Stellar M22 Genel Satış Sunumu

Stellar M22

• Stellar M22 is a skin rejuvenation innovation that combines four technologies into one platform.

• It addresses over 30 skin problems and unwanted hair issues.

• It is suitable for patients of all ages, genders, and skin types.

• Stellar M22 is fully upgradeable, offering limitless possibilities.

Stellar M22 Platform Technologies

• Stellar IPL:

  • Uses OPT® (Optimal Pulse Technology).

  • Addresses more than 20 skin problems and provides hair removal applications.

• Multi-Spot™ Nd:YAG:

  • Offers advanced solutions for vascular problems using MSP™ (Multiple Sequential Pulsing).

• Q-Switched Nd:YAG:

  • Provides effective solutions for dark tattoos and skin pigmentation treatments.

• ResurFX™:

  • Employs fractional non-ablative laser technology without requiring consumables.

Stellar M22 Overview

• Features a touchscreen.

• Includes a light/laser emission button.

• Has connectors for ResurFX, IPL, Multi-Spot, and Q-Switched Nd:YAG handpieces.

• Equipped with an on/off switch and accessory storage.

• Incorporates an emergency stop button.

Stellar M22 Indications

• Vascular Lesions:

  • IPL: Superficial redness on the face, neck, and décolleté, primarily on the legs.

  • LP Nd:YAG: Deep lesions, mainly on the legs.

• Pigmented Lesions:

  • IPL: Benign epidermal lesions.

  • QS Nd:YAG: Dark tattoos and benign dermal hypermelanosis.

• Skin Treatments:

  • IPL: Photorejuvenation and inflammatory acne.

  • QS Nd:YAG: Skin toning.

  • ResurFX: Non-ablative fractional skin resurfacing.

• Hair Removal:

  • IPL for hair removal.

IPL Technology (Stellar IPL)

• IPL (Intense Pulsed Light) was one of the first energy-based technologies in aesthetics.

• Lumenis received FDA approval for its IPL device in 1995.

• IPL is considered the gold standard for photofacial treatments due to its effectiveness, safety, and ability to treat a wide range of indications.

• It offers optimal combinations of wavelengths.

• IPL is used for fotorejuvenation, pigmented lesions, vascular lesions, acne, and hair removal.

• Lumenis IPL has the most peer-reviewed studies, with over 100 scientific articles.

Historical Innovations in IPL Technology:

• 1993: IPL invented by Lumenis.

• 1996: EpiLight - first single-application IPL system.

• 1998: VascuLight - first multi-application & multi-technology platform (IPL & Nd:YAG).

• 2000: Quantum - second-generation IPL multi-application & upgradeable platform.

• 2003: Lumenis One - third-generation multi-application, multi-technology platform; includes IPL, Nd:YAG, and LightSheer technologies; OPT® with IPL technology invented.

• 2010: M22 - 4th generation multi-application platform with IPL+ Nd:YAG.

• 2013: ResurFX for M22

• 2014: QS for M22

• 2015: New notch filters: Vascular & Acne. Advanced OPT system introduced.

• 2020: Stellar M22 - 5th Generation Multi-Application Platform. New industrial design, larger screen, new GUI; Ergonomic IPL handpiece with longer light guides designed considering usability.

Stellar™ IPL - Clinical Indications

• Treats 23 different problems with one handpiece and 9 Expert Filters:

  1. Acne

  2. Angiomas

  3. Benign cutaneous vascular lesions

  4. Benign epidermal lesions

  5. Cutaneous lesions

  6. Dyschromia

  7. Ephelides (freckles)

  8. Erythema from rosacea

  9. Facial telangiectasias

  10. Epilation

  11. Hemangioma

  12. Hyperpigmentations

  13. Leg telangiectasias

  14. Leg veins

  15. Melasma

  16. Poikiloderma of Civatte

  17. Port-wine stains

  18. Scars

  19. Spider angiomas

  20. Striae (stretch marks)

  21. Telangiectasias on the trunk

  22. Venous malformations

  23. Warts

Stellar™ IPL - Four Different Treatment Groups:

