Optics - Wave Interference and Newton's Rings
Fundamentals of Light Interference
Definition of Interference:
When two light waves superimpose, the resultant amplitude and intensity in the region of superposition differ from those of the individual waves.
This modification in the spatial distribution of light intensity resulting from wave superposition is defined as interference.

Necessary Conditions for Sustained Interference:
Continuous Emission: The two interfering sources must continuously emit light waves of the exact same wavelength or frequency.
Equal Amplitudes: The amplitudes of the two waves should be equal or nearly equal. This ensures maximum contrast between intensity maxima and minima, preventing general background illumination.
Coherence: The sources emitting light must be strictly coherent.
Narrow Sources: The source openings must be extremely narrow. A broad light source behaves as an infinite collection of independent narrow sources lying side by side, which overlays multiple non-coherent interference patterns and destroys the contrast, leading to uniform illumination.
Small Separation Distance: The two sources emitting the interfering beams must be situated very close to each other, ensuring that the intersecting wavelengths meet at extremely small angles.
Coherent Sources:
Two optical sources are defined as coherent if they emit light waves characterized by:
The exact same frequency or wavelength (monochromatic light).
Equal or nearly equal amplitudes.
A constant phase difference over time.
Independent physical sources can never be truly coherent due to continuous random atomic emissions.
In experimental arrangements, coherent sources are produced by generating two virtual or real secondary sources from a single primary light source.
Source slits must remain narrow and closely spaced because the wavelengths of visible light are extremely small, on the order of .
Methods of Generating Coherent Sources
Division of Wavefront:
The localized wavefront originating from a single primary light source is geometrically split into two spatial components.
These divided wavefront portions travel along different optical paths before reuniting at an angle to form interference fringes on a screen.
Classic examples include Young's Double Slit Experiment and Fresnel's Biprism.
Path Difference Formula: where is the distance of a fringe from the central axis, is the separation between the two slits, and is the distance between the sources and the viewing screen.
Fringe Width (): The spatial separation between any two consecutive intensity maxima (bright fringes) or intensity minima (dark fringes) is constant and expressed by:
Division of Amplitude:
The amplitude of an incoming single light beam is divided into two or more parts by partial reflection and partial transmission (refraction) at boundary surfaces.
The separated beams propagate along different optical paths and subsequently recombine to produce interference.
Classic examples include interference in thin parallel films, wedge-shaped films, and Newton's rings.
Path Difference Formula: where is the refractive index of the film medium, is the physical thickness of the film, and is the angle of refraction inside the film.
Conditions for Intensity Maxima and Minima
Relation Between Phase Difference and Path Difference:
A path length difference equal to one full wavelength () corresponds to a phase difference of .
For any arbitrary path difference , the corresponding phase difference is given by:
General formulation:

Condition for Intensity Maxima (Constructive Interference):
Occurs at points where the phase difference between arriving waves is an integral multiple of :
Correspondingly, the optical path difference must be an integer multiple of the wavelength:
Condition for Intensity Minima (Destructive Interference):
Occurs at points where the phase difference between arriving waves is an odd integral multiple of :
Correspondingly, the optical path difference must be an odd multiple of half-wavelengths:
Thin Film Interference
Mechanism of Thin Film Reflection:
Brilliant structural colors observed in soap bubbles or thin oil slicks on water arise from interference between light waves reflected from the front surface and the rear surface of a thin transparent film.
An incident ray impinging on the upper boundary of a transparent film with thickness undergoes partial reflection and partial refraction.
The refracted component traverses the film, reflects off the secondary lower boundary, travels back through the film, and exits into the original medium parallel to the first reflected ray.
The two emerging reflected rays possess an optical path difference governed by the film thickness , the refractive index , and the angle of refraction

Derivation of Path Difference in Thin Parallel Film (Reflected System):

