Spectroscopy and Structural Elucidation: UV-Vis Spectroscopy Study Notes

Introduction to Spectroscopy

  • Spectroscopy Definition: A branch of physical science studying the interaction between molecules and electromagnetic radiation (EMR). It involves producing, detecting, and analyzing spectra of EMR.
  • Energy Quantization: The most significant consequence of spectroscopy is that energy is absorbed or emitted in discrete amounts known as quanta.
  • The Electromagnetic Spectrum: Divided into regions based on wavelength:     * Gamma Rays: 0.0001 nm0.0001\,nm     * X-Rays: 0.01 nm0.01\,nm     * UltraViolet (UV): 10 nm10\,nm     * Visible Light: 400−800 nm400-800\,nm     * Infrared (IR): 10000 nm10000\,nm     * Radar/TV: 1 cm1\,cm     * FM Radio: 1 m1\,m     * AM Radio: 100 m100\,m
  • Major Types of Spectroscopy:     * X-Ray Absorption Spectroscopy: Interaction with X-rays.     * UV/Visible Absorption Spectroscopy: Interaction with UV-Visible light.     * Infrared Absorption Spectroscopy: Interaction with IR radiation.     * Nuclear Magnetic Resonance (NMR) Spectroscopy: Interaction with radio waves.

UltraViolet-Visible (UV-Vis) Spectroscopy Foundations

  • Electronic Spectroscopy: UV-Vis is often called electronic spectroscopy because the absorption of UV radiation causes electrons to undergo excitation, promoting them from a ground state (low energy) to an excited state (high energy).
  • UV-Vis Spectrum Regions: Generally occurs due to EMR absorption in the range of 100 nm100\,nm to 800 nm800\,nm.     * Far (Vacuum) UV Region (100−200 nm100-200\,nm): Characterized by atomic absorption below 200 nm200\,nm. It requires a vacuum to study as air absorbs in this region, hence the name "vacuum-UV."     * Near UV Region (200−400 nm200-400\,nm): Characteristics include absorption due to p\text{p} and d\text{d} electronic transitions.     * Visible Region (400−800 nm400-800\,nm): Absorption occurs here if there are a sufficient number of π\pi bonds in conjugation.

Theory of Absorption and Laws

  • Beer-Lambert Law: Relates the absorbance (AA) of a band to sample thickness and concentration.     * Absorbance (AA): The negative logarithm of transmittance (TT). Formula: A=−log⁡10TA = -\log_{10}T.     * Governing Formula: A=ϵλcbA = \epsilon \lambda cb (where ϵ\epsilon is the molar absorption coefficient, cc is concentration, and bb is path length).     * Path Length (bb): Measured in cmcm.     * Concentration (cc): Measured in mol dm−3mol\,dm^{-3}.     * Molar Absorption Coefficient (ϵ\epsilon): Measurement units are dm3 mol−1 cm−1dm^3\,mol^{-1}\,cm^{-1}.
  • Key Parameters:     * λmax\lambda_{max} Value: The wavelength at which maximum absorption occurs. It corresponds to the specific energy required for an electronic transition. Different transitions yield different λmax\lambda_{max} values.     * ϵmax\epsilon_{max} Value: Known as molar absorptivity or molar extinction coefficient. It measures the extent or intensity of absorption and is characteristic of a compound at a specific wavelength.

Electronic Transitions and Molecular Orbitals

  • Molecular Orbital Concepts:     * HOMO (Highest Occupied Molecular Orbital): The highest energy orbital occupied by electrons.     * LUMO (Lowest Unoccupied Molecular Orbital): The lowest energy orbital not occupied by electrons.     * Electronic Excitation: When subjected to UV light, electrons move from the HOMO to the LUMO.
  • Types of Allowed Transitions:     1. Bonding to Anti-bonding Orbitals:         * σ→σ∗\sigma \rightarrow \sigma^*: Requires large energy, absorbing in the Far UV region (120−200 nm120-200\,nm). Found in saturated hydrocarbons with only σ\sigma bonds (e.g., CH4,CH3CH2CH3,C6H14CH_4, CH_3CH_2CH_3, C_6H_{14}).         * π→π∗\pi \rightarrow \pi^*: Occurs in compounds with double/triple bonds, aromatic rings, carbonyl groups, and diazo groups (150−250 nm150-250\,nm).     2. Non-bonding Orbitals Transition:         * n→π∗n \rightarrow \pi^*: Occurs in compounds possessing double bonds with a heteroatom (e.g., aldehydes and ketones).         * n→σ∗n \rightarrow \sigma^*: Excitation of an unshared electron on a heteroatom (Oxygen, Nitrogen, etc.) to an anti-bonding σ\sigma orbital. Requires less energy than σ→σ∗\sigma \rightarrow \sigma^*, resulting in absorption at higher wavelengths.

Chromophores and Auxochromes

  • Chromophore: An isolated functional group (covalently unsaturated) capable of absorbing radiation in the 200−800 nm200-800\,nm range. It is responsible for electronic transitions. Examples: C=C,C≡C,C=N,C≡N,C=O,N=NC=C, C\equiv C, C=N, C\equiv N, C=O, N=N. Compounds containing them are called Chromogens.     * Example: Carotene has many conjugated double bonds, allowing π→π∗\pi \rightarrow \pi^* transitions at 440 nm440\,nm.
  • Auxochrome: A functional group (e.g., −OH,−NO2,−NH2-OH, -NO_2, -NH_2) that interacts with a chromophore, shifting absorption to a higher wavelength (lower frequency) and increasing color intensity. Known as "color enhancing" groups.     * Example: Benzene has λmax\lambda_{max} at 256 nm256\,nm, but Aniline (benzene + −NH2-NH_2 auxochrome) has λmax\lambda_{max} at 280 nm280\,nm.

