AP Precalculus Topic 1.1 - Change in Tandem

Fundamental Concepts of Functions and Relations

  • Definition of a Function: A mathematical relation that maps a set of input values to a set of output values such that each input value is mapped to exactly 1 output value.

  • Explanation Requirement in AP Precalculus:

    • In prior mathematics courses, the "Vertical Line Test" was frequently cited to determine whether a graph represented a function.

    • In AP Precalculus, the statement "Each input has exactly one output" must always be used when explaining why a relation is a function, explicitly connecting inputs to outputs.

    • Reasoning: In Unit 3, polar functions are introduced. Polar graphs routinely fail the vertical line test despite being legitimate mathematical functions. Therefore, the vertical line test is not a mathematically valid explanation.

  • Domain: The set of all input values of a function, represented by the independent variable (typically xx or tt).

  • Range: The set of all output values of a function, represented by the dependent variable (typically yy or hh).

  • Positive Function: A function ff is positive on an interval when the graph of ff lies strictly above the xx-axis, meaning the output values (yy-values) are strictly greater than zero (y>0y > 0).

  • Negative Function: A function ff is negative on an interval when the graph of ff lies strictly below the xx-axis, meaning the output values (yy-values) are strictly less than zero (y<0y < 0).


Multiple representations and foundational definitions of functions

Representations of Mathematical Functions

Functions in AP Precalculus are analyzed using four distinct mathematical representations:

  • Graphical Representation: Visual diagrams plotted on coordinate axes (e.g., curves, lines, piecewise segments, or periodic functions).

  • Analytical Representation: Algebraic equations or formulas defining the rule between variables (e.g., f(x)=ex+1f(x) = e^x + 1).

  • Numerical Representation: Data organized in tables showing input-output pairs (e.g., a table where inputs x=1,2,3,4x = 1, 2, 3, 4 map to outputs y=1,2,4,8y = 1, 2, 4, 8, demonstrating that as inputs increase by 11, outputs double).

  • Verbal Representation: Written or spoken descriptions expressing the relation between variables (e.g., "As the inputs of the function increase by one, the outputs are doubled.").

Graphical Behaviors and Rates of Change

  • Increasing Function: A function ff is increasing on an interval if output values increase as input values increase. Formally: If a<ba < b, then f(a)<f(b)f(a) < f(b). Visually, the graph rises "up from left to right".

  • Decreasing Function: A function ff is decreasing on an interval if output values decrease as input values increase. Formally: If a<ba < b, then f(a)>f(b)f(a) > f(b). Visually, the graph goes "down from left to right".

  • Concave Up: A function graph is concave up on an interval if its rate of change is increasing. Visually, the curve bends upward "like a cup".

  • Concave Down: A function graph is concave down on an interval if its rate of change is decreasing. Visually, the curve bends downward like an upside-down cup.

  • Rate of Change Definition: The phrase "rate of change" simply means slope. Throughout AP Precalculus and AP Calculus, "rate of change" can generally be replaced with "slope" to clarify meaning.

  • Important Vocabulary Distinction ("Words Matter"):

    • Stating "ff is increasing" means output values (yy) are increasing as xx increases.

    • Stating "the rate of change of ff is increasing" means the slope is increasing, which corresponds to the graph being concave up.

    • Stating "ff is decreasing" means output values (yy) are decreasing as xx increases.

    • Stating "the rate of change of ff is decreasing" means the slope is decreasing, which corresponds to the graph being concave down.

  • Interval Notation Rules: When describing features on a graph (such as where a function is increasing, decreasing, positive, negative, or concave up/down), write the intervals using the input (xx) variable.


Graphical behaviors including increasing, decreasing, concave up, and concave down properties

Contextual Analysis: Filling a Vase (Height vs. Time)

  • Scenario Description: An empty vase is filled with water pouring in at a constant volumetric rate until full.

  • Variable Identification:

    • Independent Variable: Time tt, measured in seconds\text{seconds}.

    • Dependent Variable: Height hh of water in the vase, measured in inches\text{inches}.

  • Geometric Behavior Analysis:

    • Narrow parts of the vase fill quickly, causing the water height to rise rapidly (steeper slope / high rate of change).

    • Wider parts of the vase take longer to fill, causing the water height to rise more slowly (flatter slope / lower rate of change).

    • Profile of Vase: The vase is wide near the lower body, narrows slightly in the lower middle, widens again in the upper body, and tapers into a narrow neck at the very top.

  • Analysis of Graph Options:

    • Option (A): Displays a straight line (constant slope). Incorrect because the varying width of the vase means the height rate of change cannot be constant.

    • Option (B): Shows an S-shaped curve leveling off at the top. Incorrect because it fails to capture the rapid filling at the narrow neck.

    • Option (C): Displays a section where height decreases over time. Incorrect because adding water at a constant rate means height must strictly increase (h(t)h(t) cannot decrease).

