Wave Optics: Interference and Diffraction Lecture Notes
Fundamentals of Wave Interference
Wave Superposition Principle:
When two or more light waves traverse simultaneously through the same region of a medium and cross each other, the resultant displacement at any point is the vector sum of the displacements due to the individual waves.
For two sinusoidal waves of identical angular frequency propagating in the same direction:
Displacement of wave 1:
Displacement of wave 2:
The resultant displacement is .
Optical intensity is directly proportional to the square of the resultant amplitude: .
Definition of Interference:
When light waves from two sources having identical frequency (or wavelength) and maintaining a constant phase difference travel in the same direction and superimpose upon each other, there occurs a redistribution (modification) of optical intensity in the region of superposition.
This modification in light energy distribution, resulting in alternate regions of enhanced and diminished intensity that generally differs from the simple algebraic sum of individual intensities, is defined as interference.
The phenomenon of interference provides the primary and definitive experimental confirmation of the wave nature of light, first demonstrated quantitatively by Thomas Young in 1801 via his landmark double-slit experiment.
Everyday natural examples of thin film interference include the brilliant iridescent colours observed on soap bubbles and the shifting rainbow colours seen on thin oil films floating on water when illuminated by white sunlight.
Classification of Interference Effects:
Constructive Interference (Bright Fringes / Maxima):
Occurs when the superimposing waves arrive at a given point in phase with each other (phase difference , where ).
The crest of one wave coincides with the crest of another, producing a maximum resultant amplitude .
The optical path difference must equal an integral multiple of the wavelength :
Destructive Interference (Dark Fringes / Minima):
Occurs when the superimposing waves arrive completely out of phase (phase difference or ).
The crest of one wave coincides with the trough of the other, producing a resultant amplitude equal to the difference of individual amplitudes: .
If the individual amplitudes are equal (), the resultant intensity drops to absolute zero, yielding complete darkness.
The optical path difference must equal an odd integral multiple of half-wavelengths ():


Conditions for Sustained Interference and Beam Splitting Methods
Sustained Interference:
Defined as an interference pattern in which the positions of maximum and minimum intensity remain strictly stationary on a viewing screen over time.
If the phase relationship shifts rapidly or randomly, the pattern rapidly washes out, and the eye perceives only a uniform, time-averaged illumination.
Essential Conditions to Achieve Sustained Interference:
1. Coherent Sources: The two light sources emitting interfering waves must be mutually coherent—maintaining a constant or zero phase difference over time.
2. Identical Wavelength/Frequency: The two sources must emit continuous waves of the same frequency (number of oscillations in 1 second) and identical wavelength (), which dictates identical color.
3. Collinear / Parallel Propagation: The interfering waves must travel in virtually the same direction to maximize the spatial extent of the superposition zone.
4. Equal or Nearly Equal Amplitudes: The interfering waves should possess identical amplitudes (). This ensures that at points of destructive interference the intensity drops completely to zero, producing maximum contrast between bright and dark bands and minimizing observational errors.
5. Small Source Separation: The physical separation distance between the two coherent sources must be extremely small to ensure widely spaced, resolvable fringes.
6. Large Distance to Observation Screen: The distance from the sources to the observation plane/screen must be sufficiently large.
7. Extremely Narrow Sources: The illuminating slits or pinholes must be narrow; a broad source acts as an ensemble of incoherent point sources, blurring the interference.
8. Monochromatic Light: The source light must consist of a single, well-defined wavelength to avoid overlapping, chromatic fringe dispersion.
9. Dark Background: The surrounding ambient background should be dark to optimize visual contrast.
Impossibility of Coherence from Two Independent Sources:
Two independent light sources (such as two separate incandescent bulbs or independent LEDs) can never serve as coherent sources.
Light emission in conventional sources arises from spontaneous atomic de-excitations occurring randomly within durations of approximately , producing uncoordinated wave trains with uncorrelated, rapidly jumping phase constants.
Hence, two independent sources cannot maintain an identical frequency or a constant phase difference.
An example of a highly coherent source is an optical Laser.
Methods of Producing Coherent Sources from a Single Primary Source:
Division of Wavefront:
The continuous primary wavefront originating from a single aperture or parent source is spatially divided into two distinct sub-wavefronts using reflection, refraction, or diffraction.
These two sub-wavefronts act as secondary coherent sources that subsequently superimpose.
Prominent experimental examples: Young's double-slit experiment, Fresnel's biprism, and Lloyd's single mirror.
Division of Amplitude:
The amplitude (and therefore intensity, since ) of a single incident wave is divided into two or more parts by partial reflection and partial refraction at one or multiple boundary interfaces.
The separated beams traverse different optical paths and are reunited to superimpose and interfere.
Because both derived beams originate from identical wavefront regions of the parent beam, their intrinsic frequency and relative phase are locked, satisfying coherence.
Prominent experimental examples: Thin film interference, Newton's rings arrangement, and Michelson's interferometer.
Interference in Thin Parallel Films
Thin Film Arrangement:
Formed when two reflecting boundaries are parallel to each other, enclosing a film of uniform thickness and refractive index (such as an air layer, oil sheen, or soap film).

