Alberta Basic Licence Driver's Assessment Flashcards
Speed Limits and Road Zones
According to the Alberta Basic Licence Driver's Handbook, the basic speed limit outside a city, town, or village on a primary highway is , unless a different speed is posted. Within urban areas, speed limit signs indicate the maximum speed permitted only when driving conditions are favourable. When passing a vehicle on a highway, a driver is never permitted to exceed the posted speed limit.
In a school zone within a rural area, the maximum permitted speed is at on a school day, unless otherwise posted. Generally, school zone speed limits are in effect on school days during the following specific time intervals: to , to , and to . Playground zones have different hours, remaining in effect from until after sunset. Speed limits in construction zones must be obeyed at all times, regardless of the presence of workers or time of day.
Intersection Procedures and Right-of-Way
When approaching an intersection with a steady yellow traffic light, a driver must stop before the intersection unless the stop cannot be made safely. If a driver faces a traffic control light showing a green right-turn arrow along with a red light, they may proceed in the direction of the arrow without stopping, provided it is safe to do so. In the case of a flashing yellow traffic light, it indicates that the traffic light will turn red. A flashing red traffic light requires the driver to come to a full stop and proceed only when it is safe.
At a red traffic control light, a right turn is permitted unless prohibited by a sign, provided the driver reduces speed, there is no traffic or pedestrians in the intersection, and the turn can be completed safely. The standard procedure for this turn involves signalling, checking for prohibitive signs, stopping, looking left and right, and yielding the right-of-way before proceeding. When turning left at a steady green light, a driver must not cross the path of an approaching vehicle unless it is safe to do so. Dual turns are only allowed at intersections where they are explicitly indicated by pavement markings or traffic control signs.
Right-of-way rules vary by intersection type. At an uncontrolled intersection, which has no traffic control signal lights or signs, drivers must exercise caution. In an uncontrolled "T" intersection where two vehicles approach at right angles at approximately the same time, the vehicle on the left must yield the right-of-way to the vehicle on the right. When entering a traffic circle, the entering driver must yield to vehicles already inside the circle. When encountering a funeral procession crossing an intersection, drivers must yield the right-of-way and are prohibited from breaking through the procession.
Parking Regulations and Maneuvers
There are specific distance requirements for parking near road features. A vehicle must be parked at a minimum distance of from a fire hydrant and from a stop sign. When completing an angle park, the vehicle's front wheel must be within a maximum distance of from the nearest curb. For parallel parking, a driver must shoulder check to the left before leaving a parking space on the right side of the road. When parking uphill on a two-way road with a curb, the front wheels should be turned to the left. Parking in spaces reserved for persons with disabilities is only permitted when the vehicle displays a proper identifying placard or licence plate. A "parking lane" is defined as the portion of a primary highway between the edge of the roadway to the right of the direction of traffic and the nearest solid white line (not the centre line) marked on the roadway.
When reversing a passenger vehicle to the left, the driver should look over their left shoulder while taking occasional glances to the front. To reverse in a straight line, the driver should place their left hand at the top of the steering wheel and look over their right shoulder through the rear window. When exiting a parking lot onto a roadway, a vehicle must come to a complete stop before proceeding.
Pavement Markings and Signage Meanings
A large "X" painted on the pavement, or a circular sign with an "X", indicates a railway crossing ahead. A single solid white line between driving lanes in an urban area signifies that lane changing is not permitted. A solid yellow line paired with a broken yellow line at the centre of a highway means passing is permitted only if the broken line is on the driver's side of the road. A traffic-lane control light with an illuminated red "X" means travel is not permitted in that specific lane.
Various road signs provide critical information. A sign with an "H" indicates hospital services. A construction sign warns of people working ahead. A sign showing a triangle inside another triangle indicates a slow-moving vehicle. Other signs include: Dead End, Divided Highway Begins, School Bus Stop Ahead, School Area, School Crosswalk Ahead, Straight Through or Right Turn, Traffic Control Signal Advance Warning, Winding Road Ahead, Pedestrian Crosswalk, Lane Ends (Loss of Right Lane), Do Not Pass, Curve Right, Uneven Pavement, and Dangerous Goods Route. A "Merge" sign requires a driver to watch for a gap in traffic on the highway, adjust to highway speed in the acceleration lane, and blend in smoothly. A "Passing Lane Ahead" sign informs the driver of a slower-moving vehicle to move into the right lane when safe.
