Alkenes: Structure, Nomenclature, Stability, and Physical Properties

Introduction to Alkenes and the Carbon-Carbon Double Bond

  • Definition and Classification:

    • Alkenes are hydrocarbons containing at least one carbon-carbon double bond (C=C\text{C}=\text{C}).
    • Historically referred to as olefins, derived from the French term gaz oléfiant, which translates to "oil-forming gas." This name stems from the oily liquid appearance observed when gaseous ethylene reacts with halogens like chlorine.
    • General molecular formula for an acyclic mono-alkene: CnH2n\text{C}_n\text{H}_{2n}.
  • Bond Composition and Thermodynamics:

    • A carbon-carbon double bond consists of one strong sigma (σ\sigma) bond and one weaker pi (π\pi) bond.
    • Double Bond Dissociation Energy (B.D.E.): 146 kcal/mol146\,\text{kcal/mol}.
    • σ\sigma Bond Dissociation Energy (B.D.E.): 83 kcal/mol83\,\text{kcal/mol}.
    • π\pi Bond Dissociation Energy (B.D.E.): Calculated by subtracting the σ\sigma bond energy from the total double bond energy:     146 kcal/mol−83 kcal/mol=63 kcal/mol146\,\text{kcal/mol} - 83\,\text{kcal/mol} = 63\,\text{kcal/mol}
    • Because a π\pi bond is substantially weaker (63 kcal/mol63\,\text{kcal/mol} vs. 83 kcal/mol83\,\text{kcal/mol}), it is significantly more reactive than a σ\sigma bond.
    • The π\pi bond functions as the primary reactive site and is classified as a distinct functional group responsible for characteristic addition reactions.

Orbital Structure and Bonding Geometry of Alkenes

  • Hybridization and Geometry:
    • Each carbon participating in a double bond is bonded to three other atoms and possesses zero nonbonding electron pairs, resulting in sp2sp^2 hybridization.
    • The molecular geometry around each double-bonded carbon is trigonal planar, with ideal bond angles of approximately 120∘120^\circ.
    • The C−H\text{C}-\text{H} σ\sigma bonds in ethene (ethylene) are formed by the end-on overlap of an sp2sp^2 hybrid orbital from carbon with the spherical 1s1s orbital from hydrogen.
    • The carbon-carbon σ\sigma bond forms via end-to-end overlap between an sp2sp^2 hybrid orbital from each carbon atom.

sigma bonding orbitals of ethylene and unhybridized p orbitals

  • Comparison of Orbital Character, Bond Lengths, and Bond Angles:
    • C−H\text{C}-\text{H} Bonds:
    • In ethene, the carbon utilizes an sp2sp^2 orbital (containing 33.3%33.3\% ss character), whereas in ethane, the carbon utilizes an sp3sp^3 orbital (containing 25%25\% ss character).
    • Greater ss character holds bonding electrons closer to the carbon nucleus, making the ethene C−H\text{C}-\text{H} bond shorter (1.08 A˚1.08\,\text{Å}) and stronger than the ethane C−H\text{C}-\text{H} bond (1.09 A˚1.09\,\text{Å}).
    • C−C\text{C}-\text{C} Bonds:
    • Side-by-side π\pi overlap pulls the atomic nuclei closer together.
    • The C=C\text{C}=\text{C} double bond length in ethylene is 1.33 A˚1.33\,\text{Å}, compared to 1.54 A˚1.54\,\text{Å} for the C−C\text{C}-\text{C} single bond in ethane.
    • Angles in Ethylene:
    • The H−C=C\text{H}-\text{C}=\text{C} bond angle is 121.7∘121.7^\circ.
    • The H−C−H\text{H}-\text{C}-\text{H} bond angle is compressed slightly to 116.6∘116.6^\circ due to the greater electron density repulsion of the double bond.

bond lengths and angles for ethylene versus ethane

  • Pi (π\pi) Bonding and Rotational Barrier:
    • Each sp2sp^2 carbon retains one unhybridized pp orbital containing a single electron, oriented perpendicular to the trigonal planar σ\sigma-bonding framework.
    • Side-by-side (parallel) overlap of these two unhybridized pp orbitals produces the π\pi bond.
    • The resulting π\pi electron density is divided equally, with one lobe located directly above the σ\sigma-bond axis and the other lobe located directly below it.
    • A nodal plane exists along the molecular plane of the carbon and hydrogen nuclei, where the probability of finding a π\pi electron is zero.

