CAIE IGCSE Mathematics 0580 Theory Study Guide
Numbers
Types of Numbers
Natural Numbers: Positive integers used for counting purposes, starting from . All positive integers excluding zero fall into this category.
Integer: All whole numbers, including positive numbers, negative numbers, and zero (e.g., ).
Prime Numbers: A number that has exactly two distinct factors: itself and . Note that is not a prime number.
Rational Numbers: Any number that can be written as a fraction , where and are integers and .
Irrational Numbers: Numbers that cannot be written as simple fractions. Their decimal expansions are non-terminating and non-recurring (e.g., ).
Square Numbers: The result of multiplying a number by itself twice (e.g., ).
Cube Numbers: The result of multiplying a number by itself three times (e.g., ).
Reciprocals: The reciprocal of a number is divided by that number. For example, the reciprocal of is . Zero has no reciprocal.
Common Multiples: A number that is a multiple of two or more given numbers. For example, common multiples of and include and , as they appear in the multiplication tables of both and .
Common Factors: A number that divides two or more numbers exactly.
Factors of :
Factors of :
Common factors of and :
Prime Factors, LCM, and HCF
Prime Factorisation: Writing a number strictly as a product of its prime factors (e.g., ).
Factor Tree Method: Break the number down step-by-step into prime components.
Division Method: Continuously divide by the smallest prime factor until reaching
Highest Common Factor (HCF): The product of common prime factors shared by the given numbers.
Lowest Common Multiple (LCM): The product of all prime factors present in the set representation or Venn diagram.
Powers and Roots
Squares and Square Roots:
Squaring a number means multiplying it by itself: (e.g., , ).
A Square Root is the number that, when squared, yields the original number: (both and serve as square roots of ).
Examples: , , ,
Cubes and Cube Roots:
Cubing a number means multiplying it by itself three times: (e.g., , ).
A Cube Root is the number that, when cubed, yields the original number: ,
Other Powers and Roots:
A power indicates how many times to multiply a base by itself: .
A root is the inverse operation of a power: , because
The th root of a number is the value such that , expressed as
Fractional indices represent roots and powers combined together:
Estimation and Accuracy
Accuracy Bounds:
Upper Bound: The largest possible value a measurement could be, given its degree of accuracy.
Lower Bound: The smallest possible value a measurement could be, given its degree of accuracy.
Calculation Procedure: Half the degree of accuracy, then add this value to the stated measurement for the upper bound, and subtract it for the lower bound.
Worked Example: Find the upper and lower bound of to the nearest
Significant Figures (s.f.):
All non-zero digits count: has
Zeros between non-zero digits count: has
Leading zeros do not count: has
Trailing zeros count only if a decimal point is explicitly present: (no decimal) has , whereas has
Rounding Examples to 1 s.f.: ;
Rounding Examples to 2 s.f.: ;
Sets
Definition: A set is a collection of elements (e.g., , , , ).
Set Notation:
: "…is an element of…"
: "…is not an element of…"
: Complement of set (all elements inside the universal set that are not in set
: Empty set (e.g., )
: Universal set containing all possible elements under consideration
: Union (all elements present in set , set , or both)
: Intersection (elements common to both set and set
: Subset (all elements of are in , and can equal
: Proper Subset (all elements of are in , and
: Not a Subset ( contains at least one element outside of
: Number of elements contained within set
Equal Sets: Two sets that contain identical elements regardless of the order in which they are written.
Fractions, Decimals, and Percentages
Fractions: Express a part of a whole (e.g., ).
Numerator: Represents how many parts are taken.
Denominator: Represents the total number of equal parts dividing the whole.
Proper Fraction: Numerator is strictly less than the denominator (e.g., ).
Improper Fraction: Numerator is greater than or equal to the denominator (e.g., ).
Mixed Fractions: Composed of a whole number combined with a proper fraction (e.g., ).
Conversion of Improper Fraction to Mixed Fraction: Divide the numerator by the denominator. The quotient becomes the whole number, the remainder becomes the new numerator, and the denominator remains unchanged.
Decimals: Consists of a whole number part and a fractional part separated by a decimal point.
Recurring Decimals: A digit or block of digits repeats infinitely after the decimal point (e.g., ).
