Photosynthesis

1. Photosynthesis: purpose and overall equation

Photosynthesis captures energy from sunlight and uses it to convert carbon dioxide into carbohydrates. It transforms light energy into chemical energy stored in organic molecules.

Plants use the carbohydrates they produce for two main purposes:

  • Energy: carbohydrates can be broken down during cellular respiration to produce ATP.

  • Building materials: carbon from carbohydrates is used to build other molecules, including complex carbohydrates, proteins, and fatty acids.

Overall photosynthesis equation

\[ 6CO_2+6H_2O+\text{light energy} \rightarrow C_6H_{12}O_6+6O_2 \]

Input or product

Role

Carbon dioxide (\(CO_2\))

Supplies the carbon incorporated into sugars.

Water (\(H_2O\))

Supplies electrons and hydrogen for the light reactions.

Light energy

Provides the energy needed to drive photosynthesis.

Glucose (\(C_6H_{12}O_6\))

A carbohydrate that stores chemical energy and supplies carbon for building molecules.

Oxygen (\(O_2\))

Released as a by-product of the light reactions.

Important: The oxygen released during photosynthesis comes from water, not carbon dioxide. Experiments using labeled water and carbon dioxide established this.

Photosynthesis does not simply turn sunlight directly into glucose in one step. It occurs through two connected stages: the light reactions and the Calvin cycle.

Biology 101. Ch. 7 Using Light to Make Food.pdf


2. Energy sources in ecosystems

The slideshow compares two ways organisms can obtain energy to build organic molecules.

Section Objectives Relate the structure of chloroplasts to the events in photosynthesis Describe light-dependent reactions. Explain the reactions and products. -  ppt download

Photoautotrophs

Use light energy to make organic molecules. Examples include plants, algae, and cyanobacteria. In sunlit ecosystems, photosynthesis begins the flow of energy through food webs.

Is Alien Life Hiding Beyond Earth 2.0? - Big Think

Chemoautotrophs

Use energy from chemical reactions rather than sunlight. These are prokaryotes found in places such as hot springs, petroleum deposits, cold seeps, and deep-sea hydrothermal vents.

Chemosynthesis can support ecosystems in dark environments where sunlight is unavailable but substances such as hydrogen sulfide (\(H_2S\)) or methane provide chemical energy.

The slideshow gives this simplified chemosynthesis equation:

\[ 6CO_2+12H_2S\rightarrow C_6H_{12}O_6+6H_2O+12S \]

Quiz takeaway: Photosynthesis uses light as its energy source; chemosynthesis uses energy from chemical reactions.

3. Light and photosynthetic pigments

Photosynthetically active radiation (PAR)

PAR is the part of the electromagnetic spectrum used by photosynthetic organisms. The slideshow identifies the range as 400–700 nanometers (nm).

What do pigments do?

Pigments are molecules that absorb light. When a pigment absorbs a photon, its electrons become excited and move to a higher energy level. That energy can then be used to drive photosynthetic reactions.

The slideshow identifies three pigment groups:

Pigment

Light absorption noted in the slides

Important role

Chlorophyll a

Blue-violet and red

Main photosynthetic pigment involved in capturing light energy.

Chlorophyll b

Blue and orange

Helps absorb light across a different range of wavelengths.

Carotenoids, including beta-carotene

The slides list green

Help capture light and protect the photosynthetic system.

Study note: The slideshow’s pigment color list appears to contain a simplification or error for carotenoids. In standard biology, carotenoids commonly absorb blue to blue-green light and appear yellow, orange, or red. For a quiz based strictly on the slides, check how your instructor expects that item to be answered.

4. Where photosynthesis takes place

In plants and other eukaryotic photoautotrophs, photosynthesis occurs in the chloroplast.

Chloroplast Diagram | Labeled & Unlabeled Free Printable - ConceptVizLeaf Cross-Section 3D: Labeled Leaf Diagram | SciFigChloroplasts | Biologi

6

Know these structures and their functions:

Structure

Function or significance

Outer and inner membranes

Form the double-membrane envelope around the chloroplast.

Stroma

Fluid-filled interior where the Calvin cycle occurs.

Thylakoids

Flattened membrane sacs containing pigments and proteins used in the light reactions.