pi bond orbital overlap and electrostatic potential map of ethylene

  • Rigidity of the Double Bond:
    • Free rotation around a carbon-carbon double bond is impossible under ordinary conditions because rotating one end by 90∘90^\circ forces the unhybridized pp orbitals into an orthogonal, non-overlapping orientation, entirely breaking the π\pi bond.
    • The rotational barrier of an alkene double bond corresponds to the strength of the π\pi bond: approximately 264 kJ/mol264\,\text{kJ/mol} (63 kcal/mol63\,\text{kcal/mol}).
    • This high activation barrier prevents thermal rotation at room temperature, locking substituents into fixed spatial geometries.

inability of pi bond to rotate without breaking p-orbital overlap

Degree of Unsaturation (Index of Hydrogen Deficiency)

  • Fundamental Principles of Saturation:
    • A hydrocarbon is considered saturated when it contains the maximum theoretical number of hydrogen atoms for its carbon count (conforming to the alkane formula CnH2n+2\text{C}_n\text{H}_{2n+2}).
    • An element of unsaturation (also known as the degree of unsaturation, DoU, or Index of Hydrogen Deficiency, IHD) represents a structural feature that decreases the hydrogen count by two relative to the saturated alkane.
    • Every π\pi bond (whether part of a double or triple bond) counts as an element of unsaturation.
    • Every independent ring system closes a carbon loop and removes two hydrogens, counting as one element of unsaturation.
    • Relationship across basic hydrocarbon classes:
    • Alkane (CnH2n+2\text{C}_n\text{H}_{2n+2}): Saturated (DoU=0\text{DoU} = 0), e.g., Propane (C3H8\text{C}_3\text{H}_8).
    • Alkene (CnH2n\text{C}_n\text{H}_{2n}): One element of unsaturation (DoU=1\text{DoU} = 1), e.g., Propene (C3H6\text{C}_3\text{H}_6).
    • Cycloalkane (CnH2n\text{C}_n\text{H}_{2n}): One element of unsaturation (DoU=1\text{DoU} = 1), e.g., Cyclopropane (C3H6\text{C}_3\text{H}_6).
    • Alkyne (CnH2n−2\text{C}_n\text{H}_{2n-2}): Two elements of unsaturation (DoU=2\text{DoU} = 2), e.g., Propyne (C3H4\text{C}_3\text{H}_4).

hydrocarbon saturation and degrees of unsaturation

  • Calculation for Pure Hydrocarbons:

    • For molecules containing only carbon and hydrogen:     DoU=2C+2−H2\text{DoU} = \frac{2C + 2 - H}{2}
    • The calculated value provides the total combined number of π\pi bonds and rings, but cannot distinguish between multiple bonds and cyclic structures without further chemical or spectroscopic evidence.
    • Worked Example for C5H8\text{C}_5\text{H}_8:DoU=2(5)+2−82=12−82=2\text{DoU} = \frac{2(5) + 2 - 8}{2} = \frac{12 - 8}{2} = 2
    • Structural possibilities for DoU=2\text{DoU} = 2 include: two double bonds, one triple bond, two rings, or one double bond combined with one ring.
  • Rules for Heteroatoms:

    • Halogens (X=F, Cl, Br, IX = \text{F, Cl, Br, I}): Halogens are monovalent and substitute directly for hydrogen atoms in the hydrocarbon skeleton. Treat each halogen atom as equivalent to one hydrogen atom (+1 H+1\,H). For example, C2H4F2\text{C}_2\text{H}_4\text{F}_2 is saturated (DoU=0\text{DoU} = 0), exactly like C2H6\text{C}_2\text{H}_6.
    • Oxygen (O\text{O}): Oxygen is divalent. Inserting an oxygen atom into a C−C\text{C}-\text{C} or C−H\text{C}-\text{H} bond creates ethers (CH3−O−CH3\text{CH}_3-\text{O}-\text{CH}_3) or alcohols (CH3CH2−OH\text{CH}_3\text{CH}_2-\text{OH}) without changing the required carbon-to-hydrogen ratio. Ignore oxygen completely when calculating the degree of unsaturation.
    • Nitrogen (N\text{N}): Nitrogen is trivalent. When nitrogen is incorporated into a carbon chain, it bonds to one hydrogen (−NH−-\text{NH}-), whereas a carbon in the same chain position bonds to two hydrogens (−CH2−-\text{CH}_2-). Nitrogen effectively counts as half a carbon, meaning it adds one hydrogen capacity to the saturated baseline. Therefore, add the number of nitrogen atoms to the formula numerator.

comparison of valence bonding for carbon versus nitrogen in chains

  • Generalized Master Formula for Degree of Unsaturation:DoU=2C+2+N−X−H2\text{DoU} = \frac{2C + 2 + N - X - H}{2}

    • Where CC is the number of carbons, NN is the number of nitrogens, XX is the total number of halogens, and HH is the number of hydrogens.
  • Worked Examples:

