SoM1 - L23 Extent, Rate, Models, and Manipulation of Dissolution

Fundamentals of Dissolution

  • Dissolution is defined as the transfer of molecules or ions from the solid state into a solution.

  • The importance of understanding solubility and dissolution includes:

    • Formulating effective medicines.

    • Recognizing the significance of solutions as drug delivery vehicles.

    • Identifying factors that affect solubility and dissolution rates.

    • Developing strategies to optimize solution formulation design.

    • Performing quantitative calculations to describe dissolution behavior.

The Dissolution Process and Energetics

  • The process of dissolution involves three distinct physical steps:

    1. Removal of a solute molecule from the solid matrix.

    2. Creation of a cavity within the solvent to accommodate the solute.

    3. Insertion of the solute molecule into the created solvent cavity.

  • Intermolecular forces involved include:

    • Cohesive forces: Solute-Solute interactions (aa) and Solvent-Solvent interactions (bb).

    • Adhesive forces: Solute-Solvent interactions (cc).

  • For dissolution to occur, the cohesive forces (aa and bb) must be overcome and replaced by adhesive forces (cc).

  • Energy exchange in solutions:

    • In an ideal solution, cohesive forces are exactly equal to adhesive forces.

    • Heat of Mixing (ΔHmix\Delta H_{mix}) represents the energy exchange. If ΔHmix\Delta H_{mix} is not zero, the solution is non-ideal.

    • Endothermic Reaction (ΔHmix>0\Delta H_{mix} > 0): Energy must be supplied to form the solution because cohesive forces are stronger than adhesive forces.

    • Exothermic Reaction (ΔHmix<0\Delta H_{mix} < 0): Energy is released during solution formation because adhesive forces are stronger than cohesive forces.

Dissolution Mechanisms and Diffusion

  • Dissolution occurs at the interface between the solid/tablet and the solvent.

  • Boundary Layers: A static boundary layer develops at the solid-solvent interface.

    • CsC_s: The concentration of solubility at the solid/solvent boundary. This layer is often highly concentrated or supersaturated.

    • CC: The concentration of the bulk solution.

    • The difference between CsC_s and CC creates a concentration gradient that drives drug diffusion away from the solid surface.

  • Rate-Determining Step: While the release of solute molecules from the solid into the boundary layer is nearly instantaneous, the diffusion of these molecules across the static boundary layer into the bulk solution is the slowest process. Therefore, diffusion is the rate-determining step for the overall dissolution process.

The Noyes-Whitney Equation

  • The Noyes-Whitney equation describes the rate of dissolution for solids when the process is diffusion-controlled and involves no chemical reaction:

dmdt=D×A×(Cs−C)h\frac{dm}{dt} = D \times A \times \frac{(C_s - C)}{h}

  • Variables and Units:

    • dmdt\frac{dm}{dt}: Rate of dissolution (mg/smg/s).

    • DD: Diffusion coefficient (cm2/scm^2/s).

    • AA: Surface area of the solid (cm2cm^2).

    • CsC_s: Saturation solubility of the drug in the dissolution medium (mg/cm3mg/cm^3).

    • CC: Concentration of drug in the bulk solution at time tt (mg/cm3mg/cm^3).

    • (Cs−C)(C_s - C): Concentration gradient.

    • hh: Thickness of the diffusion (boundary) layer (cmcm).

Sink Conditions

  • Definition: Sink conditions refer to the ability of a solvent to dissolve between 5 to 10 times the total amount of drug being solubilized.

  • Mathematical Simplification: If the volume of the solution is large enough that the bulk concentration (CC) does not exceed 10%10\% of the saturation solubility (CsC_s), then (Cs−C)≈Cs(C_s - C) \approx C_s.

  • The simplified Noyes-Whitney equation under sink conditions is:

dmdt=D×A×Csh\frac{dm}{dt} = \frac{D \times A \times C_s}{h}

  • Achieving Sink Conditions:

    • In vivo: Drug absorption into the bloodstream is often faster than dissolution, maintaining a low bulk concentration.

