Chapter 5 Readings: 5.7 Drawing Free-Body Diagrams

Learning Objectives

  • Explain the rules for drawing a free-body diagram.

  • Construct free-body diagrams for different situations.

Overview of Free-Body Diagrams

  • The first step in describing and analyzing most phenomena in physics involves the careful drawing of a free-body diagram.

  • A free-body diagram must only include the external forces acting on the body of interest.

  • Once an accurate free-body diagram is drawn, standard physical laws are applied based on the dynamic state of the object:

    • If the body is in equilibrium (balanced forces), apply Newton's first law where Fnet=0F_{\text{net}} = 0.

    • If the body is accelerating (unbalanced force), apply Newton's second law where Fnet≠0F_{\text{net}} \neq 0.

Problem-Solving Strategy: Constructing Free-Body Diagrams

Observe the following four rules when constructing a free-body diagram:

  1. Identify and Draw the Object:

    • Draw the object under consideration; it does not have to be artistic.

    • At first, drawing a circle around the object of interest helps ensure focus on labeling only the forces acting directly on that object.

    • If treating the object as a particle (having no size, shape, or rotation), represent the object as a point.

    • Place this point at the origin of an xyxy-coordinate system, which should be included in the free-body diagram.

  2. Include All External Forces:

    • Include all forces that act on the object, representing these forces as vector arrows.

    • Consider common types of forces: normal force, friction, tension, spring force, weight, and applied force.

    • Do not include the net force (FnetF_{\text{net}}) on the object.

    • With the exception of gravity, all forces require direct contact with the object.

    • Forces that the object exerts on its environment must not be included.

    • Never include both forces of an action-reaction pair on the same diagram.

  3. Resolve Forces into Components:

    • Convert the free-body diagram into a more detailed diagram showing the xx- and yy-components of a given force, which is often helpful when solving problems using Newton's first or second law.

    • Place a squiggly line through the original vector to indicate that it is no longer in play, as it has been replaced by its xx- and yy-components.

  4. Multiple Objects and Acceleration Handling:

    • If there are two or more objects (bodies) in the problem, draw a separate free-body diagram for each object.

    • Acceleration Note: If there is acceleration, do not directly include it in the free-body diagram as a force vector. However, it may be helpful to indicate acceleration outside the free-body diagram, optionally labeled in a different color to distinguish it from force vectors.

Application Example: Sled Pulled at an Angle

  • Physical Scenario: A moving sled of mass 15 kg15\,\text{kg} is pulled by a force P⃗\vec{\mathbf{P}} directed at an angle of 30∘30^\circ relative to the horizontal surface.

  • Step 1 & 2 (Free-Body Diagram): The sled is represented as a point at the origin of an xyxy-coordinate system. The external forces drawn are:

    • Normal force N⃗\vec{\mathbf{N}} pointing vertically upward.

    • Weight w⃗\vec{\mathbf{w}} pointing vertically downward.

    • Pulling force P⃗\vec{\mathbf{P}} pointing upward and to the right at an angle of 30∘30^\circ.

  • Step 3 (Force Components Diagram): The vector P⃗\vec{\mathbf{P}} is replaced by its orthogonal components:

    • Horizontal component P⃗x\vec{\mathbf{P}}_x along the positive xx-axis.

    • Vertical component P⃗y\vec{\mathbf{P}}_y along the positive yy-axis.

    • A squiggly line is drawn across the original force vector P⃗\vec{\mathbf{P}} to signify that it has been resolved into components and removed from direct calculation.

A moving sled shown in (a), its free-body diagram in (b), and its free-body diagram with force components in (c).

Example 5.14: Two Blocks on an Inclined Plane

  • Problem Context: Construct the free-body diagrams for object A and object B on an inclined plane. Assume that a rope pulls object A so that it slides upward along the slope, and object B is sliding down the slope relative to the ramp.

  • Strategy: Apply the four-step problem-solving strategy independently to object A and object B.

  • Free-Body Diagram for Object A:

    • Object A is isolated (circled) and represented by a dot.

    • Forces acting on object A:

    • Weight pointing vertically downward.

    • Tension pointing away from object A along the cord (up the incline).

