharp point focusing and results in distorted or blurred images.
Parabolic Mirrors
Parabolic mirrors are engineered to eliminate spherical aberration entirely:
Geometric Property: A parabolic reflective profile focuses all incoming parallel rays to a single, sharp focus regardless of aperture diameter. Reciprocally, any light originating at the focus reflects off the parabolic surface as a parallel beam.
Applications:
Solar Furnaces and Solar Cookers: Concentrate incoming parallel solar rays onto a single central point to produce intense thermal energy.
Flashlights and Automobile Headlamps: The filament of a bulb is positioned precisely at the principal focus of the parabolic reflector, projecting parallel beams of high intensity.
The Mirror Equation and Magnification
Mathematical Formulations
The mirror equation relates the object distance (), the image distance (), and the radius of curvature () or focal length (). Both distances ( and ) are measured from the vertex of the mirror along the principal axis.
In terms of radius of curvature ():
Since focal length is related to the radius of curvature by :
This mirror formula applies universally to both concave and convex mirrors.
Magnification
The lateral magnification () describes the ratio of image dimensions to object dimensions:
Where:
: Height of the image.
: Height of the object.
: Image distance.
: Object distance.
Sign Conventions for Mirrors
Quantity | Positive () Sign | Negative () Sign |
|---|---|---|
Object Distance () | Real object | Virtual object / image |
Image Distance () | Real image (in front of mirror) | Virtual image (behind mirror) |
Focal Length () | Concave (converging) mirror | Convex (diverging) mirror |
Magnification () | Upright (erect) image | Inverted image |
Image Height () | Upright (erect) image | Inverted image |
Quantitative Mirror Problem
Problem Statement
A high object is placed in front of a concave mirror having a radius of curvature equal to . Determine the image distance (), the lateral magnification (), the image height (), and the characteristics of the resulting image.
Given Values
Step 1: Calculate Image Distance ()
Apply the mirror equation expressed in terms of the radius of curvature:
Substitute the given values:
Step 2: Calculate Magnification ()
Apply the magnification equation:
Substitute and :
Step 3: Calculate Image Height ()
Relate magnification to image and object heights:
Image Characteristics
Position: Located in front of the mirror (between and ).
Nature: Real ().
Orientation: Inverted (, ).
Scale: Diminished or reduced in size ().