Thylakoid membrane

Contains photosystems, the electron transport chain, and ATP synthase.

Thylakoid lumen

Space inside the thylakoids where protons accumulate during the light reactions.

Stomata

Openings in leaves that regulate gas exchange and water loss.

Palisade mesophyll

Leaf tissue specialized for photosynthesis, with many chloroplasts.

Spongy mesophyll

Leaf tissue with air spaces that help gases move through the leaf.

The chloroplast's organization makes photosynthesis possible because the light reactions and Calvin cycle occur in different locations but exchange materials.

Memorize this location distinction:

  • Light reactions = thylakoid membrane, involving the thylakoid lumen.

  • Calvin cycle = stroma.

5. The two stages of photosynthesis

Photosynthesis is divided into two stages that depend on one another.

File:Schema della fotosintesi dettaglio.png - Wikimedia Commons

Stage 1: Light-dependent reactions

Location: thylakoid membrane and lumen

Use light energy and water to produce ATP and NADPH. Oxygen is released.

6.3 The Light-Independent Reactions of Photosynthesis: The Calvin Cycle – Introduction to Biology

Stage 2: Calvin cycle

Location: stroma

Uses ATP and NADPH to incorporate carbon dioxide into organic molecules and produce G3P, a sugar precursor.

Products exchanged between the two stages

Light reactions produce

The Calvin cycle uses

ATP

Energy to drive reactions, including RuBP regeneration

NADPH

High-energy electrons and reducing power to help convert carbon compounds into G3P

Oxygen (\(O_2\))

Released as a by-product; it is not the Calvin cycle's main input

After ATP is used, it becomes ADP and phosphate. After NADPH donates its electrons, it becomes NADP\(^+\). These lower-energy forms return to the light reactions to be recharged.

Key concept: Neither stage alone can make sugar from carbon dioxide. The light reactions provide the energy and reducing power; the Calvin cycle uses those resources to build carbon-containing molecules.

Biology 101. Ch. 7 Using Light to Make Food.pdf


6. The light-dependent reactions — products and process

Although the Calvin cycle is our main focus, you need to understand the light reactions because they supply the materials the cycle consumes.

Step 1: Pigments absorb light

Chlorophyll in Photosystem II (PSII) and Photosystem I (PSI) absorbs light. This excites electrons to higher energy levels.

Step 2: Water is split

Water provides replacement electrons for the light reactions. Splitting water also releases hydrogen ions and oxygen.

\[ 2H_2O \rightarrow O_2+4H^++4e^- \]

This equation represents the water-splitting reaction in simplified form.

Products from water splitting: electrons, hydrogen ions (\(H^+\)), and oxygen (\(O_2\)).

Step 3: Electrons travel through the electron transport chain

Excited electrons move between protein complexes and electron carriers in the thylakoid membrane. As electrons lose energy, that energy helps pump protons into the thylakoid lumen.

This creates a proton gradient — a difference in proton concentration across the membrane.

Step 4: ATP synthase makes ATP

Protons flow back across the membrane through ATP synthase. The enzyme uses the energy of that flow to form ATP from ADP and phosphate.

\[ ADP+P_i\rightarrow ATP \]

This process is called photophosphorylation because light energy ultimately powers ATP production.

Step 5: NADPH is formed

At Photosystem I, light re-energizes electrons. These electrons are used to reduce NADP\(^+\), producing NADPH.

\[ NADP^+ + \text{electrons} + H^+ \rightarrow NADPH \]

Light-reaction product summary

Product

What happens to it?

ATP

Supplies energy for the Calvin cycle.

NADPH

Supplies electrons and reducing power for the Calvin cycle.

\(O_2\)

Released as a by-product.

Noncyclic vs. cyclic photophosphorylation

Your slides mention both types. The distinction is useful for understanding why ATP and NADPH production can be adjusted.

Feature

Noncyclic photophosphorylation

Cyclic photophosphorylation

Photosystems involved

PSII and PSI

PSI

Electron pathway

Electrons move from water through the chain and ultimately reduce NADP\(^+\)

Electrons from PSI cycle back through electron carriers

ATP

Produced

Produced

NADPH

Produced

Not produced

Oxygen

Released from water splitting

Not produced by the cyclic pathway

Remember: Noncyclic flow produces ATP, NADPH, and oxygen. Cyclic flow makes additional ATP without making NADPH or oxygen through that pathway.

