Plane Geometry: Geometric Objects, Measurements, and Angles

Foundations and Branches of Geometry

Table of plane geometry objects, drawings, and notations

  • Primary branches of geometry (meetkunde):
    • Plane geometry (vlakke meetkunde): The study of two-dimensional figures lying entirely within a single flat plane.
    • Solid geometry or space geometry (ruimte meetkunde): The study of three-dimensional geometric figures and spatial configurations.
  • Fundamental geometric objects in the plane (meetkundige objecten in het vlak):
    • Plane (vlak):
    • Geometric properties: A flat, two-dimensional surface that is infinitely large (oneindig groot) and extends boundlessly in all directions.
    • Graphical representation: Depicted as a four-sided tilted parallelogram.
    • Mathematical notation: Denoted by lowercase Greek letters, such as α\alpha or π\pi.
    • Point (punt):
    • Geometric properties: An exact location in space possessing zero dimensions (no length, width, or height).
    • Graphical representation: Depicted as a single distinct dot.
    • Mathematical notation: Denoted by capital letters (e.g., PP, AA, BB).
    • Straight line (rechte):
    • Geometric properties: A continuous, one-dimensional path of points that is infinitely long (oneindig lang), possessing no thickness and extending infinitely in both directions.
    • Graphical representation: Depicted as a continuous straight line without terminal endpoints.
    • Mathematical notation:
      • Denoted by a single lowercase Latin letter (e.g., aa, bb, ll, mm).
      • Denoted by two distinct points lying on the line, written as CDCD or ↔\leftrightarrow across CDCD.
    • Line segment (lijnstuk):
    • Geometric properties: A bounded straight part of a line connecting two specific points; it is not infinitely long (niet oneindig lang) and has a measurable finite length.
    • Graphical representation: Depicted as a straight segment bounded by two visible endpoints (EE and FF).
    • Mathematical notation: Denoted by enclosing the two endpoints in closed square brackets: [EF][EF].
    • Half-line or ray (halfrechte):
    • Geometric properties: A straight line that starts at a fixed initial endpoint and extends infinitely in one direction.
    • Graphical representation: Depicted with a closed endpoint at the starting point (GG), continuing through an orientation point (HH) and extending past it indefinitely.
    • Mathematical notation:
      • Two-point notation: Written with a closed bracket at the origin and an open bracket or parenthesis at the unbounded side, such as [GH)[GH) or [GH[[GH[.
      • Single-letter notation: Written as a lowercase letter with an overline or ray symbol, such as lˉ\bar{l} or ll.
    • Carrier line (drager):
    • Definition: The infinite straight line that completely contains a given line segment.
    • Notation and relationship: For a line segment [KL][KL], its carrier line (drager van lijnstuk [KL]) is the line mm (or line KLKL), such that the segment is a subset of the line ([KL]⊂m[KL] \subset m).
  • Set-membership notations for points and lines:
    • Element of a line: When a point lies on a line, it belongs to the line, denoted by the membership symbol ∈\in (e.g., K∈lK \in l indicates point KK lies on line ll).
    • Not an element of a line: When a point does not lie on a line, it does not belong to the line, denoted by the non-membership symbol ∉\notin (e.g., K∉lK \notin l indicates point KK does not lie on line ll).

Measurement and Construction of Line Segments

Diagrams for measuring line segment length, segment construction, and segment midpoint

  • Determining the length of a line segment (De lengte van een lijnstuk bepalen):
    • Definition of length: The scalar distance between the two endpoints of a segment.
    • Mathematical notation: The length of segment [AB][AB] is denoted by placing the endpoint letters between vertical bars: ∣AB∣|AB|.
    • Distinction between segment and length:
    • [AB][AB] refers to the geometric object itself (the set of points between and including AA and BB).
    • ∣AB∣|AB| represents the numerical value and unit of its length.
    • Concrete measurement: For a segment measuring five centimeters,     ∣AB∣=5 cm|AB| = 5\,\text{cm}
  • Constructing an equal line segment (Een gelijk lijnstuk construeren):
    • Objective: Construct a line segment [CD][CD] that has the exact same length as a given line segment [AB][AB].
    • Equality condition:     ∣CD∣=∣AB∣|CD| = |AB|
    • Instrument used: A compass (passer) is used to measure the exact opening distance between AA and BB, which is then transferred onto a new ray to construct point DD from point CC.
  • Midpoint of a line segment (Het midden van een lijnstuk):
    • Definition: The midpoint MM is the unique point on a line segment that divides it into two sub-segments of equal length.
    • Conditions for midpoint MM of segment [EF][EF]:
    • Point MM must lie on the segment:       M∈[EF]M \in [EF]
    • The lengths of both halves must be identical:       ∣EM∣=∣MF∣|EM| = |MF|
    • Diagrammatic convention: Identical tick marks are drawn across both sub-segments [EM][EM] and [MF][MF] to indicate equal measure.

