8th Grade Physical Science Final Exam Comprehensive Review Notes

Optics and the Human Eye

  • Path of Light for Mirror Reflection:

    • When viewing an image of your smile in a flat mirror, light rays follow a specific path: Smile → Mirror → Eyes.

  • Mirror Types and Diagrams:

    • Concave Mirror: A mirror that curves inward like the inside of a bowl.

    • Convex Mirror: A mirror that curves outward like the back of a spoon.

  • Lens Types and Diagrams:

    • Concave Lens: Thinner in the middle than at the edges.

    • Convex Lens: Thicker in the middle than at the edges.

  • Refraction in Lenses vs. Flat Glass:

    • A flat piece of glass allows light to pass through with minimal bending.

    • In contrast, the curve in a lens causes it to refract light differently by bending it, which causes the light to spread out.

  • The Process of Sight:

    • As light (an image) reaches the eye, it follows this sequence:

      1. Light enters the cornea.

      2. It passes through the pupil, an opening whose size is controlled by the iris.

      3. The lens focuses the light onto the retina.

      4. Rods and cones on the retina detect the image and send signals to the brain.

    • Image Orientation: While the retina receives the image, it is originally oriented upside down before the brain processes it.

Electromagnetic (EM) Waves

  • Composition of EM Waves:

    • Electromagnetic waves are made up of two types of fields: Electric fields and Magnetic fields.

  • Energy Transfer:

    • EM waves transfer energy through a vacuum in the form of Radiation.

  • Comparison to Mechanical Waves:

    • EM waves are fundamentally different from mechanical waves because they require no medium to travel through.

  • The Electromagnetic Spectrum:

    • The spectrum categorized from longest wavelength to shortest wavelength is as follows:

      • Radio waves

      • Microwaves

      • Infrared

      • Visible Light

      • Ultraviolet (UV)

      • X-Rays

      • Gamma Rays

    • Spectrum Properties:

      • Longest Wavelength / Lowest Frequency / Least Energy: Radio waves.

      • Shortest Wavelength / Highest Frequency / Most Energy: Gamma rays.

  • Inversely Related Properties:

    • Frequency and wavelength change from one end of the spectrum to the other because they are inversely related. As wavelength increases, frequency decreases, and vice versa.

Reflection and Wave Behaviors

  • The Law of Reflection:

    • Angle of Incidence: This is the angle at which light hits a surface.

    • Equality: The angle of incidence ALWAYS equals the angle of reflection.

  • Mirror Mechanism:

    • Mirrors reflect light by allowing light to bounce off their smooth surfaces.

  • Wave Measurements:

    • There are three main properties of a wave that can be measured:

      1. Amplitude

      2. Wavelength

      3. Frequency

  • Energy and Amplitude:

    • Amplitude is directly related to energy: A greater amplitude means a greater energy level.

  • Main Types of Wave Behaviors:

    • Reflection: This occurs when waves bounce back after hitting a surface.

    • Refraction: This refers to the bending of waves as they pass from one medium to another.

    • Diffraction: This is the process of waves spreading out as they move around an obstacle or through an opening.

Sound and Acoustics

  • Sound Properties (Intensity, Pitch, Vibrations):

    • Amplitude and Intensity: A greater amplitude makes a sound louder.

    • Frequency and Pitch: A higher frequency results in a higher pitch (Higher frequency=Higher pitchHigher\,frequency = Higher\,pitch).

    • Vibrations: Faster vibrations create both a higher frequency and a higher pitch.

  • Sound Attenuation:

    • We hear sounds clearly up close but not from a distance because sound waves get weaker as they travel further away.

  • Medium and Sound Speed:

    • Sound travels differently through different mediums.

    • The factors that affect the speed of sound are the Medium and the Temperature.

  • Energy and Loudness:

    • More energy results in a sound that is louder.

Motion and Acceleration

  • Frames of Reference:

    • A person's position determines their reference point. For example, a person inside a car may say, "The store is behind us," while a person standing on the sidewalk might say, "The store is across the street."

  • Terminology of Motion:

    • Speed: How fast something moves.

    • Velocity: Speed in a specific direction.

    • Vector: A quantity that involves both magnitude and direction.

  • Calculating Velocity (Example):

    • Scenario: Sosh lives 14 miles14\,miles from Tamsyn's house and it takes her 6 minutes6\,minutes to arrive.

