Maintaining clean, dry, and wrinkle-free bed linens is a nursing assistant's responsibility.
Clean linens are essential for:
Promoting healthy skin.
Controlling the spread of germs.
Ensuring the resident's comfort.
Maintaining a clean-smelling facility.
Essential Bed Linens
To make a clean and comfortable bed, you need:
Fitted sheet
Draw sheet (or lift sheet)
Top sheet (or flat sheet)
Pillowcases
Blanket
Bedspread
Lift Sheet
The lift sheet is used to reposition the resident in bed.
Incontinence Pads
Reusable incontinence pads are used to protect bed linens from becoming soiled by incontinent residents.
For residents using alternating-pressure mattresses or toppers, disposable incontinence pads should be used instead of reusable ones.
Reusable pads are too thick and may interfere with the pressure-relieving properties of these mattresses.
Only one pad should be used at a time on an alternating pressure topper or bed.
Mattress pads are generally used only in home-care or assisted-living settings where residents provide their own beds.
Bath Blankets
Bath blankets are lightweight blankets that offer warmth and privacy during caregiving.
Some facilities may not use bath blankets.
Alternatives include using a top sheet, bed blanket, or bedspread to keep the resident warm and dry.
Order of Linen Collection
Collect linens from the clean linen closet in the following order:
Bath blanket (if facility uses)
Fitted sheet
Draw sheet (lift sheet)
Reusable incontinence pad (if needed)
Top sheet
Blanket
Bedspread
Pillowcase(s)
Definitions
Linens: The bedding that covers the mattress.
Reusable incontinence pad: A reusable pad placed under the incontinent resident to protect bed linens.
Bath blanket: A lightweight blanket used to cover residents for warmth and privacy.
Frequency of Linen Changes
In assisted-living and long-term care facilities, linens are typically changed once or twice per week, often on the resident's bath day.
In acute care settings, linens are often changed daily.
Linens should be changed as needed if they become soiled, if the resident is sweating excessively, or if they are very wrinkled.
Infection Control During Bedmaking
Some facilities may require mattress disinfection before placing clean linens.
When handling linens:
Do not flick or shake them to avoid stirring up germs.
Unfold linens rather than shaking them.
Turn pillowcases inside out and grab the pillow corners to place the case over the pillow. Avoid shaking the pillow into the case.
If a pillow without a protector becomes wet or soiled, it should be discarded.
Position the pillow with the opening facing away from the door to protect it from germs.
Linens that fall on the floor or are not needed must be placed in the soiled linen bag.
Linens from one resident's room should never be taken into another resident's room.
Wear gloves before removing linens from the bed, as they are considered dirty.
Body Mechanics During Bedmaking
Move the bed away from the wall to avoid stretching, twisting, or leaning.
Raise the bed to a good working height (about waist high) to prevent bending and stooping.
Always bend with your knees, not at the waist.
Work on one side of the bed and then move to the other side.
Keep items you are using close by.
Lower the side rails while you work, but if changing an occupied bed, keep the opposite side rail up.
Return the bed to its original position, in the low position, with alarms and safety devices back in place, and brakes locked, after changing the linens.
Closed Versus Open Bed
Closed bed: A bed made with all linens in place, with the top sheet, blanket, and bedspread drawn up to the head of the bed.
Made prior to resident admission or after the resident gets out of bed for the day in long-term care.
Open bed: A bed with linens fanfolded down to the foot of the bed.
Invites the resident to lie down.
Made upon admission or when the resident is ready to go to bed.
When a resident is transferred from a stretcher, linens are fanfolded to one side of the bed.
Create a toe pleat by pulling upward on the linens over the resident's feet to relieve pressure on the toes.
How to Make the Unoccupied and Occupied Bed
Unoccupied Bed
An unoccupied bed is changed when the resident can get out of it.
The bed must be changed completely on every bath day, when linens are heavily soiled or wrinkled, and upon resident discharge.
Occupied Bed
An occupied bed change is necessary when a resident cannot get out of bed or when it is uncomfortable for them to do so.
Linens are removed and replaced with clean linens on one side of the bed first.
The resident is then asked to roll over, and the process is repeated on the opposite side of the bed.
The resident should never lie on a bare mattress during this process.
Soiled linens should be rolled inward to contain contamination, and clean linens should be tucked under the rolled soiled linens to prevent contamination.
Wrinkles are smoothed in the clean linens before the resident rolls back.
Ensure resident safety:
Position the bed at a good working height.
Always have the side rail up in the direction the resident is rolling.
The side rail can be used as a temporary positioning aid.
If side rails have been removed, always roll the resident toward you.
Place soiled linens in the soiled linen bag.
Remove gloves and perform hand hygiene after placing all soiled linens in the bag.
Take the soiled linen bag to the designated dirty storage room.