Alkanes: Physical Properties, Chemical Reactivity, Cracking, and Reaction Mechanisms

Structure and Physical Properties of Alkanes

  • Definition and Formulae:

    • Alkanes are the simplest family of hydrocarbons, defined as organic compounds containing carbon and hydrogen atoms only.

    • Their chemical structure contains exclusively carbon-hydrogen (C−HC-H) bonds and single carbon-carbon (C−CC-C) bonds.

  • Boiling Points of Straight-Chain Alkanes:

    • The first four straight-chain alkanes—methane (CH4CH_4), ethane (C2H6C_2H_6), propane (C3H8C_3H_8), and butane (C4H10C_4H_{10})—are gases at room temperature.

    • Solid alkanes begin to appear around C17H36C_{17}H_{36}. A precise threshold cannot be stated because each structural isomer possesses a distinct melting and boiling point, and at 1717 carbon atoms, an exceptionally large number of structural isomers exist.

    • Cycloalkanes exhibit boiling points approximately 10–20 K10\text{--}20\,K higher than their corresponding straight-chain counterparts.

Boiling Points of the Alkanes Chart
  • Molecular Polarity and Intermolecular Forces:

    • Very little electronegativity difference exists between carbon and hydrogen atoms, resulting in negligible bond polarity.

    • Fully symmetrical alkane molecules, such as methane (CH4CH_4), are completely non-polar.

    • The intermolecular forces between alkane molecules consist entirely of Van der Waals dispersion forces.

    • Van der Waals forces are very small for small molecules like methane, but increase as molecular size and electron count increase, causing boiling points to rise alongside molecular weight.

  • Effect of Isomerism and Branching on Boiling Points:

    • For structural isomers, an increase in chain branching leads to lower boiling points.

    • Van der Waals dispersion forces are smaller for shorter molecular structures and act only over extremely short distances between neighboring molecules.

    • Highly branched, compact ("short and fat") molecules cannot lie as close together as extended, linear ("long and thin") molecules, reducing contact area and weakening intermolecular attraction.

    • Boiling point values for the three structural isomers of pentane (C5H12C_5H_{12}):

    • Pentane (straight-chain): 309.2 K309.2\,K

    • 2-Methylbutane (singly branched): 301.0 K301.0\,K

    • 2,2-Dimethylpropane (doubly branched): 282.6 K282.6\,K

    • Cycloalkanes have slightly higher boiling points because their rigid ring structures make them tidier, allowing molecules to pack closer together.

  • Solubility Characteristics:

    • Both open-chain alkanes and cycloalkanes are virtually insoluble in water.

    • Alkanes readily dissolve in organic solvents. Liquid alkanes serve as effective solvents for many other covalent compounds.

    • Thermodynamic Explanation for Water Insolubility:

    • Dissolving a molecular substance in water requires breaking the intermolecular forces within the solute (Van der Waals dispersion forces in alkanes) and breaking the intermolecular forces in water (hydrogen bonds).

    • While breaking the Van der Waals dispersion forces in small alkanes requires negligible energy, breaking hydrogen bonds in water requires significant energy input.

    • The new attractive interactions established between alkane and water molecules are limited to weak Van der Waals forces.

    • Energy released from forming these weak alkane-water Van der Waals interactions is insufficient to compensate for the energy needed to disrupt hydrogen bonds in water.

    • Thermodynamic Explanation for Organic Solvent Solubility:

    • In most organic solvents, primary intermolecular attractions consist of Van der Waals forces (dispersion forces or dipole-dipole interactions).

    • Dissolution involves disrupting existing Van der Waals forces and replacing them with new Van der Waals forces between solute and solvent.

    • Energetically, breaking and forming these similar Van der Waals interactions cancel each other out, presenting no significant energy barrier to solubility.

Chemical Reactivity of Alkanes and Cycloalkanes

  • Reactivity Characteristics of Alkanes:

    • Alkanes contain strong single carbon-carbon bonds (C−CC-C) and strong carbon-hydrogen bonds (C−HC-H).

    • Because C−HC-H bonds are only very slightly polar, alkane molecules lack regions carrying significant partial positive (δ+\delta+) or negative (δ−\delta-) charge to attract polar species or ions.

    • While many organic reactions are initiated by the attraction of an ion or polar molecule to a charged site, alkanes lack charge separation and exhibit a restricted set of reactions:

    1. Combustion (destroying the complete molecule).

    2. Halogenation (breaking carbon-hydrogen bonds).

    3. Cracking (breaking carbon-carbon bonds).

  • Reactivity Characteristics of Cycloalkanes:

    • Cycloalkanes display chemical reactivity generally identical to open-chain alkanes, with the exception of very small ring systems such as cyclopropane.

