biochem ch 10
Fats and oils are used as stored energy are derivatives of fatty acids:
Fatty acids: carboxylic acid functional group with hydrocarbon tails ranging from 4-36 carbons long (C4-C36); light and more energy dense per molecule due to their saturation
Hydrocarbon derivative
Oxidation of fatty acids (to CO2 and H2O) is highly exergonic
Can be saturated or unsaturated (double bonds)
Can be branched or unbranched
Branched fatty acid chains: major component of bacterial membranes; rare in internal human tissue
High concentration in human skin and vernix caseosa (waxy white substance around newborns)
Nomenclature of unbranched fatty acids:
The chain length and number of bonds, separated by a colon
Numbering begins at the carboxyl carbon
Position of double bonds are indicated by delta and a superscript number
Ex. [18:2(Δ9,12)] 18 total carbons (including carbonyl carbon), 2 double bonds, double bonds at C9 and C12
Omega nomenclature starts at the opposite non-carboxylic end with each double bond denoted with the omega (ω) sign
Carboxyl carbon is C1 and alpha carbon is C2
Common patterns in fatty acids:
Most common fatty acids have even numbers of carbon atoms in an unbranched chain of 12 to 24 carbons
In monounsaturated fatty acids, the double bond is usually between C-9 and C-10 (Δ9)
In polyunsaturated fatty acids, the double bonds are usually Δ12 and Δ15
Double bonds are usually separated by a methylene group
Double bonds are usually in the cis configuration (important when drawing)
Mammals cannot unsaturate past Δ9, therefore those are considered essential fatty acids that must be in the diet
Polyunsaturated fatty acids (PUFAs): contain more than on double double in their backbone
Humans must obtain omega-3 PUFA alpha-linolenic acid (ALA) from their diet and it is also used to synthesize EPA and DHA
Triacylglycerols are fatty acid esters of glycerol: major energy storage form
Triacylglycerols: simplest lipids constructed from fatty acids
Composed of three fatty acids, each in ester linkage with a single glycerol
The fatty acid present can be simple or complex and can each have variation
Non polar, hydrophobic
Synthesized by esterification of fatty acids to glycerols in the ER
Solubility of fatty acids: poor solubility due to nonpolar hydrocarbon chain
Increased chain length decreases solubility
Decreased double bond number decreases solubility
Carboxylic acid group is polar and ionized at neutral pH
Must always draw as COO-
Vertebrate store triacylglycerol in adipocytes (lipid droplet) and plants store them in the seeds
Melting point of fatty acids:
Extent of packing/solid depends on degree of saturation
More saturated tails → more van der waals → higher interaction → higher mp
At room temp:
Saturated fatty acids have a waxy consistency
Unsaturated fatty acids are oily liquids
Lipases: enzymes that catalyze the hydrolysis of stored triacylglycerols, releasing the fatty acids for export to site where they are required as fuel
Advantages to using triacylglycerols as stored fuels:
Fatty acid carbons are more reduced than sugar and oxidation of fatty acids yields more energy
More energy per molecule
Triacylglycerols are hydrophobic and unhydrated so organisms do not have to carry the extra weight of water hydration that is associated with stored polysaccharides
Lighter energy source
Provide insulation against low temperatures in mammals
Disadvantages to fats:
Brain prefers sugar
Slower to burn
Slower to digest
Very hard to move around the body due to their hydrophobicity
Partial hydrogenation: process that converts many of the cis double bonds in the fatty acids to single bonds
Increases melting temperature
Converts some cis double bonds to trans double bonds
Trans double bonds lead to trans fats which is linked to a higher incidence of cardiovascular disease by raising level of triacylglycerols in the blood, raising the level of LDL (bad) cholesterol in the blood, lowering the level of HDL (good) cholesterol, and increasing the body's inflammatory response
Increased shelf life and stability
Waxes serve as energy stores and water repellents:
Biological waxes: esters containing long chains (C14 to C36) saturated/unsaturated fatty acids with long chain (C16 to C30) alcohols
Higher melting point than triacylglycerols
Water repellent properties
Firm consistency
Membranes lipids can be classified based on their backbone structure and their head group
*Four general types of membrane lipids:
Phospholipids: have hydrophobic regions composed of two fatty acids joined to glycerol or sphingosine
Glycolipids: contain a simple sugar or a complex oligosaccharide at the polar ends
Sterols: compounds characterized by a rigid system of four fused hydrocarbon rings
Archaeal tetraether lipids: have two very long alkyl chains ether-linked to glycerol at both ends
Phosphatidic acid: two fatty acid chains bonded to a glycerol sugar and a phosphate group to the third
Derivatives would have another molecule connected to the phosphate group