Ray Superposition in Reflected System:
A monochromatic plane wave ray is incident on the upper boundary of the film at an angle of incidence .
At point , the ray undergoes amplitude division:
Part of the ray is reflected externally into air along direction (Ray 1).
Part of the ray is refracted into the film at angle of refraction along .
At point on the lower boundary, the ray is partially reflected internally along and partially transmitted into the substrate/air along .
At point on the upper boundary, the ray emerges back into the upper medium along (Ray 2), parallel to .
Rays and are coherent and superimpose to produce an interference pattern in reflection.
Derivation of the Geometric Path Difference:
Let the film have thickness and refractive index .
Draw a normal from point perpendicular to the reflected ray .
Beyond the wavefront plane , both rays travel identical distances in air.
The optical path difference (OPD) between Ray 2 and Ray 1 is:
From right triangle (where is perpendicular to the boundary):
Similarly, from right triangle :
Therefore:
To determine the path segment in air, consider right triangle :
From triangles and :
Applying Snell's Law ():
Substituting these components back into the path difference expression:
Correction for Phase Change on Reflection (Stokes' Condition):
When light reflects at the boundary of an optically denser medium (e.g., ray reflecting at point off the upper surface from air to a medium of ), it undergoes an abrupt phase change of radians ().
According to wave mechanics, a phase change of is physically equivalent to an optical path difference of half a wavelength ().
Ray 2 undergoes internal reflection at point (at a denser-to-rarer interface if bounding medium is air), incurring no phase jump.
The total effective optical path difference for the reflected system is:
Interference Conditions for Reflected System:
Constructive Interference (Bright Bands / Maxima):
Destructive Interference (Dark Bands / Minima):
Interference in Transmitted / Refracted System:
Transmitted rays and emerge after undergoing internal reflections.
Neither transmitted ray undergoes reflection at a rarer-to-denser interface; therefore, no additional phase jump of (or path difference ) is introduced.
The total optical path difference for transmitted rays is purely geometric:
Constructive Interference (Bright):
Destructive Interference (Dark):
Complementary Nature:
The mathematical conditions for maxima and minima in the reflected system are precisely inverted in the transmitted system.
Any region or thickness that appears bright in reflected light appears dark in transmitted light, and vice versa.
Hence, the reflected and transmitted interference fringe patterns are strictly complementary.
Necessity of an Extended (Broad) Light Source:
When a thin film is illuminated by a narrow point source of monochromatic light, light rays from the point source are reflected from different surface points at widely differing angles of reflection.
As a consequence, rays from only a very small, restricted portion of the film enter the pupil of the observer's eye at any one position; the field of view is severely limited.
An extended (broad) source contains an infinite ensemble of adjacent emitting points, ensuring that rays incident at multiple angles converge into the viewing aperture simultaneously.
This permits the interference phenomenon across the entire expanse of the film to be observed concurrently without moving the eye.
Interference in Wedge-Shaped Films
Physical Configuration:
A wedge-shaped film is formed by two flat reflecting surfaces and inclined at an extremely small wedge angle .
The thickness of the enclosed medium (refractive index ) varies linearly, having zero thickness at the contact edge () and increasing continuously along .

Ray Analysis and Path Difference Derivation:
A monochromatic ray is incident on the upper surface at an angle .
It reflects along (Ray 1) and refracts into the wedge film along at angle .
At point on the lower inclined surface, it reflects internally along and emerges at the upper surface along (Ray 2).
To find the optical path difference between the reflected coherent rays and , drop a perpendicular onto .
The geometric optical path difference is:
Extend ray segment down to point such that .
Drop a perpendicular from onto extended line meeting at .
By geometric symmetry between triangles and , and .
In triangles and :
Substituting this into the path difference equation:
Construct a normal from perpendicular to the lower surface at , having length equal to the local film thickness ().
Extend line segment downward to intersect line at , giving total length .
The angle between lines and in triangle equals .
Therefore:
The optical path difference becomes:
Stokes' Phase Jump and Final Conditions:
Due to reflection at the upper surface (rarer to denser medium), an additional path change of is introduced.
The total effective optical path difference is:
Constructive Interference (Bright Bands / Maxima):
Destructive Interference (Dark Bands / Minima):
Characteristics of Wedge Fringes:
The fringes formed in a wedge film are straight lines running strictly parallel to the apex edge of the wedge ().
Because varies linearly along the wedge length, the fringes are strictly equidistant and parallel.
At the apex edge (), the path difference is , rendering the apex line always dark.
Newton's Rings: Theoretical Formulation and Experimental Setup
Principle of Formation:
Newton's rings are produced by the interference of light waves reflected from the upper and lower surfaces of a variable-thickness air (or liquid) film enclosed between a plano-convex lens of large radius of curvature and an optically flat glass plate.
The interference mechanism is based entirely on the division of amplitude.