Combustion Reactions of Alkanes and Cycloalkanes

  • Complete Combustion:

    • Provided sufficient oxygen (O2O_2) is available, complete combustion produces carbon dioxide (CO2CO_2) and water (H2OH_2O).

    • Chemical equations for complete combustion:

    • Propane: C3H8+5O2→3CO2+4H2OC_3H_8 + 5O_2 \rightarrow 3CO_2 + 4H_2O

    • Butane (fractional oxygen coefficient): C4H10+612O2→4CO2+5H2OC_4H_{10} + 6\frac{1}{2}O_2 \rightarrow 4CO_2 + 5H_2O

    • Butane (integer coefficients): 2C4H10+13O2→8CO2+10H2O2C_4H_{10} + 13O_2 \rightarrow 8CO_2 + 10H_2O

Combustion equations for propane and butane
  • Ignition Trends and Flame Appearance:

    • Hydrocarbons become progressively harder to ignite as molecular size increases.

    • Ignition requires efficient gas-phase mixing between hydrocarbon vapor and oxygen; less volatile liquids react only at the liquid surface.

    • Larger hydrocarbon molecules possess greater Van der Waals forces, making it more difficult for molecules to vaporize.

    • Under complete combustion conditions, all hydrocarbons burn with a clean blue flame.

    • As the number of carbon atoms in the hydrocarbon increases, complete combustion becomes harder to achieve, making larger hydrocarbons more likely to burn with a yellow, smoky flame.

  • Incomplete Combustion:

    • Occurs when oxygen supply is restricted or insufficient.

    • Results in the formation of unburnt carbon (CC, soot) or toxic carbon monoxide (COCO).

Halogenation Reactions of Alkanes and Cycloalkanes

  • Reactivity Trends Across Halogens:

    • Fluorine (F2F_2): Reacts explosively even in the cold and dark, producing carbon and hydrogen fluoride (HFHF).

    • Iodine (I2I_2): Does not react with alkanes to any measurable extent under normal laboratory conditions.

    • Chlorine (Cl2Cl_2) and Bromine (Br2Br_2):

    • No reaction occurs in total darkness.

    • In the presence of a open flame, reactions are vigorous to explosive (similar to fluorine), yielding carbon and the corresponding hydrogen halide (HClHCl or HBrHBr). Reactivity decreases sequentially from fluorine to chlorine to bromine.

    • Under ultraviolet (UV) light or sunlight, photochemical substitution reactions take place at room temperature.

  • Halogenation of Methane with Chlorine:

    • Stepwise substitution reactions occur in which hydrogen atoms in methane are replaced one by one by chlorine atoms, producing a mixture of products:

    • Step 1: CH4+Cl2→CH3Cl+HClCH_4 + Cl_2 \rightarrow CH_3Cl + HCl (Chloromethane)

    • Step 2: CH3Cl+Cl2→CH2Cl2+HClCH_3Cl + Cl_2 \rightarrow CH_2Cl_2 + HCl (Dichloromethane)

    • Step 3: CH2Cl2+Cl2→CHCl3+HClCH_2Cl_2 + Cl_2 \rightarrow CHCl_3 + HCl (Trichloromethane)

    • Step 4: CHCl3+Cl2→CCl4+HClCHCl_3 + Cl_2 \rightarrow CCl_4 + HCl (Tetrachloromethane)

Stepwise substitution reactions of methane with chlorine
  • Physical States and Visual Observations:

    • Chloromethane (CH3ClCH_3Cl) is a gas at room temperature; dichloromethane (CH2Cl2CH_2Cl_2), trichloromethane (CHCl3CHCl_3), and tetrachloromethane (CCl4CCl_4) are liquids at room temperature.

    • Mixing colourless methane (CH4CH_4) gas and green chlorine (Cl2Cl_2) gas yields steamy fumes of hydrogen chloride (HClHCl) gas and a fine mist of condensed organic liquids.

    • Reactions with bromine proceed identically (using red-brown bromine vapor or bubbling methane through liquid bromine exposed to UV light).

    • Monosubstitution Isomerism in Higher Alkanes:

  • Halogenation of larger alkanes yields mixtures of substitution products.

  • When monosubstitution occurs on propane (CH3−CH2−CH3CH_3-CH_2-CH_3), two distinct structural isomers can form:

    • Substitution at an end carbon yields 1-chloropropane (CH3−CH2−CH2−ClCH_3-CH_2-CH_2-Cl).

    • Substitution at the central carbon yields 2-chloropropane (CH3−CH(Cl)−CH3CH_3-CH(Cl)-CH_3).

Monosubstitution isomers of propane
  • Ring Strain and Reactivity of Cyclopropane:

    • In the presence of UV light, cyclopropane undergoes substitution reactions with chlorine or bromine identically to acyclic alkanes.