• HR – Hair Removal

• VL – Vascular Lesions

  • Benign cutaneous vascular lesions

• ST – Skin Treatments

  • Aesthetic and cosmetic applications requiring selective photothermolysis

  • Mild to moderate acne

• PL – Pigmented Lesions

  • Benign epidermal lesions

Stellar™ IPL - Components:

• 9 Expert Filters: 515, 560, 590, 615, 640, 695, 755 nm, Acne and Vascular

• 3 SapphireCool™ light guides: 15 mm x 35 mm, 8 mm x 15 mm, and 6 mm (round)

Stellar™ IPL - ExpertFilters™

• Cutoff Expert Filters

  • 7 long-pass cutoff filters

  • Example: 515nm filter blocks wavelengths below 515 nm and allows wavelengths above 515 nm up to 1200nm to pass through.

• 2 Notch Filters

  • Example: Acne filter blocks all wavelengths between 600 and 800 nm while allowing 400-600 & 800-1200nm pass through.

• Cut-off filters vs. Notch filters

Stellar™ IPL - ExpertFilters™ Advantages:

• Personalized treatment protocols

• Fast & effective treatments (changeable in seconds)

• Short treatment durations

• Saves storage space

• High efficiency, low-cost ratio

Stellar™ IPL - ExpertFilters™

• 9 Interchangeable Filters

  • 515nm: Rosacea, Mild Pigmentation

  • 560nm: IPL Skin Treatments, Vascularity

  • 590nm: IPL Skin Treatments, Pigmentation, Vascularity, Facial vessels

  • 615nm: Larger facial vessels, pigmentation

  • 640nm: Hair Removal, Light skin tone

  • 695nm: Hair Removal, Vascular Lesions

  • 755nm: Hair Removal, Dark skin tone

  • Acne filter: Acne vulgaris

  • Vascular filter: Different types of vascular lesions

Stellar™ IPL - Filter Penetration:

• Cutoff Expert Filter Penetration

• Wavelengths: 515nm, 560nm, 590nm, 615nm, 640nm, 695nm, 755nm

Stellar™ IPL - IPL – Acne and Vascular Notch Filters:

• Vascular filter

  • Wavelength: 530-650 & 900-1200 nm

  • Designed for fine telangiectasia treatments.

  • Shorter wavelengths target hemoglobin in superficial blood vessels.

  • Longer wavelengths are also absorbed by hemoglobin and target deeper blood vessels.

• Acne filter

  • Wavelength: 400-600 & 800-1200 nm

  • Shorter wavelengths target porphyrins and hemoglobin in superficial blood vessels.

  • Longer wavelengths are absorbed by hemoglobin and target deeper blood vessels going to the sebaceous gland.

  • This will cut off blood flow to the sebaceous glands, causing their destruction.

Stellar™ IPL - SapphireCool™ Light Guides:

• Contact cooling maximizes patient comfort and treatment safety.

• Fast: Quickly change light guides to treat larger or smaller areas.

• A face treatment can be done in 15 minutes and leg hair removal in 25 minutes with a large spot and high repetition rate.

• The small, round light guide (diameter: 6 mm) requires extra fluence for small lesions.

• Computer-assisted light guide recognition adds an extra safety advantage and increases ease of use.

• Spot Sizes: 15 mm x 35 mm, 8 mm x 15 mm, 6 mm

Stellar™ IPL - OPT® (Optimal Pulse Technology):

• OPT gives Stellar M22 the ability to control the IPL pulse shape.

• Energy can be delivered in a single pulse or in sequential pulses.

• Lumenis OPT® Advantages:

  • Pulse shape is controlled by evenly distributing energy throughout the entire pulse train or sequential pulses.

  • Gentler, more comfortable, and patient-friendly applications are performed at lower and effective fluence levels.

  • High peak power, shorter pulses – ideal for IPL skin applications in photorejuvenation and treatment of benign pigmented lesions.

  • Advanced OPT technology makes it possible to determine separate fluence levels for each sub-pulse when using multiple sequential pulses (MSP™), allowing precise adjustment of treatment parameters.