    • Calculation for C4H7Br\text{C}_4\text{H}_7\text{Br}:DoU=2(4)+2+0−1−72=8+2−1−72=22=1\text{DoU} = \frac{2(4) + 2 + 0 - 1 - 7}{2} = \frac{8 + 2 - 1 - 7}{2} = \frac{2}{2} = 1
    • Result: 1 element of unsaturation (one ring or one double bond).
    • Calculation for C6H7N\text{C}_6\text{H}_7\text{N}:DoU=2(6)+2+1−0−72=12+2+1−72=82=4\text{DoU} = \frac{2(6) + 2 + 1 - 0 - 7}{2} = \frac{12 + 2 + 1 - 7}{2} = \frac{8}{2} = 4
    • Result: 4 elements of unsaturation (characteristic of a benzene ring containing three π\pi bonds and one ring).

IUPAC Nomenclature of Alkenes

  • Primary Rules for Acyclic Alkenes:

    • Parent Chain Selection: Identify the longest continuous chain of carbon atoms that contains both carbons of the double bond. This determines the root alkane name.
    • Suffix Modification: Replace the alkane suffix -ane with the alkene suffix -ene.
    • Chain Numbering Priority: Number the continuous carbon chain beginning at the end closest to the double bond, ensuring the double-bonded carbons receive the lowest possible locants.
    • Locant Placement: Indicate the position of the double bond by the lower-numbered carbon atom involved in the bond.
    • Old IUPAC convention: The locant precedes the root name (e.g., 1-butene, 2-pentene).
    • Current IUPAC convention: The locant is placed directly before the suffix -ene (e.g., but-1-ene, pent-2-ene).
  • Standard IUPAC vs. Common Names:

    • CH2=CH2\text{CH}_2=\text{CH}_2: IUPAC: ethene; Common: ethylene.
    • CH2=CH−CH3\text{CH}_2=\text{CH}-\text{CH}_3: IUPAC: propene; Common: propylene.
    • CH2=C(CH3)2\text{CH}_2=\text{C}(\text{CH}_3)_2: IUPAC: 2-methylpropene; Common: isobutylene.
  • Numbering Branches and Substituents:

    • The double bond takes priority over alkyl and halogen substituents when determining the direction of numbering.
    • Examples:
    • CH3−CH=C(CH3)−CH3\text{CH}_3-\text{CH}=\text{C}(\text{CH}_3)-\text{CH}_3: numbered from right to left to give the alkene carbon 2; named 2-methyl-2-butene (or 2-methylbut-2-ene).
    • CH3−CH(CH3)−CH=CH2\text{CH}_3-\text{CH}(\text{CH}_3)-\text{CH}=\text{CH}_2: numbered from right to left to give the alkene carbon 1; named 3-methyl-1-butene (or 3-methylbut-1-ene).
    • CH3−CH=C(CH3)−CH2−CH2−CH(CH3)−CH3\text{CH}_3-\text{CH}=\text{C}(\text{CH}_3)-\text{CH}_2-\text{CH}_2-\text{CH}(\text{CH}_3)-\text{CH}_3: numbered from left to right; named 3,6-dimethyl-2-heptene (or 3,6-dimethylhept-2-ene).
    • CH2=CH−CH(CH2CH2CH3)−CH2−CH2−CH2−CH3\text{CH}_2=\text{CH}-\text{CH}(\text{CH}_2\text{CH}_2\text{CH}_3)-\text{CH}_2-\text{CH}_2-\text{CH}_2-\text{CH}_3: parent chain is 7 carbons long; named 3-propyl-1-heptene (or 3-propylhept-1-ene).
  • Nomenclature of Cycloalkenes:

    • In a ring containing a single double bond, the double-bonded carbons are assigned carbon numbers 1 and 2 by definition.
    • The ring is numbered through the double bond in the direction that assigns the lowest possible locants to any attached substituents at the first point of difference.
    • The locant "1" for the double bond is omitted in simple cycloalkenes containing only one double bond (e.g., cyclohexene, cyclopentene).
    • Examples with substituents:
    • A cyclopentene ring with a methyl group on an alkene carbon is named 1-methylcyclopentene.
    • A cyclopentene ring with a methyl group adjacent to the double bond is numbered through the double bond toward the substituent (C1=C2−C3(CH3)\text{C}1=\text{C}2-\text{C}3(\text{CH}_3)) and named 3-methylcyclopentene.
  • Molecules with Multiple Double Bonds (Polyenes):