    • In the dark (absence of UV light), cyclopropane undergoes addition reactions involving ring opening.

    • Reaction example: Cyclopropane reacts with bromine in the dark to produce 1,3-dibromopropane (Br−CH2−CH2−CH2−BrBr-CH_2-CH_2-CH_2-Br).

    • Under light exposure, cyclopropane undergoes both addition and substitution reactions simultaneously.

    • Explanation of Ring Cleavage: Cyclopropane suffers from severe ring strain. Internal bond angles within the three-membered ring are forced to 60∘60^\circ, deviating significantly from the normal tetrahedral angle of 109.5∘109.5^\circ required for stable single-bonded carbon atoms.

Industrial Cracking of Alkanes

  • Definition and Purpose:

    • Cracking is the process of breaking down large hydrocarbon molecules into smaller, more valuable fragments.

    • Feedstock Sources: Heavy petroleum fractions obtained from fractional distillation of crude oil, specifically the naphtha fraction and gas oil fraction. These fractions are collected as liquids and re-vaporized prior to cracking.

  • Process Conditions and Products:

    • Hydrocarbon chains break up in a random manner, producing mixtures of smaller alkanes and alkenes containing carbon-carbon double bonds (C=CC=C).

    • High pressures and high temperatures can be used without a catalyst, or lower temperatures and pressures in the presence of a catalyst.

    • Representative cracking equation for pentadecane (C15H32C_{15}H_{32}):

    • Equation: C15H32→2C2H4+C3H6+C8H18C_{15}H_{32} \rightarrow 2C_2H_4 + C_3H_6 + C_8H_{18}

    • Product Utility: Ethene (C2H4C_2H_4) and propene (C3H6C_3H_6) are important chemical feedstocks for plastics manufacturing and organic synthesis; octane (C8H18C_8H_{18}) is a key petrol (gasoline) component.

Structural diagram of cracking an alkane into smaller alkenes and alkanes
  • Catalytic Cracking Specifics:

    • Catalyst: Zeolites (complex aluminosilicates formed of large 3D lattices of aluminium, silicon, and oxygen carrying a negative charge).

    • Operating Parameters: Hydrocarbon vapor is brought into contact with the zeolite catalyst at a temperature of approximately 500 ∘C500\,^\circ\text{C} and moderately low pressure.

Mechanism of Free Radical Substitution

  • Photochemical Reaction Principle:

    • Ultraviolet (UV) light provides energy to cleave covalent bonds in halogen molecules.

    • UV photon energy corresponds to the bond energy required to breakn the bond in a chlorine molecule homolytically.

    • Homolytic Fission: Symmetrical splitting of a covalent bond where each atom retains one of the two shared electrons.

    • Free Radical: An atom or group of atoms containing an unpaired valence electron, denoted with a dot (⋅\cdot).

    • Complete mechanism classification: Free radical substitution or free radical chain reaction.

UV light splitting a chlorine molecule into chlorine free radicals
  • Step-by-Step Reaction Steps for Methane Halogenation:

    • 1. Chain Initiation Step:

    • UV light breaks a chlorine molecule homolytically into two neutral chlorine free radicals:

      • Equation: Cl2→UV2Cl∙Cl_2 \xrightarrow{UV} 2Cl^\bullet

    • 2. Chain Propagation Steps:

    • Self-sustaining chain-maintaining reactions where radicals react with molecules to form new radicals:

      • Step 2a: Chlorine radical abstracts a hydrogen atom from methane, forming hydrogen chloride and a methyl radical:

      • Equation: CH4+Cl∙→CH3∙+HClCH_4 + Cl^\bullet \rightarrow CH_3^\bullet + HCl

      • Step 2b: Methyl radical reacts with a chlorine molecule, forming chloromethane and regenerating a chlorine radical:

      • Equation: CH3∙+Cl2→CH3Cl+Cl∙CH_3^\bullet + Cl_2 \rightarrow CH_3Cl + Cl^\bullet

    • 3. Chain Termination Steps:

    • Reactions that remove free radicals from the system without producing new radicals by combining two radical species:

      • Combination of two chlorine radicals:

      • Equation: 2Cl∙→Cl22Cl^\bullet \rightarrow Cl_2

      • Combination of a methyl radical and a chlorine radical:

      • Equation: CH3∙+Cl∙→CH3ClCH_3^\bullet + Cl^\bullet \rightarrow CH_3Cl

      • Combination of two methyl radicals (forming ethane as a minor product):

      • Equation: CH3∙+CH3∙→CH3CH3CH_3^\bullet + CH_3^\bullet \rightarrow CH_3CH_3