Stellar™ IPL - OPT® Benefits:

• Enables the use of lower fluence levels for effective treatment results:

  • Safe: Eliminates the initial peak energy at the beginning of the pulse, minimizing unwanted side effects on the skin.

  • Effective: Energy added towards the end of the pulse contributes to treatment by including the normally ineffective low-energy area.

  • Repeatable: Homogeneous, “squared” energy distribution ensures consistency and repeatability of treatments.

Stellar™ IPL - MSP™ (Multiple Sequential Pulsing):

• Stellar M22 provides the ability to use Multiple Sequential Pulses (MSP™).

• MSP™ allows cooling between pulses to ensure safety during treatment.

• Energy is transmitted during pulses

• Tissue absorbs during delay times

• More energy can be safely delivered to the target while allowing surrounding tissues to cool.

Stellar™ IPL - Treatment of Chromophores:

• Selectively Treats Red, Blue, and Brown with a Single Handpiece

• Stellar IPL has the ability to selectively target reds, even in the presence of blues.

• With Stellar IPL's advanced features such as multiple filters, control over pulse shape, size, duration and delay, and wavelength adjustment, each selected target can be successfully eliminated.

Stellar™ IPL - Characteristics:

• ExpertFilters™ - Cutoff Filters

  • Wavelength/Spectrum: 515-1200nm

  • Filters: 515, 560, 590, 615, 640, 695, 755 nm

• Expert Filters™ - Notch

  • Acne filter* spectrum: 400-600 & 800-1200 nm

  • Vascular filter* spectrum: 530-650 & 900-1200 nm

• SapphireCool™ Light guides

  • Rectangular: $8x15 \text{ mm}^2$ and $15x35 \text{ mm}^2$

  • Circular*: Ø 6 mm

• Fluence

  • Rectangular spot: $10-35 \text{ J/cm}^2$

  • Circular spot: $16-56 \text{ J/cm}^2$

• Multiple synchronized pulses: Single / Double / Triple

• Pulse duration: 4-120 ms

• Inter-pulse delay time: 5-150 ms

• Repetition rate: Up to 1 Hz

Stellar™ IPL - Application Screen

• VL - Vascular Lesions

• ST- Skin Treatments

• PL - Pigmented Lesions

• HR - Hair Removal

Stellar™ IPL - Selected Preset Screen - Skin Treatments

• Allows selection of presets for skin treatments based on skin type, primary condition (e.g., rosacea, erythema, melasma, acne), and lesion depth.

Stellar™ IPL - Selected Preset Screen - Pigmented Lesions

• Allows selection of presets for pigmented lesions based on skin type, lesion type (e.g., lentigines, keratosis, cafe-au-lait), lesion intensity, and lesion depth.

Stellar™ IPL -IPL Main Treatment Screen

1. Main screen.

2. Application selection window.

3. Clinical Indication selection window.

4. User settings save window.

5. Tools menu.

6. Basic mode.

7. Advanced mode.

8. Name of connected technology.

9. Filter wavelength for IPL or light guide / spot size for lasers.

10. Treatment mode.

11. Area to adjust pulse parameters.

12. Fluence adjustment area.

13. READY mode button.

14. Progress bar shown when switching the system from STANDBY mode to READY mode.

15. STANDBY mode button.

16. Select round type light guide.

17. Select rectangular type light guide.

18. Chiller (skin cooling) on / off button.

19. Shot counter and treatment reset button.

20. Clinical indications

Stellar™ IPL - Basic Mode

• In basic mode, the user can only change the fluence level; they cannot change the pulse duration or pulse delay.

• This is a great starting point for new users.

Stellar™ IPL - Comparison of Normal and Basic Presets - Example for Vascular Lesions

• Normal mode allows for detailed adjustments of various parameters, while basic mode simplifies the settings for ease of use.

Stellar™ IPL - Advanced OPT (AOPT)

• When MSP™ is used, it allows customization of pulse duration and delay, as well as fluence level in each sub-pulse.

• This enables expert users to make detailed adjustments to treatments.