Experimental Setup and Optical Components:
Monochromatic Light Source: A high-intensity monochromatic source (typically an emission sodium vapor lamp emitting at ). Polychromatic light may be used, but monochromatic light produces sharp, highly distinct bright and dark fringes that are substantially easier to measure.
Condensing Lens: Converts diverging rays from the source into a parallel beam.
Inclined Glass Plate (): An optically flat, partially reflecting plane glass plate oriented at an exact angle of to the incident horizontal beam. It reflects the light downward at , ensuring normal incidence (, ) upon the lens-plate system.
Plano-Convex Lens (): A lens with a very large radius of curvature (, often to or more) placed convex-side down on an optically flat plane glass plate (), contacting it at center point .
Travelling Microscope: Positioned vertically above the glass plate to observe and measure the ring diameters along a linear horizontal cross-section.
Fringe Localization and Optical Instruments:
Newton's rings are localized fringes; they are formed exclusively within the thin air film residing directly between the lower spherical surface of the lens and the upper plane surface of the glass plate near the point of contact.
A microscope is required because it can be focused directly on this localized plane of fringe formation.
A telescope cannot be used because telescopes are configured to focus on distant objects at optical infinity.

Fringe Geometry and Dark Center:
Shape of Fringes: The thickness of the air film depends solely on the radial distance from the point of contact . The locus of all points having identical film thickness forms a circle concentric with . Hence, the resulting interference fringes are concentric circles.
State of the Central Spot:
For an air film () at normal incidence (, ), the total path difference is:
At the central point of contact (), the thickness of the film is strictly zero ().
The effective path difference reduces to:
A path difference of corresponds to a phase difference of , causing destructive interference. Therefore, the central spot of the reflected Newton's rings is always dark.
If the center appears bright experimentally, it indicates the presence of dust particles, grease, or surface irregularities preventing physical contact ().
Mathematical Derivation of Newton's Ring Diameters

Geometric Relation between Film Thickness and Ring Radius:
Let be the radius of curvature of the spherical lens surface.
Let be the radius of the fringe, corresponding to an air film thickness .
Construct the complete vertical circular section of radius containing the lens surface, with vertical diameter .
Let be a point on the lens surface at horizontal radial distance from vertical axis , and drop a vertical to the plane glass plate of height .
According to the intersecting chords theorem of a circle:
Here, , , and :
Because is very large (on the order of ) and is microscopic (on the order of microns), and can be neglected:
Expressing this in terms of the ring diameter ():
Diameter of Bright Rings (Constructive Interference):
The condition for constructive interference in the film of refractive index at normal incidence is:
Substituting this expression for into :
For an air film ():
Proportionality: The diameter of the bright rings is directly proportional to the square root of odd natural numbers:
Diameter of Dark Rings (Destructive Interference):
The condition for destructive interference in the film is:
Substituting this expression for into :
For an air film ():
Proportionality: The diameter of the dark rings is directly proportional to the square root of natural numbers:
Dark rings are experimentally preferred for precision measurements because the mathematical expression is simpler and the dark center provides superior visual contrast against crosshairs.
Radial Contraction of the Ring System:
The successive radii and diameters of the dark rings scale as the square root of natural integers:
Examining the successive fringe separations:
Because , the distance between consecutive rings decreases as the order number increases.
Thus, the ring system contracts (fringes become progressively crowded together) as the diameter increases.
Applications and Quantitative Problems in Newton's Rings
Measurement of Unknown Wavelength ():
Let be the measured diameter of the dark ring and be the diameter of the dark ring:
Subtracting the two squared diameters:
Solving for wavelength (for an air film, ):
By taking the difference between two ring diameters, the need to locate the absolute, often imperfect center point () is entirely eliminated.
Measurement of Liquid Refractive Index ():
First, measure the diameters in an air medium ():
Introduce the liquid between the lens and plate without altering the optical curvature or order difference :
Dividing the air measurement by the liquid measurement yields the liquid refractive index:
Step-by-Step Worked Problems:
Problem 1: Wavelength Determination from Bright Ring Data
Given: Diameter of 5th bright ring ; diameter of 25th bright ring ; radius of curvature .
Parameters: , .
Formula:
Calculations:
Problem 2: Liquid Refractive Index from Ring Shrinkage
Given: Radius of 10th dark ring in air ; radius shrinks to when air is replaced by liquid.
Calculations:
Problem 3: Radius of Curvature and Film Thickness Calculation
Given: Monochromatic wavelength ; diameter of 10th dark ring ; film medium air ().
Calculations:
Problem 4: Higher-Order Ring Diameter from Two Dark Rings
Given: Diameter of 5th dark ring ; diameter of 15th dark ring . Determine diameter of 20th dark ring ().
Calculations:
Problem 5: Liquid Refractive Index from Arbitrary-Order Dark Rings
Given: Diameters of and dark rings are and ; ; ; .
Calculations:
Problem 6: Coincidence of Rings from Two Wavelengths
Given: Dual sources and . The dark ring of coincides with the dark ring of . Radius .
Calculations:
Problem 7: Ratio of Refractive Indices from Diameter Ratio
Given: The diameter of the ring in medium 1 to medium 2 is .
Calculations:
Problem 8: Order of Dark Ring for Diameter Doubling
Condition: Find order such that .
Calculations:
Problem 9: General Derivation for Ring Coincidence
Proof: Show that if dark ring of coincides with of , radius .
Proof Steps:
Problem 10: Refractive Index from Bright Ring in Liquid
Given: , , .
Formula:
Calculations:
Fundamentals of Diffraction and Single-Slit Theory
Diffraction Concept:
According to geometrical optics, when light passes through an aperture or past an obstacle , the screen should exhibit a cleanly defined illuminated region while the remaining area (the geometrical shadow region) should remain completely dark.
Experimentally, light intensity within is non-uniform, and detectable intensity fringes encroach into the geometrical shadow.
The phenomenon of bending of light waves around the edges of obstacles or apertures and spreading into the geometrical shadow region is called diffraction.
Criterion for Diffraction: Diffraction is pronounced only when the size of the obstacle or aperture () is of the same order of magnitude as the wavelength of the incident light ().

