Chapter 9 - Muscles and Muscle Tissue
1. Types of Muscle Tissue
There are three types of muscle tissue:
Skeletal Muscle
Striated (striped appearance).
Multinucleated (many nuclei).
Voluntary control (you control the movement).
Moves the skeleton.
Example: Walking, running, lifting.
Cardiac Muscle
Striated.
Usually one nucleus.
Has intercalated discs (connect cardiac muscle cells).
Involuntary control (not controlled consciously).
Pumps blood through the heart.
Smooth Muscle
Nonstriated (no stripes).
One nucleus.
Involuntary control.
Moves substances through internal passageways.
Example: Digestive tract and blood vessels.
2. Basics of Skeletal Muscle Tissue
Properties of Muscle Tissue
1. Excitability
Ability to respond to a stimulus.
Example: Responding to a nerve signal.
2. Contractility
Ability to shorten and produce force.
Example: Lifting an object.
3. Extensibility
Ability to stretch without being damaged.
4. Elasticity
Ability to return to its original length after stretching or contracting.
Functions of Skeletal Muscle
Movement: Walking, running, and lifting.
Posture: Keeps your body upright.
Joint stabilization: Helps keep bones in place.
Heat production: Muscle contractions release heat and help maintain body temperature.
3. Structure and Organization of Skeletal Muscle
Skeletal muscle is organized from largest to smallest:
Muscle organization
Whole muscle
Surrounded by epimysium.Fascicle
A bundle of muscle fibers. Surrounded by perimysium.Muscle fiber (muscle cell)
One long muscle cell. Surrounded by endomysium.Myofibril
Long structures inside a muscle fiber.Sarcomere
Smallest contractile unit of skeletal muscle.Myofilaments
Thick (myosin) and thin (actin) filaments.
Connective Tissue Sheaths
Sheath | What it surrounds |
Epimysium | Entire muscle |
Perimysium | Fascicles (bundles of fibers) |
Endomysium | Individual muscle fibers |
All three connective tissue layers connect and continue into tendons.
Tendons attach muscles to bones.
Memory trick:
Epi = Entire muscle
Peri = Package of fibers
Endo = Each individual fiber
4. Skeletal Muscle Fibers (Muscle Cells)
Muscle fibers have special structures that help them contract.
Structure | Function |
Sarcolemma | Plasma membrane surrounding the muscle fiber |
Multiple nuclei | Control cell activities |
Mitochondria | Produce ATP (energy) |
Sarcoplasmic reticulum (SR) | Stores calcium (Ca²⁺) |
T-tubules | Carry electrical signals into the muscle fiber |
Myofibrils | Contain myofilaments responsible for contraction |
Important Terms
Sarco = Muscle.
Sarcolemma = Muscle cell membrane.
Sarcoplasm = Cytoplasm of a muscle cell.
Sarcoplasmic reticulum = Specialized smooth ER that stores calcium.
Triad
A triad has THREE parts:
One T-tubule.
Two terminal cisternae (enlarged parts of the SR).
Function: Helps carry electrical signals into the muscle fiber and release calcium to start contraction.
5. Myofibrils and Myofilaments
Myofibrils are made of smaller protein filaments called myofilaments.
There are two main types:
Thick Filaments – Myosin
Made of myosin proteins.
Have a tail and head.
Myosin heads attach to active sites on actin.
Pull thin filaments toward the center of the sarcomere.
Thin Filaments – Actin
Contains three proteins:
Protein | Function |
Actin | Contains active sites where myosin binds |
Tropomyosin | Covers actin’s active sites when the muscle is relaxed |
Troponin | Binds calcium and moves tropomyosin away from active sites |
Important: Calcium is needed to expose the active sites on actin so myosin can attach.
6. Sarcomere
The sarcomere is the smallest contractile unit of skeletal muscle.
Extends from one Z disc to another Z disc.
Contains thick and thin filaments.
Sarcomeres line up along myofibrils.
Their arrangement creates the striped appearance of skeletal muscle.
Parts of the Sarcomere
Structure | Function |
Z disc | Marks the boundaries of a sarcomere; anchors thin filaments |
M line | Middle of the sarcomere; anchors thick filaments |
I band | Contains thin filaments only |
A band | Covers the entire length of thick filaments, including overlap with thin filaments |
H zone | Contains thick filaments only |
Remember:
I band = Thin only.
H zone = Thick only.
A band = Entire length of thick filaments.
Z disc = End of sarcomere.
M line = Middle of sarcomere.