Fundamentals and Classification of Angles

Visual representation of angle components, sexagesimal units, and classification of angle types

  • Components and naming of an angle (Benamingen en notatie):
    • Structural components:
    • One vertex (hoekpunt): The common point of origin from which both rays originate (e.g., point BB).
    • Two legs or arms (benen): The two rays that originate from the vertex and bound the angle (e.g., rays passing through AA and CC).
    • Notation formats:
    • Vertex notation with caret: Denoted by the vertex capital letter topped with a caret, such as B^\hat{B}.
    • Three-letter notation: Written with the vertex letter positioned in the center between points on each leg, such as ABC^\widehat{ABC} or CBA^\widehat{CBA}.
    • Indexed notation: Written with subscript indices when multiple angles share the same vertex, such as B1^\widehat{B_1}.
  • Magnitude and sexagesimal measurement units (De hoekgrootte):
    • Unit breakdown: Angle size is expressed in degrees (graden), minutes (minuten), and seconds (seconden).
    • Notation symbols:
    • Degrees: ∘^\circ
    • Minutes: ′'
    • Seconds: ′′''
    • Sexagesimal conversion ratios:
    • One degree contains sixty minutes:       1∘=60′1^\circ = 60'
    • One minute contains sixty seconds:       1′=60′′1' = 60''
    • Worked examples:
    • Compound sexagesimal angle: 45∘ 32′ 50′′45^\circ\,32'\,50''
    • Decimal conversion: A half-degree (0,5∘0{,}5^\circ) equals thirty minutes (30′30'):       45,5∘=45∘ 30′45{,}5^\circ = 45^\circ\,30'
  • Classification of angle types by size (Soorten hoeken):
    • Zero angle (Nulhoek):
    • Definition: An angle whose legs coincide completely without opening.
    • Measure:       A^=0∘\hat{A} = 0^\circ
    • Acute angle (Scherpe hoek):
    • Definition: An angle strictly greater than zero degrees and strictly less than ninety degrees.
    • Measure range:       0∘<B^<90∘0^\circ < \hat{B} < 90^\circ
    • Right angle (Rechte hoek):
    • Definition: An angle formed by two perpendicular rays.
    • Measure:       C^=90∘\hat{C} = 90^\circ
    • Diagrammatic convention: Indicated by a square corner symbol or an arc containing a dot at vertex CC.
    • Obtuse angle (Stompe hoek):
    • Definition: An angle strictly greater than ninety degrees and strictly less than one hundred eighty degrees.
    • Measure range:       90∘<D^<180∘90^\circ < \hat{D} < 180^\circ

Geometric Relationships Between Pairs of Angles

Overview of relationships between two angles including vertical, complementary, supplementary, and adjacent angles

  • Vertically opposite angles (Overstaande hoeken):
    • Configuration: Two angles formed across from each other by two straight intersecting lines.
    • Invariant property: Vertically opposite angles are always congruent (altijd congruent), meaning they have identical angle measures.
    • Expression:     1^=2^\hat{1} = \hat{2}
  • Complementary angles (Complementaire hoeken):
    • Definition: Any two angles whose angle measures sum to exactly ninety degrees.
    • General equation:     A^+B^=90∘\hat{A} + \hat{B} = 90^\circ
    • Concrete calculation example: Given angles of 50∘50^\circ and 40∘40^\circ,     50∘+40∘=90∘50^\circ + 40^\circ = 90^\circ90∘−40∘=50∘90^\circ - 40^\circ = 50^\circ90∘−50∘=40∘90^\circ - 50^\circ = 40^\circ
    • Positional independence: The angles need not be adjacent or share a vertex; as long as their numerical sum equals 90∘90^\circ, they are complementary.
  • Supplementary angles (Supplementaire hoeken):
    • Definition: Any two angles whose angle measures sum to exactly one hundred eighty degrees.
    • General equation:     C^+D^=180∘\hat{C} + \hat{D} = 180^\circ
    • Concrete calculation example:     135∘+45∘=180∘135^\circ + 45^\circ = 180^\circ
    • Positional independence: The angles do not need to share a common vertex or leg; the definition depends solely on the sum equaling 180∘180^\circ.
  • Adjacent angles (Aanliggende hoeken):
    • Defining geometric requirements: Two angles that simultaneously share:
    • A common vertex (gemeenschappelijk hoekpunt).
    • A common leg or side (gemeenschappelijk been).
    • Distinct, non-overlapping interiors lying on opposite sides of the shared leg.
  • Adjacent supplementary angles or linear pairs (Nevenhoeken):
    • Definition: Angles that are both adjacent and supplementary (aanliggend + supplementair).
    • Defining geometric characteristics:
    • They share a common vertex and a common leg.
    • Their non-common legs form opposite rays along a single continuous straight line.
    • Their measures sum to a straight line angle:       1^+2^=180∘\hat{1} + \hat{2} = 180^\circ