Source: Condensed from the Section 7 Study Guide (zyBooks 7.1–7.4). Not official WGU material.
Big idea. A power series ∑cn(x−a)n is an "infinite polynomial": inside its interval of convergence it is a real function you can add, multiply, differentiate, and integrate term by term. 7.1 asks where it converges (ratio test plus endpoints); 7.2 builds new series from 1−x1; 7.3 gives the Taylor formula cn=n!f(n)(a) and the error bound; 7.4 adds the binomial series, the table of known series, and series solutions of differential equations and integrals.
7.1 Power Series and Functions
Big idea
Power series centered at a: ∑n=0∞cn(x−a)n=c0+c1(x−a)+c2(x−a)2+⋯ (convention: (x−a)0=1 even at x=a).
It always converges at its center x=a (the value is c0).
Exactly one happens: (i) converges only at x=a (R=0); (ii) converges for all x (R=∞); (iii) some R>0 with convergence for ∣x−a∣<R and divergence for ∣x−a∣>R.
Interval of convergence = every x where it converges; radius R = half its length. At the endpoints x=a±R anything can happen: test each separately.
Formulas
Recipe for the interval: (1) ratio test ρ=limn→∞anan+1 with the x's still in it; (2) solve ρ<1 for x (if ρ=0 for all x, R=∞; if ρ=∞ for all x=a, R=0); (3) plug each endpoint into the series and test it (harmonic, alternating series test, p-series, divergence test).
Geometric series as a function: 1−x1=∑n=0∞xn=1+x+x2+⋯ for ∣x∣<1.
More generally 1−ra=∑arn for ∣r∣<1: rewrite your function so it looks like this.
Worked example (finite radius): ∑n=1∞n2n(x−3)n.
Ratio test: ρ=limn+1n⋅2∣x−3∣=2∣x−3∣<1⟺1<x<5, so R=2.
Also: ∑n!xn has ρ=limn+1∣x∣=0, so R=∞; ∑n!xn has ρ=lim(n+1)∣x∣=∞ for x=0, so R=0.
Geometric representation: 5+xx=5x⋅1−(−x/5)1=∑n=0∞5n+1(−1)nxn+1, needs ∣x∣<5; interval (−5,5) (geometric series never converge at ∣r∣=1).
Common mistakes
Forgetting to check the endpoints. The ratio test says nothing when ρ=1.
Writing the radius as the whole interval length. R is half the length.
For a geometric-type series, "testing" the endpoints anyway: at ∣r∣=1 a geometric series always diverges.
7.2 Properties of Power Series
Big idea
If ∑cnxn=f(x) and ∑dnxn=g(x) on a common interval I: (i) ∑(cn±dn)xn=f±g on I; (ii) ∑bxmcnxn=bxmf(x) on I; (iii) ∑cn(bxm)n=f(bxm) whenever bxm∈I. Different intervals: the result is good on the smaller (common) one.
Multiplying (Cauchy product): en=c0dn+c1dn−1+⋯+cnd0, converging to f⋅g on the common interval.
Term-by-term calculus: if f=∑cn(x−a)n for ∣x−a∣<R, then f′=∑ncn(x−a)n−1 and ∫fdx=C+∑cnn+1(x−a)n+1, same R, but endpoint behavior can change.
Uniqueness: if two power series are equal on an open interval around a, their coefficients are equal.
Formulas
(1−x)21=∑n=0∞(n+1)xn for ∣x∣<1
ln(1+x)=∑n=1∞(−1)n+1nxn on (−1,1]
tan−1x=∑n=0∞(−1)n2n+1x2n+1 on [−1,1]
Present value (annual payment C, interest rate r), n years: P=1+rC+(1+r)2C+⋯+(1+r)nC=rC(1−(1+r)n1)
Present value forever: P=rC
Worked example (partial fractions, then two geometric series): f(x)=(x−2)(x−4)1=x−41/2−x−21/2=1−x/21/4−1−x/41/8.
So f(x)=∑n=0∞(2n+21−2⋅4n+11)xn; the pieces need ∣x∣<2 and ∣x∣<4, keep the smaller: interval (−2,2). Check: n=0 gives 81=f(0).
New interval from an old one: if ∑anxn works on (−1,1), then ∑an(2x)n needs 2x∈(−1,1), so (−21,21).
Differentiate to sum: (1−x)21=∑(n+1)xn, so at x=31, ∑n=0∞3nn+1=(1−1/3)21=49.
Integrate 1+x1=1−x+x2−⋯ to get ln(1+x)=C+x−2x2+3x3−⋯; x=0 gives C=0. Endpoints: x=1 converges (alternating harmonic), x=−1 diverges: interval (−1,1].
Present value: 2 million dollars per year for 10 years at r=4%: P=0.042(1−1.04−10)≈16.222 million; forever, P=0.042=50 million.
Common mistakes
Assuming the differentiated or integrated series has the same interval. Same radius, yes; endpoints must be re-checked.
Forgetting the +C when integrating, then not solving for it with x=a.
Starting the derivative series at n=0: the constant term dies, so it starts at n=1.
7.3 Taylor and Maclaurin Series
Big idea
If f has a power series at a, its coefficients must be cn=n!f(n)(a) (uniqueness).
