Fourier Transform Properties, Symmetry, and Energy Analysis

Fourier Transform Definition and Recapitulation

  • Fourier Transform Notation and Formula

    • The Fourier Transform of a signal x(t)x(t) is denoted as X(ω)=F(x(t))X(\omega) = \mathcal{F}(x(t)).
    • It is mathematically defined by the following integral:   X(ω)=∫−∞∞x(t)e−jωtdtX(\omega) = \int_{-\infty}^{\infty} x(t)e^{-j\omega t} dt
  • Inverse Fourier Transform (IFT)

    • To recover the time-domain signal x(t)x(t) from its frequency-domain representation X(ω)X(\omega), the Inverse Fourier Transform is used:   F−1(X(ω))=x(t)=12π∫−∞∞X(ω)ejωtdω\mathcal{F}^{-1}(X(\omega)) = x(t) = \frac{1}{2\pi} \int_{-\infty}^{\infty} X(\omega) e^{j\omega t} d\omega

Dirichlet Conditions for Existence

  • Primary Requirements

    • For the Fourier Transform of a function x(t)x(t) (a signal) to exist, the function must satisfy three specific criteria known as the Dirichlet conditions:
    1. Absolute Integrability: The signal must be absolutely integrable over the infinite range:     ∫−∞∞∣x(t)∣dt<∞\int_{-\infty}^{\infty} |x(t)| dt < \infty
    2. Finite Extrema: The function x(t)x(t) must possess a finite number of maxima and minima within any finite interval.
    3. Finite Discontinuities: The function x(t)x(t) must have a finite number of points of discontinuity.
  • Practical Application in Engineering

    • The Dirichlet conditions technically exclude certain useful functions defined over −∞<t<∞-\infty < t < \infty that do not decay, such as:
    • Constant functions: f(t)=af(t) = a
    • Growing exponentials: f(t)=eαtf(t) = e^{\alpha t}
    • Decaying exponentials (if defined over an infinite range without boundaries): f(t)=e−αtf(t) = e^{-\alpha t}
    • Sinusoidal functions: f(t)=sin⁡(t)f(t) = \sin(t)
    • However, in practical Engineering, we observe that no real-world signal has an infinite value or lasts forever. Therefore, for all physical signals, we can assume that the Fourier Transform will always exist.

Fundamental Properties of the Fourier Transform

  • Linearity

    • The Fourier Transform is a linear operator. If X(ω)=F(x(t))X(\omega) = \mathcal{F}(x(t)) and Y(ω)=F(y(t))Y(\omega) = \mathcal{F}(y(t)), and we define a signal z(t)z(t) as a weighted sum z(t)=A⋅x(t)+B⋅y(t)z(t) = A \cdot x(t) + B \cdot y(t), then:   Z(ω)=F(z(t))=∫−∞∞(A⋅x(t)+B⋅y(t))e−jωtdtZ(\omega) = \mathcal{F}(z(t)) = \int_{-\infty}^{\infty} (A \cdot x(t) + B \cdot y(t)) e^{-j\omega t} dt
    • Distributing the integral gives:   Z(ω)=A∫−∞∞x(t)e−jωtdt+B∫−∞∞y(t)e−jωtdtZ(\omega) = A \int_{-\infty}^{\infty} x(t) e^{-j\omega t} dt + B \int_{-\infty}^{\infty} y(t) e^{-j\omega t} dt
    • Thus, the property is confirmed:   Z(ω)=AX(ω)+BY(ω)Z(\omega) = AX(\omega) + BY(\omega)
  • Differentiation in the Time Domain

    • Taking the Fourier Transform of the derivative of a function results in multiplying the original transform by jωj\omega.
    • Proof Steps:
    • Start with the definition of the Inverse Fourier Transform: x(t)=12π∫−∞∞X(ω)ejωtdωx(t) = \frac{1}{2\pi} \int_{-\infty}^{\infty} X(\omega) e^{j\omega t} d\omega
    • Differentiate both sides with respect to time (tt):     dx(t)dt=ddt[12π∫−∞∞X(ω)ejωtdω]\frac{dx(t)}{dt} = \frac{d}{dt} [ \frac{1}{2\pi} \int_{-\infty}^{\infty} X(\omega) e^{j\omega t} d\omega ]
    • Move the derivative inside the integral:     dx(t)dt=12π∫−∞∞X(ω)ddt(ejωt)dω=12π∫−∞∞jωX(ω)ejωtdω\frac{dx(t)}{dt} = \frac{1}{2\pi} \int_{-\infty}^{\infty} X(\omega) \frac{d}{dt} (e^{j\omega t}) d\omega = \frac{1}{2\pi} \int_{-\infty}^{\infty} j\omega X(\omega) e^{j\omega t} d\omega
    • Conclusion:   F(dx(t)dt)=jωX(ω)\mathcal{F}(\frac{dx(t)}{dt}) = j\omega X(\omega)
  • Frequency Shift (First Shift Theorem)