Classification: Fresnel vs. Fraunhofer Diffraction:
Fresnel Diffraction:
The source of light and the observation screen are maintained at finite distances from the diffracting aperture/obstacle.
No focusing lenses are employed.
The incident wavefront is non-planar (spherical or cylindrical).
Typically studied directly along the primary axis of propagation.
Fraunhofer Diffraction:
The source of light and the observation screen are placed at infinite distances from the diffracting aperture.
Convex lenses are placed before the aperture (to collimate rays into a plane wave) and after the aperture (to focus parallel diffracted rays onto the screen).
The incident wavefront is strictly plane.
Diffracted rays can be analyzed at any arbitrary angle .


Fundamental Differences: Interference vs. Diffraction:
Parameter | Interference | Diffraction |
|---|---|---|
Physical Origin | Superposition of two discrete light waves originating from two separate coherent sources. | Result of mutual superposition of secondary wavelets originating from different points of the same continuous wavefront. |
Intensity of Maxima | All bright fringes possess uniform, equal intensity across the pattern. | The central maximum has the greatest intensity; successive secondary maxima rapidly decrease in intensity. |
Fringe Width | Fringe widths are always uniform (). | Fringe widths are unequal; the central maximum width is double that of secondary fringes, decreasing away from center. |
Minima Contrast | Points of minimum intensity have true zero intensity; fringes exhibit sharp, distinct contrast. | Minima are never completely dark due to residual wavelet overlap; contrast between bright and dark is relatively poor. |
Fraunhofer Diffraction at a Single Slit:
Consider a narrow rectangular slit of width illuminated by a plane monochromatic wave of wavelength .
According to Huygens' principle, every point across slit acts as a continuous source of secondary wavelets.
Secondary waves diffracted at angle are brought to a focus at point on a screen placed at focal distance of convex lens .
The path difference between the extreme wavelets originating from edges and is determined by dropping a normal from onto the bottom diffracted ray:
The corresponding total phase difference between wavelets from the two extreme edges is:
Let the slit width be divided into equal sub-strips, each of amplitude . The phase difference between successive sub-strips is:
Summing the wavelets of common phase step using the multi-wave vector addition formula:
Define parameter :
Then the expression becomes:
Since is very large, the denominator angle is very small, allowing the small-angle approximation :
Setting (the total incident amplitude at ):
The resultant intensity distribution is:
Intensity Distribution and Maxima/Minima:
Central Maximum ():
For , .
Evaluating the limit using L'Hôpital's rule:
Thus, the intensity at the center is a maximum:
Positions of Secondary Minima:
Intensity vanishes when but :
Positions of Secondary Maxima:
Differentiating with respect to and setting it to zero:
Excluding the minima (), the maxima condition is:
The transcendental solutions to give the peak locations of the secondary maxima at approximately: