Comprehensive Atomic Theory, Quantum Mechanics, Periodic Trends, Chemical Bonding, and Thermochemical Cycles

Modern Atomic Theory and Light

  • Electromagnetic Radiation (EMR):

    • Electromagnetic radiation (light) travels through space as a transverse wave composed of oscillating, mutually perpendicular electric (E⃗\vec{E}) and magnetic (B⃗\vec{B}) fields that propagate in the direction of travel (v⃗\vec{v}).

Electromagnetic wave components
  • Wave Properties and Fundamental Relationships:

    • Wavelength (λ\lambda): The distance between two consecutive peaks or troughs in a wave (measured in meters, m\text{m}, or nanometers, nm\text{nm}, where 1 nm=10−9 m1\,\text{nm} = 10^{-9}\,\text{m}, or angstroms, A˚\text{Å}, where 1 A˚=10−10 m=10−8 cm1\,\text{Å} = 10^{-10}\,\text{m} = 10^{-8}\,\text{cm}).

    • Frequency (ν\nu): The number of complete wave cycles that pass a given point per second (measured in cycles/second\text{cycles/second}, s−1\text{s}^{-1}, or Hertz, Hz\text{Hz}).

  • Speed of Light (cc): All electromagnetic waves travel through a vacuum at the constant speed of light:
      c=2.9979×108 m/sc = 2.9979 \times 10^8\,\text{m/s}

  • Wave Equation: Wavelength and frequency are inversely proportional:
      c=λνc = \lambda \nu

  • The Electromagnetic Spectrum:

    • Arranged in order of increasing wavelength (decreasing frequency and energy):

    • Gamma rays: λ∼10−12 m\lambda \sim 10^{-12}\,\text{m}

    • X-rays: λ∼10−10 m\lambda \sim 10^{-10}\,\text{m}

    • Ultraviolet (UV): λ∼10−8 m\lambda \sim 10^{-8}\,\text{m}

    • Visible spectrum: λ≈4×10−7 m\lambda \approx 4 \times 10^{-7}\,\text{m} to 7×10−7 m7 \times 10^{-7}\,\text{m} (400 nm400\,\text{nm} to 700 nm700\,\text{nm}, or 3900 A˚3900\,\text{Å} to 7600 A˚7600\,\text{Å}), spanning violet, indigo, blue, green, yellow, orange, and red (VIBGYOR).

    • Infrared (IR): λ∼10−4 m\lambda \sim 10^{-4}\,\text{m}

    • Microwaves: λ∼10−2 m\lambda \sim 10^{-2}\,\text{m}

    • Radio waves: λ∼1 m\lambda \sim 1\,\text{m} to 104 m10^4\,\text{m} (including FM, Shortwave, and AM bands).

The Electromagnetic Spectrum
  • Quantization of Energy and the Black-Body Problem:

    • Classical Newtonian physics predicted that a heated body (black-body) should emit continuous electromagnetic radiation with intensity increasing toward the ultraviolet and gamma ray regions without limit—a failure known as the ultraviolet catastrophe.

    • Max Planck resolved this problem by postulating that matter absorbs or emits energy only in discrete packets called "quanta."

    • The energy of a quantum is directly proportional to the radiation frequency:
          ΔE=nhν\Delta E = n h \nu

  • nn is a positive integer (1,2,3,4,…1, 2, 3, 4, \dots).

  • hh is Planck's constant:
      h=6.626×10−34 J⋅sh = 6.626 \times 10^{-34}\,\text{J}\cdot\text{s}

  • ν\nu is frequency (s−1\text{s}^{-1}.

  • The Photoelectric Effect:

    • Albert Einstein extended Planck's concept, proposing that light exhibits particle-like behavior as a stream of localized energy packets called photons.

    • When electromagnetic radiation strikes a metal surface, electrons can be ejected.

Photoelectric effect: high-frequency light ejects electrons from a metal surface
  • Key Experimental Observations:

    • Electrons are only ejected if the incident light meets or exceeds a specific minimum threshold frequency (ν0\nu_0), characteristic of each individual metal.

  • Light with a frequency below ν0\nu_0 fails to eject any electrons regardless of how bright or intense the light source is.

  • When the light frequency meets or exceeds ν0\nu_0, increasing the brightness (intensity) increases the total number of ejected electrons per second, but does not alter their kinetic energy.

  • Increasing the frequency beyond ν0\nu_0 increases the maximum kinetic energy of the ejected electrons.

  • Photon Energy Formulas:
      Ephoton=hνE_{\text{photon}} = h \nu     Ephoton=hcλE_{\text{photon}} = \frac{h c}{\lambda}

  • Atomic Emission Spectra and the Bohr Model:

    • Continuous vs. Line Spectra:

    • Passing white light through a prism produces a continuous spectrum containing all visible wavelengths without interruption.

Continuous spectrum produced by white light passing through a prism
  • Passing light emitted from an electrically excited gas discharge tube (e.g., hydrogen gas) through a prism yields a discrete (line) spectrum consisting of distinct, narrow emission lines.

Hydrogen emission setup producing a discrete line spectrum
  • The Hydrogen Emission Spectrum:

    • The visible emission spectrum of hydrogen displays four prominent lines:

    • 410 nm410\,\text{nm} (violet): transition from n=6→2n = 6 \rightarrow 2

    • 434 nm434\,\text{nm} (blue-violet): transition from n=5→2n = 5 \rightarrow 2

    • 486 nm486\,\text{nm} (blue-green): transition from n=4→2n = 4 \rightarrow 2

    • 656 nm656\,\text{nm} (red-orange): transition from n=3→2n = 3 \rightarrow 2

    • Because Ephoton=hcλE_{\text{photon}} = \frac{h c}{\lambda}, shorter wavelengths correspond to larger energy differences (ΔE\Delta E). The 6→26 \rightarrow 2 transition (410 nm410\,\text{nm}) represents the largest visible energy difference, while 3→23 \rightarrow 2 (656 nm656\,\text{nm}) represents the smallest.

    • Transitions to n=1n = 1 (from n≥2n \ge 2) involve larger energy differences and produce ultraviolet emissions (Lyman series).

    • Transitions ending at n≥3n \ge 3 (from higher levels) involve smaller energy differences and produce infrared emissions (Paschen series, etc.).

  • Bohr Quantized Energy Levels:

    • Niels Bohr proposed that electrons move in circular orbits at fixed distances from the nucleus with quantized energy levels (n=1,2,3,…n = 1, 2, 3, \dots).

Bohr energy level diagram depicting electronic transitions
* When an electron absorbs energy, it transitions from a lower level (ground state, n=1n = 1) to an excited state (n>1n > 1). When it relaxes to a lower level, it emits a photon with energy matching the energy difference between the levels.
* **Rydberg Energy Equation:**  

      E=−2.178×10−18 J(Z2n2)E = -2.178 \times 10^{-18}\,\text{J} \left(\frac{Z^2}{n^2}\right) * ZZ is nuclear charge (Z=1Z = 1 for hydrogen). * nn is the principal energy level. * For hydrogen:
      E=−2.178×10−18 J(1n2)E = -2.178 \times 10^{-18}\,\text{J} \left(\frac{1}{n^2}\right) * The energy difference between two levels (ninitialn_{\text{initial}} and nfinaln_{\text{final}}) is:
      ΔE=−2.178×10−18 J(1nfinal2−1ninitial2)\Delta E = -2.178 \times 10^{-18}\,\text{J} \left(\frac{1}{n_{\text{final}}^2} - \frac{1}{n_{\text{initial}}^2}\right) * At the ionization limit (n=∞n = \infty):
      E∞=−2.178×10−18 J(1∞2)=0E_\infty = -2.178 \times 10^{-18}\,\text{J} \left(\frac{1}{\infty^2}\right) = 0

  • Merits and Limitations of the Bohr Model:

    • Merits: Accurately calculated the emission spectrum of hydrogen and introduced the fundamental concept of quantized electron energy levels.

    • Limitations: Only applies to one-electron species (e.g., H\text{H}, He+\text{He}^+, Li2+\text{Li}^{2+}, Be3+\text{Be}^{3+}); it fails for multi-electron systems. The assumption of defined circular orbits is physically incorrect.

    • Wave-Particle Duality and the Uncertainty Principle:

  • De Broglie Wavelength of Matter:

    • Louis de Broglie hypothesized that if light has particle-like properties, particles of matter must possess wave-like characteristics.

    • Combining Einstein's mass-energy equivalence (E=mc2E = m c^2) with Planck's relation (E=hcλE = \frac{h c}{\lambda}) gives mc2=hcλm c^2 = \frac{h c}{\lambda}, or λ=hmc\lambda = \frac{h}{m c}. Replacing cc with particle velocity (vv) yields the de Broglie equation:
            λ=hmv\lambda = \frac{h}{m v}

      • λ\lambda is wavelength in meters (m\text{m}.

      • hh is Planck's constant (6.626×10−34 J⋅s=6.626×10−34 kg⋅m2s−16.626 \times 10^{-34}\,\text{J}\cdot\text{s} = 6.626 \times 10^{-34}\,\text{kg}\cdot\text{m}^2\text{s}^{-1}.

      • mm is mass in kilograms (kg\text{kg}.

      • vv is velocity in meters per second (m/s\text{m/s}.

  • Electron Diffraction:

    • Diffraction is a characteristic wave behavior occurring when waves scatter through slits or crystal lattices, generating constructive and destructive interference patterns.

Constructive and destructive interference of waves
  • In 1927, researchers at Bell Laboratories in New York City experimentally verified that a beam of electrons passing through a nickel crystal produces a diffraction pattern, confirming that electrons possess wave properties.

    • Heisenberg Uncertainty Principle:

  • Formulated by Werner Heisenberg, this principle states that it is physically impossible to simultaneously determine both the exact position and momentum of a particle with absolute precision:
        Δx⋅Δ(mv)≥h4π\Delta x \cdot \Delta(m v) \ge \frac{h}{4\pi}

    • Δx\Delta x is uncertainty in position.

    • Δ(mv)\Delta(m v) is uncertainty in momentum (mm is mass, vv is velocity).

  • For macroscopic objects, the large mass makes the product of uncertainties negligible. For microscopic particles (electrons), possessing high precision in velocity/momentum entails extreme uncertainty regarding position.

Quantum Mechanics and Atomic Orbitals

  • Quantum Mechanical Model of the Atom:

    • Erwin Schrödinger (~1930) modeled the bound electron as a three-dimensional standing wave.

    • In a standing wave along a closed circular orbit, constructive interference requires an integral number of half-wavelengths or whole wavelengths (n=4,5,…n = 4, 5, \dots). Non-integer values (e.g., n=413n = 4\frac{1}{3}) result in destructive wave cancellation (mismatch).

Standing circular waves showing matched allowed wavelengths versus mismatched destructive interference
  • Schrödinger Wave Equation:
        h28π2md2Ψdx2+VΨ=EΨ\frac{h^2}{8\pi^2 m} \frac{d^2\Psi}{dx^2} + V\Psi = E\Psi

    • Ψ\Psi (psi) is the wave function, which contains all spatial information about the electron.

    • VV is the potential energy, and EE is total energy.

  • Physical Meaning of the Wave Function:

    • The mathematical sign of Ψ\Psi can be positive or negative; this phase designation reflects wave topology rather than electric charge.

    • The square of the wave function (Ψ2\Psi^2) represents probability density—the probability of finding the electron at a given point in space, aligning with Heisenberg's Uncertainty Principle.

    • Atomic Orbitals and Nodes:

  • 1s1s Orbital:

    • Spherically symmetrical electron cloud.

    • The wave function Ψ\Psi and probability density Ψ2\Psi^2 are at a maximum at the nucleus (x=0x = 0) and decay exponentially with distance (xx). It contains zero radial nodes.

  • 2s2s Orbital:

    • Consists of an inner spherical region of electron density separated from an outer spherical shell by a node.

    • Node: A region of space where Ψ=0\Psi = 0 and Ψ2=0\Psi^2 = 0 (zero probability of finding an electron).

    • Contains 11 radial node.

The 2s orbital showing internal radial node
  • 3s3s Orbital:

    • Larger spherical distribution containing 22 concentric spherical nodes.

  • 2p2p Orbitals:

    • Dumbbell-shaped with two lobes of opposite wave function signs (+Ψ+\Psi and −Ψ-\Psi) separated by a planar nodal surface intersecting the nucleus.

    • Squaring Ψ\Psi produces two lobes of high probability density (Ψ2\Psi^2).

    • Set of three mutually perpendicular degenerate orbitals: 2px2p_x, 2py2p_y, and 2pz2p_z.

The three 2p orbitals oriented along Cartesian axes
  • dd Orbitals:

    • Set of five orbitals corresponding to angular momentum quantum number l=2l = 2:

    • dxyd_{xy}, dyzd_{yz}, dxzd_{xz}: Four-lobed cloverleaf shapes lying in the planes between the respective coordinate axes.

    • dx2−y2d_{x^2-y^2}: Four lobes aligned directly along the xx and yy axes.

    • dz2d_{z^2}: Two primary lobes aligned along the zz-axis with a toroidal (doughnut-shaped) ring in the xyxy-plane.

The five d orbitals
  • ff Orbitals:

    • Set of seven complex orbitals corresponding to l=3l = 3:
          fz3−35zr2f_{z^3 - \frac{3}{5}z r^2}, fx3−35xr2f_{x^3 - \frac{3}{5}x r^2}, fy3−35yr2f_{y^3 - \frac{3}{5}y r^2}, fxyzf_{xyz}, fy(x2−z2)f_{y(x^2 - z^2)}, fx(z2−y2)f_{x(z^2 - y^2)}, and fz(x2−y2)f_{z(x^2 - y^2)}.

The seven f orbitals
  • Higher Principal Energy Level Sublevels:

    • A 3p3p orbital has the same overall angular symmetry as a 2p2p orbital but contains an additional internal radial node.

    • Quantum Numbers:

  • Principal Quantum Number (nn):

    • Values: n=1,2,3,4,5,…n = 1, 2, 3, 4, 5, \dots

    • Specifies the main energy level (shell) and size of the orbital.

  • Angular Momentum Quantum Number (ll):

    • Values: l=0,1,2,3,…,(n−1)l = 0, 1, 2, 3, \dots, (n - 1)

    • Defines orbital shape (sublevel):

      • l=0→sl = 0 \rightarrow s

      • l=1→pl = 1 \rightarrow p

      • l=2→dl = 2 \rightarrow d

      • l=3→fl = 3 \rightarrow f

  • Magnetic Quantum Number (mlm_l):

    • Values: ml=−l,(−l+1),…,0,…,(l−1),+lm_l = -l, (-l + 1), \dots, 0, \dots, (l - 1), +l

    • Designates the spatial orientation of the orbital.

  • Spin Quantum Number (msm_s):

    • Values: ms=+12m_s = +\frac{1}{2} ("spin up") or ms=−12m_s = -\frac{1}{2} ("spin down").

    • Describes the intrinsic magnetic spin state of the electron.

    • Pauli Exclusion Principle:

  • In a given atom, no two electrons can possess the same set of four quantum numbers (n,l,ml,msn, l, m_l, m_s).

  • Operational consequence: An orbital can hold a maximum of two electrons, and if two electrons occupy the same orbital, their spins must be antiparallel (paired with opposite signs: +12+\frac{1}{2} and −12-\frac{1}{2}).

    • Orbital Energy Levels and Degeneracy:

  • One-Electron Systems (H\text{H}): All orbitals with the same principal quantum number nn are completely degenerate (possess identical energies):
        E1s<E2s=E2p<E3s=E3p=E3dE_{1s} < E_{2s} = E_{2p} < E_{3s} = E_{3p} = E_{3d}

Energy level degeneracy in hydrogen
  • Polyelectronic Systems: Electron-electron repulsions remove subshell degeneracy. Within a given principal energy level nn, the subshells split in energy according to:
      ns<np<nd<nfns < np < nd < nf

Energy level splitting in polyelectronic atoms
  • Rules for Ground State Electron Configurations:

    • Aufbau Principle: Electrons fill the lowest-energy orbitals available before occupying higher levels.

    • Hund's Rule: When populating degenerate orbitals (e.g., 2p2p, 3d3d), electrons occupy individual orbitals singly with parallel spins before any pairing occurs.

    • Periodic Subshell Blocks:

    • Groups 1A–2A: ss-block

    • Groups 3A–8A: pp-block

    • Transition Metals (3B–2B): dd-block

    • Lanthanides and Actinides: ff-block (4f4f and 5f5f)

Periodic table electron configuration block layout
  • Notable Exceptions to Aufbau Filling Rules:

    • Transitions in the dd-block elements favor half-filled (d5d^5) or fully filled (d10d^{10}) configurations due to enhanced stability and minimized electron-electron repulsions:

    • Chromium (Cr\text{Cr}, Z=24Z = 24):

      • Predicted: [Ar]4s23d4[\text{Ar}]4s^2 3d^4

      • Actual: [Ar]4s13d5[\text{Ar}]4s^1 3d^5

    • Molybdenum (Mo\text{Mo}, Z=42Z = 42):

      • Predicted: [Kr]5s24d4[\text{Kr}]5s^2 4d^4

      • Actual: [Kr]5s14d5[\text{Kr}]5s^1 4d^5

    • Copper (Cu\text{Cu}, Z=29Z = 29):

      • Predicted: [Ar]4s23d9[\text{Ar}]4s^2 3d^9

      • Actual: [Ar]4s13d10[\text{Ar}]4s^1 3d^{10}

    • Silver (Ag\text{Ag}, Z=47Z = 47):

      • Predicted: [Kr]5s24d9[\text{Kr}]5s^2 4d^9

      • Actual: [Kr]5s14d10[\text{Kr}]5s^1 4d^{10}

    • Gold (Au\text{Au}, Z=79Z = 79):

      • Predicted: [Xe]6s24f145d9[\text{Xe}]6s^2 4f^{14} 5d^9

      • Actual: [Xe]6s14f145d10[\text{Xe}]6s^1 4f^{14} 5d^{10}

  • Classification of Electrons:

    • Valence Electrons: Electrons residing in the outermost energy levels; determine chemical reactivity and bonding capacity.

    • Representative elements (ss- and pp-blocks): Electrons in the highest nn shell (nsns and npnp).

      • Example: Na\text{Na} (1s22s22p63s11s^2 2s^2 2p^6 3s^1) has 11 valence electron.

      • Example: Br\text{Br} (1s22s22p63s23p64s23d104p51s^2 2s^2 2p^6 3s^2 3p^6 4s^2 3d^{10} 4p^5) has 77 valence electrons (4s24p54s^2 4p^5).

    • Transition metals: Electrons in the outermost ss shell along with partially filled outer dd sublevels.

      • Example: Mn\text{Mn} (1s22s22p63s23p64s23d51s^2 2s^2 2p^6 3s^2 3p^6 4s^2 3d^5) has 77 valence electrons.

      • Example: Cd\text{Cd} ([Kr]5s24d10[\text{Kr}]5s^2 4d^{10}) has 22 valence electrons (5s25s^2).

    • Core Electrons: All inner, non-valence electrons that shield outer electrons from nuclear attraction.

    • Periodic Group Configurations:

    • Alkali metals: [Noble Gas]ns1[\text{Noble Gas}]ns^1 (11 valence electron)

    • Alkaline earth metals: [Noble Gas]ns2[\text{Noble Gas}]ns^2 (22 valence electrons)

    • Halogens: [Noble Gas]ns2np5[\text{Noble Gas}]ns^2 np^5 (77 valence electrons)

    • Noble gases: Filled ss and pp subshells (ns2np6ns^2 np^6; He\text{He} is 1s21s^2)

    • Lanthanides: Incomplete filling of 4f4f orbitals

    • Actinides: Incomplete filling of 5f5f orbitals

Periodic Trends

  • Ionization Energy (IE):

    • Definition: The minimum energy required to remove an electron from a gaseous atom or ion in its ground state.

    • Successive Ionization Steps:
          X(g)→X+(g)+e−ΔE=I1(first ionization energy)\text{X}(g) \rightarrow \text{X}^+(g) + e^- \quad \Delta E = I_1 \quad (\text{first ionization energy})     X+(g)→X2+(g)+e−ΔE=I2(second ionization energy)\text{X}^+(g) \rightarrow \text{X}^{2+}(g) + e^- \quad \Delta E = I_2 \quad (\text{second ionization energy})     X2+(g)→X3+(g)+e−ΔE=I3(third ionization energy)\text{X}^{2+}(g) \rightarrow \text{X}^{3+}(g) + e^- \quad \Delta E = I_3 \quad (\text{third ionization energy})

    • All ionization energies are endothermic (positive values, ΔE>0\Delta E > 0).

    • Successive ionization energies always increase for a given species:
          I1<I2<I3<…I_1 < I_2 < I_3 < \dots

First ionization energy versus atomic number across periods
  • General Periodic Trends:

    • Across a Period (left to right): Ionization energy generally increases because nuclear charge increases (ZeffZ_{\text{eff}}) while valence electrons enter the same principal shell, drawing the electron cloud tighter.

    • Down a Group (top to bottom): Ionization energy decreases because electrons enter higher principal quantum levels (nn), increasing average distance from the nucleus and experiencing greater shielding by inner core electrons.

  • Deviations Across a Period:

    • Group 2A to Group 3A (e.g., Be\text{Be} to B\text{B}; Mg\text{Mg} to Al\text{Al}):

    • Beryllium (1s22s21s^2 2s^2) loses an electron from a filled 2s2s orbital.

    • Boron (1s22s22p11s^2 2s^2 2p^1) loses an electron from the higher-energy 2p2p sublevel, which is shielded by the 2s2s electrons and further from the nucleus, resulting in a lower first ionization energy.

    • Group 5A to Group 6A (e.g., N\text{N} to O\text{O}; P\text{P} to S\text{S}):

    • Nitrogen (1s22s22p31s^2 2s^2 2p^3) has half-filled 2p2p orbitals with single, parallel spins.

    • Oxygen (1s22s22p41s^2 2s^2 2p^4) has one paired set of electrons in a 2p2p orbital. Inter-electron repulsion within this doubly occupied orbital lowers the energy required to remove one electron.

  • Successive Ionization Energies for Period 3 Elements (kJ/mol\text{kJ/mol}):

Element

I1I_1

I2I_2

I3I_3

I4I_4

I5I_5

I6I_6

I7I_7

Na\text{Na}

495495

45604560

—

—

—

—

—

Mg\text{Mg}

735735

14451445

77307730

—

—

—

—

Al\text{Al}

580580

18151815

27402740

1160011600

—

—

—

Si\text{Si}

780780

15751575

32203220

43504350

1610016100

—

—

P\text{P}

10601060

18901890

29052905

49504950

62706270

2120021200

—

S\text{S}

10051005

22602260

33753375

45654565

69506950

84908490

2700027000

Cl\text{Cl}

12551255

22952295

38503850

51605160

65606560

93609360

1100011000

Ar\text{Ar}

15271527

26652665

39453945

57705770

72307230

87808780

1200012000

  • Key Trend: An abrupt, massive jump in ionization energy occurs immediately after all valence electrons are removed and the first core electron is ionized (bolded boundaries above), because core electrons reside closer to the nucleus and experience far less shielding.

    • Atomic Radius:

  • Periodic Trend:

    • Across a period (left to right): Atomic radius decreases because nuclear charge increases (ZeffZ_{\text{eff}}) without additional shielding shells, pulling valence electrons closer.

    • Down a group (top to bottom): Atomic radius increases because electrons occupy higher principal energy levels (nn) with larger orbital sizes.

Atomic radii of main group elements in picometers
  • Representative Atomic Radii (pm\text{pm}):

    • Period 1: H\text{H} (3737), He\text{He} (3232)

    • Period 2: Li\text{Li} (152152), Be\text{Be} (113113), B\text{B} (8888), C\text{C} (7777), N\text{N} (7070), O\text{O} (6666), F\text{F} (6464), Ne\text{Ne} (6969)

    • Period 3: Na\text{Na} (186186), Mg\text{Mg} (160160), Al\text{Al} (143143), Si\text{Si} (117117), P\text{P} (110110), S\text{S} (104104), Cl\text{Cl} (9999), Ar\text{Ar} (9797)

    • Period 4: K\text{K} (227227), Ca\text{Ca} (197197), Ga\text{Ga} (122122), Ge\text{Ge} (122122), As\text{As} (121121), Se\text{Se} (117117), Br\text{Br} (114114), Kr\text{Kr} (110110)

    • Period 5: Rb\text{Rb} (247247), Sr\text{Sr} (215215), In\text{In} (163163), Sn\text{Sn} (140140), Sb\text{Sb} (141141), Te\text{Te} (143143), I\text{I} (133133), Xe\text{Xe} (130130)

    • Period 6: Cs\text{Cs} (265265), Ba\text{Ba} (217217), Tl\text{Tl} (170170), Pb\text{Pb} (175175), Bi\text{Bi} (155155), Po\text{Po} (167167), At\text{At} (140140), Rn\text{Rn} (145145)

    • Electron Affinity (EA):

  • Definition: The energy change associated with adding an electron to a gaseous atom:
        X(g)+e−→X−(g)ΔE<0\text{X}(g) + e^- \rightarrow \text{X}^-(g) \quad \Delta E < 0

  • Energetics:

    • The first electron affinity is generally exothermic (negative value, energy released) because the incoming electron experiences attraction to the neutral atom's nucleus.