    • Compounds containing two double bonds are named dienes, three double bonds are trienes, four double bonds are tetraenes, etc.
    • Use numerical prefixes (di-, tri-, tetra-) preceding the -ene ending, retaining the connecting letter "a" on the alkane root (e.g., butadiene, heptatriene).
    • Number the chain from the end that yields the lowest set of locants for all double bonds.
    • Examples:
    • CH2=CH−CH=CH2\text{CH}_2=\text{CH}-\text{CH}=\text{CH}_2: 1,3-butadiene (or buta-1,3-diene).
    • CH3−CH=CH−CH=CH−CH=CH2\text{CH}_3-\text{CH}=\text{CH}-\text{CH}=\text{CH}-\text{CH}=\text{CH}_2: 1,3,5-heptatriene (or hepta-1,3,5-triene).
    • Eight-membered ring with four alternating double bonds: 1,3,5,7-cyclooctatetraene (or cycloocta-1,3,5,7-tetraene).
    • Six-membered ring with two double bonds and an ethyl group: 2-ethyl-1,3-cyclohexadiene (or 2-ethylcyclohexa-1,3-diene).
    • Seven-membered ring with three double bonds and a bromine atom: 7-bromo-1,3,5-cycloheptatriene (or 7-bromocyclohepta-1,3,5-triene).
  • Alkenyl Groups as Substituents:

    • When an alkene unit is attached to a larger parent chain or ring, it is designated as an alkenyl group.
    • Common Alkenyl Groups:
    • Methylene group: =CH2=\text{CH}_2 (a double-bonded one-carbon branch attached to a ring or chain).
    • Vinyl group: −CH=CH2-\text{CH}=\text{CH}_2 (ethenyl group).
    • Allyl group: −CH2−CH=CH2-\text{CH}_2-\text{CH}=\text{CH}_2 (prop-2-en-1-yl group).

alkenyl substituent groups: methylene, vinyl, and allyl

  • Systematic applications:
    • A cyclohexene ring with a methylene group at position 3: 3-methylenecyclohexene.
    • A 1,5-hexadiene chain bearing a vinyl group at carbon 3: 3-vinyl-1,5-hexadiene (or 3-vinylhexa-1,5-diene).

Stereoisomerism: Cis-Trans and (E)-(Z) Systems

  • Conformational vs. Configurational Isomerism:
    • Conformational isomers (conformers): Differ only by rotation around single σ\sigma bonds (e.g., eclipsed and staggered ethane). They readily interconvert at room temperature and cannot be isolated or separated.
    • Configurational isomers: Differ in the spatial arrangement of atoms and can only interconvert by breaking covalent bonds. They represent distinct chemical species and can be physically separated.

conformational isomers versus stable states

  • Cis-Trans (Geometric) Isomerism in Alkenes:

    • Because the π\pi bond prevents rotation, disubstituted alkenes can exist as stereoisomers.
    • Cis Isomer: Identical or similar groups (or hydrogen atoms) are situated on the same side of the double bond.
    • Trans Isomer: Identical or similar groups (or hydrogen atoms) are situated on opposite sides of the double bond.
    • Structural Requirement for Cis-Trans Isomerism: Each individual carbon atom of the double bond must be bonded to two non-identical groups (ABC=CDE\text{A}\text{B}\text{C}=\text{C}\text{D}\text{E}, where A≠B\text{A} \neq \text{B} and C≠D\text{C} \neq \text{D}).
    • Absence of Isomerism: If either double-bonded carbon possesses two identical substituents (e.g., two hydrogens, or two methyl groups), cis-trans isomerism is impossible (e.g., propene, 1-butene, 2-methyl-2-pentene).
  • Polarity, Dipole Moments, and Physical Properties:

    • Carbon atoms with sp2sp^2 hybridization are more electronegative than sp3sp^3 hybridized carbons, drawing electron density inward toward the double bond via inductive polarization.
    • Alkyl groups donate electron density toward the π\pi system, generating a small bond dipole along the vinylic C−C\text{C}-\text{C} bond.
    • Cis Isomers: Bond dipoles point in the same general direction and sum constructively, producing a net molecular dipole moment (μ>0\mu > 0). This polarity enhances dipole-dipole attractions, resulting in a higher boiling point.
    • Trans Isomers: Bond dipoles are oriented in opposite directions, canceling out completely (μ=0\mu = 0) in symmetrically substituted alkenes. This leads to weaker intermolecular forces and a lower boiling point.
    • Physical Property Comparisons:
    • Propene: μ=0.35 D\mu = 0.35\,\text{D}.
    • cis-But-2-ene: μ=0.33 D\mu = 0.33\,\text{D}; boiling point = 3.7 ∘C3.7\,^\circ\text{C} (or 4 ∘C4\,^\circ\text{C}).
    • trans-But-2-ene: μ=0 D\mu = 0\,\text{D}; boiling point = 0.9 ∘C0.9\,^\circ\text{C} (or 1 ∘C1\,^\circ\text{C}).
    • cis-1,2-Dichloroethene: μ=2.95 D\mu = 2.95\,\text{D}; boiling point = 60.3 ∘C60.3\,^\circ\text{C}.
    • trans-1,2-Dichloroethene: μ=0 D\mu = 0\,\text{D}; boiling point = 47.5 ∘C47.5\,^\circ\text{C}.