7. The Calvin cycle — the most important section

The Calvin cycle is a series of enzyme-driven reactions that incorporates inorganic carbon from \(CO_2\) into organic molecules. It takes place in the chloroplast's stroma and is sometimes called the C3 pathway because its first stable product is a three-carbon molecule.

The cycle uses ATP and NADPH from the light reactions. It does not directly require photons at each reaction, but it depends on the products of the light reactions to proceed.

The three phases of the Calvin cycle

CK12-Foundation

Phase 1: Carbon fixation

CO₂ enters

  1. The enzyme RuBisCO attaches \(CO_2\) to a five-carbon molecule called RuBP (ribulose bisphosphate).

  2. The resulting six-carbon intermediate is unstable and splits.

  3. This produces molecules of PGA (3-phosphoglycerate), each containing three carbons.

Key idea: Carbon fixation means incorporating inorganic carbon dioxide into an organic molecule.

Calvin Cycle Reduction Phase Clipart (#5719349) - PinClipart

Phase 2: Reduction / G3P synthesis

ATP and NADPH used

  1. ATP supplies energy to the reactions.

  2. NADPH supplies electrons and reducing power.

  3. PGA is converted through intermediate reactions into G3P (glyceraldehyde-3-phosphate), a three-carbon sugar precursor.

Some G3P can leave the cycle and be used to build carbohydrates and other organic molecules.

Chapter 26: Photosynthesis: Light-independent reactions – Introductory Biology I

Phase 3: Regeneration of RuBP

ATP used

Most of the G3P produced stays in the cycle. Through a series of enzyme-driven reactions, these carbon compounds are rearranged to regenerate RuBP.

Regenerating RuBP is essential because it allows the cycle to accept more \(CO_2\) and continue.

The Calvin cycle's key molecules

Molecule

Carbon count

What to remember

\(CO_2\)

1 carbon

Carbon source entering the cycle

RuBP

5 carbons

Accepts \(CO_2\) at the start of the cycle

PGA

3 carbons

First stable product of carbon fixation

G3P

3 carbons

Sugar precursor that can leave the cycle

ATP

Not a carbon molecule

Provides energy

NADPH

Not a carbon molecule

Provides reducing power/electrons

Very important distinction: PGA is the first stable product after carbon fixation; G3P is the sugar precursor that leaves the cycle to help build carbohydrates.

8. Calvin cycle products and numbers — memorize these

This is one of the most testable parts of your slideshow.

For every 3 molecules of \(CO_2\)

The slideshow specifies that the cycle produces six G3P molecules, but only one exits. The remaining five are used to regenerate RuBP.

Item

Amount per 3 \(CO_2\)

\(CO_2\) entering

3

G3P molecules produced during the reduction phase

6

G3P molecules that leave the cycle

1 net G3P

G3P molecules that remain for regeneration

5

RuBP molecules regenerated

3

ATP consumed

9 ATP

NADPH consumed

6 NADPH

The six G3P molecules contain a total of 18 carbon atoms. One G3P leaving the cycle carries three of those carbons, while the five remaining G3P molecules contain the 15 carbons needed to regenerate three RuBP molecules (each with five carbons).

The five G3P molecules are not a waste product — they are recycled to keep the cycle running.

What is the net product?

The net product is one G3P molecule for every three \(CO_2\) molecules fixed.

G3P can be used to make glucose and other carbohydrates, but it is important not to confuse G3P with glucose itself.

  • G3P = 3 carbons

  • Glucose = 6 carbons

  • Two net G3P molecules provide the six carbons needed to form one glucose molecule.

For every 6 molecules of \(CO_2\)

To obtain enough net G3P to make one six-carbon glucose molecule, the cycle must run twice through the three-\(CO_2\) accounting above.

Item

Amount for 6 \(CO_2\)

\(CO_2\) consumed

6

ATP consumed

18 ATP

NADPH consumed

12 NADPH

Net G3P produced

2 G3P

Carbon in the net G3P

6 carbons, enough for one glucose's carbon skeleton

The last row refers to the carbon skeleton available for glucose synthesis; additional cellular reactions are needed to turn G3P into glucose.

