Chapter 6
Chapter 6: Microbial Growth
Binary Fission Process
Cell Division Process:
The cell elongates and the DNA is replicated.
The cell wall and plasma membrane begin to divide.
A cross-wall forms completely around the divided DNA, leading to separation of cells.
Cells separate into two distinct entities.
Diagrams:
(a) The sequence of cell division illustrating the above steps with elements such as the cell wall, plasma membrane, and DNA location.
(b) An image of a thin section of a Bacillus licheniformis cell initiating division.
Phases of Microbial Growth
Growth patterns of bacteria display a logarithmic (exponential) progression:
Examples include cell counts as follows:
Starting from 1 cell progressing to 2, 4, 8, 16, 32, 64, 128, etc.
The formula represented is , where = number of generations.
Phases of growth include:
Lag Phase:
The initial phase where bacteria adapt to their new environment.
Logarithmic Phase (Log Phase):
Rapid growth and division occur, characterized by exponential increase in cell numbers.
Stationary Phase:
Nutrient depletion and accumulation of waste products result in a plateau in growth.
Death Phase:
An exceeds toxicity and nutrition leads to bacterial death.
Bacterial Division Dynamics
Binary fission is an effective means of rapid reproduction:
Various generation numbers correlate with cell count growth:
Generation numbers: 0, 1, 6, 10, 15, 16, 17, 18, 19, 20 with corresponding numbers of cells calculated as follows:
(generation 1, 1st power of 5)
Microbial Temperature Groups
Microorganisms can be categorized based on their optimal temperature for growth:
Psychrophiles (cold-loving bacteria):
Optimum growth temperature: to .
Mesophiles:
Optimum temperature for growth: to .
Thermophiles (heat-loving bacteria):
Optimum growth temperature: to .
Hyperthermophiles (extreme heat-loving bacteria):
Optimum growth temperature: to .
pH Preferences of Microorganisms
Microorganisms can also be classified based on the pH of their growth environment:
Neutrophiles:
Thrive best at a pH range of to .
Acidophiles:
Prefer acid conditions, thriving below pH ; some can grow below pH , for instance, chemoautotrophic bacteria in coal mine drainage.
Alkaliphiles:
Prefer basic conditions, best growth above pH .
General Bacteria Range:
Most bacteria grow between pH and ; molds and yeasts favor pH to .
Effects of Osmotic Pressure
Osmotic Pressure and Halophiles:
Hypertonic environments lead to plasmolysis due to high salt/sugar concentrations.
Facultative Halophiles:
Tolerate high osmotic pressure.
Extreme Obligate Halophiles:
Require high osmotic pressure to grow.
Chemical Requirements for Microbial Growth
Vital chemical components include:
Carbon:
Serves as a structural organic molecule and energy source;
Chemoheterotrophs utilize organic carbon; autotrophs can fix from the atmosphere.
Nitrogen:
Essential for amino acids/proteins; most bacteria decompose proteins; some utilize or and rare bacteria fix .
Sulfur:
Component of amino acids, thiamine, and biotin; most bacteria degrade proteins; some utilize or .
Phosphorus:
Integral part of DNA, RNA, ATP, and phospholipid membranes; obtained from .
Trace Elements:
Require small amounts of inorganic elements, often as enzyme cofactors; includes essential minerals such as iron and zinc.
Organic Growth Factors
Organic compounds essential for certain organisms:
Must be sourced from the environment due to inability to synthesize; includes vitamins, amino acids, purines, and pyrimidines.
Culture Media Basics
Definition of Culture Media:
Any material prepared for bacterial growth in laboratory settings.
Types of Culture Media:
Liquid Media:
Utilized for the growth of pure batch cultures.
Solidified Media:
Used for isolating pure cultures and estimating viable bacterial populations.
The main gelling agent typically used is agar derived from red algae and essential for solid/semisolid media and comes with specific physical characteristics.
Agar Characteristics
Properties of Agar:
Complex polysaccharide obtained from seaweed; applied as a solidifying agent for culture media in various laboratory formats.
Characterized as non-metabolized by microbes, liquefies at but remains liquid until , and solidifies around .
Types of Culture Media
Chemically Defined Media:
Where the exact chemical composition is known.
Complex Media:
Varies slightly in chemical composition among different preparations.
Selective vs. Differential Media:
Selective Media:
Inhibit unwanted organisms and support desired microbes; used often in pathogenic laboratory work.
Differential Media:
Distinguish among different organisms based on their growth characteristics.
Enrichment Culture:
Encourages the growth of a specific microbe from a mixed culture, usually in low concentration.
Examples of Selective and Differential Media
Mannitol Salt Agar:
Selective for salt-tolerant staphylococci and differential for mannitol fermentation.