Converting Recurring Decimals to Fractions: Let equal the recurring decimal. Let equal the number of repeating digits in the recurring pattern. Multiply the recurring decimal by . Subtract the original expression from this new product. Solve the linear equation for and simplify to lowest terms.
Percentages: 'Per cent' means out of a hundred (
Conversions:
Percentage to Decimal: Divide by (e.g., ).
Decimal to Percentage: Multiply by (e.g.,
Percentage to Fraction: Write over a denominator of and simplify (e.g., ).
Fraction to Percentage: Divide numerator by denominator and multiply by (e.g., ; or
Ordering Symbols
: Shows when two values are equal
: Shows when two values are not equal
: Value on the left is strictly greater than the value on the right
: Value on the left is strictly less than the value on the right
: Value on the left is greater than or equal to the value on the right
: Value on the left is less than or equal to the value on the right
Laws of Indices
Multiplication Rule: When multiplying terms with identical bases, add the exponents: (e.g.,
Division Rule: When dividing terms with identical bases, subtract the exponents: (e.g.,
Zero Index: Any non-zero number raised to the power of equals :
Power of a Power Rule: When a base raised to a power is raised to another power, multiply exponents: (e.g.,
Negative Exponents: A negative power represents the reciprocal of the base raised to the corresponding positive power: (e.g., ).
Fractional Exponents: The denominator of the exponent indicates the root, and the numerator indicates the power: (e.g.,
Shared Exponents: When two numbers share an exponent, they can share the operational bracket: (e.g., ) and (e.g., ).
Standard Form
Used to express large or small numbers as a product of a number between and (inclusive of ) and an integer power of : where
Numbers Greater than 10: E.g.,
Count the number of digits after the first significant digit (): there are digits after
Use as the positive power of
Place a decimal point after the first non-zero digit and remove non-significant trailing zeros:
Numbers Less than 1: E.g.,
Count the number of zeros before the first non-zero digit including the zero before the decimal point: there are zeros.
Use as the negative power of
Place a decimal point after the first non-zero digit:
Ratio, Proportion, and Surds
Ratio Simplification: Find the Highest Common Factor (HCF) of the numbers in the ratio and divide all terms by that HCF.
Surd Operations:
Only like surds can be added or subtracted: . Unrelated surds such as cannot be combined.
Multiplication Rule: (e.g.,
Division Rule: (e.g.,
Simplifying Surds:
Foreign Exchange: Money is converted between currencies using direct proportional scaling. For example, if , then .
Map Scales: Conversion ratios for distance calculations:
Direct Variation: is directly proportional to : (where is the constant of proportionality).
Inverse Variation: is inversely proportional to :
Percentages Applications
Expressing Quantity as Percentage: Divide first quantity by second quantity and multiply by
Percentage of Quantity: Multiply quantity by percentage written as a decimal.
Percentage Change: A positive result indicates a percentage increase; a negative result indicates a percentage decrease.
Multiplier Formula for Increase/Decrease:
Simple Interest: Interest calculated purely on the initial principal amount. where , , and . To find final total value, add to the computed interest.
Compound Interest: Interest added to the principal so that interest earns interest on accumulated values.
Time and Currency
Time Unit Conversions:
( in a leap year)
Clock Formats:
-hour clock uses "a.m." for morning and "p.m." for afternoon/evening.
-hour clock runs continuously from (midnight) to
a.m. Conversion: Retain number format, add leading zero if needed (
p.m. Conversion: Add to the hour digit (
Time Zones: If it is in London (GMT) and New York is hours behind: in New York.
Currency Conversion Formula:
Speed, Distance, and Time
Fundamental Formulas:
Unit Conversion Factors:
To convert to , multiply by
To convert to , multiply by
Worked Example 1 (km/h to m/s): Convert into metres per second.
Worked Example 2 (m/s to km/h): Convert into kilometres per hour.
Algebra and Graphs
Algebraic Manipulation
Simplification: Combine like terms (terms that share identical variable components and powers).
Example: Simplify
Expansion: Multiply terms outside brackets by every individual term inside.
