Detailed Study Notes on Marine Biok and Salinity

Salinity

Overview of Oceans

  • Major Oceans:

    • Pacific Ocean: 50.1% of ocean's surface area, average depth of 3940 m, total volume of 714.4 x 10^6 km³.

    • Atlantic Ocean: 26.0% of surface area, average depth of 3575 m, total volume of 337.2 x 10^6 km³.

    • Indian Ocean: 20.5% of surface area, average depth of 3840 m, total volume of 284.6 x 10^6 km³.

    • Arctic Ocean: 3.4% of surface area, average depth of 1117 m, total volume of 13.7 x 10^6 km³.

  • The Southern Ocean is divided between the Indian and Pacific Oceans.

Divisions of the Marine Environment

  • The water column is classified into zones based on:

    • Depth

    • Temperature

    • Light availability

  • Aphotic Zone: Lacks sufficient light for photosynthesis.

  • Continental shelves vary in width.

  • Mention of Celtic Deep.

Sea Floor Features

  • Average depth of the sea floor: 3 - 6 km.

  • Key Sea Floor Features:

    • Abyssal Plain: 70% of ocean floor; flat area consisting mostly of several km thick mud.

    • Seamount: An underwater volcano that hasn’t reached the surface.

    • Island: A seamount that has reached the surface.

    • Guyots: Extinct volcanoes with flat tops due to wave erosion and wind.

    • Abyssal Hills: Most abundant geomorphic structures on Earth, with a maximum height of 1 km.

  • These features alter deep water flow, creating upwelling and enhancing deposition of organic matter (OM).

Water Composition

  • Chemical Composition: Pure water consists of 2 hydrogen atoms and 1 oxygen atom (H₂O).

  • Specific Heat Capacity: 1.00 calories g⁻¹ ºC⁻¹.

  • Thermal Inertia: Results from high specific heat capacity.

  • Hydrogen Bonding: Important for water's unique properties.

  • Seawater: Differentiated from pure water due to solute presence.

    • Key salinity figures:

    • Osmolality range: 1000 - 1150 mOsm.

    • Common ions:

      • [Ca2+]:10extmmoll−1,\big[Ca^{2+}\big]: 10 ext{ mmol l}^{-1},

      • [Cl−]:470extmmoll−1\big[Cl^{-}\big]: 470 ext{ mmol l}^{-1},

      • [SO42−]:10extmmoll−1,\big[SO_{4}^{2-}\big]: 10 ext{ mmol l}^{-1},

      • [HCO3−]:54extmmoll−1,\big[HCO_{3}^{-}\big]: 54 ext{ mmol l}^{-1},

      • [Mg2+]:2extmmoll−1,\big[Mg^{2+}\big]: 2 ext{ mmol l}^{-1},

      • [K+]:0.39extmmoll−1,\big[K^{+}\big]: 0.39 ext{ mmol l}^{-1},

      • [Na+]:19.4extgl−1\big[Na^{+}\big]: 19.4 ext{ g l}^{-1}.

    • Effects of seawater:

    • Boiling point elevation.

    • Freezing point depression (to -1.8ºC).

    • Increased density (mass/volume).

    • Salinity: Average of 35‰ (practical salinity units - PSU), highly variable.

Salinity Variability

  • Salinity exhibits variability based on:

    • Latitude

    • Depth

  • Salinity Measurements with depth (m) present:

    • 0 m: 37‰

    • 1000 m: 34.75‰

    • 2000 m: 34.85‰

    • 3000 m: 34.75‰

    • 4000 m: 34.85‰

    • 5000 m: 34.5‰

    • 6000 m: 35‰ (across varying latitudes).

Ocean Circulation

  • Ocean Circulation: Continuous global movement of water at surface and depth.

    • Components:

    • Surface Currents: Primarily wind-driven.

    • Deep Water Currents: Once thought thermohaline-driven but now considered mainly wind-driven.

  • Influences on seawater density: salinity, temperature, pressure.