Eosin Methylene Blue Agar (EMB):
Selects for Gram-negative bacteria; differentiates based on lactose fermentation; commonly confirms coliform bacteria like E. coli which yields a characteristic "green sheen".
Oxygen Requirements for Bacterial Growth
Different bacteria exhibit distinct oxygen requirements, influencing their growth characteristics:
Obligate Aerobes:
Require oxygen exclusively for growth.
Facultative Anaerobes:
Can grow aerobically or anaerobically but prefer oxygen-rich conditions.
Obligate Anaerobes:
Can only thrive in an oxygen-free environment.
Aerotolerant Anaerobes:
Grow in anaerobic conditions but can tolerate the presence of oxygen.
Microaerophiles:
Require low concentrations of oxygen for optimal growth.
Toxic Forms of Oxygen
Various reactive species can affect microbial viability:
Singlet Oxygen (1O2*):
Higher-energy state of O2, highly reactive.
Superoxide Free Radicals (O2−):
Peroxide Anion (O2 2−):
Hydroxyl Radical (OH•):
Anaerobic Culture Methods
Approaches to facilitating anaerobic conditions:
Reducing Media:
Utilize chemicals (e.g., sodium thioglycollate) for oxygen depletion.
Anaerobic Jars:
Generally achieve anaerobic conditions for solid cultures utilizing gas packs.
Capnophiles and Their Environments
Capnophiles:
Organisms thriving in reduced oxygen and elevated carbon dioxide; typically found in anatomical locations supportive of pathogen growth (e.g., intestines, respiratory tracts).
Biofilms
Definition and Formation:
Aggregates of multiple microorganisms on solid substrates formed initially by weak attachment (i.e. van der Waals forces) and transitioned to stronger binding mechanisms (e.g. fimbriae).
Matrix Structure:
Composed of extracellular polymeric substances (EPS), providing protection from environmental stressors.
Quorum Sensing in Biofilms
Concept:
The ability of a bacterial colony to monitor its population density and regulate gene expression accordingly, impacting behavior such as adhesion and biofilm growth dynamics.
Implications of Biofilms
Beneficial Uses:
In sewage treatment and forming defenses against pathogens.
Negatively Impactful Scenarios:
Can contribute to infections via catheters, prostheses, and play roles in dental disease and inflammatory bowel disease.
Biosafety Levels for Microbial Handling
Biosafety Containment Levels (BSL):
BSL-1:
No special precautions necessary.
BSL-2:
Requires standard lab coats, gloves, eye protection.
BSL-3:
Involves biosafety cabinets to prevent airborne transmission.
BSL-4:
Characteristics include sealed, negative pressure systems; exhaust air filtered twice.
Obtaining Pure Cultures
Definition:
A colony is a population of cells originating from a single cell, spore, or an aggregative group of interconnected cells.
Colony-Forming Units (CFUs):
Used as a metric for reporting; an example method for isolation is the streak plate method.
Preservation of Bacterial Cultures
Deep-Freezing:
Ranges between -50° to -95°C, prompting rapid freezing and low-temperature storage.
Lyophilization (Freeze-Drying):
Processes where cultures are frozen (-54° to -72°C) and then vacuum dehydrated, facilitating long-term preservation of surviving bacteria.
Methods for Counting Bacteria
Standard Plate Count (Viable Count):
Reflects the viable microbes count, assuming each grows into a distinct colony (not always accurate due to bacteria's ability to form chains).
Filtration Method:
Used principally to count bacteria in small volumes of water samples.
Most Probable Number (MPN) Method:
A statistical estimation used for microbes growing in liquid medium; counting occurs through positive tubes.
Direct Microscopic Count:
Uses specialized slides to count microbes directly in measured volumes.
Plate Count Analysis
Process after incubation:
Examine plates with 30-300 CFUs, utilizing known dilution methods to calculate original bacterial amounts in the sample.
Formula used is:
Number of colonies on the plate x reciprocal of dilution of sample = number of bacteria/ml.
Example: If 32 colonies appear on a plate representing a dilution, then total bacterial count = in the original sample.
Filtration Techniques
Protocol:
Filter 100 ml of water sample; then culture on a nutrient-soaked pad to cultivate colonies from bacteria collected on the filter surface.
Microscopic Enumeration of Bacteria
Petroff-Hausser Cell Counter:
A method using a specially designed slide to count bacterial cells in a defined volume; the formula allows calculation for high total counts based on average cell counts in large squares.
Turbidity Measurement of Bacterial Population
Spectrophotometric Analysis:
A spectrophotometer determines turbidity through light absorption, establishing a correlation of optical density to CFU/ml for approximate bacterial estimates prior to plate counting.
Experimental Setup for Turbidity Counting
Arrangement:
A diagraph representation includes components such as a light source, light-sensitive detector, and bacterial suspension to display overall measurement effectiveness.