Single Bracket Example: Expand
Double Bracket Example: Expand
Factorization: Extract the Highest Common Factor (HCF) outside the bracket.
Example: Factorize
HCF of numerical coefficients and is
HCF of algebraic variables and is
Overall HCF is
Divide each original term by : and
Final Result:
Algebraic Fractions
Simplifying Algebraic Fractions: Factorize the numerator and denominator completely, then cancel out common factors.
Example:
Multiplying Algebraic Fractions: Multiply numerators together and denominators together.
Dividing Algebraic Fractions: Invert the second fraction and multiply.
Adding and Subtracting Algebraic Fractions: Find the Lowest Common Denominator (LCD), convert all terms to share this common denominator, then add or subtract numerators.
Example:
Sequences
Linear Sequences: A sequence with a constant first difference between consecutive terms.
Formula for th term:
where , , and
Quadratic Sequences: A sequence with a constant second difference.
General Form:
Coefficient Relations: (second difference), (first difference between term 1 and term 2), (first term).
Alternative Formula:
Cubic Sequences: A sequence with a constant third difference.
General Form:
Coefficient Relations: (third difference), (second difference), (first difference),
Alternative Formula:
Exponential Sequences (Geometric Progression): Each term is multiplied by a constant ratio
Formula for th term:
where and
Quadratic Equations
General Form: where
Methods of Solution
Factorization: Rewrite the quadratic expression as two linear factors and apply zero product rule.
Example 1: Solve
Coefficients:
Find factors of that add up to : and
Factorized form:
Solutions: or
Example 2: Solve
Coefficients:
Find factors of that add up to : and
Rewrite middle term:
Group terms:
Factorized form:
Solutions: or
Quadratic Formula:
Derivation: Made by making the subject in via completing the square:
Worked Example: Solve using formula.
or
Completing the Square: Expression transformed into
The turning point (vertex) of the parabola is located at
Worked Example: Solve
Take half of :
Square it:
Add and subtract :
Write as perfect square:
Solve:
or
Graphing Method: Plot . The roots are the -intercepts where
Inequalities
Solve using algebraic isolation steps identical to linear equations.
Critical Rule: Reversals of the inequality sign occur whenever multiplying or dividing both sides by a negative number.
Worked Example 1: Solve
Worked Example 2: Solve
Compound Inequality Example: Solve
Split into two inequalities:
Combine results:
Proportion Types Summary
Linear Proportion:
Square Proportion:
Square Root Proportion:
Cube Proportion:
Cube Root Proportion:
Inverse Proportion:
Rectangular Graphs (Hyperbolas)
Basic Form:
Transformed Form:
shifts the hyperbola horizontally and vertically.
If : Branches lie in 1st and 3rd quadrants relative to asymptotes.
If : Branches lie in 2nd and 4th quadrants relative to asymptotes.
Asymptotes: Lines the curve continuously approaches but never crosses.
Vertical Asymptote:
Horizontal Asymptote:
For , asymptotes are and
Lines of Symmetry: Hyperbolas are symmetrical about lines angled at passing through the intersection of asymptotes (e.g., and for ).
Cubic Equations
Standard Form:
Key Properties: Highest power of is . Contains up to turning points and point of inflection.
Curve Orientation: If , curve goes from bottom-left to top-right (min-max structure). If , curve goes from top-left to bottom-right.
Finding Turning Points: Set derivative to zero: and solve for
Exponential Graphs
Standard Form:
Parameters:
: Vertical stretch factor (initial value offset when ).
: Base rate factor. If , curve increases exponentially. If , curve decays exponentially.
: Vertical shift, defining horizontal asymptote
Gradient of a Curve
For non-linear functions, gradient varies at every point.
Tangent Method:
Plot graph precisely on grid.
Locate target -coordinate.
Construct a straight tangent touching the curve at only that point.
Calculate gradient of tangent line using
Differentiation
Calculates derivative , representing instantaneous gradient of function.
Power Rule:
Example:
Constants Rule: Derivative of any constant number equals zero (
Stationary Points: Points where gradient equals zero (
Determining Nature of Stationary Points:
Second Derivative Test: Compute
If : Point is a Local Minimum (-shape).
If : Point is a Local Maximum (-shape).