    • The second electron affinity is endothermic (positive value) because energy is required to overcome electrostatic repulsion when adding an electron to a negatively charged ion.

    • Electron affinity is not the exact reverse of ionization energy because the electron is added to a neutral atom rather than removed from an anion.

    • Ionic Radii and Isoelectronic Series:

  • Cations vs. Parent Atoms: Cations are always smaller than their neutral parent atoms because the loss of valence electrons reduces electron-electron repulsion, increases ZeffZ_{\text{eff}} per electron, and often removes the entire outermost shell.

  • Anions vs. Parent Atoms: Anions are always larger than their neutral parent atoms because the addition of electrons increases inter-electronic repulsion, expanding the electron cloud.

Atomic radius compared to ionic radius for representative elements
  • Selected Atomic and Ionic Radii Comparison (A˚\text{Å}):

    • Li\text{Li} (1.521.52) vs. Li+\text{Li}^+ (0.900.90); Be\text{Be} (1.121.12) vs. Be2+\text{Be}^{2+} (0.590.59)

    • Na\text{Na} (1.861.86) vs. Na+\text{Na}^+ (1.161.16); Mg\text{Mg} (1.601.60) vs. Mg2+\text{Mg}^{2+} (0.850.85); Al\text{Al} (1.431.43) vs. Al3+\text{Al}^{3+} (0.680.68)

    • K\text{K} (2.272.27) vs. K+\text{K}^+ (1.521.52); Ca\text{Ca} (1.971.97) vs. Ca2+\text{Ca}^{2+} (1.141.14); Ga\text{Ga} (1.351.35) vs. Ga3+\text{Ga}^{3+} (0.760.76)

    • Rb\text{Rb} (2.482.48) vs. Rb+\text{Rb}^+ (1.661.66); Sr\text{Sr} (2.152.15) vs. Sr2+\text{Sr}^{2+} (1.321.32); In\text{In} (1.671.67) vs. In3+\text{In}^{3+} (0.940.94)

    • Cs\text{Cs} (2.652.65) vs. Cs+\text{Cs}^+ (1.811.81); Ba\text{Ba} (2.222.22) vs. Ba2+\text{Ba}^{2+} (1.491.49); Tl\text{Tl} (1.701.70) vs. Tl3+\text{Tl}^{3+} (1.031.03)

    • N\text{N} (0.750.75) vs. N3−\text{N}^{3-} (1.711.71); O\text{O} (0.730.73) vs. O2−\text{O}^{2-} (1.261.26); F\text{F} (0.720.72) vs. F−\text{F}^- (1.191.19)

    • S\text{S} (1.031.03) vs. S2−\text{S}^{2-} (1.701.70); Cl\text{Cl} (1.001.00) vs. Cl−\text{Cl}^- (1.671.67)

    • Se\text{Se} (1.191.19) vs. Se2−\text{Se}^{2-} (1.841.84); Br\text{Br} (1.141.14) vs. Br−\text{Br}^- (1.821.82)

    • Te\text{Te} (1.421.42) vs. Te2−\text{Te}^{2-} (2.072.07); I\text{I} (1.331.33) vs. I−\text{I}^- (2.062.06)

  • Isoelectronic Series:

    • Defined as a group of ions or atoms possessing the identical number of electrons.

    • Ionic size decreases with increasing nuclear charge (more protons pull the identical electron cloud closer).

    • Example: [Kr][\text{Kr}] isoelectronic series (36 e−36\,e^-):

    • Se2−\text{Se}^{2-}: 34 p+34\,p^+ attracting 36 e−→Radius=198 pm36\,e^-\rightarrow \text{Radius} = 198\,\text{pm}

    • Br−\text{Br}^-: 35 p+35\,p^+ attracting 36 e−→Radius=195 pm36\,e^-\rightarrow \text{Radius} = 195\,\text{pm}

    • Rb+\text{Rb}^+: 37 p+37\,p^+ attracting 36 e−→Radius=148 pm36\,e^-\rightarrow \text{Radius} = 148\,\text{pm}

    • Sr2+\text{Sr}^{2+}: 38 p+38\,p^+ attracting 36 e−→Radius=113 pm36\,e^-\rightarrow \text{Radius} = 113\,\text{pm}

Chemical Bonding

  • Types of Chemical Bonds:

    • Ionic Bonding: Electrostatic attraction between oppositely charged ions (cations and anions), typically formed between metals and non-metals.

    • Governed by Coulomb's Law:
            E=2.31×10−19 J⋅nm(Q1Q2r)E = 2.31 \times 10^{-19}\,\text{J}\cdot\text{nm} \left(\frac{Q_1 Q_2}{r}\right)

      • EE is energy.

      • Q1,Q2Q_1, Q_2 are ion charges.

      • rr is internuclear distance.

    • Opposite charges produce an exothermic (E<0E < 0) attractive interaction; like charges produce an endothermic (E>0E > 0) repulsive interaction.

    • High ion charges produce large EE; large ionic radii (rr) result in smaller EE.

    • Covalent Bonding: Nonmetal atoms share electrons to achieve lower potential energy, also governed by Coulombic forces.

Potential energy profile of hydrogen molecule formation as a function of internuclear distance
  • Potential Energy Dynamics of the H2\text{H}_2 Bond:

    • At large distances: Zero interaction energy (E=0E = 0).

    • As atoms approach: Protons attract the approaching electron cloud; potential energy drops.

    • At optimum distance (0.074 nm=0.74 A˚0.074\,\text{nm} = 0.74\,\text{Å}): Energy reaches a system minimum (−458 kJ/mol-458\,\text{kJ/mol}), defining the stable H—H\text{H—H} bond length.

    • At closer distances: Nucleus-nucleus and electron-electron repulsions dominate, causing potential energy to rise sharply.

    • Electronegativity:

  • Definition: The ability of an atom in a molecule to attract shared electrons to itself.

