Chem II 6/15
Context and Overview of Laboratory Schedule
The day begins with the start of Chapter 17; however, the laboratory experiment regarding Le Chatelier's principle is described as short and easy.
The lecture covers the theoretical aspects of Le Chatelier's principle within the first hour of the session, followed by the practical application in the lab.
The laboratory portion is expected to conclude within approximately one to one and a half hours, allowing for a shorter overall academic day.
Fundamental Concepts of Chemical Equilibrium
Definition and Nature of Equilibrium:
Chapter 16 focuses on chemical equilibrium, representing the state at the end of a chemical reaction.
Macro scale: At equilibrium, it appears the reaction has concluded because no further reactants are consumed and no additional products are generated. Concentrations remain constant.
Molecular (Micro) scale: The reaction is dynamic. Both the forward and reverse reactions continue to occur, but they happen at equal rates ().
Equilibrium vs. Kinetics:
Chapter 15 focused on kinetics: the beginning of a reaction, its speed, and factors affecting rates.
Chapter 16 focuses on equilibrium: the terminal state where concentrations are stable.
Significance of Studying Equilibrium:
Contrary to introductory chemistry assumptions that all reactions go to 100% completion, the vast majority of reactions do not consume all reactants.
Equilibrium studies allow scientists to determine the ratio of products to reactants at the end of a process.
Insight into Reaction Stability: Knowledge of equilibrium indicates whether chemicals can be stored together safely. If they do not react significantly (favoring reactants), they are stable. If they react vigorously (favoring products), they cannot be stored together.
Manipulation: Understanding equilibrium allows for the manipulation of conditions to either maximize or minimize product yield.
The Equilibrium Expression ()
General Expression: For any balanced chemical reaction, the equilibrium constant () is defined as:
Species Inclusion: Only species in the gaseous () or aqueous () phases are included in the expression. Solids () and pure liquids () are omitted.
Interpreting the Magnitude of :
Large (): Indicates a high concentration of products and a low concentration of reactants. The reaction is said to "favor products" or "lie to the right."
Small (): Indicates a low concentration of products and a high concentration of reactants. The reaction is said to "favor reactants" or "lie to the left."
: Indicates approximately equal amounts of reactants and products. Neither side is favored.
Teeter-Totter Metaphor:
If is large, the scale tips heavily toward products.
If is small, the scale tips heavily toward reactants.
If , the scale is balanced.
Solving for Equilibrium Concentrations using the ICE Table
An ICE (Initial, Change, Equilibrium) box—also referred to as a "ricebox"—is used when initial concentrations are known and equilibrium concentrations must be determined.
Phase Requirements: Values entered into an ICE table must be in Molarities () or Partial Pressures (). Moles, grams, or other units must be converted first.
Case Study 1: Hydrogen and Iodine Reaction
Reaction:
Temperature:
Initial Conditions: of and of in a flask.
ICE Table Setup:
Initial (I): , , .
Direction of Shift: Since is zero, the reaction must move to the right to reach equilibrium.
Change (C): Based on stoichiometry: for , for , and for .
Equilibrium (E): , , .
Mathematical Solution:
Expression:
Substitution:
Simplify the denominator (FOIL):
Multiply both sides:
Distribute:
Rearrange to standard form ():
Identify coefficients: , ,
Applying the Quadratic Formula:
Formula:
Substitution:
Two possible values: , .
Validating the Value of :
Selection criteria:
cannot be negative.
cannot be larger than the initial concentration of reactants (as you cannot consume more than you have).
Since the initial Concentration of is , and would lead to a negative equilibrium concentration (), it is invalid.
Correct value: .
Final Equilibrium Concentrations:
Check:
ICE Tables with Partial Pressures
Partial pressures follow the same ICE methodology as molarity calculations.
Temperature depends on , but temperature values are often extraneous information in the math unless converting between and .
Case Study 2: Carbon Monoxide and Water
Reaction:
at .
Initial partial pressures: , , , .
Equilibrium line: , , , .
Expression:
Calculated results: . (The negative root is discarded).
Final Equilibrium Partial Pressures:
, modified by sig figs.
.
Determining from Initial and Equilibrium Concentrations
This type of problem utilizes the ICE table to systematically organize data when one equilibrium value is provided.
