Comprehensive Study Guide for Long-term Assets (Current as of 2025)
Legal Framework and Classification of Long-term Assets
The legal status of long-term assets outlined in these notes is current as of , as presented by Stanislav Suchan (). Long-term assets are defined fundamentally by their useful life, which must exceed . In many instances, the accounting unit must also establish a specific monetary threshold to classify an item as a long-term asset. The classification is primarily governed by the Accounting Act ( VPP, VPP), the VAT Act ( ZDPH), and the Income Tax Act ( ZDP, ZDP).
Long-term Intangible Assets (DNM) are categorized across various accounts. Intangible results of research and development are tracked on account . Software is recorded on , and valuable rights appear on . Other categories include preferential limits (), emission allowances (), goodwill (), small intangible assets (), and other intangible assets (). Unfinished intangible assets are tracked on , while advances and deposits for these assets are on .
Long-term Tangible Assets (DHM) follow a similar structure. Buildings and structures are recorded on account . Independent movable items and sets of movable items are on . Perennial crops (), adult animals and their groups (), and valuation differences for acquired assets () are also included. Further categories include small tangible assets (), other tangible assets (), land (), and artistic works, collections, or cultural monuments (). Unfinished tangible assets use account , and advances for these use .
Specific rules apply to the activation of certain intangible assets. Account for research and development only includes successfully completed work that is not part of other industrial rights and must be acquired independently. If an accounting unit () develops these results internally, they can only be included in DNM if they are intended for trade; internal-use development is recorded directly as an expense. Similarly, industrial property, intellectual activity results, and rights on account (such as inventions, trademarks, projects, or industrial designs) are only activated if they are not for the 's internal needs.
Special Provisions for Preferential Limits and Emission Allowances
Preferential limits (account ) are considered long-term intangible assets for their first holder only if the cost of obtaining the valuation at replacement price () does not exceed the significance of the information. For any subsequent holders, they are always classified as DNM regardless of the valuation amount. The free acquisition of emission allowances () or preferential limits by the first holder is accounted for as a subsidy at the level of the , with the accounting entry typically being .
Certain items are explicitly excluded from being classified as long-term intangible assets. These include expert opinions, market research, development plans, advertising and promotion designs, quality system certifications, and software integrated into technology that cannot function without it. Accounting units may also choose to exclude technical audits, energy audits, forest management plans, and river basin plans from their DNM.
Goodwill and Valuation Differences in Business Acquisitions
When an accounting unit acquires a business plant (), there are two primary methods for valuation. The first is individual valuation of the acquired components, which results in Goodwill. The second involves taking over the book values from the seller's records, which results in a Valuation Difference to Acquired Assets (). Goodwill represents the difference between the purchase price and the market price of net assets (assets minus liabilities). It can be positive or negative.
For accounting purposes, Goodwill () must be depreciated evenly within of acquisition, or in case of transformations, between . The specific duration chosen must be justified in the notes to the financial statements. Positive goodwill is recorded as an expense (MD), while negative goodwill is recorded as income (D). In contrast, the Valuation Difference for Acquired Assets () is depreciated evenly over . If the acquired assets do not have a useful life exceeding , the may choose a shorter period than , with justification.
From a tax perspective ( par. 15 ZDP), tax depreciation of goodwill and valuation differences is only possible if the business was acquired through an onerous transfer (); transfers via investment () do not qualify because they do not generate taxable income for the investor. Tax depreciation is applied evenly over . On the tax return, positive values decrease the tax base on line , while negative values increase the tax base on line .
Asset Valuation Methods and Activation
Assets are valued depending on the method of acquisition as per ZOÚ. The Acquisition Price () is used for purchases or exchanges where the price is agreed upon in a contract. The Replacement Purchase Price () is used for gratuitous acquisitions, segments where own costs cannot be determined, or exchanges where the contract does not specify a price. Finally, Own Costs () apply to assets created through the unit's own activity.
Activation of tangible assets through own activity involves complex accounting over multiple periods. For example, building a production line might involve costs in year for materials, labor (), insurance (), and services, which are tracked as work-in-progress. In year , further costs are added before the asset is finally moved from unfinished assets () to use ().
The Moment of Asset Commissioning
The moment an asset is "brought into use" () is critical. For intangible assets ( par. 8 VPP), this means reaching a state capable of use, characterized by the completion of the asset and fulfillment of all technical and legal functions required by law. For tangible assets ( par. 11 VPP), it similarly requires completion and meeting all technical requirements and legal obligations for use. This also applies to technical improvements ().