  • Developed by Linus Pauling (1932) by comparing expected single bond energies with experimentally determined bond energies. Scaled from 0.70.7 (francium, cesium) to 4.04.0 (fluorine).

Electronegativity values of the elements across the periodic table
  • Periodic Trend: Increases across a period from left to right; decreases down a group.

  • Bond Type Prediction Based on Electronegativity Difference (ΔEN\Delta \text{EN}):

    • Zero (None): Pure covalent (nonpolar covalent), e.g., Cl—Cl\text{Cl—Cl}

    • Intermediate: Polar covalent, e.g., H—Cl\text{H—Cl}

    • Large: Ionic, e.g., Na+…Cl−\text{Na}^+ \dots \text{Cl}^-

  • Bond Dipole:

    • In a polar covalent bond, electron density shifts toward the more electronegative atom, creating a partial negative charge (δ−\delta^-), leaving the less electronegative atom with a partial positive charge (δ+\delta^+).

    • Represented by a dipole vector with a crossed positive tail (↦\mapsto) pointing toward the more electronegative atom.

Bond dipole in hydrogen fluoride
  • Ions with Noble Gas Electron Configurations:

    • Nonmetals gain electrons and metals lose electrons to achieve stable, closed-shell configurations:

    • Group 1A: H−\text{H}^-, Li+\text{Li}^+ ([He][\text{He}]); Na+\text{Na}^+ ([Ne][\text{Ne}]); K+\text{K}^+ ([Ar][\text{Ar}]); Rb+\text{Rb}^+ ([Kr][\text{Kr}]); Cs+\text{Cs}^+ ([Xe][\text{Xe}])

    • Group 2A: Be2+\text{Be}^{2+} ([He][\text{He}]); Mg2+\text{Mg}^{2+} ([Ne][\text{Ne}]); Ca2+\text{Ca}^{2+} ([Ar][\text{Ar}]); Sr2+\text{Sr}^{2+} ([Kr][\text{Kr}]); Ba2+\text{Ba}^{2+} ([Xe][\text{Xe}])

    • Group 3A: Al3+\text{Al}^{3+} ([Ne][\text{Ne}])

    • Group 6A: O2−\text{O}^{2-} ([Ne][\text{Ne}]); S2−\text{S}^{2-} ([Ar][\text{Ar}]); Se2−\text{Se}^{2-} ([Kr][\text{Kr}]); Te2−\text{Te}^{2-} ([Xe][\text{Xe}])

    • Group 7A: F−\text{F}^- ([Ne][\text{Ne}]); Cl−\text{Cl}^- ([Ar][\text{Ar}]); Br−\text{Br}^- ([Kr][\text{Kr}]); I−\text{I}^- ([Xe][\text{Xe}])

  • Lewis Structures and Formal Charge:

    • Binary Ionic Compounds:

    • Total electrons transferred is the least common multiple of electrons the metal loses and the nonmetal gains.

    • Example: Aluminum oxide (Al2O3\text{Al}_2\text{O}_3): Each Al\text{Al} atom loses 3 e−3\,e^- (2×3=6 e−2 \times 3 = 6\,e^- lost) while each O\text{O} atom gains 2 e−2\,e^- (3×2=6 e−3 \times 2 = 6\,e^- gained), yielding 2 Al3+2\,\text{Al}^{3+} and 3 O2−3\,\text{O}^{2-}.

    • Octet Rule in Covalent Compounds:

    • Elements in Period 2 must not exceed 88 valence electrons (filling 2s2s and 2p2p orbitals).

    • Octet Exceptions:

      • Beryllium (Be\text{Be}): Forms stable electron-deficient molecules with 22 bonds (44 electrons, e.g., BeCl2\text{BeCl}_2).

      • Boron (B\text{B}): Forms stable molecules with 33 bonds (66 electrons, e.g., BF3\text{BF}_3).

      • Hydrogen (H\text{H}): Follows the duet rule (maximum 11 bond or 22 electrons).

      • Expanded Octets: Elements in Period 3 and below can accommodate more than 88 electrons by utilizing available empty dd orbitals.

    • Systematic Procedure for Drawing Lewis Structures:

    1. Sum valence electrons from all constituent atoms. Add one electron for each unit of negative charge (anions); subtract one electron for each unit of positive charge (cations).

    2. Arrange terminal atoms around a central atom (usually the atom with lowest electronegativity, excluding hydrogen).

    3. Form a single bond (2 e−2\,e^-) between each outer atom and the central atom. Deduct these from total valence count.

    4. Distribute lone pairs to terminal atoms to satisfy the octet rule (duet for hydrogen). Deduct from remaining count.

    5. Place any remaining electrons as lone pairs on the central atom.

    6. If the central atom lacks an octet, convert nonbonding lone pairs from terminal atoms into double or triple bonds.

    • Formal Charge (FC):
          FC=(valence electrons)−12(bonding electrons)−(nonbonding electrons)\text{FC} = (\text{valence electrons}) - \frac{1}{2}(\text{bonding electrons}) - (\text{nonbonding electrons})     FC=(Group #)−(bonds)−(dots)\text{FC} = (\text{Group \#}) - (\text{bonds}) - (\text{dots})

    • The algebraic sum of formal charges must equal the net charge of the molecule or polyatomic ion.

    • Evaluation Rules:

      • Structures minimizing formal charges (closest to zero) are preferred.

      • Negative formal charges should reside on the most electronegative atoms.

      • Positive formal charges should reside on the least electronegative atoms.

Molecular Geometry and VSEPR Theory

  • Valence Shell Electron Pair Repulsion (VSEPR) Theory:

    • Electron pairs around a central atom repel one another electrostatically and orient as far apart as possible in three-dimensional space to minimize repulsion.

    • Steric Number (SN): Determines the electron-pair geometry:
          Steric Number=(# atoms bonded to central atom)+(# lone pairs on central atom)\text{Steric Number} = (\text{\# atoms bonded to central atom}) + (\text{\# lone pairs on central atom})

  • Steric Number Geometries and Examples:

    • Steric Number = 2:

    • Example: Beryllium chloride (BeCl2\text{BeCl}_2)

    • Central atom: Be\text{Be}

    • Bonded atoms: 22

    • Lone pairs: 00

    • Molecular Geometry: Linear

    • Bond Angle: 180∘180^\circ

Linear geometry of BeCl2 with 180 degree bond angle
  • Steric Number = 3:

    • Example 1: Carbonate ion (CO32−\text{CO}_3^{2-})

    • Bonded atoms: 33

    • Lone pairs: 00

    • Molecular Geometry: Trigonal planar

    • Bond Angle: Exactly 120∘120^\circ

    • Example 2: Ozone (O3\text{O}_3)

    • Bonded atoms: 22

    • Lone pairs: 11

    • Molecular Geometry: Bent

    • Bond Angle: Less than 120∘120^\circ (<120∘< 120^\circ), because unshared lone pair electrons exert greater repulsion than bonding pairs, compressing the bond angle.