Case Study 3: Finding
Initial , .
Analysis shows .
According to the ICE table change row, for HI, .
Therefore, .
Plug back into the equilibrium row expressions for the other reactants to find all numerical equilibrium values.
Plug the numerical concentrations into the expression: .
Key Takeaway: The value of remains constant for a reaction at a specific temperature, regardless of the initial starting amounts of reactants or products.
The Small K Approximation and the 5% Rule
Concept of Neglecting x: When is very small, very little product is formed. The concentration change () subtracted from the initial concentration of the reactant becomes mathematically insignificant relative to the starting amount.
Threshold: If , can usually be neglected from the reactant in the denominator.
Mathematical Advantage: Neglecting avoids the quadratic formula, often reducing the problem to a simple square root calculation.
Example:
The 5% Rule Validation:
After solving for using the approximation, you must verify the assumption was valid.
Rule:
If the value is less than 5%, the neglect of is valid. If it is greater than 5%, you must restart and use the quadratic formula.
The Reaction Quotient () and Predicting Reaction Direction
The Reaction Quotient (): Calculates the relative amounts of products and reactants present at any given moment in a reaction (not necessarily at equilibrium).
Mathematical Form: The expression for is identical to the expression for .
Direction of Shift Comparisons:
If : The ratio of products to reactants is too small. The reaction must shift to the right (produce more products) to reach equilibrium.
If : The ratio of products to reactants is too large. The reaction must shift to the left (re-form reactants) to reach equilibrium.
If : The system is currently at equilibrium.
Context: Used primarily when nonzero initial concentrations are provided for all reactants and products.
Le Chatelier's Principle
General Definition: If a system at equilibrium is disturbed by a change (stress), the system will shift in a direction that counteracts the change to reestablish equilibrium.
End Goal of Any Reaction: Equilibrium is the terminal destination; disturbances only prompt the system to seek that state again.
1. Changes in Concentration
Increase Concentration: The system shifts away from the increase to consume the extra substance.
Decrease Concentration: The system shifts toward the removal to replace the lost substance.
Limitation: This rule applies only to aqueous () and gaseous () species. Changing the quantity of solids () or liquids () does not shift the equilibrium because they are not part of the constant ratio.
Effect on : Changing concentrations causes a shift in the reaction, but the numerical value of the constant remains unchanged (the system moves to return to the specific ratio).
2. Changes in Temperature
Temperature is the only factor mentioned that changes the value of .
To predict the shift, heat must be treated as a physical component of the equation.
Exothermic Reactions (): Heat is a product.
Increase Temp (\text{heat}): Shift Left. decreases.
Decrease Temp (\text{heat}): Shift Right. increases.
Endothermic Reactions (): Heat is a reactant.
Increase Temp (\text{heat}): Shift Right. increases.
Decrease Temp (\text{heat}): Shift Left. decreases.
3. Changes in Pressure and Volume
Based on Boyle's Law: Pressure and Volume are inversely related ().
Only Gaseous Species Matter: Solids, liquids, and aqueous solutions are incompressible.
Identifying Moles of Gas: Sum the stoichiometric coefficients of all gases on the reactant side versus the product side.
Increase Pressure (Decrease Volume): The system is "squeezed." It shifts toward the side with fewer moles of gas to alleviate the pressure.
Decrease Pressure (Increase Volume): The system "expands." It shifts toward the side with more moles of gas to fill the space.
Effect on : No change to the value of .
4. Catalysts and Inert/Noble Gases
Catalysts: A catalyst increases the rate at which equilibrium is reached by lowering the activation energy, but it has no effect on the equilibrium position or the value of .
Inert/Noble Gases: Adding an unreactive gas (like Argon or Neon) increases the total pressure of the system but does not change the partial pressures of the reacting components. Therefore, there is no shift in equilibrium.
Questions & Discussion
Student Question: Why does in the quadratic equation?
Response: During the algebraic simplification of , expanding the numerator yields . When collecting terms on one side of the equation, the from the distributed denominator minus the from the numerator results in .
Student Question: What is the equilibrium shift when adding solid silver () to a reaction involving aqueous silver ions?
Response: There is no shift because solids are not included in the equilibrium expression. Changes in the amount of solid do not disturb the concentration ratio specified by .