    • In vitro studies: Achieved through the choice of media, increasing media volume, or frequent sample replacement.

  • Non-sink conditions occur if C>10% of CsC > 10\% \text{ of } C_s. If C=CsC = C_s, the solution is saturated, and the overall dissolution rate becomes zero.

Variables Affecting Dissolution Rate

  • DD (Diffusion Coefficient): Decreased if the viscosity of the medium is increased (e.g., using viscosity modifiers).

  • AA (Surface Area): Increased by micronization of particles or by using amorphous materials.

  • hh (Boundary Layer Thickness): Decreased by increasing agitation (e.g., faster stirring or shaking).

  • CsC_s (Saturation Solubility): Can be altered by changing the pH of the medium, using drug salts, or employing buffers.

  • CC (Bulk Concentration): Decreased by increasing the fluid volume or through drug removal (e.g., drinking water or physiological absorption).

  • As dissolution progresses, CC increases, causing the concentration gradient (Cs−C)(C_s - C) to decrease, which in turn slows the dissolution rate.

Intrinsic Dissolution Rate (IDR)

  • Definition: IDR is the dissolution rate of a pure pharmaceutical active substance when conditions such as surface area, agitation speed, pH, and ionic strength are kept constant. It is a measure independent of variable surface area and agitation.

  • Formula for IDR (kk is the intrinsic dissolution rate constant):

dmdt×A=k×(Cs−C)\frac{dm}{dt \times A} = k \times (C_s - C)

  • Applications: Used to depict drug dissolution behavior, ensure batch-to-batch chemical equivalency, screen drug candidates, and understand solution behavior.

  • Static Disc Method for measurement:

    • A compressed pellet of the drug with a known, fixed surface area is placed in a metal disk.

    • The disk is placed in a dissolution vessel containing fluid at 37 ∘C37\,^{\circ}\text{C}.

    • A rotating paddle (typically at 100 rpm100\text{ rpm}) provides controlled agitation.

Example Calculation: IDR and Diffusion Coefficient

  • Scenario: A 5 g5\,g sample of drug granules with a total surface area of 0.28 m20.28\,m^2 is placed in 500 mL500\,mL water. After 1 minute1\text{ minute}, 0.6 g0.6\,g of drug dissolved. Saturated solubility (CsC_s) is 15 mg/mL15\,mg/mL.

  • Part A: Determine the intrinsic dissolution rate constant (kk).

    1. Check for sink conditions: Concentration (C)=600 mg500 mL=1.2 mg/mL\text{Concentration } (C) = \frac{600\,mg}{500\,mL} = 1.2\,mg/mL. Since 1.2 mg/mL1.2\,mg/mL is less than 10%10\% of 15 mg/mL15\,mg/mL, sink conditions apply.

    2. Use the modified equation: dmdt×A=k×Cs\frac{dm}{dt \times A} = k \times C_s.

    3. Unit conversions: m=600 mgm = 600\,mg, t=60 st = 60\,s, A=0.28 m2=2800 cm2A = 0.28\,m^2 = 2800\,cm^2, Cs=15 mg/cm3C_s = 15\,mg/cm^3.

    4. Calculation:        60060×2800=k×15\frac{600}{60 \times 2800} = k \times 15        3.57×10−3=k×153.57 \times 10^{-3} = k \times 15        k=2.38×10−4 cm/sk = 2.38 \times 10^{-4}\,cm/s

  • Part B: If the boundary layer (hh) is 50 μm50\,\mu m, find the diffusion coefficient (DD).

    1. Unit conversion: h=50 μm=5×10−3 cmh = 50\,\mu m = 5 \times 10^{-3}\,cm.

    2. Relationship: k=Dhk = \frac{D}{h}, so D=k×hD = k \times h.

    3. Calculation:        D=(2.38×10−4)×(5×10−3)D = (2.38 \times 10^{-4}) \times (5 \times 10^{-3})        D=1.19×10−6 cm2/sD = 1.19 \times 10^{-6}\,cm^2/s

Hixson-Cromwell Cube Root Law

  • Purpose: While Noyes-Whitney assumes a constant surface area (valid for static discs), it is untrue for powders where the surface area changes as particles dissolve. The Hixson-Cromwell Cube Root Law accounts for changing surface area.