7. Sliding Filament Theory of Contraction
The sliding filament theory explains how muscles contract.
Main idea: Thin filaments slide past thick filaments toward the M line. The filaments themselves do NOT get shorter.
What happens during contraction?
Structure | What happens? |
I band | Gets shorter |
H zone | Gets shorter |
A band | Stays the same |
Z discs | Move closer together |
M line | Stays in the center |
Important exam concept:
Sarcomere shortens.
Thin filaments move toward the M line.
Thick and thin filaments do not shorten.
Z discs move closer together.
8. Skeletal Muscle Electrophysiology
Electrophysiology = How electrical signals affect muscle cells.
What is Membrane Potential?
The difference in electrical charge between the inside and outside of a cell membrane.
It happens because ions are not equally distributed across the membrane.
What Creates Membrane Potential?
Three important factors:
1. Different ion concentrations.
More Na⁺ (sodium) outside.
More K⁺ (potassium) inside.
2. Selective permeability.
The membrane controls which ions can enter and leave.
3. Movement of ions.
Moving charged ions changes the electrical charge.
Important Ions
Ion | Charge | Main location at rest |
Na⁺ (Sodium) | Positive (+) | Outside |
K⁺ (Potassium) | Positive (+) | Inside |
Ca²⁺ (Calcium) | Positive (+2) | Mostly stored in SR |
9. Ion Channels and Pumps
Ion Channels
Allow ions to move across the membrane.
Most ions cannot pass directly through the phospholipid bilayer.
Types of channels:
1. Leaky channels
Always open.
Allow ions to move through.
2. Gated channels
Open or close in response to a stimulus.
Three types:
Channel | Opens in response to |
Ligand-gated | Chemical binding (example: ACh) |
Voltage-gated | Change in membrane potential |
Mechanically gated | Physical pressure or stretching |
Important: Channels use facilitated diffusion (passive transport).
Ions move from high concentration to low concentration.
No ATP required.
Pumps – Active Transport
Move substances against their concentration gradient.
Low concentration → High concentration.
Require ATP.
Examples:
Na⁺/K⁺ pump.
Ca²⁺ pump.
Sodium-Potassium Pump (Na⁺/K⁺)
For every cycle:
3 Na⁺ move OUT.
2 K⁺ move IN.
Uses ATP.
Purpose:
Maintains high sodium outside the cell.
Maintains high potassium inside the cell.
Helps maintain the resting membrane potential.
10. Resting Membrane Potential (RMP)
The resting membrane potential is the electrical charge of a muscle fiber when it is not stimulated.
-90 mV
Resting membrane potential of skeletal muscle
Inside of the cell is more negative than outside.
Voltage-gated channels are closed at rest.
The Na⁺/K⁺ pump helps maintain ion concentrations.
Changes in Membrane Potential
Depolarization
Membrane becomes LESS negative (more positive).
Usually happens when Na⁺ enters the cell.
Example: -90 mV → -70 mV.
Repolarization
Membrane returns toward its resting potential.
Usually happens when K⁺ leaves the cell.
Example: -70 mV → -90 mV.
Memory trick:
Depolarization = More positive.
Repolarization = Returns to resting state.
11. Action Potentials
An action potential is a rapid, temporary change in membrane potential that travels along the muscle fiber membrane.
Steps
Resting: Muscle fiber is at -90 mV.
Depolarization: Voltage-gated Na⁺ channels open. Sodium enters the cell.
Repolarization: Na⁺ channels close and voltage-gated K⁺ channels open. Potassium leaves the cell.
Resting: Membrane returns toward -90 mV.
Important:
Na⁺ enters = Depolarization.
K⁺ leaves = Repolarization.
Action potentials are all-or-nothing.
12. Skeletal Muscle Contraction
There are four main stages:
Events at the neuromuscular junction.
Muscle fiber excitation.
Excitation-contraction coupling.
Cross-bridge cycling.
Neuromuscular Junction (NMJ)
The neuromuscular junction is where a motor neuron communicates with a skeletal muscle fiber.
Three main components:
Component | Function |
Motor neuron (axon terminal) | Releases acetylcholine (ACh) |
Synaptic cleft | Small space between neuron and muscle |
Motor end plate | Area of muscle membrane containing ACh receptors |
Important structures:
Voltage-gated Ca²⁺ channels on the motor neuron.
Synaptic vesicles containing ACh.
Chemically gated channels on the motor end plate.
Events at the NMJ
Action potential reaches the axon terminal.