Memory trick: For the Calvin cycle, remember 3–9–6–1:

  • 3 \(CO_2\) enter.

  • 9 ATP are consumed.

  • 6 NADPH are consumed.

  • 1 net G3P exits.

For two net G3P molecules, double everything: 6 \(CO_2\), 18 ATP, 12 NADPH, 2 G3P.

Quick check: carbon accounting

If 3 \(CO_2\) molecules enter, how many G3P molecules leave the cycle as the net product?

1 G3P

3 G3P

6 G3P

Not quite. Six G3P are produced in the reduction phase, but only one is net output. The other five regenerate RuBP.

9. Putting the two stages together: products throughout

This table is especially useful for a quiz that asks which stage produces or consumes a particular molecule.

Molecule

Light reactions

Calvin cycle

\(CO_2\)

Not used as the main carbon input

Consumed during carbon fixation

\(H_2O\)

Consumed; splitting water releases electrons, \(H^+\), and \(O_2\)

Not a main input in the simplified cycle accounting

\(O_2\)

Produced and released

Not produced as the cycle's main output

ATP

Produced

Consumed to drive reactions

ADP + phosphate

Used to make ATP

Produced when ATP is used

NADPH

Produced

Consumed to reduce carbon intermediates

NADP\(^+\)

Used to make NADPH

Produced when NADPH donates electrons

PGA

Not a main product

Produced after carbon fixation

G3P

Not a main product

Produced; one net G3P leaves per 3 \(CO_2\)

RuBP

Not a main product

Regenerated so the cycle can continue

Overall product flow

Light reactions

Light + water

ATP + NADPH + O₂

Calvin cycle

CO₂ + ATP + NADPH

Net G3P

ATP and NADPH are used and returned as ADP and NADP⁺

Carbohydrates and other organic molecules

G3P provides carbon for glucose, other carbohydrates, and plant biomass.

10. RuBisCO and photorespiration

RuBisCO: a key Calvin cycle enzyme

RuBisCO stands for ribulose bisphosphate carboxylase/oxygenase. It catalyzes the first step of the Calvin cycle by attaching carbon dioxide to RuBP.

Its importance is that it helps move carbon from the atmosphere into organic molecules. However, RuBisCO can also react with oxygen, which leads to photorespiration.

What is photorespiration?

Photorespiration occurs when RuBisCO binds oxygen instead of carbon dioxide. This is more likely when the concentration of \(CO_2\) is low and oxygen builds up inside the leaf.

The slideshow describes this sequence:

  1. On hot, dry days, plants may close their stomata to reduce water loss.

  2. Less \(CO_2\) enters the leaf.

  3. Less oxygen exits, so oxygen can accumulate.

  4. RuBisCO may bind \(O_2\) instead of \(CO_2\).

  5. The pathway produces a two-carbon compound that does not lead directly to G3P, consumes ATP, and releases \(CO_2\).

Why it matters: Photorespiration wastes energy and reduces the efficiency of carbon fixation because it consumes ATP and releases carbon dioxide rather than producing the desired net G3P.

Stomata: the trade-off between carbon dioxide and water

Stomata are tiny openings that regulate gas exchange in leaves.

  • When stomata are open, carbon dioxide can enter and oxygen can leave, but water vapor also escapes through transpiration.

  • When stomata close during hot, dry conditions, water loss decreases, but carbon dioxide uptake also decreases.

This creates a challenge: the plant must conserve water without limiting the carbon dioxide needed for photosynthesis.

11. C3, C4, and CAM photosynthesis

The majority of plants use C3 photosynthesis. C4 and CAM pathways are adaptations that help some plants reduce photorespiration, particularly under hot or dry conditions.

Photosynthesis Practice Questions - C3, C4 & CAM Plants - Positive Physics

C3 plants

  • Use RuBisCO to fix \(CO_2\) directly to RuBP.

  • The first stable product is the three-carbon molecule PGA.

  • Can lose efficiency through photorespiration in hot, dry conditions.

