Aircraft Inspection Intervals Cheat Sheet
What You Need to Know
Aircraft inspection intervals are the recurring time-based and use-based maintenance/inspection requirements that keep an aircraft airworthy and legal to operate. On exams (and in real ops), the challenge is usually not “what is an inspection?” but:
- Which inspection applies to this operation? (Part 91 vs for-hire; IFR vs VFR; special categories)
- What clock controls it? (calendar months vs hours in service)
- When exactly is it due? (end-of-month rules, grace allowances, ferry rules)
- Who can perform/sign it off? (A&P, IA, repair station, pilot)
Critical reminder: If an item is “out of inspection,” you typically cannot legally operate in the conditions that require that inspection (e.g., IFR without a current altimeter/static test), even if the aircraft otherwise flies fine.
Core idea
You track recurring requirements in three buckets:
- Airframe inspection program (Annual, 100-hour, progressive, approved programs)
- Avionics/IFR system checks (transponder, pitot-static/altimeter, VOR)
- Emergency equipment checks (ELT)
Step-by-Step Breakdown
Use this process to solve almost any “is it legal?” inspection-interval question.
Identify the rule set and operation
- Is this Part 91 private ops, for-hire (still possibly Part 91 but carrying persons for hire), or Part 121/135 (air carrier/commuter/on-demand)?
- Is the flight IFR? (IFR triggers pitot-static/altimeter and VOR check requirements.)
List the inspections that apply (high-yield set)
- Annual inspection (airworthiness baseline)
- 100-hour inspection (if carrying persons for hire or providing flight instruction for hire)
- Transponder test (Mode A/C/S as installed; required in transponder airspace)
- Altimeter system + static system + ATC altitude reporting test (IFR)
- VOR operational check (IFR using VOR)
- ELT inspection
- AD compliance (Airworthiness Directives: due dates/intervals vary)
Determine the controlling “clock”
- Annual/ELT/transponder/altimeter/static: calendar-based
- 100-hour: time-in-service (hours)
- VOR check: days (IFR requirement)
Compute the due date/time correctly
- Calendar-month rule: if due within , it’s due by the **last day of the month** months later.
- Hour-based rule: due at/ before the specified hour (with any allowed overrun only as permitted).
Check for legal “extensions” (don’t overuse these)
- 100-hour: can exceed by up to only to reach a place where the inspection can be done; the excess must be subtracted from the next 100-hour interval.
- Annual: no comparable grace rule.
Verify sign-off authority
- Annual: must be signed off by an IA (Inspection Authorization) or appropriately rated repair station.
- 100-hour: A&P can sign (IA not required).
- Transponder/altimeter/static: generally a certified repair station or appropriately certificated persons per regulations.
- VOR check: can be done by the pilot using approved methods and recorded.
Mini worked method example (calendar-month rule)
If a transponder test is required every and it was done on 2024-04-02, it is valid through 2026-04-30 (end of April 2026).
Key Formulas, Rules & Facts
The “Big Interval” Table (high-yield)
| Item | Interval | Trigger / When required | Governing rule (FAA) | Who signs/records | Notes |
|---|---|---|---|---|---|
| Annual inspection | Most U.S.-registered civil aircraft | 14 CFR 91.409(a) | IA (or repair station) | Due end of month; no grace | |
| 100-hour inspection | time in service | Carrying persons for hire or flight instruction for hire | 14 CFR 91.409(b) | A&P (IA not required) | Can overfly up to to reach inspection; subtract overage from next interval |
| Progressive inspection | Per approved schedule | Alternative to annual/100-hour | 14 CFR 91.409(d) | As specified | Must complete full cycle within required period |
| Other approved inspection programs | Per program | Certain aircraft (e.g., large/turbine) require approved programs | 14 CFR 91.409(e)-(f) | As specified | Program-specific intervals (don’t assume “A/B/C/D” numbers unless provided) |
| Transponder test & inspection | When operating where transponder required | 14 CFR 91.413 | Appropriately certificated/repair station | Applies to installed transponder; ties to 91.215 use | |
| Altimeter + static system + ATC altitude reporting test | IFR in controlled airspace (as applicable) | 14 CFR 91.411 | Appropriately certificated/repair station | Often tested with pitot-static/encoder checks | |
| VOR operational check | IFR using VOR system | 14 CFR 91.171 | Pilot records check | Must log date, place, error, signature | |
| ELT inspection | Aircraft with ELT installed (most) | 14 CFR 91.207 | Appropriately certificated person | Includes battery condition, controls, crash sensor |
Exam pattern: If the question says “IFR flight,” immediately think: (91.411), (91.171), plus the normal airframe inspection.
Calendar-month rule (how to compute fast)
If something is due within and last done on some day in month :
- It is valid through the last day of month .
You can write it as:
100-hour “ferry-to-inspection” allowance (common trap)
You may exceed the by up to:
…but only to reposition to a place where the inspection can be done.
Then:
Example: inspection due at , flown to to reach maintenance. Next interval is:
Airworthiness Directives (ADs): interval depends on the AD
- ADs can be one-time, repetitive (e.g., every , ), or condition-based.
- If an AD says “whichever occurs first,” it means exactly that.
- Exams love to hide AD noncompliance as the real reason the aircraft is not airworthy.
Special categories worth knowing (only the interval concept)
- Experimental aircraft commonly require a condition inspection every per operating limitations (not the same sign-off as an annual).