Density Variability

  • Density Variation Factors:

    • At 0º: seawater is less dense due to higher temperatures and increased rainfall.

    • At 30ºN and S: seawater is denser due to colder temperatures and reduced rainfall.

    • At 60ºN and S: seawater is very dense due to colder temperatures and freezing conditions.

Thermohaline Circulation

  • Definition: Circulation driven by surface climatic conditions and freezing which alters density.

  • Water Mass Identification: Models suggest interplay with other circulation processes.

  • Types of Stability:

    • Overturn: Dense water forms above less dense water, leading to instability.

    • Neutral Stability: Uniform salinity throughout.

    • Stable: Less dense water sits atop denser water.

  • Types:

    • Surface Water: Depth 0-550 m.

    • Intermediate Water: Depth 550-1500 m.

    • Deep/Bottom Waters: Depth greater than 1500 m.

  • Features unique chemical signatures.

Convergence and Divergence

  • Convergence/Downwelling: Dense water forms above less dense water and sinks.

    • Important for delivering warmer O2-rich water to depths out of the euphotic zone.

  • Divergence/Upwelling: Rising seawater to the surface due to displacing converging water.

    • Critical for bringing nutrient-rich cold water to the surface.

  • Global mapping of these processes is necessary.

Ice Formation at the Poles

  • Polynyas: Areas of the ocean that remain ice-free, classified into:

    • Coastal Polynya: Created by cold winds blowing off land, cooling water to below freezing.

    • Open Ocean Polynya: Warm displaced water at divergence reaches surface, cools, and sinks.

  • Characteristics of Polynyas:

    • Annual formation at the same locations.

    • Generate dense cold water aiding global circulation, particularly thermohaline circulation, although their significance is reassessed.

    • Key habitats for birds, mammals, etc.

  • High temperatures recorded around these areas (1ºC).

Great Ocean Conveyor Belt

  • Mechanism: Thermohaline circulation contributes to deep water formation combined with wind, acting as the main driver for the oceanic conveyor belt.

Variability of Oceanic Habitats

  • Recognition of diverse habitats where salinity varies, critical for the ecological balance and marine biodiversity.

Estuaries

  • Definition: A partially enclosed tidal inlet where seawater and freshwater mix.

  • Conditions:

    • High variability in salinity, temperature, immersion/emersion, and turbidity.

    • Biota faces significant challenges.

  • Predominantly marine-origin organisms, impacted by anthropogenic effects.

Classification of Estuaries

  • Formation-Based Classification:

    • Fjord

    • Ria

    • Coastal Plain

    • Bar-Built

    • Blind

    • Delta Front

    • Tectonic

  • Mixing Degree Classification:

    • Salt Wedge Estuaries: Slow seawater ingress with fast freshwater outflow (e.g., Mississippi, Amazon).

    • Partially Mixed: Faster seawater ingress with fast outflow (e.g., Thames).

    • Fjord: Limited flow, seawater ingresses and sinks while freshwater outflows quickly (stagnant, often anoxic water at depth; e.g., Norway, Chile).

    • Well Mixed: Rapid seawater ingress and outflow (e.g., Severn).

Intertidal Zones

  • Salinity Variability: Salinity can fluctuate greatly due to:

    • Increased evaporation

    • Precipitation

    • Seasonal changes

    • Tides

    • Diel fluctuations

  • Driving Factors: Timing of low tide and temperature gains, leading to:

    • Desiccation

    • High temperature conditions

    • Low oxygen scenarios.

  • Adaptations: Organisms exhibit evolved behaviors and physiological adaptations to cope with these fluctuations, such as the crab species Carcinus maenas capable of surviving salinities from 4 to 52‰, and Tigriopus fulvus adapted to 4.2 to 90‰.

  • Sedimentary Shore’s Impact: Salinity fluctuations are less extreme, allowing for different species compositions and behaviors.

  • Infaunal Organisms: Most organisms in these areas are infaunal, buffered from environmental extremes due to interstitial water retention, although they face other challenges.