PPT - Photosynthesis Chapter 10 Part 2 PowerPoint Presentation, free download - ID:2276390

C4 plants — spatial separation

  • Initially fix \(CO_2\) using PEP carboxylase in mesophyll cells.

  • Produce a four-carbon compound, oxaloacetate, which can be converted into other four-carbon compounds.

  • Deliver concentrated \(CO_2\) to bundle-sheath cells, where RuBisCO can use it in the Calvin cycle.

  • Particularly effective in high light and high temperatures.

サボテンが「夜」に呼吸し、「昼」に働く驚きの理由|多肉植物研究所

CAM plants — temporal separation

  • Open stomata at night to reduce water loss.

  • PEP carboxylase fixes \(CO_2\) into organic acids, including malic acid, which are stored.

  • During the day, stored malic acid is broken down and releases \(CO_2\).

  • The released \(CO_2\) enters the Calvin cycle while stomata remain closed and the light reactions can supply ATP and NADPH.

  • Examples include cacti and many succulents.

C4 vs. CAM — memorize this difference

Feature

C4

CAM

Main strategy

Separates initial carbon fixation from the Calvin cycle by location

Separates initial carbon fixation from the Calvin cycle by time

Initial \(CO_2\) fixation

Mesophyll cells

At night, when stomata are open

Calvin cycle

In bundle-sheath cells

During the day, when stored acids release \(CO_2\)

Benefit

Concentrates \(CO_2\) near RuBisCO

Conserves water by opening stomata at night

Exam phrase: C4 = spatial separation; CAM = temporal separation.

The slides also mention Kranz anatomy, the wreath-like arrangement of bundle-sheath cells around vascular bundles, which is associated with C4 plants.

12. Greenhouse gases and the greenhouse effect

The final slides briefly connect carbon dioxide to Earth's climate.

  • Greenhouse gases absorb and re-emit heat, helping retain warmth in Earth's lower atmosphere.

  • This natural greenhouse effect keeps Earth warm enough to support life.

  • The slides mention a Duke University study in which poison ivy biomass and urushiol production increased under elevated \(CO_2\) conditions.

Connection to photosynthesis: Carbon dioxide is a raw material for carbon fixation, but it is also a greenhouse gas. Its biological role and its role in Earth's climate are related but distinct topics.

13. Final study tables

A. Calvin cycle: key facts

Question

Answer

Where does it occur?

Stroma of the chloroplast

What enters the cycle?

\(CO_2\), ATP, and NADPH

What enzyme fixes carbon?

RuBisCO

What accepts \(CO_2\)?

RuBP, a five-carbon molecule

What is the first stable product?

PGA, a three-carbon molecule

What is the sugar precursor?

G3P, a three-carbon molecule

What are the three phases?

Carbon fixation, reduction/G3P synthesis, RuBP regeneration

What happens to most G3P?

It remains in the cycle to regenerate RuBP

What leaves the cycle?

One net G3P per three \(CO_2\) fixed

What is consumed per three \(CO_2\)?

9 ATP and 6 NADPH

B. Products and their destinations

Product

Produced in

Main purpose or destination

ATP

Light reactions

Used as an energy source in the Calvin cycle

NADPH

Light reactions

Provides electrons for the Calvin cycle

Oxygen

Light reactions

Released as a by-product

PGA

Calvin cycle

Intermediate formed during carbon fixation

G3P

Calvin cycle

Used to build carbohydrates and other organic molecules

RuBP

Regenerated in Calvin cycle

Accepts more \(CO_2\) to continue the cycle

C. Must-know vocabulary

  • Photosynthesis: Capturing light energy to build organic molecules from carbon dioxide.

  • PAR: Photosynthetically active radiation, 400–700 nm.

  • Chlorophyll: Pigment that absorbs light energy.

  • Thylakoid: Membrane structure where the light reactions occur.

  • Stroma: Chloroplast fluid where the Calvin cycle occurs.

  • Photophosphorylation: Production of ATP powered by light-driven processes.

  • Carbon fixation: Incorporating inorganic \(CO_2\) into an organic molecule.

  • RuBisCO: Enzyme that attaches \(CO_2\) to RuBP; can also bind oxygen.