Voltage-gated Ca²⁺ channels open.
Ca²⁺ enters the motor neuron.
Synaptic vesicles release ACh.
ACh crosses the synaptic cleft.
ACh binds to receptors on the motor end plate.
Chemically gated channels open.
Na⁺ enters the muscle fiber.
The motor end plate depolarizes.
End-Plate Potential vs. Action Potential
End-Plate Potential (EPP)
Local depolarization of the motor end plate.
Caused by ACh binding to receptors.
Not an action potential.
Can trigger an action potential if threshold is reached.
Action Potential (AP)
Happens when the membrane reaches threshold.
All-or-nothing response.
Travels along the sarcolemma and T-tubules.
Initiates muscle contraction.
Remember: EPP comes FIRST, then the action potential.
13. Excitation-Contraction Coupling
Excitation-contraction coupling connects the electrical signal to muscle contraction.
Steps
ACh creates an end-plate potential.
The membrane reaches threshold (approximately -65 mV).
Voltage-gated Na⁺ channels open.
Na⁺ enters, causing depolarization.
An action potential travels along the sarcolemma.
The action potential travels down the T-tubules.
The signal causes calcium channels in the SR system to release Ca²⁺.
Ca²⁺ enters the cytosol.
Calcium binds to troponin.
Tropomyosin moves away from actin’s active sites.
Myosin can now bind to actin.
Main idea: The action potential causes calcium release, and calcium allows muscle contraction to happen.
14. Cross-Bridge Cycling
Cross-bridge cycling is the process that allows myosin to pull actin and shorten the sarcomere.
Five Steps
1. Calcium binds to troponin.
Troponin changes shape.
Tropomyosin moves away from actin’s active sites.
2. Cross-bridge formation.
Myosin head attaches to actin.
3. Power stroke.
Myosin pulls actin toward the M line.
ADP and phosphate (Pi) are released.
4. Cross-bridge detachment.
ATP attaches to myosin.
Myosin releases actin.
5. Cocking of myosin head.
ATP breaks down into ADP + Pi.
Energy resets the myosin head.
Myosin is ready to bind again.
Remember: Two things are needed for contraction
Calcium (Ca²⁺) exposes actin’s active sites.
ATP provides energy and allows myosin to detach and reset.
15. Skeletal Muscle Relaxation
Muscle relaxation happens when stimulation stops.
Steps
Motor neuron stops sending action potentials.
ACh release stops.
ACh is broken down by acetylcholinesterase (AChE).
Chemically gated channels close.
The muscle fiber repolarizes and returns toward RMP.
Calcium release from the SR stops.
Ca²⁺ pumps move calcium back into the SR using ATP.
Calcium leaves troponin.
Tropomyosin covers actin’s active sites again.
Cross-bridge cycling stops, allowing the muscle to relax.
Important: Calcium pumps require ATP.
16. Rigor Mortis
Rigor mortis = Stiffening of muscles after death.
ATP production stops.
Calcium pumps cannot move calcium back into the SR.
Calcium stays in the cytosol.
Myosin attaches to actin.
Without ATP, myosin cannot detach from actin.
Muscles remain stiff until muscle proteins begin breaking down.
Remember: No ATP = Myosin cannot detach = Muscle stays stiff.
17. ATP Generation
ATP is needed for:
Na⁺/K⁺ pumps.
Myosin to detach from actin.
Resetting (cocking) myosin heads.
Ca²⁺ pumps to move calcium back into the SR.
There are three ways muscles produce ATP.
A. Direct Phosphorylation
Fastest way to make ATP.
Uses creatine phosphate.
Occurs in the cytosol.
Provides energy for approximately 15 seconds.
Process:
Creatine phosphate donates a phosphate to ADP → ATP.
B. Anaerobic Pathway
Does NOT require oxygen.
Uses glycolysis to break down glucose.
Occurs in the cytosol.
Produces a net gain of 2 ATP per glucose.
Produces pyruvate, which can be converted to lactate.
Provides ATP quickly for short periods.
C. Aerobic Pathway
Requires oxygen.
Begins with glycolysis in the cytosol.
Pyruvate enters the mitochondria.
Produces much more ATP (about 30–32 ATP per glucose, depending on the source).
Produces CO₂ and H₂O.
Can use glucose, fatty acids, and some amino acids.
Provides sustained ATP during longer activities.
