Engine Fuel System
System Overview and Purpose
Primary Purpose of Engine Fuel System:
Supplies filtered and metered fuel for combustion within the engine.
Operational Sidenote:
ORM (Operation Risk Managment).
Fuel System Components
1. Distribution System:
Responsible for routing fuel directly through the Fuel Pump Metering Unit (FPMU).
2. Fuel Pump Metering Unit (FPMU):
Core unit housing pumping, filtering, and metering mechanisms.
3. Fuel Pump Assembly:
Consists of pumps.
Dual-stage operational sequence: the pump starts the pumping process, and the pump finishes it.
4. Fuel Filter Assembly:
Integrated assembly that houses bypass indicators.
Indication mechanisms: one is mechanical and the other is electrical.
5. Metering Assembly:
Contains a servo-operated plunger to modulate fuel output.
6. Fuel Cooled Oil Cooler (FCOC):
Heat exchanger unit utilizing fuel to cool engine oil.
7. Compressor Variable Geometry (CVG) Actuator:
Controls airflow through the engine.
Actuation method: fuel-actuated via fuel pressure.
8. Fuel Manifolds and Nozzles:
Includes fuel manifolds.
Each fuel manifold is connected to fuel nozzles, making a total of fuel nozzles.
Mounting configuration: all nozzles are mounted to diffusers on studs and connected directly to the fuel manifold.
9. Fuel Drain Manifolds:
Comprises manifolds.
Dual-manifold function: one supplies fuel and one drains fuel.
10. Controlling System (FADEC A/B):
Consists of Full Authority Digital Engine Controls (Fadecs A/B).
Both FADECs are connected by an electrical harness designed to prevent cross communication.
System Operations and Component Interactions
FPMU Operation:
Performs three primary operational functions: pumps fuel, filters fuel, and meters fuel.
Provides fuel filter bypass indication.
Supplies required fuel pressure to move and position the CVG actuator.
Fuel Filter Operation:
Receives fuel delivered from the centrifugal pump for filtration prior to metering.
Metering Assembly Operation:
Operated via a FADEC-driven torquemeter.
The torquemeter provides servo pressure to the metering valve plunger to adjust position and satisfy fuel flow demands established by the FADEC.
Fuel Cooled Oil Cooler (FCOC) Operation:
Operates inline to exchange thermal energy between the engine oil and fuel system.
Compressor Variable Geometry (CVG) Actuator Operation:
Changes the angle of compressor stator vane stages through .
Adjusts stator vane stages to assist directly with engine power control.
Fuel Manifolds and Nozzles Operation:
Receives fuel routed from the mass fuel flow sensor and delivers it into the combustion chamber via the stud-mounted nozzles.
FADEC Architecture and Control
FADEC Operational Channeling:
While two units ( and ) exist, one single FADEC controls engine operation at any given time.
FADEC Communication and Computation:
Continuously monitors sensor inputs across the engine.
Calculates necessary outputs required for both engine control and propeller control.
FADEC Fuel Control:
FADEC software actively monitors and controls fuel delivery.
Regulates fuel scheduling specifically to limit measured gas temperature (MGT) to a predetermined specific value.
Indicating System Components
Fuel Bypass Indicators:
Dual-indication capability featuring filter bypass indicators.
Warning stages: indicates both impending bypass and actual bypass states.
Fuel Mass Flow Sensor:
Directly monitors and measures the mass flow rate of fuel routed to the fuel manifolds.
Fuel Temperature Switch:
Operates to monitor and signal fuel temperature conditions within the system.