Glycerophospholipids (phosphoglycerides): membrane lipids in which two fatty acids are attached in ester linkage to the first and second carbons of glycerol, and a highly polar or charged group is attached through a phosphodiester linkage to the third carbon (phosphate group bonded to the third glycerol and then to a polar or charged group on the other end)
A phosphodiester bond joins the head group to glycerol
The phosphate group can bear a negative, neutral, or positive charge
In general, glycerophospholipids contain:
A C16 or C18 saturated fatty acid at C-1
A C18 or C20 unsaturated fatty acid at C-2
Ether lipids: one of the two acyl chains is attached to glycerol in an ether linkage rather than ester
Chain can be saturated or unsaturated
Chain may contain a double bond in between C1 and C2
Counting begins on the carbon next to the oxygen
Vertebrate heart tissue is uniquely enriched with ether lipids and are theorized due to their resistance against degradation enzymes such as phospholipases
Platelet activating factor is another example of an ether lipid but serves as a potent molecular signal
Ether lipids are still considered glycerophospholipids due to their phosphate group and glycerol backbone
Sphingosine: amino alcohol monounsaturated chain that is fundamental structural backbone of sphingolipids
C-1, C-2, and C-3 of sphingosine are structurally analogous of the three carbons of glycerol in glycerophospholipids, however, there is an amino -NH2 group attached to C-2 and a double bond at C-4
Sphingolipids: large class of membrane phospholipids and glycolipids; derivatives of sphingosine
Have a polar head group and two nonpolar tails
Contain no glycerol backbone
Contain one molecule of the long chain amino alcohol sphingosine or one of its derivative
Ceramides: parent compound of all sphingolipids resulting when a fatty acid is attached in amide linkage to the -NH2 on C-2
Structurally similar to a diacylglycerol
Sphingomyelins: subclass of sphingolipids that contains phosphocholine or phosphoethanolamine as their polar head group
Derivatives of ceramides where a phosphocholine head group is attached to the C backbone and a fatty acid is attached in amide linkage to -NH2
Glycosphingolipids: have head groups with neutral 1+ sugars connected directly to the -OH at C-1 of the ceramide moiety
Do not contain phosphate
Occur largely in the outer face of plasma membranes
Cerebroside (one sugar), globoside (two+ sugars)
Cerebrosides: glycosphingolipid with a single sugar linked to C-1 ceramide
Neutral glycolipids, no charge at physiological pH 7
Globosides: glycosphingolipids with 2+ sugars linked to C-1 ceramide
Neutral glycolipids, no charge at physiological pH 7
Gangliosides: have oligosaccharides as their polar head groups with a sialic acid attached resulting in a negative charge
Can be any negative acid attached to the oligosaccharide attached to C-1
Sphingolipids at cell surfaces are sites of biological recognition
Degradation of phospholipids and sphingolipids:
Degraded by phospholipases and lysosomal enzymes in the lysosome
Two reasons for degradation:
Maintain membrane integrity
Degradation can be done to produce a signaling molecule (from the cut sugar of glycosphingolipids/gangliosides) without needing to produce a completely new signal molecule
Saves cell resources and energy
Genetic defects in these enzymes result in accumulation of gangliosides and subsequent disease
Sterols: structural lipids present in the membranes of most eukaryotic cells
have four fused carbon rings (ABCD), almost planar, and relatively rigid
Serve as precursors for products with specific biological activities
Cholesterol: major sterol in animal membranes
Amphipathic: polar, hydrophilic head group (-OH) and nonpolar hydrocarbon body
Membrane constituents
Four fused carbon rings
Precursor for steroid hormones and bile acids
Bile acids: polar derivative of cholesterol that emulsify dietary fats in the intestine to make them more readily accessible to digestive lipases
Active lipid
Phosphatidylinositol (PI) and its phosphorylated derivatives regulate cell structure and metabolism
PIP2 is present within the cytoplasmic face of plasma membranes and serve as a reservoir for messenger molecules that are released in response to extracellular signals
Membrane sphingolipids serve as sources of intracellular messengers by cleaving their sugars that are then released as a cellular signal and involved in regulation of: cell division, differentiation, migration, apoptosis
Eicosanoids are active lipids deriving from hormones that act as cellular messages/signals to nearby cells
Steroid hormones move through the bloodstream via protein carriers to target tissues and bind to highly specific receptor proteins in the nucleus triggering changes in gene expression
More polar than cholesterol
Mass spectroscopy can be used to identify individual lipids in complex mixture
It can determine the length of a hydrocarbon chain or positions of double bonds