    • Option (D): Correct graph. Initially rises moderately, flattens out (slows down) where the vase is wide, and then curves upward steeply (rapid rise) as water fills the narrow neck at the top.

Interval Analysis and Function Features (Worked Examples)


Rate of change comparison and piecewise function interval solutions
  • Worked Example: Piecewise Function f(x)f(x) over 0≀x≀90 \le x \le 9

    • Problem Statement: The figure shows the graph of a piecewise function ff defined over 0≀x≀90 \le x \le 9. Identify all intervals where the graph of ff is increasing.

    • Graph Inspection:

    • From x=0x = 0 to x=3x = 3: The graph rises from (0,βˆ’1)(0, -1) to (3,4)(3, 4). Outputs increase.

    • From x=3x = 3 to x=7x = 7: The graph falls from (3,4)(3, 4) to (7,βˆ’1)(7, -1). Outputs decrease.

    • From x=7x = 7 to x=9x = 9: The graph rises from (7,βˆ’1)(7, -1) to (9,3)(9, 3). Outputs increase.

    • Solution Expressions:

    • Set / Interval Notation: (0,3)βˆͺ(7,9)(0, 3) \cup (7, 9)

    • Inequality Notation: 0<x<3Β orΒ 7<x<90 < x < 3 \text{ or } 7 < x < 9

  • Comparative Analysis of Functions f(x)f(x) and g(x)g(x):

    • Function f(x)f(x) Graph:

    • Sign: Positive, because all output values (yy) lie strictly above the xx-axis.

    • Direction: Decreasing, because output values decrease as input values increase (ff goes down moving right).

    • Rate of Change: Increasing, because the graph is concave up (slope changes from steep negative to less negative / flatter).

    • Function g(x)g(x) Graph:

    • Sign: Negative, because all output values (yy) lie strictly below the xx-axis.

    • Direction: Increasing, because output values increase as input values increase (gg goes up moving right).

    • Rate of Change: Decreasing, because the graph is concave down (slope changes from steep positive to less positive / flatter).

Worksheet A: Sinusoidal Functions and Rates of Change


Sinusoidal function graphs for problems 1, 2, and 3
  • Problem 1:

    • Graph Parameters: Sinusoidal graph h(t)h(t) with dashed midline y=9y = 9. Labeled points: F(βˆ’6,11)F(-6, 11), G(βˆ’5,9)G(-5, 9), J(βˆ’4,7)J(-4, 7), K(βˆ’3,9)K(-3, 9), and P(βˆ’2,11)P(-2, 11). The tt-coordinate of GG is t1=βˆ’5t_1 = -5, and the tt-coordinate of JJ is t2=βˆ’4t_2 = -4.

    • Question (i): On the interval (t1,t2)=(βˆ’5,βˆ’4)(t_1, t_2) = (-5, -4), which statement is true about hh?

    • Analysis: As tt goes from βˆ’5-5 to βˆ’4-4, h(t)h(t) decreases from 99 to 77. All outputs on this interval are positive (7<h(t)<97 < h(t) < 9).

    • Answer: Option b (hh is positive and decreasing).

    • Question (ii): Describe how the rate of change of hh is changing on (t1,t2)(t_1, t_2).

    • Analysis: At t1=βˆ’5t_1 = -5, point GG has a negative slope. At trough J(βˆ’4,7)J(-4, 7), the curve levels off to slope 00. Since the slope changes from negative to 00, it is increasing (concave up).

    • Answer: The rate of change of hh is increasing on the interval (t1,t2)(t_1, t_2).

  • Problem 2:

    • Graph Parameters: Sinusoidal graph h(t)h(t) with dashed midline y=βˆ’2.1y = -2.1. Labeled points: F(βˆ’4,0)F(-4, 0), G(βˆ’2,βˆ’2.1)G(-2, -2.1), J(0,βˆ’4.2)J(0, -4.2), K(2,βˆ’2.1)K(2, -2.1), and P(4,0)P(4, 0). The tt-coordinate of KK is t1=2t_1 = 2, and the tt-coordinate of PP is t2=4t_2 = 4.

    • Question (i): On the interval (t1,t2)=(2,4)(t_1, t_2) = (2, 4), which statement is true about hh?

    • Analysis: As tt goes from 22 to 44, h(t)h(t) increases from βˆ’2.1-2.1 to 00. All output values on this open interval are negative (βˆ’2.1<h(t)<0-2.1 < h(t) < 0).

    • Answer: Option c (hh is negative and increasing).

    • Question (ii): Describe how the rate of change of hh is changing on (t1,t2)(t_1, t_2).

    • Analysis: At K(2,βˆ’2.1)K(2, -2.1), the curve has its maximum positive slope. At peak P(4,0)P(4, 0), the slope levels off to 00. Since the slope changes from positive toward 00, the rate of change is decreasing (concave down).

    • Answer: The rate of change of hh is decreasing on the interval (t1,t2)(t_1, t_2).