Taylor series at a: ∑n=0∞n!f(n)(a)(x−a)n. Maclaurin series: the Taylor series at a=0.
Taylor polynomial pn = the nth partial sum (stop at (x−a)n). It approximates f near a.
Remainder Rn(x)=f(x)−pn(x). The series converges to f exactly when Rn(x)→0.
Worked example (Taylor polynomial, estimate, error bound): f(x)=x at a=4.
f(4)=2, f′(4)=41, f′′(4)=−321, so p2(x)=2+41(x−4)−641(x−4)2 and 4.2≈p2(4.2)=2.049375.
Bound: f′′′(x)=83x−5/2 is largest on [4,4.2] at x=4, so M=2563 and ∣R2∣≤3!3/256(0.2)3=1.5625×10−5.
Taylor series with interval: f(x)=x1 at a=2 has f(n)(x)=(−1)nn!x−(n+1), so cn=2n+1(−1)n and x1=∑n=0∞2n+1(−1)n(x−2)n; ratio test gives 0<x<4, and at both endpoints the terms have size 21 (diverge): interval (0,4).
How many terms: to get e0.5 within 0.001, every derivative is ex<2 on [0,0.5], so ∣Rn∣≤(n+1)!2(0.5)n+1; n=3 gives 0.0052 (too big), n=4 gives ≈0.00052<0.001, so n=4.
Common mistakes
Forgetting the n! in cn=f(n)(a)/n!.
Plugging a into f(n+1) without checking it is the largest value on the interval. Pick M as the max of ∣f(n+1)∣ between a and x.
For sinx, p3=p4 (the x4 coefficient is 0), so you can use the sharper bound with R4.
7.4 Working with Taylor Series
Big idea
Binomial series (any real r): (1+x)r=∑(nr)xn for ∣x∣<1, where (nr)=n!r(r−1)⋯(r−n+1). If r is a whole number it stops (ordinary binomial expansion).
Get new series from the table by substituting, multiplying by xm, differentiating, or integrating, instead of computing derivatives.
Solving differential equations: assume y=∑cnxn, plug in, match coefficients (uniqueness), use the initial conditions for c0,c1.
Nonelementary integrals (like ∫e−x2dx): expand the integrand, integrate term by term, and bound the error with the alternating series test.
Formulas
Table: 1−x1=∑xn on (−1,1); ex=∑n!xn, sinx=∑(2n+1)!(−1)nx2n+1, cosx=∑(2n)!(−1)nx2n for all x.
ln(1+x)=∑n(−1)n+1xn on (−1,1]; tan−1x=∑2n+1(−1)nx2n+1 on [−1,1]; (1+x)r=∑(nr)xn on (−1,1).
Pendulum period: T=4gL∫0π/21−k2sin2θdθ, k=sin2θmax. First term: T≈2πgL; two terms: T≈2πgL(1+4k2).
Worked example (binomial series and an estimate): with r=31, (1+x)1/3=1+3x+2!31(−32)x2+3!31(−32)(−35)x3+⋯=1+3x−9x2+815x3−⋯, so 31.1≈1+30.1−90.01≈1.03222 (true value 1.03228).
From the table: replace x by x2 in sinx to get sin(x2)=∑n=0∞(2n+1)!(−1)nx4n+2=x2−6x6+120x10−⋯ (all x).
Nonelementary integral: ∫01sin(x2)dx=31−421+13201−⋯≈0.31028; alternating, so the error is less than the next term 15⋅7!1=756001≈1.3×10−5.
Differential equation y′=3y, y(0)=2: with y=∑cnxn, matching powers gives (n+1)cn+1=3cn; c0=2, so cn=n!2⋅3n and y=2∑n!(3x)n=2e3x.
Binomial coefficients: the top keeps going down by 1: r, r−1, r−2,… (e.g. 21,−21,−23). Watch the signs.
Substituting x2 but forgetting to square every x (so 3!x3 becomes 3!x6, not 3!x5).
In differential-equation problems, matching coefficients with the wrong powers. Line up the same power of x on both sides.
How the pieces connect
7.1 supplies the tool every later series needs: the ratio test finds R, and separate endpoint tests finish the interval.
7.2 turns 1−x1 into a factory: substitute, multiply by xm, differentiate, or integrate term by term. The radius survives; endpoints must be re-checked.
7.3 explains why the coefficients are forced: uniqueness means cn=n!f(n)(a), so a series built by 7.2 tricks is the same Taylor series derivatives would give.
Taylor's remainder (7.3) controls the error of any estimate; for alternating series the next-term bound (7.4) is the quicker option.
7.4 is the payoff: the memorized table plus the binomial series solve differential equations, nonelementary integrals, and limits without repeated differentiation.
Checklist
Ratio test for R, then test both endpoints
Rewrite a fraction as 1−ra
New interval after substituting bxm
Partial fractions, then two geometric series
Differentiate/integrate term by term (plus C)
Present value, finite and perpetual
cn=f(n)(a)/n!, Taylor polynomials
Remainder bound (n+1)!M∣x−a∣n+1
Smallest n for a given accuracy
Memorize the table of Maclaurin series
Binomial series for (1+x)r
Series solutions of differential equations and integrals