Biophysics_Lecture_2

Fundamentals of Work, Energy, and Power

  • Academic Context and Overview:

    • Biophysics course unit covering energy, work, fluid dynamics, and thermodynamic conservation principles.
    • Instruction delivered by Dr F.H Amos (MSc Biomed Eng (U.Z C.H.S), MBChB (U.Z C.H.S), BSc Mech Eng (E.I.T, Au)).
    • Core thematic scope includes types of energy, forms of energy, the law of conservation of energy, renewable and non-renewable energy sources, and mechanical work.
  • Definition and Mechanical Formulation of Work:

    • Energy represents the capacity or ability to perform work.
    • Work (WW) is the mechanical transfer of energy that occurs when an applied force causes a displacement.
    • Work formula:     W=F⋅Δd⋅cos⁡(θ)W = F \cdot \Delta d \cdot \cos(\theta)     where:
    • FF is the magnitude of the applied force.
    • Δd\Delta d is the magnitude of the displacement.
    • θ\theta is the angle between the force vector and the direction of displacement.
    • Line of action requirement: A force performs work on a particle if and only if the particle undergoes a displacement along the line of action of that force.
    • Directional conventions of work:
    • Positive work (W>0W > 0): Occurs when the force vector and the displacement vector act in the same direction.
    • Negative work (W<0W < 0): Occurs when the force vector opposes the direction of displacement.
    • Zero work (W=0W = 0): Occurs when the force vector is perpendicular to the displacement vector (θ=90∘\theta = 90^\circ, making cos⁡(90∘)=0\cos(90^\circ) = 0).
    • Units of measurement: Both work (WW) and energy (EE) are quantified in Joules (J\text{J}).
  • Fundamental Classification of Mechanical Energy:

    • When a physical body performs work, it possesses energy.
    • Kinetic Energy (EkE_k or KK):
    • Defined as the energy possessed by an object due to its motion.
    • Mathematical expression:       Ek=12mv2E_k = \frac{1}{2}mv^2       where mm is the mass of the object or particle and vv is its velocity.
    • Potential Energy (EpE_p or UU):
    • Defined as the energy associated with the relative position of a particle or the structural configuration of a mechanical system.
    • Gravitational potential energy expression:       Ep=mghE_p = mgh       where mm is mass, gg is acceleration due to gravity, and hh is height.
  • Power:

    • Power is defined as the time rate of doing work or transferring energy.
    • Average power (PavP_{\text{av}}) delivered by a system performing work WW across a time interval Δt\Delta t:     Pav=WΔtP_{\text{av}} = \frac{W}{\Delta t}
    • Expressed in Watts (W\text{W}), where:     1 W=1 J/s1\,\text{W} = 1\,\text{J/s}
    • Commercial energy billing unit: Electrical energy is commercially metered and sold by the kilowatt-hour (kWh\text{kWh}), which corresponds to:     1 kWh=1000 W⋅3600 s=3.6×106 J1\,\text{kWh} = 1000\,\text{W} \cdot 3600\,\text{s} = 3.6 \times 10^6\,\text{J}

The Work-Energy Principle and Mechanical Energy

  • The Work-Kinetic Energy Theorem:

    • The change in kinetic energy (ΔK\Delta K) of an object—defined as the final kinetic energy minus the initial kinetic energy—equals the net or total work (WW) performed on it by all acting forces:     ΔK=W\Delta K = W
    • Operational implications of the theorem:
    • If net work is positive (W>0W > 0), kinetic energy increases (K>K0K > K_0).
    • If net work is negative (W<0W < 0), kinetic energy decreases (K<K0K < K_0).
    • If net work performed by all acting forces is zero (W=0W = 0), kinetic energy remains constant (K=K0K = K_0).
  • Gravitational Potential Energy and Force:

    • Gravitational work performed on an object of mass mm raised from an initial height h0h_0 to a final height hh:     Wg=mgh0−mghW_g = mgh_0 - mgh
    • Absolute potential energy (UU) includes an arbitrary reference potential energy (UrefU_{\text{ref}}) along with gravitational work:     U=mgh+UrefU = mgh + U_{\text{ref}}
    • In simplified terms, the change in potential energy when mass mm is elevated from h0h_0 to hh is equal in magnitude and opposite in sign to the work done by the gravitational force:     ΔU=U−U0=−Wg\Delta U = U - U_0 = -W_g
  • Total Mechanical Energy Formulation:

    • Total work (WTotalW_{\text{Total}}) equals the sum of work done by applied forces (WaW_a) and work done by the gravitational force (WgW_g):     WTotal=Wa+WgW_{\text{Total}} = W_a + W_g
    • Applying the work-energy theorem:     K=K0+WTotal=K0+Wa+WgK = K_0 + W_{\text{Total}} = K_0 + W_a + W_g
    • Substituting Wg=−(U−U0)W_g = -(U - U_0):     K=K0−(U−U0)+WaK = K_0 - (U - U_0) + W_a
    • Rearranging into equation (a):     K+U=K0+U0+WaK + U = K_0 + U_0 + W_a
    • Total mechanical energy (EE) is defined as the direct sum of kinetic energy and potential energy:     E=K+UE = K + U
    • Expressing equation (a) in terms of mechanical energy:     E=E0+WaE = E_0 + W_aΔE=E−E0=Wa\Delta E = E - E_0 = W_a

