BSE Mod 2 PPT

BIOSCIENCE FOR ENGINEERS

Presented by: Prof Parvathy Lakshmy

ORIGIN OF BIOELECTRIC SIGNALS

Definition: The human body functions as a complex power station that generates multiple types and patterns of electrical signals essential for various physiological processes.

Sources: Bioelectric signals are derived from two primary internal sources — muscles and nerves, both of which are vital for voluntary and involuntary movements.

Muscle Contraction:

  • Muscle contraction is primarily associated with ion migration across the muscle cell membranes, which generates measurable potential differences. Electrodes are used to detect these changes, which reflect the electrical activity during contraction.

Nerve Signals:

  • Nerve signals result from electrochemical changes along nerve fibers (neurons) as they transmit information throughout the body. Neurotransmitters and ion exchanges contribute significantly to the conduction of signals along these nerves, leading to various bioelectric potentials.

Cellular Source:

  • Bioelectric potentials originate at the cellular level, stemming from ionic movements across the cell membrane, thus emphasizing their ionic nature.

Cellular Structure

Structure of a Cell: Each cell acts as an ionic conductor, facilitated by a semipermeable membrane that regulates the passage of ions and maintains cellular homeostasis.

Ionic Medium: Body fluids, which include interstitial fluid and plasma, consist of electrolytes providing a conduction medium essential for bioelectric signal transmission.

Key Ions

Primary Ions: Sodium (Na+), Potassium (K+), and Chloride (Cl–) are critical for generating and maintaining cell potentials, influencing excitability and signal conduction.

Membrane Permeability:

  • K+ and Cl– ions can enter and exit the cell relatively freely, while Na+ ions are restricted from entering the cell under resting conditions, contributing to the resting membrane potential.

Resting Membrane Potential

Charge Distribution: There is a higher concentration of Na+ ions outside the cell compared to the inside, leading to a negative inner membrane charge, which is fundamental to the cell's stability and readiness to respond to stimuli.

Polarized State: The resting potential, typically around -70mV to -90mV, indicates that the cell is polarized. Depolarization occurs when this potential decreases, allowing the cell to become more excitable.

ACTION POTENTIAL WAVEFORM

Stimulus Levels:

  • Baseline: 0 mV

  • Polarized Cell: -60 mV

  • Resting Potential: -90 mV

  • Action Potential Generation: +20 mV

Phases:

  • The action potential consists of distinct phases such as depolarization, where the cell membrane potential rapidly rises, followed by repolarization which restores the negative potential. This is illustrated in Fig. 2.1.

ELECTRICAL ACTIVITY IN MUSCLES

Wave of Excitation: When a wave of excitation propagates through muscle fibers, it triggers muscle contraction resulting in the production of electric voltages (action potentials) monitored by surface electrodes.

Post-Contraction: After a contraction, a process called repolarization occurs, leading to muscle relaxation. The dynamics of contraction and relaxation illustrate the muscular bioelectric behavior crucial for movement and structural integrity.

MEASUREMENT OF BIOELECTRIC SIGNALS

Synchronized Cell Activity: Bioelectric signals arise from the collective activity of large groups of cells. This coordinated behavior ensures functionality and communication within physiological systems.

Charge Migration: Unexcited cell regions contribute to potential differences across the body, which are measurable with electrodes configured appropriately to detect such variations.

Table 2.1 Bioelectric Signals Parameters:

  • ECG: 0.05 to 120 Hz; 0.1 to 5 µV.

  • EEG: 0.1 to 100 Hz; 2 to 200 µV.

  • EMG: 5 to 2000 Hz; 0.1 to 5 µV.

  • ERG: DC to 20 Hz; 0.5 to 1 µV.

  • EOG: DC to 100 Hz; 10 to 3500 µV.

ELECTROCARDIOGRAM (ECG)

Definition: It is a recording of the electrical activity of the heart, reflecting the rhythmic beating pattern generated by the cardiac muscle.

Mechanism: The ECG is governed by dipoles generating field vectors that undergo periodic changes corresponding to electrical events in the heart.

Standardized Waveforms

  • Analyses are based on amplitude and phase relationships that define the normal functioning of the heart.

SA Node: The Sinoatrial (SA) Node functions as the primary pacemaker of the heart, located in the right atrium; it initiates the electrical impulses that drive heartbeats.

Conduction: Action potentials propagate from the atria to the AV node, and then through the ventricles, ensuring coordinated contractions necessary for effective blood circulation.

Normal ECG Wave Pattern (Fig. 2.4)

  • Important intervals include:

    • PR interval: 0.12 to 0.2 s

    • QRS interval: 0.05 to 0.10 s

  • T Wave: Represents ventricular repolarization.

ELECTROENCEPHALOGRAM (EEG)

Definition: The EEG measures rhythmic electrical potentials generated by neurons in the brain, producing surface waveforms that can be analyzed for neurological conditions.

Action: It is a summation of synchronized cell discharges across cortical regions; resting potential averages approximately -70 mV.

EEG Frequencies

  • Delta: 0.5 – 4 Hz;

  • Theta: 4 – 8 Hz;

  • Alpha: 8 – 13 Hz;

  • Beta: 13 – 22 Hz;

  • Gamma: 22 – 30 Hz.

Diagnostic Importance

  • Variations in amplitude and frequency are critical indicators of brain states, including sleep stages and responses to sensory stimuli, leading to specific measurements in clinical assessments.

ELECTROMYOGRAM (EMG)

Definition: The EMG measures action potentials from contracting skeletal muscles, capturing rapid repolarization events indicative of muscle fatigue and health.

EMG Characteristics

  • The activity recorded in EMG focuses primarily on the overall measure of muscle function rather than analyzing individual muscle fibers; typical voltage potentials range between 50 mV to 5 mV.

BIOSIGNALS

Bio signals arise from biological systems and include EEG, EMG, ECG, and EOG. These signals reflect physiological states and are crucial for various biomedical applications.

Key Characteristic Types

  • Origin: Signals can be classified based on their origin — neural, muscular, and cardiac sources.

  • Amplitude & Frequency: There is a wide variances in amplitude and frequency between the various types of bio signals, with common ranges noted for signals like EEG (10-100 µV) and ECG (0.5-4 mV).

Waveform Patterns & Durations

  • Each type of bio signal has specific waveform traits that reflect physiological states; their durations also vary according to the type of bio signals being measured.

ELECTRODE CONFIGURATIONS

Electrode configurations are essential for the accurate measurement of bio signals, with different types serving unique functions.

Notable Components

  • Skin Contact Impedance: The electrical characteristics at the electrode-tissue interface are critical for signal quality and can be affected by motion artifacts.

Types of Electrodes

  • Limb Electrodes: Often used in ECG studies; the application of silver-silver chloride electrodes is common to reduce motion artifacts.

  • Floating Electrodes: Designed to reduce relative motion at the metal-jelly interface, improving measurement fidelity.

PREGELLED DISPOSABLE ELECTRODES

  • These electrodes were designed to counteract physiological stressors during long-term monitoring, helping to minimize baseline shifts and noise from motion artifacts.

Paste-less Electrodes

  • Researchers are exploring alternatives that minimize skin preparation processes and reduce potential patient discomfort, increasing the feasibility of long-term monitoring.

GLASS AND METAL MICROELECTRODES

  • Microelectrodes are utilized for individual cell studies; they require robustness yet also must be small enough to penetrate cells without causing damage, preserving their integrity for research purposes.

  • Electrolyte and Impedance: High impedance is preferred during measurements to avoid loading the circuits, necessitating amplifiers with high input impedances for accurate readings.