- Special Light-Sport Aircraft (S-LSA) have a required annual condition inspection within the preceding (rule set differs from standard category; know it exists).
Examples & Applications
Example 1: Annual inspection expiration
Scenario: Annual completed on 2025-01-10.
Setup: Annual interval is .
Answer: Valid through 2026-01-31 (end of January 2026).
Key insight: Calendar-month inspections don’t expire on the same day number; they expire at month-end.
Example 2: IFR legality check (altimeter/static + VOR)
Scenario: You want to fly IFR today (2026-10-01). Last altimeter/static test was 2024-10-15. Last VOR check was 2026-09-10.
Setup:
- 91.411 requires → valid through 2026-10-31.
- 91.171 requires → check on 2026-09-10 is valid through 2026-10-10.
Conclusion: IFR is legal today (both current).
Key insight: IFR legality often fails on VOR (days) even when the tests are current.
Example 3: 100-hour overrun math
Scenario: Aircraft used for flight instruction for hire. 100-hour due at . It arrives at the maintenance airport at .
Setup: Allowed reposition overrun up to .
Result: Legal to fly to maintenance (if that flight is solely to reach inspection). Next 100-hour interval is:
So next 100-hour is due at:
Key insight: The overage is “paid back” immediately in the next interval.
Example 4: Transponder requirement vs transponder inspection currency
Scenario: Your airplane’s transponder test expired last month. You plan to fly in airspace that requires a transponder.
Key insight:
- 91.413 makes the transponder test a requirement to use the transponder for operations where it is required.
- If the operation requires a transponder and yours is out of inspection, you generally cannot legally make that flight in that airspace (even if the airplane is otherwise airworthy for VFR elsewhere).
Common Mistakes & Traps
Mixing up “calendar months” with “days”
- Wrong move: Counting for an annual or for a check.
- Why wrong: The rule is calendar months, expiring at month-end.
- Fix: Always convert to “end of month months later.”
Assuming the grace applies to annual inspections
- Wrong move: Flying past an annual due date “just to get to maintenance.”
- Why wrong: The allowance is a 100-hour feature (with conditions), not an annual feature.
- Fix: Treat annual expiration as a hard stop unless a specific ferry authorization applies.
Forgetting that 100-hour is triggered by purpose, not aircraft type
- Wrong move: Thinking “only charter aircraft need 100-hour.”
- Why wrong: The trigger is carrying persons for hire or instruction for hire (91.409(b)).
- Fix: When you see “flight school,” “rental with instructor,” or “for-hire,” check 100-hour.
Not subtracting the 100-hour overage from the next interval
- Wrong move: Doing the inspection at and then planning next due at .
- Why wrong: Regulations require the overage be included in the next interval.
- Fix: Compute .
Thinking a VOR check is only required for filing IFR (it’s required for IFR using VOR)
- Wrong move: “I filed IFR but I’ll just use GPS, so I don’t need a VOR check.”
- Why wrong/tricky: The rule is about using VOR for IFR; exams may specify you’ll track VOR radials or fly a VOR approach.
- Fix: If the scenario includes VOR navigation or approach, enforce VOR check.
Confusing transponder test (91.413) with altimeter/static test (91.411)
- Wrong move: Believing a current transponder test means encoder/static system is good for IFR.
- Why wrong: They’re separate compliance items, both often , but not interchangeable.
- Fix: Track them as distinct line items.
Ignoring ADs because “the annual was signed off”
- Wrong move: Assuming annual sign-off guarantees all ADs complied with.
- Why wrong: AD compliance is mandatory and may have its own repeating interval.
- Fix: Always ask: “Any recurring AD due by hours/months/cycles?”
Missing the recordkeeping requirement (especially VOR checks)
- Wrong move: Doing a VOR check but not logging the required details.
- Why wrong: A check without the required record is effectively worthless for proving compliance.
- Fix: Log date, place, error, and signature (and keep it accessible).
Memory Aids & Quick Tricks
| Trick / mnemonic | What it helps you remember | When to use it |
|---|---|---|
| “12-100-24-24-30-12” | **Annual ; 100-hour ; Transponder ; Altimeter/static ; VOR ; ELT | Rapid recall under exam pressure |
| “Month-end means calendar” | Calendar-month intervals expire at end of the month, not on the day number | Annual, ELT, transponder, altimeter/static |
| “100-hour has the -hour mercy” | Only the 100-hour inspection has the limited reposition allowance | Any question involving |
| “IFR = + ” | IFR currency typically hinges on (91.411) plus (91.171 if using VOR) | IFR legality scenarios |
| “ADs override vibes” | Even if everything else is current, an overdue AD makes it noncompliant | Airworthiness determination questions |
Quick Review Checklist
- Annual inspection: within (end-of-month expiry); signed by IA.
- 100-hour inspection: at for-hire/instruction-for-hire ops; reposition allowance; subtract overage from next interval.
- Transponder (91.413): if operating where a transponder is required.
- Altimeter/static/altitude reporting (91.411): for IFR as applicable.
- VOR (91.171): ; must be logged; applies when using VOR for IFR.
- ELT (91.207): inspect within ; know battery-related requirements exist.
- AD compliance: interval is AD-specific; “whichever occurs first” means you must track both clocks.
- Always confirm which clock applies: calendar months vs hours vs days.
You’ve got this: if you can identify the operation, pick the right clock, and apply month-end math, you’ll crush the inspection-interval questions.