Stellar™ IPL - System Components (IPL basic configuration):

• Main Parts Quantity

  • Stellar M22 system 1

  • Stellar M22 mobile unit 1

  • Stellar IPL Handpiece 1

  • Expert Filters: 515nm, 560nm, 590nm, 615nm, 640nm and 695nm 6

  • SapphireCool Light Guide 15x35mm 1

  • SapphireCool Light Guide 8x15mm 1

  • SapphireCool Light Guide 6mm round 1

  • Protective Eyewear for User 2

• 755nm, Acne and Vascular filters are not included.

Stellar™ IPL - Treatment B&A – Skin rejuvenation

• Before and after photos showing skin rejuvenation results after 7 sessions, 4 months later.

• Clinical parameters: 560 nm filter, 12-16 $J/cm^2$, 3 ms double pulse, 20 ms – delay time
  590 nm filter, 16-20 $J/cm^2$, 3 ms triple pulse, 30 ms – delay time

Stellar™ IPL - Treatment B&A – Lentigos

• Before and after photos showing skin rejuvenation results after 2 sessions, 3 months later.

• Clinical parameters: 560 nm filter, 16-17 $J/cm^2$, 3.5 ms double pulse, 20 ms – delay time

Stellar™ IPL - Treatment B&A – Rosacea Treatment

• Before and after photos showing Rosacea treatment results.

Stellar™ IPL - Treatment B&A – PWS

• Before and after photos showing Port Wine Stains treatment results.

Stellar™ IPL - Treatment B&A – Hair Removal

• Before and after photos showing hair removal results after 6 sessions.

Stellar™ IPL - Treatment B&A – Freckles

• Before and after photos showing freckles treatment results after 8 sessions, 1 month later.

• Clinical parameters: 560 nm filter, 12-18 $J/cm^2$, 3 ms double pulse, 20 ms – delay time
  590 nm filter, 16-22 $J/cm^2$, 3 ms triple pulse, 30 ms – delay time

Stellar™ IPL - Treatment B&A – Vascular solution

• Before and after photos showing Vascular solution treatment results after 3 sessions, 3 months later.

• Clinical parameters: Vascular filter, 12-16 $J/cm^2$, 3&5 ms double pulse, 20 ms – delay time

Stellar™ IPL - Treatment B&A – Active Acne

• Before and after photos showing Active Acne treatment results after total of 6 treatments, 4 seans sonra

• Step 1: Full face, large lightguide, 590nm filter, Fluence 13-15$J/cm^2$, Double pulse 4ms, with 30-40ms delay, 2 passes
  Step 2: Acne area only, small lightguide, Acne filter, Fluence 14-15$J/cm^2$ (skin type III) or 12-13$J/cm^2$ (skin type IV), Double pulse 4ms, with 20-30ms delay (skin type III) or 25-35ms (skin type IV), 1 pass

ResurFX™ - Gerçek Fraksiyonel Non-Ablatif Cilt Yenileme

• External module; installation is carried out by an authorized service engineer.

• Application: fractional non-ablative skin resurfacing

• Technology: 1565 nm Er:Glass fiber laser

ResurFX - Endikasyonlar

◆ Akne skarları

Yumuşak doku koagülasyonu

◆ Diskromi

Melazma

Periorbital kırışıklıklar

◆ Cilt yenileme

Stria

Cerrahi skarlar

ResurFX - Why 1565nm?

• Soft tissue is an organic compound composed primarily of water and structural proteins.

• At a wavelength of 1565nm, the primary chromophore is water, and the laser absorption level of other chromophores is low, which allows light energy to penetrate deep dermal layers.

ResurFX – Fraksiyonel Non-Ablatif

• Fractional non-ablative skin resurfacing

• Narrow and deep coagulation columns are created with high-precision microbeams in the epidermis and dermis layers.

• The stratum corneum and surrounding tissues are not damaged.

• The natural healing process is stimulated

• New and healthy tissue is formed

• New collagen production begins

ResurFX - Histological Effects

• Coagulation depth and width based on energy settings (Low, Medium, High)

• Energy (mJ) per µbeam.