Gradient Sign Check Test: Evaluate gradient slightly to the left and right of turning point.
indicates Maximum.
indicates Minimum.
Advanced Algebraic Indices Worked Examples
Example 1: Solve
Convert to common base:
Substitute:
Equate exponents:
Example 2: Simplify
Group numerical coefficients:
Apply product index law to variables:
Combine:
Simultaneous Equations
Elimination Method
Solve system: (Equation 1) and (Equation 2)
Add Equation 1 and Equation 2:
Substitute into Equation 2:
Solution:
Substitution Method (Linear and Linear)
Solve system: (Equation 1) and (Equation 2)
Rearrange Equation 1: (Equation 3)
Substitute Equation 3 into Equation 2:
Find :
Solution:
Substitution Method (Linear and Quadratic)
Solve system: (Equation 1) and (Equation 2)
Equate expressions:
Rearrange:
Apply quadratic formula:
Find corresponding values using Equation 1:
If ,
If ,
Solutions: or
Linear Programming
Line Boundary Rules: Strict inequalities () are represented by broken/dashed lines. Non-strict inequalities () are represented by solid lines.
Solution Procedure:
Convert inequalities into equality line equations
Draw straight lines on grid using appropriate boundary line styles.
Test points like to determine which side satisfies each inequality statement.
Shade out unwanted regions or shade wanted regions as instructed.
Unshaded enclosed boundary region represents the Feasible Region.
Functions
Domain: The set of all valid input values (-values).
Range: The set of all resulting output values (-values).
Inverse Principle: The domain of becomes the range of , and vice versa.
Steps to Find Inverse Function :
Replace with variable
Swap all and variables in expression.
Algebraically isolate
Replace with
Example: Find inverse of
Composite Functions: Notation means (apply first, then apply to the output).
Worked Example: Given and , find
Substitute into :
Simplify denominator:
Final Composite Function:
Motion Graphs
Distance-Time Graphs
Gradient: Represents Speed ().
Positive Gradient: Object moving away from starting point at uniform speed.
Zero Gradient (Horizontal): Object is stationary (at rest).
Negative Gradient: Object moving back towards starting point.
Speed-Time Graphs
Gradient: Represents Acceleration (). Negative gradient represents deceleration (retardation).
Area Under Graph: Represents Total Distance Travelled.
Worked Example Distance Calculation: Triangle section area ; Rectangle section area . Total distance .
Geometry
Similarity
Objects are similar if they possess identical corresponding angles and proportional side lengths.
Scale Factor (): Ratio of corresponding linear dimensions ().
Area Ratio:
Volume Ratio:
Worked Example 1 (Area): Length scale factor . If base area , then enlarged area
Worked Example 2 (Volume): Scale factor . If original volume , then reduced volume
Geometrical Terms
Congruent: Identical in shape and size.
Vertex: Point where two or more straight lines or edges intersect.
Perpendicular Bisector: Line passing through midpoint of a segment at a angle.
Parallel Lines: Lines staying equidistant apart that never meet.
Angles:
Acute Angle: Less than
Right Angle: Exactly
Obtuse Angle: Between and
Reflex Angle: Between and
Polygon Angles:
Sum of interior angles of -sided polygon
Exterior angles of any convex polygon sum to
Each exterior angle of regular polygon
Each interior angle of regular polygon
Congruence Rules for Triangles
SSS (Side-Side-Side): All three corresponding sides are equal.
SAS (Side-Angle-Side): Two sides and the included angle are equal.
ASA (Angle-Side-Angle): Two angles and the included side are equal.
RHS (Right-Hypotenuse-Side): Right angle, hypotenuse, and one other side are equal.
Triangle Classifications
Equilateral Triangle: All sides equal; all angles equal to ; lines of symmetry.
Isosceles Triangle: equal sides; base angles opposite equal sides are equal; line of symmetry.
Scalene Triangle: No sides or angles are equal; no lines of symmetry.
Right-Angled Triangle: Contains one angle; longest side is the hypotenuse.