Bent geometry of ozone with lone pair compressing bond angle below 120 degrees
  • Steric Number = 6:

    • Example: Chlorine pentafluoride (ClF5\text{ClF}_5)

    • Valence electron count: 7+5(7)=42 e−7 + 5(7) = 42\,e^-

    • Bonded atoms: 55

    • Lone pairs: 11

    • Electron-Group Geometry: Octahedral

    • Molecular Geometry: Square pyramidal

    • Bond Angles: Less than 90∘90^\circ (<90∘< 90^\circ) due to repulsion from the axial lone pair.

Square pyramidal geometry of ClF5 with bond angle less than 90 degrees

Bond Energies and Thermochemical Cycles

  • Bond Energy Fundamentals:

    • Definition: The quantity of energy required to homolytically break a chemical bond in the gas phase into two neutral radicals:
          X—Y(g)→X⋅(g)+⋅Y(g)ΔE>0\text{X—Y}(g) \rightarrow \text{X}\cdot(g) + \cdot\text{Y}(g) \quad \Delta E > 0

    • Breaking bonds is strictly endothermic (ΔE>0\Delta E > 0); forming bonds is strictly exothermic (ΔE<0\Delta E < 0).

    • Modern spectroscopy demonstrates that individual bonds in polyatomic molecules dissociate in stepwise fashion:

    • Step 1: CH4(g)→CH3(g)+H(g)ΔE=435 kJ/mol\text{CH}_4(g) \rightarrow \text{CH}_3(g) + \text{H}(g) \quad \Delta E = 435\,\text{kJ/mol}

    • Step 2: CH3(g)→CH2(g)+H(g)ΔE=453 kJ/mol\text{CH}_3(g) \rightarrow \text{CH}_2(g) + \text{H}(g) \quad \Delta E = 453\,\text{kJ/mol}

    • Step 3: CH2(g)→CH(g)+H(g)ΔE=425 kJ/mol\text{CH}_2(g) \rightarrow \text{CH}(g) + \text{H}(g) \quad \Delta E = 425\,\text{kJ/mol}

    • Step 4: CH(g)→C(g)+H(g)ΔE=339 kJ/mol\text{CH}(g) \rightarrow \text{C}(g) + \text{H}(g) \quad \Delta E = 339\,\text{kJ/mol}

    • Total energy: ΔEtotal=1652 kJ/mol\Delta E_{\text{total}} = 1652\,\text{kJ/mol}

    • Average C—H\text{C—H} bond energy:
            Average ΔE=16524=413 kJ/mol\text{Average } \Delta E = \frac{1652}{4} = 413\,\text{kJ/mol}

    • Note: Bond energies apply strictly to gas-phase species.

  • Average Bond Energies Reference (kJ/mol\text{kJ/mol}):

Single Bonds

Energy

Single Bonds

Energy

Single Bonds

Energy

Multiple Bonds

Energy

H—H\text{H—H}

432432

N—H\text{N—H}

391391

I—I\text{I—I}

149149

C=C\text{C=C}

614614

H—F\text{H—F}

565565

N—N\text{N—N}

160160

I—Cl\text{I—Cl}

208208

C≡C\text{C}\equiv\text{C}

839839

H—Cl\text{H—Cl}

427427

N—F\text{N—F}

272272

I—Br\text{I—Br}

175175

O=O\text{O=O}

495495

H—Br\text{H—Br}

363363

N—Cl\text{N—Cl}

200200

—

—

C=O\text{C=O}*

745745

H—I\text{H—I}

295295

N—Br\text{N—Br}

243243

S—H\text{S—H}

347347

C≡O\text{C}\equiv\text{O}

10721072

—

—

N—O\text{N—O}

201201

S—F\text{S—F}

327327

N=O\text{N=O}

607607

C—H\text{C—H}

413413

O—H\text{O—H}

467467

S—Cl\text{S—Cl}

253253

N=N\text{N=N}

418418

C—C\text{C—C}

347347

O—O\text{O—O}

146146

S—Br\text{S—Br}

218218

N≡N\text{N}\equiv\text{N}

941941

C—N\text{C—N}

305305

O—F\text{O—F}

190190

S—S\text{S—S}

266266

C≡N\text{C}\equiv\text{N}

891891

C—O\text{C—O}

358358

O—Cl\text{O—Cl}

203203

—

—

C=N\text{C=N}

615615

C—F\text{C—F}

485485

O—I\text{O—I}

234234

Si—Si\text{Si—Si}

340340

—

—

C—Cl\text{C—Cl}

339339

—

—

Si—H\text{Si—H}

393393

—

—

C—Br\text{C—Br}

276276

F—F\text{F—F}

154154

Si—C\text{Si—C}

360360

—

—

C—I\text{C—I}

240240

F—Cl\text{F—Cl}

253253

Si—O\text{Si—O}

452452

—

—

C—S\text{C—S}

259259

F—Br\text{F—Br}

237237

—

—

—

—

—

—

Cl—Cl\text{Cl—Cl}

239239

—

—

—

—

—

—

Cl—Br\text{Cl—Br}

218218

—

—

—

—

—

—

Br—Br\text{Br—Br}

193193

—

—

—

—

*Note: C=O\text{C=O} in CO2\text{CO}_2 has a specific value of 799 kJ/mol799\,\text{kJ/mol}.

  • Enthalpy Calculation Using Bond Energies:

    • Because enthalpy is a state function, Hess' Law allows reaction enthalpies to be calculated via a hypothetical pathway where all reactant bonds are broken into gas-phase atoms, and all product bonds are subsequently formed:
          ΔHrxn=∑n×D(bonds broken)−∑n×D(bonds formed)\Delta H_{\text{rxn}} = \sum n \times D(\text{bonds broken}) - \sum n \times D(\text{bonds formed})

    • ∑n×D(bonds broken)\sum n \times D(\text{bonds broken}) is the total energy required.