    • If we multiply a time-domain signal x(t)x(t) by a complex exponential ejΩte^{j\Omega t}, where Ω\Omega is a constant frequency shift, the spectrum shifts in the frequency domain.
    • Derivation:
    • Let XΩ(ω)=F(x(t)⋅ejΩt)X_{\Omega}(\omega) = \mathcal{F}(x(t) \cdot e^{j\Omega t})XΩ(ω)=∫−∞∞x(t)⋅ejΩte−jωtdt=∫−∞∞x(t)e−j(ω−Ω)tdtX_{\Omega}(\omega) = \int_{-\infty}^{\infty} x(t) \cdot e^{j\Omega t} e^{-j\omega t} dt = \int_{-\infty}^{\infty} x(t) e^{-j(\omega - \Omega)t} dt
    • This integral is identical to the definition of the Fourier Transform, but with ω\omega replaced by (ω−Ω)(\omega - \Omega).
    • Result: F(x(t)ejΩt)=X(ω−Ω)\mathcal{F}(x(t)e^{j\Omega t}) = X(\omega - \Omega)
    • This property is fundamental to the understanding of Modulation, where multiplying a signal by a carrier frequency shifts that signal to a higher frequency band.
  • Time Shift (Second Shifting Theorem)

    • Shifting a signal in the time domain results in a phase shift in the frequency domain.
    • If x(t+τ)x(t + \tau) represents a signal shifted to the left (advanced) by τ\tau seconds, its Fourier Transform Xτ(ω)X_{\tau}(\omega) is calculated as:
    • Let t′=t+τt' = t + \tau, which implies t=t′−τt = t' - \tau and dt=dt′dt = dt'Xτ(ω)=∫−∞∞x(t′)e−jω(t′−τ)dt′X_{\tau}(\omega) = \int_{-\infty}^{\infty} x(t') e^{-j\omega(t' - \tau)} dt'
    • Factoring out the constant term:     Xτ(ω)=ejωτ∫−∞∞x(t′)e−jωt′dt′X_{\tau}(\omega) = e^{j\omega\tau} \int_{-\infty}^{\infty} x(t') e^{-j\omega t'} dt'
    • Conclusion: F(x(t+τ))=ejωτX(ω)\mathcal{F}(x(t + \tau)) = e^{j\omega\tau} X(\omega)

Symmetry in the Fourier Transform

  • Real vs. Imaginary Components

    • For a purely real signal x(t)x(t), the Fourier Transform X(ω)X(\omega) can be split into Real (R(ω)R(\omega)) and Imaginary (I(ω)I(\omega)) parts:   X(ω)=∫−∞∞x(t)(cos⁡(ωt)−jsin⁡(ωt))dt=R(ω)+jI(ω)X(\omega) = \int_{-\infty}^{\infty} x(t) (\cos(\omega t) - j\sin(\omega t)) dt = R(\omega) + jI(\omega)
    • Where:
    • R(ω)=∫−∞∞x(t)cos⁡(ωt)dtR(\omega) = \int_{-\infty}^{\infty} x(t) \cos(\omega t) dt
    • I(ω)=−∫−∞∞x(t)sin⁡(ωt)dtI(\omega) = -\int_{-\infty}^{\infty} x(t) \sin(\omega t) dt
  • Even and Odd Signal Symmetry

    • Even Functions: If x(t)x(t) is an even function, the product x(t)⋅sin⁡(ωt)x(t) \cdot \sin(\omega t) is an odd function. Since an odd function integrated over symmetrical limits (−∞-\infty to ∞\infty) is zero, I(ω)=0I(\omega) = 0. Therefore, the Fourier Transform of an even function is purely real.
    • Odd Functions: If x(t)x(t) is an odd function, the Fourier Transform is purely imaginary.
    • General Real Signals:
    • The Real part is even: R(−ω)=R(ω)R(-\omega) = R(\omega)
    • The Imaginary part is odd: I(−ω)=−I(ω)I(-\omega) = -I(\omega)
  • Magnitude and Phase Symmetry

    • Magnitude: ∣X(ω)∣=R2(ω)+I2(ω)|X(\omega)| = \sqrt{R^2(\omega) + I^2(\omega)}, which is an even function (∣X(−ω)∣=∣X(ω)∣|X(-\omega)| = |X(\omega)|).
    • Phase: θ(ω)=tan⁡−1(I(ω)R(ω))\theta(\omega) = \tan^{-1}(\frac{I(\omega)}{R(\omega)}), which is an odd function (θ(−ω)=−θ(ω)\theta(-\omega) = -\theta(\omega)).
  • Complex Conjugate Symmetry

    • For any real signal x(t)x(t), the Fourier Transform satisfies:   X(−ω)=X∗(ω)X(-\omega) = X^*(\omega)

