Physics 11: Chapter I - Detailed Notes on Simple Harmonic Motion

Overview of Mechanical Vibration

  • Mechanical Vibration (Dao động cơ):

    • Defined as movement that is limited in space and is repeated regularly around a stable equilibrium position.

    • Equilibrium Position (Vị trí cân bằng - 0): This is the initial stationary position of the object before any movement or disturbance occurs.

    • Movement Classification: Mechanical vibration can be categorized as either periodic (tuần hoàn) or non-periodic (không tuần hoàn).

  • Periodic Vibration (Dao động tuần hoàn):

    • This is a type of vibration where the state of the object's vibration (position and direction) is repeated exactly as it was after equal intervals of time.

    • Simplest Form: Simple Harmonic Motion (Dao động điều hòa) is identified as the simplest form of periodic vibration.

Fundamental Parameters of Vibration: Period and Frequency

  • Period (Chu kì):

    • Definition: The time required for an object to complete one full circle or one full oscillation (dao động toàn phần).

    • Equivalence: 1 full circle is equivalent to 1 full oscillation.

    • Symbol: TT

    • Unit: Seconds (ss)

  • Frequency (Tần số):

    • Definition: The number of full circles or full oscillations performed by the object in exactly one second (1 s1\,s).

    • Symbol: ff

    • Unit: circles per second, also documented as Hertz (HzHz).

    • Example Scenario:

      • If T=0.5 sT = 0.5\,s, this means 1 circle is completed in 0.5 s0.5\,s.

      • In 1 s1\,s, the object will complete 2 circles.

      • Therefore, f=2 Hzf = 2\,Hz.

  • Relationship between Period and Frequency:

    • There is an inverse relationship between the two constants:

    • T=1fT = \frac{1}{f}

    • f=1Tf = \frac{1}{T}

The Relationship Between Uniform Circular Motion and SHM

Core Principle: The projection (hình chiếu) of a point moving in uniform circular motion onto its diameter is considered a Simple Harmonic Motion.

  • Mathematical Setup:

    • Consider a point mass moving in a uniform circle with a constant angular speed (ω\omega).

    • The circle has a radius R=AR = A.

    • Reference Point: CC is chosen as the origin on the circle.

    • Direction of Rotation: The positive direction is defined as counter-clockwise (ngược chiều kim đồng hồ).

    • Initial State (t=0t=0): The point mass is at position M0M_0, which is defined by the initial angle ϕ\phi.

    • State at time (tt): The point mass reaches position MM. The radius will have swept an additional angle calculated as:

      • Angle M0OM=Δφ=ω×t\text{Angle } M_0OM = \Delta \varphi = \omega \times t

      • This calculation mirrors the formula for distance in linear motion: s=v×ts = v \times t.

    • Total Particle Angle: The position MM is defined by the angle relative to the origin CC:

      • ∠MOC=ωt+ϕ\angle MOC = \omega t + \phi

  • Deriving the Equation:

    • Project point MM down to the axis OxOx to find point PP.

    • Let OP=xOP = x.

    • Since OC=OM=R=AOC = OM = R = A:

    • OPOM=xA=cos⁡(∠POM)=cos⁡(ωt+ϕ)\frac{OP}{OM} = \frac{x}{A} = \cos(\angle POM) = \cos(\omega t + \phi)

    • Resulting in the Displacement Equation: x=Acos⁡(ωt+ϕ)x = A \cos(\omega t + \phi)

Definition and Components of the SHM Equation

  • Formal Definition of SHM (ĐN): Simple Harmonic Motion is a periodic oscillation where the displacement is described as a function of time using either a sine or cosine operator: x=Acos⁡(ωt+ϕ)x = A \cos(\omega t + \phi).

  • Variables in the Equation:

    • xx (Displacement / Li độ): This represents the deviation of the vibrating object from the equilibrium position at a specific time tt.

    • AA (Amplitude / Biên độ):

      • Represents the maximum displacement from the equilibrium position (xmax=Ax_{max} = A).

      • It denotes the boundaries of the displacement (−A≤x≤A-A \leq x \leq A).

      • Positive Limit (Biên dương): +A+A

      • Negative Limit (Biên âm): −A-A

    • ω\omega (Angular Frequency / Tần số góc): Corresponds to the angular speed of the related uniform circular motion. Unit: rad/srad/s.

    • tt: Time.

    • ϕ\phi (Initial Phase / Pha ban đầu): Determines the state of the object at the starting time (t=0t = 0).

    • (ωt+ϕ)(\omega t + \phi) (Phase / Pha dao động): Determines the exact state of the object at any specific time tt.

Advanced Formulas and Characteristics

  • Calculating Period and Frequency via Angular Frequency:

    • Periodic time: T=2πωT = \frac{2\pi}{\omega} (Unit: ss)

    • Frequency: f=1T=ω2πf = \frac{1}{T} = \frac{\omega}{2\pi} (Unit: HzHz)

  • Trajectory (Quỹ đạo):

    • The trajectory of a Simple Harmonic Motion is a straight line segment with a total length (LL) equal to twice the amplitude: L=2AL = 2A (stretching from −A-A to AA).

  • Total Distance in One Period (TT):

    • The total path length (SS) traveled by an object in one full period is exactly four times the amplitude: S=4AS = 4A.

    • Step-by-step breakdown of the path in one period:

      1. From x=−Ax = -A to x=0x = 0: Distance = 1A1A

      2. From x=0x = 0 to x=Ax = A: Distance = 1A1A

      3. From x=Ax = A to x=0x = 0: Distance = 1A1A

      4. From x=0x = 0 to x=−Ax = -A: Distance = 1A1A

      • Total: 1A+1A+1A+1A=4A1A + 1A + 1A + 1A = 4A