    • Calculation: V=14 mi6 min=2.33 mi/minV = \frac{14\,mi}{6\,min} = 2.33\,mi/min

  • Methods of Acceleration:

    • There are three ways an object can accelerate:

      1. Speeding up.

      2. Slowing down.

      3. Changing direction.

  • Calculating Acceleration (Example):

    • Scenario: A bike slows down from 15 m/s15\,m/s to 5 m/s5\,m/s in 2 seconds2\,seconds.

    • Formula and Calculation: A=Vfinal−VinitialTime=5 m/s−15 m/s2 s=−5 m/s2A = \frac{V_{final} - V_{initial}}{Time} = \frac{5\,m/s - 15\,m/s}{2\,s} = -5\,m/s^2

Forces and Newton’s Laws

  • Types of Forces:

    • The three primary types of forces discussed are:

      1. Gravity

      2. Friction

      3. Pressure

  • Net Force Calculation:

    • Net force is calculated by adding forces that move in the same direction.

  • Newton’s Three Laws of Motion:

    • 1st Law (Inertia): Objects in motion stay in motion, and objects at rest stay at rest, unless acted upon by an outside force (Example: Kicking a soccer ball).

    • 2nd Law (F=maF = ma): More force results in more acceleration (Example: Pushing a cart).

    • 3rd Law (Action/Reaction): For every action, there is an equal and opposite reaction (Example: Jumping off a boat).

  • Inertia and Mass:

    • Inertia is directly compared through mass. For example, a bowling ball has significantly more inertia than a ping pong ball because it has more mass.

  • Relationship of Force, Mass, and Acceleration:

    • The formula is Force=Mass×AccelerationForce = Mass \times Acceleration (F=MAF = MA).

    • Newton's 2nd law explains that more force causes more acceleration, whereas more mass makes acceleration harder to achieve.

Gravity, Friction, and Momentum

  • Momentum:

    • Momentum is equal to mass times velocity (p=mvp = mv). An object with more mass or more speed possesses more momentum and is harder to stop.

  • Gravity:

    • Gravity is a force that pulls objects toward each other.

    • The relationship is defined by mass: the more mass an object has, the stronger its gravitational force.

    • Mass vs. Weight: Mass is the actual amount of matter in an object, while weight is the force of gravity acting upon that specific mass.

    • "Greater mass results in greater force" means that objects with more mass exert a stronger gravitational pull.

  • Friction and Air Resistance:

    • Friction: A force that opposes motion between two surfaces that are touching each other.

    • Air Resistance: This is a specific type of friction because the air pushes against moving objects and slows them down.

Work, Energy, and Power

  • Work (W=F×DW = F \times D):

    • Work occurs when a force causes an object to move a specific distance.

  • Kinetic Energy (KE):

    • Energy resulting from motion.

    • Example 1: A moving car is kinetic energy because it is in motion.

    • Example 2: A rolling basketball is kinetic energy because it is in motion.

  • Potential Energy (PE):

    • Stored energy based on position or condition.

    • Example 1: A stretched rubber band has energy stored within it.

    • Example 2: A book on a shelf has potential energy because of its height.

  • Power:

    • Power is defined as how fast work is being done.

Machines

  • Purpose of Machines:

    • Machines help in performing work by making the task easier. They do this by changing the Size or the Direction of the force applied.

  • Simple vs. Compound Machines:

    • Simple Machines: These make work easier by reducing the amount of force needed.

    • Compound Machines: These are complex machines made up of two or more simple machines working together.

Mechanical Waves

  • Types of Mechanical Waves:

    • Transverse Waves: The disturbance moves up and down (perpendicular to the direction of wave travel).

    • Longitudinal Waves: The disturbance moves back and forth (parallel to the direction of wave travel).

  • Anatomy of a Wave:

    • Crest: The highest point of a transverse wave.

    • Trough: The lowest point of a transverse wave.

    • Amplitude: The height/depth from the rest position to the crest/trough.

    • Wavelength: The distance between two consecutive crests or two consecutive compressions.

    • Compression: The area in a longitudinal wave where the particles are pressed together.

    • Disturbance: The pulse or energy causing the wave.

    • Direction of Wave: The path in which the energy is traveling.