Energy and Parseval’s Theorem

  • Total Energy Equation

    • For an aperiodic signal f(t)f(t) defined over −∞<t<∞-\infty < t < \infty, the total energy EE is:   E=∫−∞∞∣f(t)∣2dtE = \int_{-\infty}^{\infty} |f(t)|^2 dt
  • Parseval’s Theorem

    • This theorem allows the energy to be calculated in either the time or frequency domain:   E=∫−∞∞∣f(t)∣2dt=12π∫−∞∞∣F(ω)∣2dωE = \int_{-\infty}^{\infty} |f(t)|^2 dt = \frac{1}{2\pi} \int_{-\infty}^{\infty} |F(\omega)|^2 d\omega
    • Derivation Note: This is achieved by substituting the Inverse Fourier Transform for one of the f(t)f(t) terms and changing the order of integration.
  • Energy Spectral Density (ESD)

    • The term ∣F(ω)∣2|F(\omega)|^2 is a purely real quantity known as the Energy Spectral Density of f(t)f(t).
    • Spectral: It represents the spread of energy across different frequencies.
    • Density: Integrating this over all frequencies provides the total energy.
    • An Energy Spectrum is the graph plotting ∣F(ω)∣2|F(\omega)|^2 against ω\omega.

Worked Example: One-Sided Exponential

  • Signal Definition

    • Consider the signal f(t)=u(t)⋅e−αtf(t) = u(t) \cdot e^{-\alpha t}, where u(t)u(t) is the unit step function.
  • Step 1: Finding the Fourier TransformF(ω)=∫0∞e−αte−jωtdt=∫0∞e−(α+jω)tdtF(\omega) = \int_{0}^{\infty} e^{-\alpha t} e^{-j\omega t} dt = \int_{0}^{\infty} e^{-(\alpha + j\omega)t} dt

    • Evaluating the integral:   F(ω)=[−e−(α+jω)tα+jω]0∞=0−(−1α+jω)=1α+jωF(\omega) = [ -\frac{e^{-(\alpha + j\omega)t}}{\alpha + j\omega} ]_{0}^{\infty} = 0 - (-\frac{1}{\alpha + j\omega}) = \frac{1}{\alpha + j\omega}
  • Step 2: Calculating Energy Directly (Time Domain)E=∫0∞(e−αt)2dt=∫0∞e−2αtdt=[−e−2αt2α]0∞=12αE = \int_{0}^{\infty} (e^{-\alpha t})^2 dt = \int_{0}^{\infty} e^{-2\alpha t} dt = [ -\frac{e^{-2\alpha t}}{2\alpha} ]_{0}^{\infty} = \frac{1}{2\alpha}

  • Step 3: Calculating Energy via Parseval’s Theorem (Frequency Domain)

    • First, find the magnitude squared: ∣F(ω)∣2=1α2+ω2|F(\omega)|^2 = \frac{1}{\alpha^2 + \omega^2}
    • Using Parseval's formula:   E=12π∫−∞∞1ω2+α2dωE = \frac{1}{2\pi} \int_{-\infty}^{\infty} \frac{1}{\omega^2 + \alpha^2} d\omega
    • Referring to mathematical tables, the integral form is 1atan⁡−1(xa)\frac{1}{a} \tan^{-1}(\frac{x}{a}):   E=12π[1αtan⁡−1(ωα)]−∞∞=12π⋅1α[π2−(−π2)]=12π⋅πα=12αE = \frac{1}{2\pi} [ \frac{1}{\alpha} \tan^{-1}(\frac{\omega}{\alpha}) ]_{-\infty}^{\infty} = \frac{1}{2\pi} \cdot \frac{1}{\alpha} [ \frac{\pi}{2} - (-\frac{\pi}{2}) ] = \frac{1}{2\pi} \cdot \frac{\pi}{\alpha} = \frac{1}{2\alpha}
    • Both methods yield the identical result: E=12αE = \frac{1}{2\alpha}.

Power and the Fourier Transform

  • Finite Power Signals
    • Signals that do not have finite energy (energy E→∞E \rightarrow \infty) may still have finite average power PP. This is typical for periodic signals like sin⁡(Ωt)\sin(\Omega t) or the unit step function u(t)u(t).
    • The average power is defined as:   P=lim⁡T→∞1T∫−T/2T/2∣f(t)∣2dtP = \lim_{T \rightarrow \infty} \frac{1}{T} \int_{-T/2}^{T/2} |f(t)|^2 dt

Summary of Topics Covered

  • Dirichlet Conditions: Criteria for FT existence.
  • Fourier Transform Properties: Linearity, Time-Differentiation, Frequency Shifting, and Time Shifting.
  • Symmetry: Behavior of transforms for real, even, and odd signals.
  • Energy Relations: Using Parseval's Theorem to link time and frequency energy.
  • Introduction to Modulation: Frequency shifting concepts apply directly to Amplitude Modulation (AM) and Demodulation.