• Coagulation depth (μm) Range: Low settings ($10-20$): $327-417$, Medium settings ($30-50$): $529-699$, High settings ($60-70$): $808-964$

• Coagulation width (μm) Range: Low settings: $87-103$, Medium settings: $139-148$, High settings: $178-184$

ResurFX - CoolScan™ Tarayıcı

• Advanced & easy-to-use scanner

• More than 600 combination options for best results

• Unique CoolScan scanning system

• Controlled and non-sequential shots

• The most advanced technology of the age

• Lumenis's expected innovative engineering

ResurFX - Teknik Özellikleri

• Dalga boyu: 1565nm fiber lazer (orta-kızılötesi)

• Mikro ışın: ~Ø110µm

• Mikro ışın enerjisi: 10-70mJ* (SapphireCool™ için geçerlidir. Precision Tip’in ayar seçenekleri kısıtlıdır.)

• Yoğunluk: 50-500 µbeams/cm²* (SapphireCool™ için geçerlidir. Precision Tip’in ayar seçenekleri kısıtlıdır.)

• 6 tarama şekli: Altıgen, Halka, Daire, Kare, Dikdörtgen, Çizgi

• Tarama boyutları* (mm): Ölçüler: Boyutlar yoğunluğa göre ayarlanabilir 5-18 (ext. Ø), 5-17 (ext. Ø), 5-17 (Ø), 5-12 (Side) =2 x Width, 5-16 (Length), 5-18 (Length)

• Tedavi başlığı: Hedef ışının optimal görünürlüğü için yan cam pencereye sahip, tekrar kullanılabilir 18 mm çaplı uç.

• Temaslı soğutma: Entegre edilmiş, 10°C

• Tekrarlama hızı: 2 saniyeye kadar

• İletim modu: CoolScan™ sıralı olmayan tarama

• Aktivasyon kaynağı: Başlık veya ayak pedalı ile kontrol

ResurFX Tarama - Şekil, Boyut & Yoğunluk

• Hexagon, Donut, Circle, Square, Rectangle, Line
  5 mm 8 mm 10 mm 12 mm 15 mm 18 mm

• 50 spots/cm2 400 spots/cm2 300 spots/cm2 200 spots/cm2 100 spots/cm2 500 spots/cm2

ResurFX - Avantajları

• The only true fractional non-ablative skin resurfacing system for the treatment of dyschromia, scars, stretch marks, and wrinkles.

• High-precision microbeams trigger a natural healing process by creating narrow and deep coagulation columns in the epidermis and dermis.

• State-of-the-art CoolScan™ system and contact cooling significantly increase patient comfort.

• Highly versatile – Provides over 600 combination options based on area shape, size, and density for optimal treatment from a single lesion to the entire face.

• Predictable and repeatable results are ensured through the most precise, homogeneous, and uniform microbeam energy delivery possible thanks to exceptional scanning capabilities:

• Only one pass is necessary for effective skin resurfacing, which shortens treatment time and protects the patient’s skin.

• Area coverage of up to 20% in a single pass when using the highest parameters.

• Average coverage rate of 6% in a single pass with recommended parameters.

• The treatment area can be clearly tracked thanks to the SapphireCool™ tip element.

ResurFX - Other Benefits

• Ergonomic and lightweight - Designed to provide ease of use

• Treatment-friendly - Offers ease of use with a targeting beam and clear visibility of the treatment area.

• Patient comfort - Contact cooling increases patient comfort.

• Easy-to-use options – Scanning can be controlled via the handpiece or foot pedal.

• There are no disposable materials.

ResurFX - Precision Tip

• For complex surface shapes: This tip does not contain sapphire glass, which is why external cooling is required during treatment.

• Energy and intensity are limited when using the Precision Tip as an added safety measure.

• Precision Tip is offered as a separate and optional accessory.

ResurFX - Application Selection Screen

• Allows selection of the application (e.g., skin resurfacing, dyschromia, acne scars) and displays current tip, energy, shape, size, density, repeat mode, total pulses, and total scan energy.

ResurFX - Parametre Seçimi

• Allows selection of parameters for skin treatments based on skin type, treatment type (e.g., skin resurfacing, periorbital wrinkles), and severity (mild, medium, severe).