Fluid Dynamics: The Continuity Equation

  • Volumetric Flow Rate (QQ):

    • Flow rate (QQ) represents the volume of fluid (VV) passing a given cross-sectional reference point per unit time:     Q=VtQ = \frac{V}{t}
    • Incompressible fluid behavior: For an incompressible fluid, density (ρ\rho) remains constant throughout the channel. Consequently, the volume of fluid passing through any section of the channel per unit second is invariable.
    • Flow conservation: Fluid flow entering one end of a conduit (such as an industrial pipe or an anatomical blood vessel), designated Q1Q_1, must strictly equal fluid flow exiting the opposite end, designated Q2Q_2:     Q1=Q2Q_1 = Q_2
  • Derivation of the Continuity Equation:

    • Consider a section of conduit having a uniform cross-sectional area AA, with the fluid passing across this plane at a uniform velocity vv.
    • Over a time interval Δt\Delta t, the fluid traverses an axial distance:     Δx=vΔt\Delta x = v \Delta t
    • The total volume (VV) of fluid displaced through this cross-section during Δt\Delta t is:     V=A⋅Δx=AvΔtV = A \cdot \Delta x = A v \Delta t
    • Dividing volume by time yields the flow rate equation:     Q=VΔt=AvQ = \frac{V}{\Delta t} = A v
    • The volumetric flow rate equals the product of cross-sectional area and fluid velocity.
    • For a conduit whose cross-sectional area transitions from A1A_1 to A2A_2, setting Q1=Q2Q_1 = Q_2 yields the standard continuity equation:     A1v1=A2v2A_1 v_1 = A_2 v_2

Fluid flow rate through uniform and narrowing channels illustrating the continuity equation

Fluid Dynamics: Bernoulli's Equation

  • Physical Principles and Foundational Assumptions:

    • Bernoulli's equation relates fluid pressure, flow velocity, and elevation height, modeling the hemodynamic and hydrodynamic behavior of fluids passing through channels of varying geometry.
    • Bernoulli's Principle states that as the linear velocity of a fluid increases, its static pressure decreases concurrently.
    • Bernoulli's relation is valid only when four prerequisite boundary conditions are satisfied:
    1. The fluid is incompressible (density ρ\rho remains constant across all points).
    2. The fluid is non-viscous (internal friction is absent, meaning zero mechanical energy is dissipated as heat).
    3. The flow is laminar and streamline (non-turbulent flow pathlines).
    4. Steady-state assumption: The velocity vector of the fluid at any specific spatial coordinate does not vary over the duration of observation.
  • Mathematical Formulation:

    • When all four conditions are met, the sum of the fluid static pressure and total mechanical energy per unit volume remains constant at every point in the flow stream:     P+12ρv2+ρgy=constantP + \frac{1}{2}\rho v^2 + \rho g y = \text{constant}
    • Evaluating between two discrete points (sections 1 and 2) along a continuous streamline:     P1+12ρv12+ρgy1=P2+12ρv22+ρgy2P_1 + \frac{1}{2}\rho v_1^2 + \rho g y_1 = P_2 + \frac{1}{2}\rho v_2^2 + \rho g y_2     where:
    • P1P_1 and P2P_2 represent the internal fluid pressure at each respective point.
    • 12ρv2\frac{1}{2}\rho v^2 represents the kinetic energy per unit volume.
    • ρgy\rho g y represents the gravitational potential energy per unit volume.

Fluid flow through a pipe of varying height and cross section demonstrating Bernoulli's equation

  • Coupled Application of Continuity and Bernoulli Equations:
    • In a narrowing horizontal pipe or tapering blood vessel (y1=y2y_1 = y_2):
    • According to the continuity equation (A1v1=A2v2A_1 v_1 = A_2 v_2), a decrease in luminal area (A2<A1A_2 < A_1) forces an increase in fluid velocity (v2>v1v_2 > v_1).
    • According to Bernoulli's equation, this acceleration produces an increase in kinetic energy density:       Ek=12ρv2E_k = \frac{1}{2}\rho v^2
    • To maintain a constant total mechanical energy sum, the internal hydrostatic pressure (PP) must drop within the narrower, higher-velocity segment.