Absorption and Chemical Shifts

  • Chemical Shift: Deviation from standard absorption positions due to solvents or other substances.
  • Shift Related to Wavelength:     * Bathochromic Shift (Red Shift): Shift toward longer wavelengths (lower frequency). Caused by change in medium, presence of an auxochrome, or solvent changes. In carbonyls, n→π∗n \rightarrow \pi^* transitions experience a red shift when solvent polarity decreases.     * Hypsochromic Shift (Blue Shift): Shift toward shorter wavelengths (higher frequency). Caused by change in medium or removal of conjugation. Example: Aniline (280 nm280\,nm) shifts to 203 nm203\,nm in acid solution due to the formation of anilinium ions.
  • Shift Related to Molar Absorptivity (ϵ\epsilon):     * Hyperchromic Shift: Increase in absorption intensity. Often caused by increased conjugation.     * Hypochromic Shift: Decrease in absorption intensity. Often caused by decreased conjugation.

Factors Affecting Absorption Band Position

  • Conjugation: As the number of conjugated double bonds increases, λmax\lambda_{max} increases because less energy is required for electronic transitions. Conjugation also increases intensity (molar absorptivity).     * Example: β\beta-carotene has 11 conjugated double bonds, shifting absorption to the blue region (λmax=455 nm\lambda_{max} = 455\,nm), reflecting an orange color.
  • Solvent Polarity: Solvents should not absorb in the investigation area and should ideally be less polar to minimize interaction with solute molecules.     * Ethanol (95%): Most common solvent. Inexpensive, high dissolving power, and transparent above 210 nm210\,nm.     * Solvent Limits (nmnm):         * Water: 205 nm205\,nm         * Ethanol/Hexane/Cyclohexane: 210 nm210\,nm         * Chloroform: 245 nm245\,nm         * Carbon Tetrachloride: 265 nm265\,nm         * Benzene: 280 nm280\,nm     * Solvent Effect Example: Acetone in cyclohexane (λmax=360 nm\lambda_{max} = 360\,nm) vs. Acetone in ethanol (λmax=400.5 nm\lambda_{max} = 400.5\,nm).

Woodward-Fieser Rules for Dienes

  • General Formula: λmax=Base value+∑Substituent Contributions+∑Other Contributions\lambda_{max} = \text{Base value} + \sum \text{Substituent Contributions} + \sum \text{Other Contributions}.
  • Base (Parent) Values:     * Acyclic Conjugated Diene: 217 nm217\,nm     * Heteroannular Conjugated Diene (Double bonds in different rings): 214 nm214\,nm     * Homoannular Conjugated Diene (Double bonds in the same ring): 253 nm253\,nm
  • Structural Definitions:     * S-cis (Cisoid): Two double bonds on the same side of the single bond.     * S-trans (Transoid): Two double bonds on opposite sides of the single bond.     * Exocyclic Double Bond: One double-bonded atom is part of a ring or the bond is immediately outside a ring (Adds +5 nm+5\,nm).     * Endocyclic Double Bond: Double bond fully present within a ring.     * Extended Conjugation: Additional double bonds in the conjugated system (Adds +30 nm+30\,nm per bond).
  • Substituent Increments:     * Alkyl Substituent or Ring Residue: +5 nm+5\,nm     * Alkoxy (-OR): +6 nm+6\,nm     * Halogens (Cl, Br): +5 nm+5\,nm     * Secondary Amine (NR2): +60 nm+60\,nm     * Exocyclic double bond to 1 ring: +5 nm+5\,nm     * Exocyclic double bond to 2 rings: +10 nm+10\,nm

Woodward-Fieser Rules for α,β\alpha, \beta-Unsaturated Carbonyls

  • Base Values for Enones:     * Acyclic or 6-membered cyclic enones: 215 nm215\,nm     * 5-membered cyclic enones: 202 nm202\,nm
  • Substituent Increments (Variation by Position):     * Alkyl group/Ring residue at α\alpha position: +10 nm+10\,nm     * Alkyl group/Ring residue at β\beta position: +12 nm+12\,nm     * Alkyl group/Ring residue at γ\gamma or δ\delta position: +18 nm+18\,nm
  • Other Increments:     * Double bond extending conjugation: +30 nm+30\,nm     * Exocyclic double bond: +5 nm+5\,nm

Calculation Examples

  • Example 1: 2,4-Hexadiene (Acyclic):     * Base value: 217 nm217\,nm     * 2 alkyl substituents: 2×5=10 nm2 \times 5 = 10\,nm     * Total: 227 nm227\,nm (Observed: 227 nm227\,nm).
  • Example 2: 1,4-dimethylcyclohex-1,3-diene:     * Parent (Homoannular): 253 nm253\,nm     * 2 alkyl substituents: 2×5=10 nm2 \times 5 = 10\,nm     * 2 ring residues: 2×5=10 nm2 \times 5 = 10\,nm     * Total Calculated: 273 nm273\,nm (Observed: 263 nm263\,nm).
  • Example 3: (CH3)2−C=CH−COCH3(CH_3)_2-C=CH-COCH_3 (Acyclic enone):     * Base value: 215 nm215\,nm     * 2 β\beta substituents: 2×12=24 nm2 \times 12 = 24\,nm     * Total: 239 nm239\,nm (Observed: 237 nm237\,nm).