dipole moments and boiling points of cis and trans isomers

  • The Cahn-Ingold-Prelog (E)-(Z) System:

    • When an alkene is tri- or tetrasubstituted, or when substituents on opposite carbons are completely different, cis/trans terminology becomes ambiguous or impossible to apply.
    • The unambiguous (E)-(Z) system assigns formal priorities to the two groups attached to each double-bonded carbon using the Cahn-Ingold-Prelog (CIP) priority rules.
    • (Z) Isomer (zusammen = "together"): The two groups of highest priority are situated on the same side of the double bond.
    • (E) Isomer (entgegen = "opposite"): The two groups of highest priority are situated on opposite sides of the double bond.
  • Cahn-Ingold-Prelog (CIP) Priority Rules:

    1. Atomic Number Priority: Compare the atoms directly attached to an sp2sp^2 carbon. The atom with the higher atomic number receives higher priority (I>Br>Cl>S>F>O>N>C>H\text{I} > \text{Br} > \text{Cl} > \text{S} > \text{F} > \text{O} > \text{N} > \text{C} > \text{H}). Hydrogen has the lowest possible priority (Z=1Z = 1).
    2. Isotopic Priority: If two directly attached atoms are isotopes of the same element, the isotope with the higher atomic mass receives priority (2H^2\text{H} or Deuterium, D>1H\text{D} > ^1\text{H}).
    3. Tie-Breaking Along the Chain: If the directly attached atoms are identical (a tie), compare the atomic numbers of the atoms bonded to each tied atom, listing them in descending order of atomic number. Continue along the substituent chain atom by atom until the first point of difference is reached.
    4. Multiple Bonds: Multiple bonds are treated as equivalent to that same number of single bonds to separate virtual ("phantom") atoms:
    • A double bond −CH=CH2-\text{CH}=\text{CH}_2 is expanded such that the carbon is treated as bonded to (C, C, H).
    • A triple bond −C≡CH-\text{C}\equiv\text{CH} is expanded such that the carbon is treated as bonded to (C, C, C).
    • A carbonyl group −CH=O-\text{CH}=\text{O} is expanded such that the carbon is treated as bonded to (O, O, H).
    • Priority ranking example among multiple-bonded carbons: −CH=C(CH3)2<−C≡C−CH3<−CH=O-\text{CH}=\text{C}(\text{CH}_3)_2 < -\text{C}\equiv\text{C}-\text{CH}_3 < -\text{CH}=\text{O}.

cahn-ingold-prelog treatment of multiple bonds as replicated single bonds

  • Worked Examples of (E)-(Z) Assignment:
    • Example 1: 1-bromo-1-chloropropene
    • Carbon 1 is bonded to Br\text{Br} (Z=35Z = 35) and Cl\text{Cl} (Z=17Z = 17); Br\text{Br} is priority 1, Cl\text{Cl} is priority 2.
    • Carbon 2 is bonded to CH3\text{CH}_3 (Z=6Z = 6 for carbon) and H\text{H} (Z=1Z = 1); CH3\text{CH}_3 is priority 1, H\text{H} is priority 2.
    • If Br\text{Br} and CH3\text{CH}_3 are on opposite sides, the compound is (E)-1-bromo-1-chloropropene.
    • Example 2: 3-methylpent-2-ene
    • Longest carbon chain is 5 carbons (pent-2-ene).
    • On carbon 2: CH3\text{CH}_3 (priority 1) vs. H\text{H} (priority 2).
    • On carbon 3: CH2CH3\text{CH}_2\text{CH}_3 (C attached to C, H, H; priority 1) vs. CH3\text{CH}_3 (C attached to H, H, H; priority 2).
    • When CH3\text{CH}_3 on C2 and CH2CH3\text{CH}_2\text{CH}_3 on C3 are on opposite sides, the molecule is (E)-3-methylpent-2-ene.
    • Example 3: Alkene bearing an isopropyl and a hydroxymethyl group
    • Consider −CH(CH3)2-\text{CH}(\text{CH}_3)_2 vs. −CH2OH-\text{CH}_2\text{OH}.
    • The central carbon in −CH(CH3)2-\text{CH}(\text{CH}_3)_2 is bonded to (C, C, H).
    • The central carbon in −CH2OH-\text{CH}_2\text{OH} is bonded to (O, H, H).
    • Comparing the highest atomic number atoms attached to each: Oxygen (Z=8Z = 8) takes precedence over Carbon (Z=6Z = 6). Therefore, −CH2OH-\text{CH}_2\text{OH} receives higher priority than −CH(CH3)2-\text{CH}(\text{CH}_3)_2.
    • Stereochemistry in Polyenes and Exocyclic Systems:
    • Each double bond capable of stereoisomerism is independently assigned and specified by locant in the IUPAC prefix: e.g., (3Z,5E)-3-bromoocta-3,5-diene.
    • Exocyclic double bonds can also exhibit (E)-(Z) isomerism, as in (E)- and (Z)-2-(butan-2-ylidene)cyclohexanone.