Specific examples of commissioning moments include: for software (account ), the moment installation or testing is complete; for buildings (), the moment of final inspection/approval (); for vehicles (), the moment a registration plate is assigned; and for production lines (), the completion of a trial run. Off-balance sheet accounts should be used to record foreign assets, rights like mortgages, assets fully covered by subsidies, leased assets, assets in custody, provided guarantees, and lease liabilities.
Assets Excluded from Depreciation
Three main groups of assets are excluded from depreciation under ZDP. The first group includes land and financial assets. The second group covers specific tangible assets such as financial leases with free transfer, perennial crops before they reach fruiting maturity, and hydromelioration (water management improvements) completed within . The third group consists of cultural and artistic items, including artistic works (unless they are a structural part of a building like a fresco), movable cultural monuments, and their sets.
Further exclusions apply to assets acquired through specific legal or procedural paths. This includes assets that must be transferred for free by law (e.g., utility connections), inventory surpluses () unless they are accounted for as income, assets used to secure a debt through the transfer of rights () during the duration of that security, assets hired from abroad (including financial leases), and assets acquired as gifts that are tax-exempt. Importantly, if a technical improvement () is made on an asset excluded from depreciation, it does not increase the asset's input price but becomes a separate "other asset" ( par. 3 letter a) ZDP) and is categorized into the same depreciation group as the underlying asset.
Disposal of Assets and Incidental Acquisition Costs
When disposing of an asset, the accounting unit must identify the specific reason to determine which account receives the remaining book value. For immovable property, the disposal date is the day the proposal for the entry of the change in ownership is submitted to the Real Estate Register. For other assets, it is the date of sale, gift, or completion of a liquidation protocol. Common disposal accounts include those for liquidation, sale, damage/theft (), free transfer (), or transfer into the personal use of an entrepreneur.
Incidental acquisition costs () are costs that enter the purchase price of the asset. These include customs duties (), transport, installation, assembly, search for construction alternatives, engineering, and insurance during construction. Specifically, social and health insurance for workers building the asset, energy consumption at the site, and depreciation of construction equipment are included. However, certain costs are strictly excluded from the asset's price and must be expensed: exchange rate differences, training for staff (), market research, waste disposal, fines () for delayed construction, and audits. Interest on loans for construction is included in the purchase price only until the moment the asset is commissioned, after which it becomes a financial expense.
Easements and the Right to Build
An easement () allows an entity to use part of the value of someone else's property, providing economic benefit to the beneficiary while limiting the owner's rights. These are divided into servitudes () and real burdens (). Servitudes involve a passive obligation for the owner to "endure" something, like a path or a sewer pipe, and are established upon entry into the Real Estate Register. Real burdens require the owner to actively perform something for the beneficiary. From a VAT perspective (), establishing an easement is a taxable service (), though it may be exempt if it meets the criteria for a lease under ZDPH.
Accounting for easements requires valuation at acquisition cost. If an easement is acquired for a fixed term, it is depreciated over that term. If the term is indefinite, the estimates the useful life for depreciation. For example, if a company pays for an indefinite right of way and sets a depreciation period of , the annual depreciation is .
The Right to Build () is treated as an intangible thing but simultaneously as immovable property. It cannot be established for more than . It is recorded in the Real Estate Register and can be classified either as part of a building's valuation (if the goal is to build), as an independent tangible asset (if no construction is planned), or as goods (if held for trade). If a Right to Build is acquired for a site where a building already exists, the must split the valuation between the right itself and the building.
Advanced Depreciation: Components and Technical Improvements
Component depreciation () allows an entity to separate a large asset into parts with different useful lives. For example, a machine () might have a component () that wears out faster than the rest of the unit. Depreciation can be calculated based on time (years) or units produced (e.g., ). When a component is replaced, the old component's remaining book value is removed (), and the new component is activated ().
Technical improvements () such as modernization or reconstruction affect the asset's valuation and depreciation. If the cost of the exceeds the internal threshold (e.g., ), it is activated. The depreciation calculation must then be adjusted: the remaining book value plus the cost of the is depreciated over the remaining (or extended) useful life of the asset. Residual value () must also be factored in to ensure the asset is not depreciated below a certain estimated scrap or resale value.