    • ∑n×D(bonds formed)\sum n \times D(\text{bonds formed}) is the total energy released.

    • Worked Example:
          H—C≡N(g)+2H2(g)→CH3NH2(g)\text{H—C}\equiv\text{N}(g) + 2\text{H}_2(g) \rightarrow \text{CH}_3\text{NH}_2(g)

    • Reactant bonds broken:

      • 1×(C—H)=413 kJ1 \times (\text{C—H}) = 413\,\text{kJ}

      • 1×(C≡N)=891 kJ1 \times (\text{C}\equiv\text{N}) = 891\,\text{kJ}

      • 2×(H—H)=2(432)=864 kJ2 \times (\text{H—H}) = 2(432) = 864\,\text{kJ}

      • Total broken = 413+891+864=2168 kJ413 + 891 + 864 = 2168\,\text{kJ}

    • Product bonds formed:

      • 3×(C—H)=3(413)=1239 kJ3 \times (\text{C—H}) = 3(413) = 1239\,\text{kJ}

      • 1×(C—N)=305 kJ1 \times (\text{C—N}) = 305\,\text{kJ}

      • 2×(N—H)=2(391)=782 kJ2 \times (\text{N—H}) = 2(391) = 782\,\text{kJ}

      • Total formed = 1239+305+782=2326 kJ1239 + 305 + 782 = 2326\,\text{kJ}

    • Enthalpy of reaction:
            ΔHrxn=2168 kJ−2326 kJ=−158 kJ\Delta H_{\text{rxn}} = 2168\,\text{kJ} - 2326\,\text{kJ} = -158\,\text{kJ}

  • The Born-Haber Cycle:

    • A thermochemical cycle based on Hess' Law utilized to analyze the energetics of ionic compound formation.

    • Compares the direct standard enthalpy of formation (ΔHf∘\Delta H_f^\circ) of an ionic lattice to a multistep hypothetical pathway starting from elements in their standard states:

    1. Sublimation / Atomization of metal: Conversion of solid metal into gaseous atoms (endothermic).

    2. Ionization of metal: Removal of valence electrons from gaseous metal atoms via ionization energy (endothermic).

    3. Dissociation of nonmetal: Homolytic cleavage of nonmetal bonds using bond dissociation energy to yield gaseous monatomic atoms (endothermic).

    4. Electron affinity of nonmetal: Addition of electrons to gaseous nonmetal atoms (exothermic for first electron).

    5. Lattice energy: Gaseous cations and anions coalesce to form one mole of crystalline solid ionic compound (strongly exothermic).

    • Born-Haber Cycle for Lithium Fluoride (LiF\text{LiF}):

Born-Haber cycle energy level diagram for lithium fluoride
  • Step (1): Sublimation of lithium:
        Li(s)→Li(g)ΔH=+161 kJ\text{Li}(s) \rightarrow \text{Li}(g) \quad \Delta H = +161\,\text{kJ}

  • Step (2): Ionization of gaseous lithium:
        Li(g)→Li+(g)+e−ΔH=+520 kJ\text{Li}(g) \rightarrow \text{Li}^+(g) + e^- \quad \Delta H = +520\,\text{kJ}

  • Step (3): Dissociation of fluorine gas:
        12F2(g)→F(g)ΔH=+77 kJ\frac{1}{2}\text{F}_2(g) \rightarrow \text{F}(g) \quad \Delta H = +77\,\text{kJ}

  • Step (4): Electron affinity of fluorine:
        F(g)+e−→F−(g)ΔH=−328 kJ\text{F}(g) + e^- \rightarrow \text{F}^-(g) \quad \Delta H = -328\,\text{kJ}

  • Step (5): Lattice energy of lithium fluoride:
        Li+(g)+F−(g)→LiF(s)ΔH=−1047 kJ\text{Li}^+(g) + \text{F}^-(g) \rightarrow \text{LiF}(s) \quad \Delta H = -1047\,\text{kJ}

  • Overall standard enthalpy of formation (ΔHf∘\Delta H_f^\circ):
        ΔHf∘=161+520+77−328−1047=−617 kJ\Delta H_f^\circ = 161 + 520 + 77 - 328 - 1047 = -617\,\text{kJ}

    • Comparison Between Magnesium Oxide (MgO\text{MgO}) and Sodium Fluoride (NaF\text{NaF}):

Comparative Born-Haber energy pathways for MgO and NaF
  • Lattice Energy: The lattice energy of MgO\text{MgO} (−3916 kJ/mol-3916\,\text{kJ/mol}) is approximately four times greater than that of NaF\text{NaF} (−923 kJ/mol-923\,\text{kJ/mol}). By Coulomb's Law, lattice energy scales with the product of ionic charges:
      (2+)(2−)=4versus(1+)(1−)=1(2+)(2-) = 4 \quad \text{versus} \quad (1+)(1-) = 1

  • Ionization Energy: Magnesium requires the sum of both first and second ionization energies (I1+I2=2180 kJI_1 + I_2 = 2180\,\text{kJ}), whereas sodium requires only its first ionization energy (495 kJ495\,\text{kJ}).

  • Electron Affinity: Adding two electrons to an oxygen atom is net endothermic (+737 kJ+737\,\text{kJ}) because the second electron affinity (O−+e−→O2−\text{O}^- + e^- \rightarrow \text{O}^{2-}) is strongly endothermic, whereas adding one electron to fluorine is exothermic (−328 kJ-328\,\text{kJ}).

  • Sublimation and Dissociation Energies: Sublimation of Mg\text{Mg} (150 kJ150\,\text{kJ}) is slightly higher than Na\text{Na} (109 kJ109\,\text{kJ}); breaking the double bond in 12O2\frac{1}{2}\text{O}_2 (247 kJ247\,\text{kJ}) requires more energy than 12F2\frac{1}{2}\text{F}_2 (77 kJ77\,\text{kJ}).

  • Enthalpy of Formation Balance: Despite the drastically different energetic contributions at individual steps, the total enthalpy of formation for both compounds is nearly identical:
      ΔHf∘(MgO)=−602 kJ/mol\Delta H_f^\circ(\text{MgO}) = -602\,\text{kJ/mol}   ΔHf∘(NaF)=−570 kJ/mol\Delta H_f^\circ(\text{NaF}) = -570\,\text{kJ/mol}