Comprehensive Biology Section B Experiment Study Guide

Biology Section B: Question 8 Overview

  • Required Experiments for Question 8: This section must be based on eight specific experiments:     * Tests for starch, lipids, proteins, and reducing sugars.     * Use of simple keys to identify 5 fauna and 5 flora.     * Use of different apparatus to collect plants and animals.     * Quantitative surveys of plants and animals.     * Investigation of three abiotic factors.     * Familiarity and usage of a light microscope.     * Preparation and examination of plant and animal cells.     * Isolation of DNA from a plant tissue.

Qualitative Food Tests

  • Test for Starch:     * Method: Add a few drops of iodine to food (e.g., bread or pasta). Use a pestle and mortar to grind the food with water if necessary. Use a second test tube of water as a control.     * Positive Result: Colour change from yellow/brown to blue/black.     * Negative Result (Control): Iodine stays yellow/brown.     * Exam Questions: 1) Name the reagent (Iodine) and state its colour (Yellow/Brown). 2) Positive result colour (Blue/Black). 3) Control (Water). 4) Colour of control (Yellow/Brown).

  • Test for Fat (Lipids):     * Method: Add food (e.g., butter) to brown paper. Repeat with drops of water for the control. Leave to dry in a warm place.     * Positive Result: A permanent translucent stain forms.     * Negative Result (Control): No permanent stain.     * Exam Questions: 1) Substance used (Brown paper). 2) Result indicating lipids (Permanent translucent stain). 3) Control (Water on brown paper). 4) Result of control (Stain disappears upon drying).

  • Test for Reducing Sugar (Glucose) — Benedict’s Test:     * Method: Dissolve glucose in water. Add Benedict’s solution (blue) to the sample and the water control. Apply heat (do not boil) for a few minutes.     * Positive Result: Colour change from blue to brick red.     * Negative Result (Control): Remains blue.     * Important Note: All monosaccharides are reducing sugars; some disaccharides (maltose) are reducing sugars, but sucrose is not.     * Exam Questions: 1) Indicator (Benedict’s solution, blue). 2) Is heat required? (Yes). 3) Positive result (Brick red). 4) Control (Water). 5) Control colour (Blue).

  • Test for Protein (Biuret Test):     * Method: Place milk into a test tube. Add drops of sodium hydroxide (colourless) then copper sulfate (blue). Repeat with water for the control.     * Positive Result: Colour change from blue to purple.     * Negative Result (Control): Remains blue.     * Exam Questions: 1) Protein source (Milk). 2) Reagents (Sodium hydroxide and copper sulfate) and colour (Blue). 3) Positive result (Purple). 4) Control (Water). 5) Control colour (Blue).

Study of a Grassland Ecosystem

  • Terminology:     * Fauna: Animals present in an ecosystem.     * Flora: Plants present in an ecosystem.     * Identification Key: A tool used to identify plants and animals.

  • Species Identification (Grassland Survey):     * Five Fauna (Animals): Snail, Ladybird, Spider, Blackbird, Earthworm.     * Five Flora (Plants): Meadow sweet, Nettles, Buttercup, Daisy, Blue bells.

  • Simple Identifying Features for Flora (Key Example):     * Coloured Flowers vs. Flowers lacking colour.     * Sting (Nettle) vs. No sting (Meadow sweet).     * Blue flower (Bluebells), white flower (Daisy), yellow flower (Buttercup).

  • Identification Activity Keys:     * Invertebrate Identification:         1. Wings absent: 14 legs (Woodlouse) vs. six legs (Beetle).         2. Wings present: Shades of red (Peacock butterfly) vs. Bands of yellow (Bumblebee).     * Vertebrate Identification:         1. Four legs: Brown and white (Stoat) vs. Dark brown/black (Mink).         2. Two legs: Blue and white head (Blue tit) vs. Black and white head (Coal tit).     * Plant Kingdom Key (Taxonomy):         * With flower (Angiosperms) vs. Without flower.         * Seedless vs. Seed bearing (Gymnosperms).         * Body not differentiated (Algae, Fungi) vs. Body differentiated (Mosses, Ferns).         * Algae: Differentiated body, lacks vascular tissue, has photosynthetic pigments.         * Fern: Differentiated body, has vascular tissues.

Apparatus for Collecting Organisms

  • Pooter: Used to collect small insects and spiders by inhaling through a tube with gauze.
  • Sweep net: Used to collect insects from long grass.
  • Plankton net: Pulled through water to collect plankton.
  • Beating tray: Placed under a bush/tree which is then shaken; collects insects, beetles, and worms.
  • Pitfall trap: Placed in soil for 24 hours to collect snails, slugs, and worms.
  • Tullgren funnel: Uses heat from a light to drive insects out of soil/litter and into a collection pot.
  • Baerman funnel: Similar to Tullgren; uses heat to drive organisms from saturated soil into a jar of water.
  • Mammal trap: Small animals enter and are trapped (e.g., mice).
  • Cryptozoic trap: Placed on soil for several days; collects organisms preferring moist, dark conditions.

Quantitative Survey of Plants

  • Quantitative vs. Qualitative:     * Quantitative: Provides the specific numbers of organisms present.     * Qualitative: Only states if an organism is present or absent.

