33 - Storage Devices - 3.4

Memory and Data Storage Overview

  • Volatile Memory

    • Definition: Memory that loses its contents when power is turned off.

    • Implication: Requires non-volatile devices to retain data after power loss.

Types of Non-Volatile Storage Devices

  1. Hard Drive

    • Description: A magnetic storage device with rapidly spinning platters.

    • Storage Method: Random access - data can be stored and retrieved from anywhere on the drive based on its address.

    • Internal Components:

      • Platters: Spinning disks where data is stored.

      • Spins thousands of times per minute.

      • Actuator Arm: Moves the read/write head to the required location.

      • Read/Write Head: Reads and writes information to platters.

    • Rotational Speeds:

      • Common speeds include 5,400 RPM, 7,200 RPM, 10,000 RPM, and 15,000 RPM.

    • Performance Correlation:

      • Faster speeds result in lower latency, enhancing read/write speeds.

    • Drive Sizes:

      • 3.5 inch drives for desktops.

      • 2.5 inch drives for laptops and mobile devices.

  2. Solid State Drives (SSDs)

    • Description: Non-volatile drive with no mechanical moving parts, using flash memory.

    • Performance: Significantly faster read/write speeds compared to traditional hard drives.

    • Internal Components: Primarily memory modules, with no moving parts visible when the top is removed.

    • Connectivity:

      • Connection to the PCI Express (PCIe) bus for enhanced throughput.

  3. Connector Types and Interfaces

    • SATA:

      • Standard connection providing up to 6 gigabits per second.

    • NVMe (Non Volatile Memory Express):

      • New protocol for higher speeds, connecting directly to PCI Express bus, offering low latency and high throughput up to 20 gigabits per second.

    • Serial Attached SCSI (SAS):

      • Offers serialized SCSI technology, achieving speeds around 22.5 gigabits per second.

      • Commonly used in large storage arrays to manage multiple drives efficiently.

    • mSATA and M.2:

      • mSATA: Mini SATA for smaller form factor connections.

      • M.2: Modern interface for SSDs that plugs directly into the motherboard with no required cables.

      • Supports both NVMe and SATA protocols using different keys (B key, M key).

  4. Flash Drives

    • Description: Small, portable storage devices using EEPROM technology.

    • Non-volatile, retains information without continuous power.

    • Limitations:

      • Limited number of writes; can read but not write new data once the limit is reached.

    • Types of Flash Storage:

      • Compact Flash (CF), Secure Digital (SD), Mini SD, Micro SD, XD Picture Card.

  5. Optical Drives

    • Description: Use lasers to read and write microscopic bumps on discs (CD-ROM, DVD-ROM, Blu-ray).

    • Primary Use: Historically for archiving data; slower compared to HDDs and SSDs.

    • Retrieval: External optical drives available for reading legacy formats via USB connections.

Conclusion

  • As storage technology evolves, understanding the mechanisms, interfaces, and limitations of each type of storage device is crucial for effective data management and decision-making in technology usage.