Alkene Stability and Heats of Hydrogenation

  • Hydrogenation Reactions and Measuring Thermodynamic Stability:
    • Alkenes undergo catalytic hydrogenation to form saturated alkanes in the presence of hydrogen gas (H2\text{H}_2) and a finely divided transition metal catalyst (such as Pt\text{Pt}, Pd\text{Pd}, or Ni\text{Ni}):     Alkene+H2→PtAlkane+Heat\text{Alkene} + \text{H}_2 \xrightarrow{\text{Pt}} \text{Alkane} + \text{Heat}
    • This reaction is strongly exothermic. The amount of heat released under standard conditions is defined as the heat of hydrogenation (ΔHhydro∘\Delta H^\circ_\text{hydro}).
    • Hydrogenation of isomeric alkenes produces identical alkane products. Consequently, differences in ΔHhydro∘\Delta H^\circ_\text{hydro} directly mirror differences in the starting thermodynamic potential energy of the alkene isomers.
    • A lower heat of hydrogenation (less negative / smaller magnitude of energy released) indicates that the starting alkene is at a lower energy level and is therefore more thermodynamically stable.
    • Comparison of Butene Isomers:
    • But-1-ene (monosubstituted): ΔHhydro∘=−125.9 kJ/mol\Delta H^\circ_\text{hydro} = -125.9\,\text{kJ/mol} (−30.1 kcal/mol-30.1\,\text{kcal/mol}).
    • trans-But-2-ene (disubstituted): ΔHhydro∘=−114.6 kJ/mol\Delta H^\circ_\text{hydro} = -114.6\,\text{kJ/mol} (−27.4 kcal/mol-27.4\,\text{kcal/mol}).
    • Difference: trans-But-2-ene is more stable by 11.3 kJ/mol11.3\,\text{kJ/mol} (2.7 kcal/mol2.7\,\text{kcal/mol}).

energy diagram comparing heats of hydrogenation of but-1-ene and trans-but-2-ene

  • Factors Explaining Alkene Stabilization by Alkyl Substituents:
    • Hyperconjugation: Alkyl groups donate electron density from adjacent C−H\text{C}-\text{H} or C−C\text{C}-\text{C} σ\sigma bonds into the empty π∗\pi^* antibonding orbital of the double bond, stabilizing the π\pi electron cloud.
    • Steric Relief through Bond Angles: An sp2sp^2 hybridized carbon has bond angles of 120∘120^\circ, whereas an sp3sp^3 carbon has bond angles of 109.5∘109.5^\circ. Placing bulky alkyl groups on an sp2sp^2 carbon spreads them farther apart in space, significantly decreasing nonbonded steric interactions.

steric compression in sp3 carbons compared to sp2 carbons

  • Quantitative Ladder of Alkene Stability (Relative to Ethylene):
    • Increasing alkyl substitution on the double-bonded carbons increases thermodynamic stability:     Tetrasubstituted>Trisubstituted>Disubstituted>Monosubstituted>Ethylene (unsubstituted)\text{Tetrasubstituted} > \text{Trisubstituted} > \text{Disubstituted} > \text{Monosubstituted} > \text{Ethylene (unsubstituted)}
    • Stabilization energy relative to ethylene:
    • Ethylene (CH2=CH2\text{CH}_2=\text{CH}_2): Baseline (0 kJ/mol0\,\text{kJ/mol}, least stable).
    • Monosubstituted (R−CH=CH2\text{R}-\text{CH}=\text{CH}_2): 11 kJ/mol11\,\text{kJ/mol} (2.7 kcal/mol2.7\,\text{kcal/mol}) more stable.
    • Disubstituted cis (R−CH=CH−R\text{R}-\text{CH}=\text{CH}-\text{R}): 18 kJ/mol18\,\text{kJ/mol} (4.2 kcal/mol4.2\,\text{kcal/mol}) more stable.
    • Disubstituted geminal (R2C=CH2\text{R}_2\text{C}=\text{CH}_2): 19 kJ/mol19\,\text{kJ/mol} (4.5 kcal/mol4.5\,\text{kcal/mol}) more stable.
    • Disubstituted trans (R−CH=CH−R\text{R}-\text{CH}=\text{CH}-\text{R}): 22 kJ/mol22\,\text{kJ/mol} (5.2 kcal/mol5.2\,\text{kcal/mol}) more stable.
    • Trisubstituted (R2C=CH−R\text{R}_2\text{C}=\text{CH}-\text{R}): 25 kJ/mol25\,\text{kJ/mol} (5.9 kcal/mol5.9\,\text{kcal/mol}) more stable.
    • Tetrasubstituted (R2C=CR2\text{R}_2\text{C}=\text{CR}_2): 26 kJ/mol26\,\text{kJ/mol} (6.2 kcal/mol6.2\,\text{kcal/mol}) more stable.