Quadrilateral Properties & Symmetry Table
Shape | Lines of Symmetry | Order of Rotational Symmetry | Key Properties |
|---|---|---|---|
Square | All sides equal; all angles ; diagonals bisect at | ||
Rectangle | Opposite sides equal; all angles ; equal diagonals | ||
Parallelogram | Opposite sides parallel and equal; opposite angles equal | ||
Rhombus | Parallelogram with all sides equal; diagonals bisect at | ||
Trapezium | One pair of parallel sides (Isosceles trapezium has line) | ||
Kite | Adjacent sides equal; diagonals perpendicular; pair equal angles | ||
Regular Hexagon | All sides and angles equal |
Angle Relationships
Angles around a point sum to
Angles on a straight line sum to
Angles inside a triangle sum to
Vertically opposite angles are equal.
Corresponding angles are equal (-shape).
Alternate angles are equal (-shape).
Co-interior angles sum to (-shape).
Exterior angle of a triangle equals the sum of the two opposite interior angles.
Bearings
Measured clockwise from North line as a 3-digit figure ( to ).
Worked Calculation Example: Find bearing of point from point if anti-clockwise angle given as
Mensuration
2D Plane Figures
Parallelogram:
Triangle:
Rectangle:
Trapezium:
Circle:
Sector:
Kite:
3D Solid Geometry Formulas
Cuboid:
Cylinder:
Cone:
Sphere:
Hemisphere:
Square Pyramid:
Triangular Prism:
Units and Physical Conversions
Compound 3D Surface Area Worked Example
Consider a cuboid () with a cylindrical hole () extracted from top face.
Cuboid surface area without top hole:
Area of circular hole on top face:
Adjusted top surface area:
Curved Surface Area inside cylinder hole:
Bottom circular cap inside:
Total combined surface area:
Coordinate Geometry
Linear Graphs
Gradient Formula:
Forms of Equations of Straight Line:
Slope-Intercept Form:
General Form:
Intercept Form:
Midpoint Formula:
Distance Between Two Points:
Parallel and Perpendicular Lines
Parallel Lines: Share identical gradients () but different -intercepts.
Perpendicular Lines: Gradients are negative reciprocals ().
Worked Perpendicular Bisector Example: Find perpendicular bisector of line segment between and
Find Midpoint :
Find Gradient of :
Find Perpendicular Gradient:
Form line equation using through Midpoint :
Trigonometry
Right-Angled Triangles
Pythagoras' Theorem:
Trigonometric Ratios:
Area of Right Triangle:
Trigonometric Functions Symmetry Identities
Non-Right Triangle Rules
Sine Rule:
Cosine Rule for Sides:
Cosine Rule for Angles:
Area of Non-Right Triangle:
Solving Trigonometric Equations Worked Example
Solve for
Isolate trig ratio:
Find reference base angle ignoring negative sign:
Identify Quadrants using CAST diagram: Cosine is negative in Quadrant II and Quadrant III.
Calculate solutions:
Quadrant II:
Quadrant III:
Final Answer:
Vectors and Transformations
Vectors
Vector quantities possess both magnitude and direction.
Column Vector Format: where = horizontal displacement, = vertical displacement.
Magnitude Calculation:
Vector Operations:
Position Vector: Vector relative to origin . For points and ,
Gradient of Vector:
Geometric Transformations
Reflection
Reflection in -axis:
Reflection in -axis:
Reflection in line :
Reflection in line :
Rotation
anti-clockwise ( clockwise) about :
clockwise ( anti-clockwise) about :
rotation about :
Translation
Shift defined by vector :
Translation Vector Calculation:
Enlargement
Requires Scale Factor () and Centre of Enlargement.
Probability
Fundamentals
Probability ranges strictly between (impossible) and (certain).
Complementary Probability:
Event Combination Rules
Mutually Exclusive Events (OR Rule):
Non-Mutually Exclusive Events:
Independent Events (AND Rule):
Conditional Probability
Expected and Relative Frequency
Statistics
Histograms
Displays continuous grouped data where area of bar represents total frequency.
Measures of Central Tendency and Spread
Mean for Grouped Data:
Median Position: th value for odd sets; average of and th values for even sets.
Mode: Most frequently occurring value or modal class interval.
Range:
Interquartile Range (IQR): (Upper Quartile minus Lower Quartile).
Pie Charts
Total angle of circle equals