ResurFX - Temel Mod

• In basic mode, the user cannot change the intensity.

• It is an ideal option as a starting point for new users.

ResurFX - Normal Temel Önayarlar

• Shows a comparison of normal and basic presets for skin treatments, highlighting the differences in available settings.

ResurFX - Tedavi Ekranı

• Kontrol kaynağı: başlık veya ayak pedalı

• 6 farklı tarama şeklinden seçim yapma imkanı

• Tarama boyutu seçimi

• Yoğunluk seçimi, 50 spot/cm²’lik artışlarla yapılır.

• Her mikro ışın (µbeam) için enerji seçimi, 1 mJ’lik artışlarla yapılır.

• Başlık soğutması AÇIK/KAPALI

• Tekrarlama hızı 0,5 saniyelik artışlarla ayarlanabilir.

• Tarama başına toplam enerji

• Hedefleme ışınının şiddeti

ResurFX Tedavisinden Hemen Sonra

• Shows a photo immediately after ResurFX treatment.

ResurFX Yükseltme Kit İçeriği

• Ana Parçalar Adet

• ResurFX Başlığı 1

• 18 mm ResurFX SapphireCool ucu 1

• Doktor lazer güvenlik gözlüğü 2

• Hasta lazer güvenlik gözlüğü 1

• Ayak pedalı 1

• Dahil değildir: Precision tip

Cilt Yenileme - ResurFX

• Full Face Resurfacing: Before and after photos of full face resurfacing after 3 sessions, 3 months later (treatment interval: 1 month). 3D view before and after treatment on the right cheek.
  43 mJ with 200 µbeams/cm2 + 50 mJ with 300 µbeams/cm2 small spot size on the largest spots + 50 mJ with 300 µbeams/cm2 parallel to the jawline 2 passes

Cilt Yenileme - ResurFX

• Textural Treatments, 300 μbeams/cm², 50mJ One session

Cilt Yenileme - ResurFX

• Dr. Matteo Tretti Clemtoni’nin izniyle Önce 3 seanstan 3 ay sonra (seans aralığı:1 ay) Striaların tabanına: 40 mJ ile 300 µbeams/cm2 + tüm alana: 50 mJ ile 150 µbeams/cm2 Cilt Yenileme - ResurFX Sağ göğsün tedavi öncesi ve sonrası 3D görünümü

Multi-Spot™ Nd:YAG - Endikasyonlar

• Derin telenjiektaziler

• Epilasyon

• Hemanjiyomlar

• Bacak damarları

• 4 mm’ye kadar retiküler damarlar

• Yüzeyel telenjiektaziler

• Yüzeyel kırışıklıklar

• Vasküler lezyonlar

Multi-Spot Nd:YAG

• 1064nm Nd:YAG laser

• Tek başlık

• 3 adet SapphireCool™ ile temaslı soğutma

• Hassas tedavi için spotlar: 2x4 mm²; 6 mm; 9 mm

• Bilgisayar destekli spot tanıma sistemi, ek güvenlik sağlar.

• Vasküler lezyonları ve özellikle derin damar bileşenlerini hedeflemede, IPL için ideal tamamlayıcı dalga boyudur.

Multi-Sequential Pulsing (MSP™) Özelliğine Sahip Tek Nd:YAG Lazer

• MSP™ epidermisi korur ve yüksek fluenslerin güvenle kullanılmasını sağlar.

• Vasküler lezyon tedavilerinde etkinliği artırır.

• Hedef  damar içindeki kanın koagülasyonu

• Tek atış  Yüksek fluens  Yüksek yan etki riski

• Multi-Sequential Pulsing  Daha düşük fluens  Düşük yan etki riski

• Lazer enerjisi atımlar sırasında iletilir ve gecikme sürelerinde doku soğur. Bu sayede hedef bölgeye daha fazla enerji güvenli bir şekilde aktarılır.

• Ne işe yarar? Çoklu Ardışık Atım (Multiple-Sequential Pulsing), atımlar arasında soğuma imkanı sağlayarak, koyu ten dahil tüm cilt tiplerinde epilasyonun veya damarsal lezyon tedavilerinin güvenli bir şekilde yapılmasını sağlayarak skar riskini azaltır.