Safe Driving Practices and Vehicle Dynamics
Drivers should scan the road approximately to ahead when travelling in urban areas. Using the rule to judge following distance is considered accurate at any speed. If a vehicle is following too closely, a driver should slow down gradually to encourage the other vehicle to pass. Shoulder checking involves glancing toward the blind spot in the direction the driver intends to move. When a driver's right tires travel off the paved portion of the roadway, the instruction is to accelerate slightly and then turn the steering wheel sharply to return to the paved portion. When stopping behind another vehicle in traffic, sufficient space should be left to move into another lane without having to reverse.
When navigating a highway curve, the recommended method is to reduce speed before the curve, stay in the lane, and gently accelerate after entering the curve. When approaching the top of a hill on a two-lane highway, the driver should stay to the right portion of the lane. In conditions of reduced visibility due to fog, smoke, or snow, headlights should be used on low beam. At night, "over-driving" headlights occurs when a driver travels at a speed that does not permit them to see an object in time to stop. Headlights must be dimmed at a minimum distance of when approaching another vehicle from behind.
Skids are most often the result of driver error. When recovering from a skid, the driver should steer in the direction they want the front of the vehicle to go. For vehicles without anti-lock brakes, "threshold braking" involves applying even braking force to the point just before the wheels lock and easing off slightly if they do. The standard procedure for a smooth stop is to apply brake pressure, ease off slightly just before the vehicle stops, then re-apply sufficient pressure to complete the stop.
Sharing the Road and Special Vehicles
Pedestrian safety is paramount. In urban areas, if a pedestrian stands at a crosswalk with their arm raised at a right angle and pointing to the opposite curb, drivers must stop and yield. When a vehicle is stopped to allow a pedestrian to cross, it is illegal for other vehicles approaching from the rear to pass the stopped vehicle. When approaching a Yield sign, a driver must yield the right-of-way to all pedestrians in the intersection as well as traffic not facing the sign.
School buses require specific caution. When approaching the rear of a school bus with alternating flashing amber lights, a driver must be prepared to stop. If the bus has its alternating flashing red lights activated, the driver must stop behind the bus and wait until the lights stop flashing. Regarding large trucks, drivers should leave extra room before returning to their lane after passing. It is unsafe to pass a loaded log-haul truck that is turning because a danger zone exists where the logs' overhang could block all highway lanes. Any vehicle that normally travels at speeds less than must display a "slow-moving vehicle" sign on the rear.
At railway crossings with active flashing red lights and bells, drivers must stop at least from the nearest rail until the train has passed. When approached by an emergency vehicle sounding a siren from any direction on a two-way road, a driver must drive as close as possible to the right curb or edge of the road and stop.
Licensing, Legal Requirements, and GDL Program
Under the Alberta Graduated Driver Licensing (GDL) program, a learner with a Class 7 operator's licence will be suspended if they accumulate demerits. Class 7 learners are also prohibited from driving between the hours of and . A fully licensed driver is suspended upon accumulating demerit points. A driver will receive demerits for having more passengers than there are seat belts. Parents have the right to withdraw previously given parental consent for a driver under years of age, provided the individual is not married or self-supporting.
In Alberta, seat belts must be worn properly at all times. It is the driver's responsibility to ensure all passengers under years of age are properly restrained. For proper safety, the centre of a head restraint should be level with the top of the ears. "Nighttime" is legally defined as the period beginning after sunset and ending before the following sunrise. Drivers are required to report all collisions to the police if there are injuries or fatalities, or if the combined damage to all property and vehicles exceeds . Finally, a driver examiner will refuse a road test if the vehicle is not mechanically safe.