Solid State Chemistry: Structure, Symmetry, and Defects
Classification of Solids
Crystalline Solids:
Definite characteristic geometrical shape.
Sharp melting points.
Clean cleavage when cut.
Anisotropic: Physical properties vary with direction.
True solids with long-range order.
Amorphous Solids:
Irregular shape.
Soften over a range of temperatures.
Irregular cleavage.
Isotropic: Properties are independent of direction (e.g., glass).
Pseudo solids or supercooled liquids with short-range order.
Types of Crystals
Molecular Crystals: Lattice points held by Van der Waals forces or dipole-dipole interactions. Soft, low melting points, poor conductors (e.g., , ).
Ionic Crystals: Occupied by positive and negative ions held by electrostatic forces. Hard, brittle, high melting points, conductive in molten/aqueous states (e.g., , , ).
Covalent Crystals: Neutral atoms held by covalent bonds. Hard, high melting points, poor conductors (e.g., Diamond, Graphite).
Metallic Crystals: Positive metal ions in a sea of mobile electrons. High density, malleable, ductile, good conductors (e.g., all metals).
Elements of Symmetry in Crystals
Plane of Symmetry:
Rectangular: Passes through midpoints of opposite faces.
Diagonal: Passes through the diagonal of opposite faces.
Total for a cube: 9 planes.
Rotational Axis of Symmetry:
Two-fold ( rotation): 6 axes.
Three-fold ( rotation): 4 axes.
Four-fold ( rotation): 3 axes.
Six-fold ( rotation).
Centre of Symmetry: A single point such that any line through it meets the crystal surface at equal distances in both directions. Every crystal system has only one.
Crystal Lattices and Unit Cells
Unit Cell: The smallest repeating group characterizes the lattice by edge lengths (, , ) and angles (, , ).
Types of Unit Cells:
Primitive (Simple): Particles only at corners.
Body-Centred (BCC): Corners plus one particle at the body centre.
Face-Centred (FCC): Corners plus one particle at the centre of each face.
End-Centred (ECC): Corners plus particles at the centre of two opposite faces.
Bravais Lattices: There are 14 possible 3D space lattices derived from 7 crystal systems (Cubic, Tetragonal, Orthorhombic, Hexagonal, Rhombohedral, Monoclinic, Triclinic).
Miller Indices and Interplanar Distance
Miller Indices (): Mathematical representation of crystal planes.
Calculation:
Determine intercepts on axes (, , ).
Take reciprocals of intercepts.
Clear fractions using the Least Common Multiple (LCM).
Interplanar Distance () for Cubic Systems:
Density () calculation:
Where is atoms per unit cell, is molar mass, is edge length, and is Avogadro number.
X-Ray Diffraction and Bragg's Law
Bragg’s Equation:
Rotating Crystal Method: Uses a single crystal rotated in a monochromatic X-ray beam.
Powder (Debye–Scherrer) Method: Uses finely ground powder; diffraction peaks identify minerals and lattice spacing.
Close Packing and Voids
1D Packing: Coordination Number () = 2.
2D Packing: Square (), Hexagonal ().
3D Packing:
Simple Cubic (AAA): 52% space occupied ().
Hexagonal Close Packing (HCP - ABAB): 74% efficiency ().
Cubic Close Packing/FCC (ABCABC): 74% efficiency ().
Voids:
Tetrahedral Voids =
Octahedral Voids =
Where is the number of closed spheres.
Radius Ratio Rule
Formula:
0.155 - 0.225: Triangular planar ().
0.225 - 0.414: Tetrahedral ().
0.414 - 0.732: Octahedral ().
0.732 - 1.0: Body-centered cubic ().
Crystal Defects
Stoichiometric Defects:
Schottky Defect: Equal number of missing cations and anions; decreases density (e.g., ).
Frenkel Defect: Cation displaced to an interstitial void; no change in density (e.g., ).
Impurity Defects: Foreign ions occupy lattice sites (e.g., in ).
Non-Stoichiometric Defects:
Metal Excess: Due to anionic vacancies (F-centres, which impart colour) or extra cations at interstitial sites.
Metal Deficiency: Common in transition metals with variable valency (e.g., ).
Questions & Discussion
Q: The spacing of one set of crystal planes in NaCl is . A monochromatic beam produces a Bragg maximum at . Calculate wavelength ().
A: .
Q: A beam of X-rays () is diffracted by (110) plane of rock salt (). Find the glancing angle for second-order diffraction ().
A: Calculate using , then substitute into .