Nd:YAG - Aplikasyon Ekranı

• VL Vascular Lesions

Nd:YAG - Ön Ayar Ekranı - Vasküler Lezyonlar

• Telangiectasia
  Leg Veins 2.0-4.0 mm
  Hemangioma
  Nodular Hemangioma
  Leg Veins 0.5-1.0 mm
  Leg Veins 1.0-2.0 mm

• Skin Type I-VI

• Lesion Depth
  Shallow
  Medium
  Deep

• Treatment Area
  Large
  Small

Nd:YAG - Tedavi Ekranı

• Shows the treatment screen for Nd:YAG with various options for spot size, fluence, and other parameters.

Multi-Spot™ Nd:YAG Yükseltme Kit İçeriği

• Ana Parçalar Adet
  Multi-Spot Nd:YAG Başlığı 1
  SapphireCool Spot - 2x4 mm2 1
  SapphireCool Spot - 6 mm 1
  Doktor lazer güvenlik gözlüğü 2
  Hasta lazer güvenlik gözlüğü 1
  Multi-Spot Nd:Yag kalibrasyon aracı 1
  Dahili değildir: • SapphireCool Spot - 9 mm

Treatment B&A

• Before After 5 treatments
  Nd:YAG 100J/cm2, 12 ms, 6 mm spot – kan akışının yavaş olduğu/cildin kalın olduğu bölgelerde
  Nd:YAG 80J/cm2, 10 ms, 6 mm spot – kan akışının hızlı olduğu / cildin ince olduğu bölgelerde
  ‘crossing’ tekniği ile IPL, 590 nm filtre, 18 J/cm2 4-4ms atış süresi, 15 ms bekleme süresi ve 560 nm, 18J/cm2 , 3-3 ms atış süresi, 20 ms bekleme süresi
  PWS – OPT ile Stellar IPL + Multi-Spot Nd:YAG

Q-Switched Nd:YAG - Lazer

• Quality-Switching is a technique for obtaining very short, high-power pulses from a laser.

• The intense and rapid heating caused by the absorption of the laser primarily leads to a photothermal effect.

• As the chromophore heats, it experiences intense thermal expansion, which creates shock waves in the form of audible popping sounds with each laser pulse.

• This photoacoustic effect generates mechanical forces that fragment the targeted chromophore.

QS Nd:YAG Laser - Applications

• QS Nd:YAG laser technology is suitable for applications requiring selective photo-mechanical/photo-acoustic effects.

  1. Pigmented lesions and ‘skin toning’ treatments

  2. Dark tattoo removal

• Offers a significant advantage in treating dark-skinned patients by minimizing the risk of post-application hyperpigmentation.

• Single handpiece for all Q-Switched applications

• Easy to use; no need to change the treatment head for different applications

• Optional, reusable metal tips are available for skin toning; all spot sizes (2, 2.5, 3.5, 4, 5, 8 mm) offer a variety of treatment options

• Single-use tips are available for tattoo removal treatments

QS Nd:YAG Laser - Homogenous Pulses

• The Lumenis QS pulse is a true 6-8 nsec pulse.

• The Top-Hat beam profile guarantees homogeneous distribution of energy in each pulse.

• This guarantees excellent treatment control and repeatability of results.

• Homojenleştirici ile Top-Hat ışın profili

• Homojenleştirici olmadan ışın profili

• The top view of the spectrum shows that the pulse is homogeneous.

• When viewed from the side, the Top-Hat beam profile can be clearly observed.

Q-Switched Nd:YAG - Teknik Özellikleri

• Dalga boyu 1064 nm

• Fluens 0.9 - 14 J/cm2

• Atım süresi 6-8 nsec

• Atım özelliği Top-Hat

• Tekrarlama hızı 0.5–5.0 Hz

• Spot büyüklükleri 2, 2.5, 3.5, 4, 5, 6 and 8 mm

Q-Switched Nd:YAG - Spot Size

Spot büyüklüğü (mm):2, 2.5, 3.5, 4, 5, 6 ,8

Fluens (J/cm