relative thermodynamic stabilities of alkenes according to substitution

  • Trans vs. Cis Relative Stability:
    • Trans isomers are universally more stable than their corresponding cis isomers because the bulky alkyl groups are directed away from each other (180∘180^\circ opposed across the double bond), eliminating the steric hindrance and van der Waals strain present when they are forced onto the same side.

Cycloalkenes, Ring Strain, and Bredt's Rule

  • Ring Strain in Small Cycloalkenes:
    • Five-membered rings and larger readily accommodate a cis double bond with minimal strain and behave similarly to acyclic alkenes.
    • Cyclopentene: Heat of hydrogenation = −112.7 kJ/mol-112.7\,\text{kJ/mol} (−26.9 kcal/mol-26.9\,\text{kcal/mol}).
    • Cyclobutene: Heat of hydrogenation = −129.7 kJ/mol-129.7\,\text{kJ/mol} (−31.0 kcal/mol-31.0\,\text{kcal/mol}). Cyclobutene possesses about 17.0 kJ/mol17.0\,\text{kJ/mol} (4.1 kcal/mol4.1\,\text{kcal/mol}) more strain energy than cyclopentene.
    • Cyclopropene: The internal carbon-carbon bond angles are compressed to roughly 60∘60^\circ, which is half the normal trigonal planar angle of 120∘120^\circ. This severe angle strain (60∘60^\circ of deformation) makes the double bond in cyclopropene exceptionally reactive and unstable.

angle strain in cyclopropene compared to propene

  • Trans-Cycloalkenes and Minimum Ring Size:

    • In rings containing 3 to 7 carbons, the double bond can exist only in the cis geometry. A trans double bond would require twisting the carbon chain across the face of the ring, inducing catastrophic angle and torsional strain.
    • A cycloalkene must contain at least 8 carbon atoms (such as cyclooctene) to be large and flexible enough to accommodate a trans double bond at room temperature.
    • In a 10-membered ring (cyclodecene), both cis-cyclodecene and trans-cyclodecene are stable and easily isolated.
  • Bicyclic Systems: Fused vs. Bridged:

    • Bicyclic Compound: A hydrocarbon containing two rings that share common carbon atoms.
    • Bridgehead Carbons: The specific carbon atoms shared by both rings.
    • Fused Bicyclic Compound: The rings share two adjacent carbon atoms, joined directly by a single covalent bond with zero intervening carbon atoms (e.g., decalin).
    • Bridged Bicyclic Compound: The bridgehead carbon atoms are separated by three independent paths (bridges), each containing at least one carbon atom (e.g., norbornane / bicyclo[2.2.1]heptane).

structural difference between bridged and fused bicyclic systems

  • Bredt's Rule:

    • Rule Statement: A bridged bicyclic compound cannot have a double bond at a bridgehead position unless one of the rings contains at least eight carbon atoms.
    • Mechanistic Basis: A double bond at a bridgehead carbon in a bridged system forces the π\pi bond to adopt a trans configuration within one of the rings. If that ring contains fewer than eight carbons, the unhybridized pp orbitals cannot achieve parallel overlap without tearing the ring framework apart.
  • Evaluation of Bicyclic Alkene Stability:

    • Structure (a) (Bicyclo[4.4.0]dec-1-ene): Stable. Although the double bond is located at a bridgehead position, this is a fused bicyclic system (not a bridged system), and the trans-configured double bond is accommodated within a flexible 10-membered ring perimeter.
    • Structure (b) (Bicyclo[2.2.2]oct-1-ene): Unstable (Violates Bredt's Rule). The double bond is at a bridgehead position of a bridged bicyclic framework whose largest ring contains only 6 carbon atoms (<8< 8).
    • Structure (c) (Norbornene / Bicyclo[2.2.1]hept-2-ene): Stable. The double bond is in a cis configuration across carbons 2 and 3 and is not located at a bridgehead position.
    • Structure (d) (Bicyclo[3.3.1]non-1-ene): Stable. The double bond is at a bridgehead of a bridged system, but the largest ring containing the double bond has exactly 8 carbon atoms, which satisfies Bredt's rule threshold (≥8\ge 8).

