Comprehensive Study Notes on Work, Energy, Energy, and Power

Concept and Definition of Work

  • In physics, work specifically describes a situation where a force acts upon a body and causes it to undergo a displacement. If no displacement occurs, the scientific work done is zero regardless of the effort applied.
  • Essential Factors for Work:
    • The magnitude of the force (FF) applied to the object.
    • The displacement (SS) of the object in the direction of the force.
  • General Measurement: The work done by a force is the product of the force's magnitude and the displacement of its point of application in the direction of the force.
  • Equation:
    • When the force is in the direction of displacement: W=F×SW = F \times S.
    • When the force acts at an angle θ\theta to the displacement: W=F×S×cos⁡(θ)W = F \times S \times \cos(\theta).
  • Scalar Nature: Work is a scalar quantity, as it is the dot product of two vector quantities (force and displacement): W=F⋅SW = \mathbf{F} \cdot \mathbf{S}.

Mathematical Expressions for Work

  • Component of Displacement: If a body is displaced along a surface AC=S\text{AC} = S at an angle θ\theta to the force FF, the component of displacement in the direction of the force is S×cos⁡(θ)S \times \cos(\theta). Thus, W=F×(S×cos⁡(θ))W = F \times (S \times \cos(\theta)).
  • Component of Force: Conversely, if the force FF acts at an angle θ\theta to the displacement SS, the component of force in the direction of displacement is F×cos⁡(θ)F \times \cos(\theta). Thus, W=(F×cos⁡(θ))×SW = (F \times \cos(\theta)) \times S.
  • Variable Force Calculation: When force varies during displacement, work is calculated by finding the area under a Force-Displacement (F−SF-S) graph.
    • For a force increasing linearly with displacement, the work is the area of a triangle: W=12×F×SW = \frac{1}{2} \times F \times S.
    • For a constant force, the work is the area of a rectangle: W=F×SW = F \times S.

Special Cases of Work Done

  • Positive Work (θ=0∘\theta = 0^{\circ}): Occurs when displacement is in the same direction as the force (cos⁡(0∘)=1\cos(0^{\circ}) = 1).
    • Example: A body of mass mm falling freely under gravity (F=mgF = mg) through height hh; W=mghW = mgh.
    • Example: A coolie lifting a load upwards; the force applied and displacement are both upward.
  • Zero Work (θ=90∘\theta = 90^{\circ}): Occurs when displacement is perpendicular to the force (cos⁡(90∘)=0\cos(90^{\circ}) = 0).
    • Example: A person carrying a load on their head while walking horizontally; gravity acts downwards while displacement is horizontal.
    • Example: Centripetal force in circular motion; the force is directed toward the center while displacement at any instant is tangential.
  • Negative Work (θ=180∘\theta = 180^{\circ}): Occurs when displacement is opposite to the direction of the force (cos⁡(180∘)=−1\cos(180^{\circ}) = -1).
    • Example: The force of friction acting on a moving object.
    • Example: Gravity acting on a ball thrown vertically upwards; gravity is downward while displacement is upward (W=−mghW = -mgh).

Units of Work and Energy

  • S.I. Unit: The joule (JJ).
    • Definition: One joule of work is done when a force of 1 newton1\,\text{newton} (NN) displaces a body by 1 metre1\,\text{metre} (mm) in the direction of the force.
    • Bigger Units: 1 kJ=103 J1\,kJ = 10^3\,J, 1 MJ=106 J1\,MJ = 10^6\,J, 1 GJ=109 J1\,GJ = 10^9\,J.
  • C.G.S. Unit: The erg.
    • Definition: One erg of work is done when a force of 1 dyne1\,\text{dyne} displaces a body by 1 cm1\,cm in the direction of the force.
  • Relationship: 1 J=105 dyne×102 cm=107 erg1\,J = 10^5\,\text{dyne} \times 10^2\,\text{cm} = 10^7\,\text{erg}.
  • Calorie: Used for heat energy. 1 calorie1\,\text{calorie} is the heat required to raise 1 g1\,g of water from 14.5∘C14.5^{\circ}C to 15.5∘C15.5^{\circ}C.
    • 1 calorie=4.18 J1\,\text{calorie} = 4.18\,J.
  • Electron Volt (eVeV): Used for atomic particles. It is the energy gained by an electron accelerated through a potential difference of 1 volt1\,\text{volt}.
    • 1 eV=1.6×10−19 J1\,eV = 1.6 \times 10^{-19}\,J.
  • Commercial Units:
    • Watt hour (WhWh): 1 Wh=3600 J=3.6 kJ1\,Wh = 3600\,J = 3.6\,kJ.
    • Kilowatt hour (kWhkWh): 1 kWh=3.6×106 J=3.6 MJ1\,kWh = 3.6 \times 10^6\,J = 3.6\,MJ.

Power: Measurements and Units

  • Definition: Power is the rate at which work is done or energy is transferred. It is a scalar quantity.
  • Formula: P=WtP = \frac{W}{t}.
  • Factors: Power depends on the total work done and the time taken. If a task is performed in less time, more power is spent.
  • Relation to Speed: If a constant force FF moves a body with average speed vv, then P=F×vP = F \times v.
  • S.I. Unit: The watt (WW). 1 W=1 J/s1\,W = 1\,J/s.
  • Engineering Unit: Horse Power (H.P.H.P.).
    • 1 H.P.=746 W=0.746 kW1\,H.P. = 746\,W = 0.746\,kW.
  • Comparison Table:
    • Work: Product of force and displacement; independent of time; unit is joule.
    • Power: Rate of work; depends on time; unit is watt.