  • Assumptions:

    • Drug powder consists of uniformly sized particles.

    • Dissolution is based on the cube root of the mass of the particles.

    • Particle radius decreases during the process.

  • Equation:

M03−Mt3=K×t\sqrt[3]{M_0} - \sqrt[3]{M_t} = K \times t

  • Variables:

    • M0M_0: Initial mass of the drug.

    • MtM_t: Mass of the drug remaining undissolved at time tt.

    • KK: Cube root dissolution rate constant (distinct from the IDR constant kk).

  • Graphical Analysis: Plotting the cube root of the undissolved mass (Mt3\sqrt[3]{M_t}) against time (tt) yields a linear plot.

    • Intercept = M03\sqrt[3]{M_0}

    • Gradient = −K-K

Example Calculation: Hixson-Cromwell Law

  • Scenario: 0.5 g0.5\,g of drug powder added to 500 mL500\,mL water. Measured concentrations at specific times:

    • 10 min10\text{ min}: 0.490 mg/mL0.490\,mg/mL

    • 20 min20\text{ min}: 0.784 mg/mL0.784\,mg/mL

    • 30 min30\text{ min}: 0.936 mg/mL0.936\,mg/mL

    • 40 min40\text{ min}: 0.992 mg/mL0.992\,mg/mL

  • Data Processing Table:     | Time (minmin) | Conc (mg/mLmg/mL) | Mass Dissolved (gg) | Mass Undissolved MtM_t (gg) | Mt3\sqrt[3]{M_t}     | :--- | :--- | :--- | :--- | :--- |     | 10 | 0.490 | 0.245 | 0.255 | 0.634 |     | 20 | 0.784 | 0.392 | 0.108 | 0.476 |     | 30 | 0.936 | 0.468 | 0.032 | 0.317 |     | 40 | 0.992 | 0.496 | 0.004 | 0.159 |

  • Results from Excel Plot (y=−0.0158x+0.7929y = -0.0158x + 0.7929):

    • K=0.0158 g1/3 min−1K = 0.0158\,g^{1/3}\,min^{-1}

    • Intercept = 0.79290.7929. Intercept cubed (0.792930.7929^3) = 0.498 g0.498\,g (approximating the initial 0.5 g0.5\,g).

Questions & Discussion

  • Specimen Exam Question: Explain how the following methods, used for measurement of dissolution rate, differ from methods used to measure intrinsic dissolution rate:

    • Beaker method

    • Rotating basket method

    • Flask-stirrer method

    • Paddle method

  • Directed Learning Exercise 1:

    • Sample: Drug granules in 250 mL250\,mL water.

    • Data: After 10 min10\,min, 0.15 g0.15\,g dissolved. Solubility = 8 mg/mL8\,mg/mL. IDR constant (kk) = 2.23×10−5 cm/s2.23 \times 10^{-5}\,cm/s. Boundary layer (hh) = 100 μm100\,\mu m.

    • Tasks: Calculate the total surface area (AA) in m2m^2 and the diffusion coefficient (DD).

  • Directed Learning Exercise 2:

    • Sample: 2.5 g2.5\,g drug with surface area 0.21 m20.21\,m^2 in 500 mL500\,mL water.

    • Data: After 10 min10\,min, 1.2 g1.2\,g dissolved. Solubility = 20 mg/mL20\,mg/mL. Diffusion coefficient (DD) = 4.06×10−7 cm2/s4.06 \times 10^{-7}\,cm^2/s.

    • Tasks: Calculate the intrinsic dissolution rate constant (kk) and the thickness of the boundary layer (hh) in μm\mu m.