  • RuBP: Five-carbon molecule that accepts \(CO_2\).

  • PGA: Three-carbon first stable product of carbon fixation.

  • G3P: Three-carbon sugar precursor that can leave the Calvin cycle.

  • Photorespiration: Wasteful pathway initiated when RuBisCO binds oxygen.

  • C4 photosynthesis: Uses spatial separation to concentrate carbon dioxide.

  • CAM photosynthesis: Uses temporal separation, fixing carbon dioxide at night.

14. Practice quiz

Test your understanding

10 of 10 answered

1. Where does the Calvin cycle take place?

Thylakoid lumen

Stroma

Inner chloroplast membrane

Cytoplasm

Correct.. The Calvin cycle occurs in the stroma, while the light reactions occur at the thylakoid membrane.

2. Which enzyme initially attaches CO₂ to RuBP?

ATP synthase

PEP carboxylase in all plants

RuBisCO

Chlorophyll

Correct.. RuBisCO catalyzes carbon fixation in the Calvin cycle.

3. What is the first stable product of the Calvin cycle?

Glucose

PGA

RuBP

NADPH

Correct answer: PGA. Carbon fixation produces a three-carbon molecule called PGA.

4. What is the net G3P output when 3 CO₂ enter the Calvin cycle?

One G3P

Three G3P

Six G3P

Two glucose molecules

Correct.. Six G3P are produced during reduction, but five remain for RuBP regeneration. One net G3P leaves.

5. How much ATP and NADPH are consumed per 3 CO₂ fixed?

3 ATP and 6 NADPH

6 ATP and 9 NADPH

9 ATP and 6 NADPH

18 ATP and 12 NADPH

Correct answer: 9 ATP and 6 NADPH. The slideshow gives 9 ATP and 6 NADPH for one net G3P.

6. What is the main role of NADPH in the Calvin cycle?

It supplies oxygen

It absorbs light directly

It supplies electrons and reducing power

It fixes CO₂ to RuBP

Correct.. NADPH supplies the reducing power used to convert carbon intermediates toward G3P.

7. Where does the oxygen released during photosynthesis originate?

CO₂

Glucose

RuBP

Water

Correct answer: Water. Water is split during the light reactions, releasing oxygen.

8. What does photorespiration do?

Produces extra net G3P without energy

Consumes ATP and releases CO₂

Regenerates RuBP without ATP

Makes NADPH in the Calvin cycle

Correct answer: Consumes ATP and releases CO₂. Photorespiration wastes energy and releases CO₂ instead of producing the desired net G3P.

9. What is the defining difference between C4 and CAM photosynthesis?

C4 uses no Calvin cycle

CAM never fixes CO₂

C4 separates processes spatially; CAM separates them temporally

Only CAM uses RuBisCO

Correct.. C4 uses different cell locations; CAM separates initial CO₂ fixation and the Calvin cycle by time.

10. What are the three phases of the Calvin cycle?

Glycolysis, oxidation, fermentation

Carbon fixation, reduction, RuBP regeneration

Light absorption, water splitting, electron release

Translation, transcription, replication

Correct.. The three phases are carbon fixation, reduction/G3P synthesis, and RuBP regeneration.

Score: 6 / 10

Try again

Last-minute review: what to memorize first

  1. Locations: light reactions = thylakoid membrane; Calvin cycle = stroma.

  2. Light-reaction products: ATP, NADPH, and \(O_2\). The oxygen comes from water.

  3. Calvin cycle inputs: \(CO_2\), ATP, and NADPH.

  4. Calvin cycle phases: carbon fixation → reduction/G3P synthesis → RuBP regeneration.

  5. Carbon accounting: 3 \(CO_2\) + 9 ATP + 6 NADPH produce one net G3P.

  6. PGA vs. G3P: PGA is the first stable product; G3P is the sugar precursor that exits.

  7. Photorespiration: RuBisCO binds oxygen, consuming energy and releasing \(CO_2\).

  8. C4 vs. CAM: C4 separates processes by location; CAM separates them by time.

If you are short on study time, focus first on the three Calvin cycle phases, the roles of RuBP/RuBisCO/PGA/G3P, and the 3–9–6–1 product numbers. Those details tie together the process and its products.