Mechanical Energy: Potential and Kinetic

  • Mechanical Energy: The sum of potential and kinetic energy possessed by a body due to its rest or motion.
  • Potential Energy (UU): Energy due to position, size, or shape.
    • Gravitational Potential Energy: U=mghU = mgh. It is considered zero at an infinite distance or, for practical calculations, zero at the earth's surface. Gain in P.E. is mg(h2−h1)mg(h_2 - h_1).
    • Elastic Potential Energy: Energy stored in deformed bodies like a compressed spring or bent bow.
  • Kinetic Energy (KK): Energy due to motion.
    • Equation: K=12mv2K = \frac{1}{2}mv^2.
    • Relation to Momentum (p=mvp = mv): K=p22mK = \frac{p^2}{2m} or p=2mKp = \sqrt{2mK}.
    • Work-Energy Theorem: The work done by a force on a moving body equals the increase in its kinetic energy (W=Kf−Ki=12m(v2−u2)W = K_f - K_i = \frac{1}{2}m(v^2 - u^2)).
  • Forms of Kinetic Energy:
    • Translational: Motion in a straight line (e.g., a falling body).
    • Rotational: Rotation about an axis (e.g., a spinning top).
    • Vibrational: To-and-fro motion (e.g., a clamped vibrating wire).

Different Forms of Energy and Conversions

  • Solar Energy: Radiated from the sun; utilized via solar panels (heat), solar furnaces (steam for turbines), and solar cells (direct electricity).
  • Heat Energy: Energy from burning fuels or steam; used in steam engines to do mechanical work.
  • Chemical Energy: Stored in fossil fuels, food, and batteries. Released through burning or chemical reactions.
  • Hydro Energy: Kinetic energy of flowing water used to drive turbines in hydroelectric plants.
  • Electrical Energy: Produced by moving charges (electrons or ions).
  • Nuclear Energy: Energy from nuclear fission or fusion, based on E=mc2E = mc^2.
  • Sound Energy: Produced by vibrating bodies and sensed by the ear.
  • Magnetic Energy: Energy used by magnets to attract materials like iron.
  • Energy Conversions:
    • Dynamo: Mechanical to electrical.
    • Motor: Electrical to mechanical.
    • Thermocouple: Heat to electrical.
    • Microphone: Sound to electrical.
    • Loudspeaker: Electrical to sound.
    • Photosynthesis: Light to chemical.
  • Degradation of Energy: During transformation, some energy is always converted into undesirable forms (usually heat due to friction) and dissipated to the surroundings. This non-useful part is called degraded energy.

Principle of Conservation of Energy

  • Principle: Energy can neither be created nor destroyed; it can only transition from one form to another. The total energy in a closed system remains constant.
  • Theoretical Verification for Free Fall: For a body of mass mm falling from height hh:
    • At Top (A): Velocity = 0, K=0K = 0, U=mghU = mgh, Total Energy = mghmgh.
    • During Fall (B): After falling distance xx, v2=2gxv^2 = 2gx. K=mgxK = mgx, U=mg(h−x)U = mg(h-x), Total Energy = mgx+mgh−mgx=mghmgx + mgh - mgx = mgh.
    • At Bottom (C): v2=2ghv^2 = 2gh, K=mghK = mgh, U=0U = 0, Total Energy = mghmgh.
  • Simple Pendulum Application:
    • At extreme positions, the bob has maximum P.E. (mghmgh) and zero K.E.
    • At the mean position, the bob has maximum K.E. (12mv2\frac{1}{2}mv^2) and minimum (zero) P.E.
    • Potential energy at height hh converts to kinetic energy at the mean position (v=2ghv = \sqrt{2gh}).

Practical Examples and Numericals

  • Example 1: A crane lifting a 500 kg500\,kg car to 4 m4\,m:
    • Force F=500×9.8=4900 NF = 500 \times 9.8 = 4900\,N.
    • Work done W=4900×4=19600 JW = 4900 \times 4 = 19600\,J.
  • Example 2: A 40 kg40\,kg boy climbs 3030 steps, each 20 cm20\,cm high (h=6 mh = 6\,m), in 2 min2\,min (120 s120\,s):
    • Work W=mgh=40×10×6=2400 JW = mgh = 40 \times 10 \times 6 = 2400\,J.
    • Power P=2400120=20 WP = \frac{2400}{120} = 20\,W.
  • Example 3: A force of 15 N15\,N pulls a 2 kg2\,kg body 5 m5\,m along a 30∘30^{\circ} incline:
    • Initial Work W=15×5=75 JW = 15 \times 5 = 75\,J.
    • Work against gravity W′=mgh=2×9.8×(5×sin⁡(30∘))=49 JW' = mgh = 2 \times 9.8 \times (5 \times \sin(30^{\circ})) = 49\,J.
    • The difference (75 J−49 J=26 J75\,J - 49\,J = 26\,J) is work done against friction.
  • Example 4: An engine lifts 105 kg10^5\,kg coal from a 360 m360\,m mine in 1 hour1\,hour (3600 s3600\,s):
    • Power P=105×10×3603600=105 W=100 kWP = \frac{10^5 \times 10 \times 360}{3600} = 10^5\,W = 100\,kW.
  • Natasha Fitness Example: Weights of 10 kg10\,kg, lifted 0.5 m0.5\,m, 100100 times.
    • Work done W=100×(10×9.8×0.5)=49000 JW = 100 \times (10 \times 9.8 \times 0.5) = 49000\,J.

Would you like the summary of the next chapter?