    • Normal force NABN_{\text{AB}} directed away from the interface with object B.

    • Friction force fBAf_{\text{BA}} exerted by object B on object A. Because object A slides upward relative to object B, fBAf_{\text{BA}} acts downward parallel to the inclined plane.

  • Free-Body Diagram for Object B:

    • Object B experiences forces from two distinct contact surfaces:

    • Interface with the inclined plane: exerts external normal force NBN_{\text{B}} (perpendicular to the ramp) and friction force fBf_{\text{B}} (acting up the ramp to oppose object B's motion down the slope).

    • Interface with object A: exerts normal force NABN_{\text{AB}} (directed away from object B) and friction force fABf_{\text{AB}}.

    • Friction force fABf_{\text{AB}} opposes the relative motion of object B with respect to object A; since object B moves downward relative to A, fABf_{\text{AB}} acts to the right (upward parallel to the interface).

  • Newton's Third Law and Friction Direction Analysis:

    • Friction always acts opposite the direction of motion or intended relative motion.

    • The friction force exerted by object A on object B (fABf_{\text{AB}}) and the friction force exerted by object B on object A (fBAf_{\text{BA}}) form a Newton's third-law action-reaction pair: these two forces must be in opposite directions.

    • Because object B is sliding down the incline, the friction force exerted on it by the ramp (fBf_{\text{B}}) acts up the ramp.

  • Significance & Key Takeaways:

    • Circling individual objects focuses attention strictly on external forces acting on that specific body, preventing the inclusion of non-acting forces or internal forces.

    • If objects were stationary rather than sliding as described, additional information regarding tension force magnitude would be required to determine static friction directions.

Example 5.15: Two Blocks in Contact

  • Problem Context: A force is applied to two blocks in contact with each other. Draw the reaction forces between the two blocks.

  • Strategy: Construct individual free-body diagrams for each block, applying Newton's third law at the contact interface.

  • Solution & Force Relations:

    • Vector A⃗21\vec{\mathbf{A}}_{21} represents the action force exerted by block 2 on block 1.

    • Vector A⃗12\vec{\mathbf{A}}_{12} represents the reaction force exerted by block 1 on block 2.

    • According to Newton's third law, these contact forces are equal in magnitude and opposite in direction.

    • These free-body diagrams are used to set up equations in Applications of Newton's Laws.

Example 5.16: Block on the Table (Coupled Blocks)

  • Problem Context: A block rests on a table and is attached to a light rope running over a pulley. The other end of the rope attaches to a second block (m2m_2). The two blocks are coupled. Block m2m_2 exerts a force due to its weight, which causes the entire system (two blocks and a string) to accelerate.

  • Strategy: Assume the string is massless so that it does not need to be considered as a separate object. Draw a free-body diagram for each block.

  • Solution & Acceleration Analysis:

    • Block m1m_1 and block m2m_2 undergo acceleration vectors a⃗1\vec{\mathbf{a}}_1 and a⃗2\vec{\mathbf{a}}_2, respectively.

    • Assuming the string remains taut, the magnitudes of acceleration are equal: ∣a⃗1∣=∣a⃗2∣|\vec{\mathbf{a}}_1| = |\vec{\mathbf{a}}_2|.

    • The common acceleration magnitude can simply be called aa (or vector a⃗\vec{\mathbf{a}}).

  • Significance & Tension Properties:

    • Two free-body diagrams are used because finding tension TT usually requires a system of two equations.

    • For a massless string, the tension TT is the same on both m1m_1 and m2m_2.

Check Your Understanding 5.10

  • Problem Requirements:

    • (a) Draw the free-body diagram for the situation shown.

    • (b) Redraw it showing components; use xx-axes parallel to the two ramps.

Interactive Simulation & Graphing

  • Interactive Objectives:

    • Engage the simulation to predict qualitatively how an external force affects the speed and direction of an object's motion.

    • Explain the effects with the help of a free-body diagram.

    • Use free-body diagrams to draw position (xx), velocity (vv), acceleration (aa), and force (FF) graphs, and vice versa.

    • Explain how the graphs relate to one another.

    • Given a scenario or a graph, sketch all four graphs.