Consider a thin transparent parallel film of uniform thickness and refractive index .
Incident ray at angle reflects partially along and refracts along at angle
At point on the lower surface, the ray reflects internally along and exits the upper surface at point along
To calculate the path difference between reflected rays and :
Draw perpendicular from to ray
Draw perpendicular from to segment
Produce downward to meet the perpendicular line dropped from at point , creating
The geometric optical path difference between ray and ray is:
Applying Snell's Law:
Substituting into the path difference equation:
From geometry, , so:
In right-angled triangle :
Since , it follows that .
Thus, the geometric optical path difference is:
Application of Stokes' Law:
Stokes' Law states that when a light ray undergoes reflection at the surface of an optically denser medium (a medium with a higher refractive index), it suffers a phase change of , which is equivalent to an additional optical path difference of .
Ray reflects at the top surface (rare-to-dense interface) and undergoes a phase shift.
Ray reflects internally at the bottom surface (dense-to-rare interface) and undergoes no phase shift.
The net effective optical path difference becomes:
Conditions for Bright and Dark Fringes in Reflected Light:
Bright Fringe (Constructive Interference / Maxima):
Dark Fringe (Destructive Interference / Minima):
Origin of Colors in Thin Films:
When illuminated by polychromatic (white) light, thin films exhibit distinct multi-colored patterns.

White light splits into various component wavelengths upon reflection at the upper and lower surfaces.
The reflected light intensity for any specific color depends on , , and
If thickness and viewing angle are fixed at a specific spot, the path difference condition is satisfied only for specific wavelengths . Those wavelengths are strongly reflected and determine the observed color.
Wavelengths satisfying the destructive interference condition are completely absent from the reflected light.
Changing the eye's observation position alters the refraction angle , causing different color combinations to satisfy the maxima conditions across different areas of the film.
Interference in Wedge-Shaped Thin Films
Physical Configuration:
Formed by placing two flat glass plates together at one edge while keeping them separated by a thin spacer (such as a paper strip) at the opposite edge.
The enclosed medium (usually air) forms a thin film of continuously varying thickness with a wedge angle

Optical Path Difference:
For a wedge film of angle , the optical path difference between reflected rays at a distance from the contact line (where thickness ) is:
For light at near-normal incidence () and very small wedge angles (),
Including Stokes' Law phase shift of for reflection off the lower dense boundary:
Fringe Conditions for Wedge Film:
Maxima (Bright Fringe):
Minima (Dark Fringe):
Derivation of Fringe Width ():
Let be the position of the dark fringe from the apex contact line:
Let be the position of the dark fringe:
The spacing across fringes is:
Setting yields the fringe width
If the surfaces forming the wedge are perfectly flat planes, the resulting interference fringes of equal thickness form straight, equally spaced parallel lines.
Newton's Rings
Experimental Setup and Principle:
Created when the convex surface of a long focal length plano-convex lens rests on an optically flat glass plate.

An air film of radially increasing thickness is enclosed between the spherical lens surface and the flat plate.
Film thickness at the central point of contact and grows progressively larger moving outward radially.
Illumination by monochromatic light at normal incidence produces a series of concentric dark and bright circular interference fringes centered on

Formation of Interference Rings:
Monochromatic light ray strikes the upper surface of the lens normally.
At point (glass-air interface), part of the light reflects without phase change as ray
The transmitted portion crosses air film thickness , strikes point (air-glass plate interface), undergoes reflection with a phase shift ( path difference), and emerges as ray
Rays and superimpose to form interference patterns.
Total path difference for normal incidence (, ) in an air film ():
At contact point (), path difference , satisfying the destructive interference condition. Thus, the central spot is always dark in reflected light.
Condition for bright ring (maxima):
Condition for dark ring (minima):
Derivation of Ring Diameters:

Let be the radius of curvature of the spherical lens surface.
Let be the radius of a Newton's ring corresponding to film thickness
From circle geometry principles (
Since , the term is negligible relative to
Expressing in terms of ring diameter (hence ):
Mathematical Relations for Bright Rings:

Equating path difference expressions for a film of refractive index
Proportionalities for bright ring diameters:
Mathematical Relations for Dark Rings:

Equating path difference expressions for dark rings:
Proportionalities for dark ring diameters:
Ring spacing narrows as order increases, causing higher-order rings to become thinner and packed closer together.
Applications of Newton's Rings
Determination of Monochromatic Light Wavelength () or Radius of Curvature ():
For an air film (), measure diameters of and dark rings:
Subtracting the two equations:
Wavelength formula:
Radius of curvature formula:
Determination of Refractive Index () of a Liquid:
First measure and dark ring diameters with air between lens and plate:
Introduce liquid between lens and glass plate. Measure new ring diameters and
Divide the air-film difference by the liquid-film difference:
Newton's Rings under White Light Illumination:

When illuminated by white light (e.g., mercury arc lamp), concentric multi-colored rings form around a central dark spot.
Because ring diameters scale with , each color component forms its own distinct ring set size.
Only the first few inner rings are sharp and distinct; higher orders overlap into a continuous uniform white field.