Module-III: LASER (Phy)

Fundamentals of Laser Radiation

  • LASER Acronym: LASER stands for Light Amplification by Stimulated Emission of Radiation.

  • Laser Light vs. Ordinary Light Characteristics:

    • Monochromaticity: Laser light is monochromatic, whereas ordinary light is non-monochromatic.

    • Emission Mechanism: Laser light is produced by stimulated emission, whereas normal light is produced by spontaneous emission.

    • Coherence: Laser light is coherent, whereas normal light is incoherent.

Interaction of External Energy with Atomic Energy States

There are three distinct types of interactions between external energy and atomic energy states:

1. Induced Absorption

  • Mechanism: At ordinary temperatures, most atoms reside in the lowest energy state (ground state E1E_1). When photons interact with the system, an atom absorbs a photon and transitions from lower energy state E1E_1 to an excited energy state E2E_2.

  • Transition Process:   Photon+Atom→Atom∗\text{Photon} + \text{Atom} \rightarrow \text{Atom}^*

  • Energy Equation:   hν=E2−E1h\nu = E_2 - E_1

  • Lifetime of Excited State: Atoms remain in the excited state for a limited time on the order of 10−8 s10^{-8}\,\text{s}, which is known as the lifetime of the excited state.

2. Spontaneous Emission

  • Mechanism: The higher energy excited state of an atom (Atom∗\text{Atom}^*) is highly unstable. Due to the natural tendency to attain minimum potential energy, an excited atom returns to the lower energy state E1E_1 after its lifetime ends, without any influence from external energy.

  • Transition Process:   Atom∗→Atom+Photon\text{Atom}^* \rightarrow \text{Atom} + \text{Photon}

  • Energy Equation: The excess energy is released as a photon of energy:   hν=E2−E1h\nu = E_2 - E_1

  • Nature of Emission: Spontaneous emission occurs naturally and produces incoherent radiation.

3. Stimulated Emission

  • Mechanism: An atom in the excited state does not need to wait for spontaneous emission to occur. If a photon having suitable energy hν=E2−E1h\nu = E_2 - E_1 interacts with the excited atom, the incident photon triggers the atom to make a downward transition, releasing energy in the form of a photon.

  • Transition Process:   Photon+Atom∗→Atom+2 Photons\text{Photon} + \text{Atom}^* \rightarrow \text{Atom} + 2\,\text{Photons}

  • Energy Equation:   hν=E2−E1h\nu = E_2 - E_1

  • Key Feature: The emission is triggered by an external photon, producing a second photon with identical energy, frequency, phase, and direction as the triggering incident photon.

Comparison Between Spontaneous Emission and Stimulated Emission

  • Nature of Process:

    • Spontaneous Emission: It is a natural process.

    • Stimulated Emission: It is an artificial transition.

  • Coherence:

    • Spontaneous Emission: The emitted radiation is incoherent.

    • Stimulated Emission: The emitted radiation is coherent.

  • Monochromaticity:

    • Spontaneous Emission: Emitted light is not monochromatic.

    • Stimulated Emission: Emitted light is nearly monochromatic.

  • Intensity:

    • Spontaneous Emission: The emitted radiation is less intense.

    • Stimulated Emission: The emitted radiation is highly intense.

  • Reaction Equations:

    • Spontaneous Emission: Atom∗→Atom+Photon\text{Atom}^* \rightarrow \text{Atom} + \text{Photon}

    • Stimulated Emission: Photon+Atom∗→Atom+2 Photons\text{Photon} + \text{Atom}^* \rightarrow \text{Atom} + 2\,\text{Photons}

Metastable State

  • Definition: An energy state in an atom where excited atoms can remain for a significantly longer duration before making a transition to a lower energy state.

  • Lifetimes Comparison:

    • Most standard excited energy states have a short lifetime of the order of 10−8 s10^{-8}\,\text{s}.

    • Metastable states have a very long lifetime of the order of 10−6 s10^{-6}\,\text{s} to 10−3 s10^{-3}\,\text{s}.

  • Significance in Laser Action:

    • The extended lifetime in a metastable state allows for the accumulation of a large number of excited atoms at that energy level.

    • It would be impossible to create the state of population inversion without a metastable state.

Population Inversion and Boltzmann Distribution

Boltzmann Distribution Law

For an energy state EE having NN atoms per unit volume, the population is given by the Boltzmann equation: N=N0e−EkBTN = N_0 e^{-\frac{E}{k_B T}} Where:

  • kBk_B = Boltzmann constant

  • TT = Absolute temperature

  • N0N_0 = Population of the ground state (where energy E=0E = 0)

Thermal Equilibrium Population

  • Under thermal equilibrium, population is maximum in the ground state and decreases exponentially as energy increases.

  • For two energy states E1E_1 and E2E_2 (where E2>E1E_2 > E_1) with populations N1N_1 and N2N_2 respectively:   N1=N0e−E1kBTN_1 = N_0 e^{-\frac{E_1}{k_B T}}   N2=N0e−E2kBTN_2 = N_0 e^{-\frac{E_2}{k_B T}}

  • Taking the ratio of populations:   N2N1=e−E2−E1kBT\frac{N_2}{N_1} = e^{-\frac{E_2 - E_1}{k_B T}}   N2=N1e−E2−E1kBTN_2 = N_1 e^{-\frac{E_2 - E_1}{k_B T}}

  • Since E2>E1E_2 > E_1, under thermal equilibrium condition N2<N1N_2 < N_1. Thus, population decreases with an increase in the energy of the system.

Condition for Population Inversion

  • For laser action and emission processes, the number of excited atoms must be greater than the number of atoms in the ground state.

  • The number of atoms in the higher energy level E2E_2 must be greater than the number of atoms in the lower energy state E1E_1 (N2>N1N_2 > N_1).

  • The process by which this non-equilibrium state (N2>N1N_2 > N_1) is achieved is known as population inversion.

Negative Temperature State

  • Mathematical Explanation: From equation N2=N1e−E2−E1kBTN_2 = N_1 e^{-\frac{E_2 - E_1}{k_B T}}, N2>N1N_2 > N_1 can occur only when TT assumes a negative value (T<0T < 0). Therefore, the state of population inversion is also called the negative temperature state.

  • Physical Interpretation: Negative temperature is not a physical thermal temperature, but rather a convenient mathematical expression that satisfies the non-thermal equilibrium state of the system.

Pumping Methods and Active Medium

Pumping Methods

  • Definition: Pumping is the process by which population inversion is produced and maintained by continuously promoting atoms from lower energy levels to excited energy levels.

  • Commonly Used Pumping Methods:

    1. Optical Pumping: A light source is used to supply luminous energy.

    2. Electrical Discharge / Electrical Ions: Electrical energy/ions excite atoms to higher energy levels.

    3. Chemical Pumping: Energy released from chemical reactions is used for excitation.

    4. Inelastic Atom-Atom Collision: Excitation energy is transferred between atoms through inelastic collisions.

    5. Direct Pumping: Direct excitation mechanism.

Active Medium

  • Definition: An active medium is a medium that, when excited, reaches the state of population inversion and promotes stimulated emission leading to light amplification.

  • Active Reservoir / Atoms: The specific atoms that cause laser action through the stimulated emission of light are called the active medium or active reservoir.