The Law of Conservation of Energy

  • Fundamental Conservation Statement:
    • Energy cannot be created and cannot be destroyed; it only transforms from one physical form into another.
    • The total quantity of energy contained within an isolated system or object remains strictly constant over time.
    • In classical mechanics, the total mechanical energy (sum of kinetic energy KK and potential energy UU) of a closed system is conserved:     K1+U1=K2+U2K_1 + U_1 = K_2 + U_2

Roller coaster demonstrating mechanical energy conversion between kinetic and potential energy

  • Mechanical Energy Conversion in Oscillating Systems:
    • A swinging pendulum illustrates continuous reciprocal conversion between kinetic energy (KE\text{KE}) and gravitational potential energy (PE\text{PE}):
    • Position A (maximum displacement / apex):       ME=high PE+low KE\text{ME} = \text{high PE} + \text{low KE}       (Instantaneous velocity drops to zero; mechanical energy is primarily potential).
    • Path from A to B:       KE increasing,PE decreasing\text{KE increasing}, \quad \text{PE decreasing}       (Elevation decreases while the bob accelerates downward).
    • Position B (trough / lowest equilibrium arc):       ME=low PE+high KE\text{ME} = \text{low PE} + \text{high KE}       (Maximum velocity is achieved at minimum height).
    • Path from C to D:       KE decreasing,PE increasing\text{KE decreasing}, \quad \text{PE increasing}       (Velocity decreases as the bob climbs toward the opposite apex).
    • Position D (opposite apex):       ME=high PE+low KE\text{ME} = \text{high PE} + \text{low KE}

Pendulum trajectory displaying kinetic and potential energy trade-offs between positions A, B, C, and D

Fundamental Forms of Energy

  • Taxonomy of Energy Forms:

    • Energy manifests across eight primary forms:
    • Radiant energy
    • Chemical energy
    • Electrical energy
    • Nuclear energy
    • Thermal energy
    • Sound energy
    • Mechanical energy
    • Magnetic energy
  • Radiant Energy:

    • Also designated electromagnetic energy, defined fundamentally as the spatial movement and propagation of photons.
    • Biological dependency: All biological life on Earth is fundamentally dependent upon radiant energy emitted by the sun.
    • Common spectrum examples: Radio waves (including AM, FM, and TV broadcast bands), microwaves, and X-rays.
    • Solar energy utilization: Active solar technologies deploy photovoltaic panels and light absorption to transform radiant electromagnetic energy into chemical energy or electrical potential.
    • Spectral distribution of electromagnetic wavelengths:
    • Radio waves: Wavelengths greater than 1 cm1\,\text{cm}.
    • Microwaves: Approximately 1 cm1\,\text{cm} to 10−2 cm10^{-2}\,\text{cm} (with markings at 0.1 cm0.1\,\text{cm} and 10−2 cm10^{-2}\,\text{cm}).
    • Infrared (heat): Wavelengths spanning 10−2 cm10^{-2}\,\text{cm} to approximately 10−4 cm10^{-4}\,\text{cm}.
    • Visible light spectrum: Narrow band between 10−4 cm10^{-4}\,\text{cm} and 10−5 cm10^{-5}\,\text{cm}, spanning wavelengths from 700 nm700\,\text{nm} down to 400 nm400\,\text{nm}, ordered by decreasing wavelength: Red, Orange, Yellow, Green, Blue, and Violet.
    • Ultraviolet: Wavelengths ranging from 10−5 cm10^{-5}\,\text{cm} to 10−6 cm10^{-6}\,\text{cm}.
    • X-rays: Wavelengths spanning 10−6 cm10^{-6}\,\text{cm} to 10−8 cm10^{-8}\,\text{cm}.
    • Gamma rays: Extremely short wavelengths, measured at 10−9 cm10^{-9}\,\text{cm} and below.

Electromagnetic spectrum showing wavelength ranges and the visible light spectrum

  • Chemical Energy:

    • Energy stored within the chemical bonds holding atoms and molecules together.
    • Represents a manifestation of potential energy that remains locked until chemical bonds are broken or reorganized via reactions.
    • Primary energy reserves: Fossil fuels and biological biomass represent large reservoirs of stored chemical energy.
    • Manufactured and natural materials containing chemical energy: TNT (trinitrotoluene), baking soda, striking matches, petroleum, natural gas, propane, and coal.
  • Electrical Energy:

    • Defined physically as the kinetic energy produced by the movement and flow of electrons.
    • Natural occurrences: Atmospheric lightning and electrostatic charges (static electricity).
    • Modern harnessing constraints: Direct capture and storage of natural electrical bursts like lightning remains technologically unviable; electrical utilities instead generate current by driving industrial generators and mechanical turbines via diverse primary fuel sources.
  • Nuclear Energy:

    • Energy stored directly within the dense nucleus of an atom.
    • Distinct characteristics: Nuclear reactions release massive quantities of energy as light and heat via structural alterations in the subatomic composition (makeup) of atomic nuclei.
    • Operational applications: Naval submarines, utility power plants, and residential smoke detectors.
    • Fuel sources: Nuclear power generation facilities utilize radioactive elements, predominantly uranium, to produce high-pressure steam that drives electric power turbines.
  • Thermal Energy:

    • Defined as the internal kinetic energy of matter, comprising the microscopic vibration, translation, and rotational movements of atoms and molecules within a substance.
    • Origin: Generated directly by the motion of constituent particles.
    • Everyday