  • Problem 3:

    • Graph Parameters: Sinusoidal graph h(t)h(t) with dashed midline y=1y = 1. Labeled points: F(0,6)F(0, 6), G(0.5,1)G(0.5, 1), J(1,βˆ’4)J(1, -4), K(1.5,1)K(1.5, 1), and P(2,6)P(2, 6). The tt-coordinate of FF is t1=0t_1 = 0, and the tt-coordinate of GG is t2=0.5t_2 = 0.5.

    • Question (i): On the interval (t1,t2)=(0,0.5)(t_1, t_2) = (0, 0.5), which statement is true about hh?

    • Analysis: As tt goes from 00 to 0.50.5, h(t)h(t) decreases from 66 to 11. All output values are positive (1<h(t)<61 < h(t) < 6).

    • Answer: Option b (hh is positive and decreasing).

    • Question (ii): Describe how the rate of change of hh is changing on (t1,t2)(t_1, t_2).

    • Analysis: At peak F(0,6)F(0, 6), the slope is 00. Moving toward G(0.5,1)G(0.5, 1), the slope becomes increasingly negative. Since the slope changes from 00 to negative numbers, the rate of change is decreasing (concave down).

    • Answer: The rate of change of hh is decreasing on the interval (t1,t2)(t_1, t_2).

Worksheet A: Polynomial / Continuous Function Analysis


Sinusoidal graph problem 4 and polynomial graph of f for problems 5 to 8
  • Problem 4:

    • Graph Parameters: Sinusoidal graph h(t)h(t) with dashed midline y=βˆ’5y = -5. Labeled points: F(6,βˆ’2)F(6, -2), G(8,βˆ’5)G(8, -5), J(10,βˆ’8)J(10, -8), K(12,βˆ’5)K(12, -5), and P(14,βˆ’2)P(14, -2). The tt-coordinate of JJ is t1=10t_1 = 10, and the tt-coordinate of KK is t2=12t_2 = 12.

    • Question (i): On the interval (t1,t2)=(10,12)(t_1, t_2) = (10, 12), which statement is true about hh?

    • Analysis: As tt goes from 1010 to 1212, h(t)h(t) increases from βˆ’8-8 to βˆ’5-5. All outputs are negative (βˆ’8<h(t)<βˆ’5-8 < h(t) < -5).

    • Answer: Option c (hh is negative and increasing).

    • Question (ii): Describe how the rate of change of hh is changing on (t1,t2)(t_1, t_2).

    • Analysis: At trough J(10,βˆ’8)J(10, -8), the slope is 00. Moving toward K(12,βˆ’5)K(12, -5), the slope becomes increasingly positive. Since slope changes from 00 to positive numbers, the rate of change is increasing (concave up).

    • Answer: The rate of change of hh is increasing on the interval (t1,t2)(t_1, t_2).

  • Problems 5–8: Analysis of Graph of f(x)f(x) over 0≀x≀90 \le x \le 9

    • Labeled Points on Graph: Point AA (in decreasing section before minimum), Point BB (local minimum / trough), Point CC (xx-intercept going upward), Point DD (local maximum / peak), Point EE (in decreasing section after peak), Point FF (in rising section at end).

    • Problem 5: On which of the following intervals is ff negative and increasing?

    • Options: (A) interval from A to B, (B) interval from B to C, (C) interval from C to D, (D) interval from E to F.

    • Analysis: From B to C, the graph is below the xx-axis (y<0y < 0) and rising from minimum B to xx-intercept C.

    • Answer: (B) the interval from B to C.

    • Problem 6: Which of the following statements about the rate of change of ff is true?

    • Options:

      • (A) The rate of change of ff is negative on the interval from B to C.

      • (B) The rate of change of ff is negative on the interval from C to D.

      • (C) The rate of change of ff is negative on the interval from D to E.

      • (D) The rate of change of ff is negative on the interval from E to F.

    • Analysis: A negative rate of change means the function is decreasing (slope <0< 0). From peak D to point E, the graph is falling.

    • Answer: (C) The rate of change of ff is negative on the interval from D to E.

    • Problem 7: Which of the following statements about the rate of change of ff is true?

    • Options:

      • (A) The rate of change of ff is decreasing on the interval from A to B.

      • (B) The rate of change of ff is decreasing on the interval from B to C.

      • (C) The rate of change of ff is increasing on the interval from C to D.

      • (D) The rate of change of ff is increasing on the interval from E to F.

    • Analysis: An increasing rate of change corresponds to concave up behavior (slope becoming more positive / less negative). From E to F, the graph bends upward like a cup.

    • Answer: (D) The rate of change of ff is increasing on the interval from E to F.

    • Problem 8: On which of the following intervals is ff decreasing and the graph of ff concave up?

    • Options: (A) interval from A to B, (B) interval from B to C, (C) interval from C to D, (D) interval from E to F.

    • Analysis: From point A to local minimum B, the graph is falling (ff decreasing) and curving upward towards the trough (concave up).

    • Answer: (A) the interval from A to B.