evaluation of alkene stability in bicyclic ring systems under Bredt's rule

Physical Properties and Industrial Polymerization of Alkenes

  • Physical Properties of Representative Alkenes:
    • Alkenes share physical properties similar to corresponding alkanes: they are nonpolar to slightly polar, insoluble in water, soluble in nonpolar organic solvents, and less dense than water (∼0.52−0.74 g/cm3\sim 0.52 - 0.74\,\text{g/cm}^3).
    • Boiling points increase regularly with increasing molecular mass due to enhanced London dispersion forces.
    • Increased branching lowers the boiling point by creating a more spherical, compact structure with reduced surface contact area.
Alkene NameMolecular StructureCarbon CountBoiling Point (∘C^\circ\text{C})Density (g/cm3\text{g/cm}^3)
Ethene (ethylene)CH2=CH2\text{CH}_2=\text{CH}_22−104-104—
Propene (propylene)CH3CH=CH2\text{CH}_3\text{CH}=\text{CH}_23−47-470.520.52
2-Methylpropene (isobutylene)(CH3)2C=CH2(\text{CH}_3)_2\text{C}=\text{CH}_24−7-70.590.59
But-1-eneCH3CH2CH=CH2\text{CH}_3\text{CH}_2\text{CH}=\text{CH}_24−6-60.590.59
trans-But-2-eneCH3−CH=CH−CH3\text{CH}_3-\text{CH}=\text{CH}-\text{CH}_34110.600.60
cis-But-2-eneCH3−CH=CH−CH3\text{CH}_3-\text{CH}=\text{CH}-\text{CH}_34440.620.62
3-Methylbut-1-ene(CH3)2CH−CH=CH2(\text{CH}_3)_2\text{CH}-\text{CH}=\text{CH}_2525250.650.65
Pent-1-eneCH3(CH2)2CH=CH2\text{CH}_3(\text{CH}_2)_2\text{CH}=\text{CH}_2530300.640.64
trans-Pent-2-eneCH3−CH=CH−CH2CH3\text{CH}_3-\text{CH}=\text{CH}-\text{CH}_2\text{CH}_3536360.650.65
cis-Pent-2-eneCH3−CH=CH−CH2CH3\text{CH}_3-\text{CH}=\text{CH}-\text{CH}_2\text{CH}_3537370.660.66
2-Methylbut-2-ene(CH3)2C=CH−CH3(\text{CH}_3)_2\text{C}=\text{CH}-\text{CH}_3539390.660.66
Hex-1-eneCH3(CH2)3CH=CH2\text{CH}_3(\text{CH}_2)_3\text{CH}=\text{CH}_2664640.680.68
2,3-Dimethylbut-2-ene(CH3)2C=C(CH3)2(\text{CH}_3)_2\text{C}=\text{C}(\text{CH}_3)_2673730.710.71
Hept-1-eneCH3(CH2)4CH=CH2\text{CH}_3(\text{CH}_2)_4\text{CH}=\text{CH}_2793930.700.70
Oct-1-eneCH3(CH2)5CH=CH2\text{CH}_3(\text{CH}_2)_5\text{CH}=\text{CH}_281221220.720.72
Non-1-eneCH3(CH2)6CH=CH2\text{CH}_3(\text{CH}_2)_6\text{CH}=\text{CH}_291461460.730.73
Dec-1-eneCH3(CH2)7CH=CH2\text{CH}_3(\text{CH}_2)_7\text{CH}=\text{CH}_2101711710.740.74
  • Commercial Importance and Addition Polymers:
    • Beyond their utility as chemical intermediates in organic synthesis, the primary industrial application of alkenes is serving as monomers for addition polymerization.
    • Polypropylene: Prepared by polymerizing propylene (CH2=CH−CH3\text{CH}_2=\text{CH}-\text{CH}_3); utilized in packaging, textiles, and automotive moldings.
    • Poly(vinyl chloride) (PVC): Synthesized from vinyl chloride (CH2=CH−Cl\text{CH}_2=\text{CH}-\text{Cl}); widely employed in rigid piping, construction materials, and vinyl flooring.
    • Polytetrafluoroethylene (PTFE, Teflon®): Formed by the polymerization of tetrafluoroethylene (TFE, CF2=CF2\text{CF}_2=\text{CF}_2); notable for high thermal resistance, chemical inertness, and nonstick properties.
    • Polystyrene: Polymerized from styrene (phenylethene, CH2=CH−Ph\text{CH}_2=\text{CH}-\text{Ph}); used in packaging, insulation, and consumer goods.

addition polymerization reactions for propylene, vinyl chloride, and tetrafluoroethylene