  • Calculating Percentage Cover (Objective Estimate):     1. Place a quadrat randomly (e.g., by throwing a pencil over the shoulder to prevent bias).     2. Repeat 10 times to ensure reliability.     3. Count intersection points where plants touch within the quadrat.     4. Formula: Percentage Cover=Number of touchesNumber of squares×1001\text{Percentage Cover} = \frac{\text{Number of touches}}{\text{Number of squares}} \times \frac{100}{1}

  • Calculating Percentage Frequency:     1. Use a square quadrat (0.5 m0.5\,m per side).     2. Randomly place/throw the quadrat 10 times.     3. Record presence or absence of a species in each throw.     4. Formula: Frequency=Number of quadrats where species is present10×1001\text{Frequency} = \frac{\text{Number of quadrats where species is present}}{10} \times \frac{100}{1}     5. Example: If found in 3 out of 10 quadrats, frequency is 30%30\%.

  • Disadvantages of Quadrat: Cannot be used for animals or very large plants.

  • Importance of Identification: Monitoring biodiversity, conservation, preventing extinction, monitoring water quality (pollution).

  • Survey Errors: Sample area too small (not reflective), Human error/misidentification (misjudging estimation), Changing seasons (hibernating or seasonal organisms), Accidental discovery (rare animals not common to the habitat).

Quantitative Survey of Animals (Capture-Recapture Method)

  • Procedure (e.g., for Mice or Hares):     1. Capture a number of animals using a mammal trap.     2. Mark each organism (tag or ring) without harming them or making them more visible to predators.     3. Release them back into the capture area.     4. Return later (allow time for marked animals to mix with unmarked ones) and capture a similar number of animals.     5. Record how many in the second capture were already marked.     6. Formula: Total Number=C1st×C2ndM2nd\text{Total Number} = \frac{C_{\text{1st}} \times C_{\text{2nd}}}{M_{\text{2nd}}}         * C1stC_{\text{1st}}: Number caught and marked on 1st visit.         * C2ndC_{\text{2nd}}: Total number caught on 2nd visit.         * M2ndM_{\text{2nd}}: Number marked in the 2nd visit.

Abiotic Factors (Non-living)

  • Aspect: Identified using a compass; affects light intensity and temperature (higher on south-facing slopes).
  • Air Temperature: Measured using a thermometer.
  • Wind Speed/Direction: Measured using an anemometer and a wind gauge.
  • Soil pH: Recorded using a pH meter or universal indicator.
  • Light Intensity: Measured using a light meter.

Microscopy and Cell Preparation

  • Light Microscope Parts & Functions:     * Eyepiece: Magnifies the image.     * Objective lens: Magnifies the image.     * Coarse adjustment: For rough focusing.     * Fine adjustment: For precise focusing.     * Nose piece: Rotates to change objective lenses.     * Stage/Stage clips: Holds the slide in place.     * Diaphragm/Condenser: Controls/focuses light through the slide.

  • Magnification Formula: Total Magnification=Eyepiece Magnification×Objective Magnification\text{Total Magnification} = \text{Eyepiece Magnification} \times \text{Objective Magnification}

  • Example Calculation: If eyepiece is x15x15 and objective is x50x50, and image diameter is 2 mm2\,mm: Total Magnification=15×50=750\text{Total Magnification} = 15 \times 50 = 750. Actual diameter = 2 mm750\frac{2\,mm}{750}.

  • Microscope Steps:     1. Place slide on stage; clip it.     2. Light on.     3. Focus low power lens with coarse knob.     4. Switch to high power and use fine focus knob.

  • Preparing a Plant Cell (Onion Epidermis):     1. Use forceps to pull thin epidermis from inner leaf.     2. Place on slide with iodine (stains nucleus orange/cytoplasm yellow).     3. Add water (prevents drying).     4. Lower coverslip at an angle (prevents air bubbles, protects lens).

  • Preparing an Animal Cell (Cheek Cell):     1. Rinse mouth; scrape inside with a cotton bud.     2. Spread thinly on slide.     3. Add methylene blue (stains nucleus dark blue/cytoplasm light blue).     4. Add water and a coverslip at an angle.

Isolation of DNA from Plant Tissue (Kiwi or Onion)

  • Procedure & Rationales:     1. Chop tissue: Increases surface area for chemicals.     2. Add washing up liquid & salt (Sodium Chloride) in distilled water: Liquid breaks cell and nuclear membranes; salt causes DNA to clump.     3. Water bath (60oC60^{\text{o}}C for 15 minutes): Denatures enzymes that digest DNA. Note: Over 15 mins destroys DNA.     4. Ice-cold water bath (5 minutes): Slows DNA breakdown.     5. Blender (3 seconds): Breaks cell walls. Note: Over 3 seconds breaks DNA.     6. Filter (Coffee filter paper): DNA and proteins pass through; large debris remains (normal filter paper is too slow).     7. Add Protease: Breaks down proteins associated with DNA.     8. Ice-cold Ethanol: Added slowly down the side; DNA is insoluble in cold alcohol and floats to the top as white threads.     9. Extract: DNA attaches to a glass rod when twisted.

Questions & Discussion

  • Q: What is a protease enzyme and why is it necessary?     * A: Protease is an enzyme that breaks down protein. It is necessary to digest the proteins that DNA is wrapped around.
  • Q: Why was the solution filtered?     * A: To allow DNA and protein to pass into the filtrate while removing cellular debris.
  • Q: What was the purpose of the blender?     * A: To break the cell walls of the plant tissue.
  • Q: Under what condition is the ethanol used?     * A: It must be freezer/ice-cold.