Comparison of ATP Pathways
Feature | Direct Phosphorylation | Anaerobic | Aerobic |
Oxygen | No | No | Yes |
Location | Cytosol | Cytosol | Cytosol + mitochondria |
ATP | Very small amount | 2 ATP | About 30–32 ATP |
Speed | Fastest | Fast | Slower |
Duration | Very short | Short | Long |
Memory trick:
Direct = Fastest.
Anaerobic = No oxygen.
Aerobic = Uses oxygen and produces the most ATP.
18. Force of Muscle Contraction
Force of contraction = Strength of a muscle contraction.
Example:
Picking up a phone requires less force.
Picking up a heavy backpack requires more force.
Three main factors influence muscle force:
Muscle fiber type.
Motor unit recruitment.
Frequency of stimulation.
A. Frequency of Stimulation
Frequency = How often a muscle receives stimulation.
Low frequency = More time for muscle to relax.
High frequency = Less time for muscle to relax.
Higher frequency = More force.
Temporal Summation
Repeated stimulation causes contractions to build on one another.
The muscle has less time to relax.
Produces more force.
Types of Tetanus
Unfused Tetanus
Muscle partially relaxes between contractions.
Repeated contractions overlap.
Fused Tetanus
Muscle does not relax between contractions.
Produces a sustained, smooth, strong contraction.
Remember:
Unfused = Partial relaxation.
Fused = No relaxation.
B. Motor Unit Recruitment
A motor unit = One motor neuron and all the muscle fibers it controls.
All muscle fibers in a motor unit contract together.
Recruiting more motor units increases muscle force.
Small Motor Units
Fewer muscle fibers per motor neuron.
Allow precise movements.
Examples: Eyes and fingers.
Large Motor Units
More muscle fibers per motor neuron.
Produce stronger movements.
Examples: Large leg muscles.
Important: More motor units recruited = More force.
19. Types of Skeletal Muscle Fibers
There are three main types of skeletal muscle fibers.
They are classified by:
Speed of contraction.
Energy source.
Fatigue resistance.
Amount of myoglobin.
Number of mitochondria.
Blood supply.
A. Slow Oxidative (Type I)
Slow contraction.
Produce less force.
Very fatigue resistant.
Use aerobic metabolism.
High myoglobin.
Many mitochondria.
Good blood supply.
Example: Postural muscles that help keep you standing.
B. Fast Oxidative (Type IIa)
Fast contraction.
Moderate force.
Intermediate fatigue resistance.
Use both aerobic and anaerobic pathways.
Moderate myoglobin.
Moderate mitochondria.
Moderate blood supply.
Examples: Walking and jogging.
C. Fast Glycolytic (Type IIx)
Fast contraction.
Produce powerful contractions.
Fatigue quickly.
Mainly use anaerobic glycolysis.
Low myoglobin.
Fewer mitochondria.
Poor blood supply.
Examples: Sprinting and heavy weightlifting.
Muscle Fiber Comparison
Feature | Slow Oxidative | Fast Oxidative | Fast Glycolytic |
Speed | Slow | Fast | Fast |
Force | Lower | Intermediate | High |
Fatigue | Resistant | Moderate | Quickly |
Energy | Aerobic | Both | Anaerobic |
Myoglobin | High | Moderate | Low |
Mitochondria | Many | Moderate | Few |
Blood supply | Good | Moderate | Poor |
Memory trick:
Slow oxidative = Endurance.
Fast oxidative = Combination.
Fast glycolytic = Power and speed.
20. Important Exam Review
These are the concepts I would make sure you understand before your exam.
Must-know facts
Muscle structure
Epimysium = Entire muscle.
Perimysium = Fascicle.
Endomysium = Muscle fiber.
Sarcomere = Smallest contractile unit.
Sarcomere contraction
I band gets shorter.
H zone gets shorter.
A band stays the same.
Z discs move closer together.
Electrical signals
RMP = -90 mV.
Depolarization = Na⁺ enters.
Repolarization = K⁺ leaves.
Action potential = All-or-nothing.
Muscle contraction
ACh starts the signal at the NMJ.
Calcium binds to troponin.
Tropomyosin moves away.
Myosin attaches to actin.
ATP allows myosin to detach.
Muscle relaxation
Calcium is pumped back into the SR.
Requires ATP.
Tropomyosin covers actin’s active sites again.
ATP
Direct phosphorylation = Fastest.
Anaerobic = No oxygen, 2 ATP.
Aerobic = Oxygen, about 30–32 ATP.
Muscle force
More motor units = More force.
Higher stimulation frequency = More force.
Fused tetanus = No relaxation.
Unfused tetanus = Partial relaxation.