Comprehensive Study Guide to Acids, Bases, Equilibrium, and Physiological Buffer Systems

Fundamental Definitions and Models of Acids and Bases

  • Arrhenius Definition of Acids and Bases:

    • Acid: A substance containing at least one hydrogen atom that dissolves in water to release a hydrogen ion (H+H^+):     HCl(g)→H+(aq)+Cl−(aq)HCl(g) \rightarrow H^+(aq) + Cl^-(aq)

    • Base: A substance containing a hydroxide group that dissolves in water to release a hydroxide ion (OH−OH^-):     NaOH(s)→Na+(aq)+OH−(aq)NaOH(s) \rightarrow Na^+(aq) + OH^-(aq)

    • Limitations of the Arrhenius Model: The Arrhenius model is restricted entirely to aqueous solutions and fails to accurately describe the physical state of the hydrogen ion. A bare proton (H+H^+) does not exist freely in aqueous solution due to its exceptionally high charge density; instead, it immediately hydrates and bonds with a solvent water molecule to form the hydronium ion (H3O+H_3O^+):     H+(aq)+H2O(l)→H3O+(aq)H^+(aq) + H_2O(l) \rightarrow H_3O^+(aq)

  • Brønsted–Lowry Definition of Acids and Bases:

    • Brønsted–Lowry Acid: A substance that acts as a proton donor (H+H^+ donor). A Brønsted–Lowry acid must contain at least one hydrogen atom.

    • Brønsted–Lowry Base: A substance that acts as a proton acceptor (H+H^+ acceptor). A Brønsted–Lowry base must possess at least one available nonbonding electron pair (lone pair) capable of forming a coordinate covalent bond with an incoming proton (H+H^+).

    • Proton Transfer Reaction: In an aqueous Brønsted–Lowry reaction, the acid transfers a proton directly to the base:     HCl(g)+H2O(l)→H3O+(aq)+Cl−(aq)HCl(g) + H_2O(l) \rightarrow H_3O^+(aq) + Cl^-(aq)

    • HClHCl functions as the Brønsted–Lowry acid because it donates a proton to the water solvent.

    • H2OH_2O functions as the Brønsted–Lowry base because its oxygen atom uses a lone pair of electrons to accept the proton.

  • Common Brønsted–Lowry Acids:

    • Hydrochloric acid (HClHCl)

    • Hydrobromic acid (HBrHBr)

    • Hydroiodic acid (HIHI)

    • Nitric acid (HNO3HNO_3)

    • Sulfuric acid (H2SO4H_2SO_4)

    • Acetic acid (CH3COOHCH_3COOH), in which the hydrogen atom bonded to the electronegative carboxyl oxygen is the acidic proton.

    • Citric acid (C6H8O7C_6H_8O_7)

    • Carbonic acid (H2CO3H_2CO_3)

Everyday examples of Brønsted-Lowry acids including vinegar, citrus fruits, and carbonated beverages
  • Common Brønsted–Lowry Bases:

    • Neutral Molecular Bases: Ammonia (NH3NH_3) and water (H2OH_2O). In ammonia, the nitrogen atom carries a lone pair of electrons that forms a new covalent bond to an incoming proton:     NH3+H2O(l)⇌NH4+(aq)+OH−(aq)NH_3 + H_2O(l) \rightleftharpoons NH_4^+(aq) + OH^-(aq)

    • Ionic Hydroxide Salts: Sodium hydroxide (NaOHNaOH), potassium hydroxide (KOHKOH), magnesium hydroxide (Mg(OH)2Mg(OH)_2), and calcium hydroxide (Ca(OH)2Ca(OH)_2). In each metal hydroxide salt, the released hydroxide ion (OH−OH^-) acts as the Brønsted–Lowry base by accepting a proton.

    • Consumer Antacids and Cleaners: Common household bases include calcium carbonate (CaCO3CaCO_3) in antacid chewables (e.g., Rolaids), aqueous ammonia (NH3NH_3) in window cleaners (e.g., Windex), and sodium hydroxide (NaOHNaOH) in drain openers (e.g., Drāno).

Household products containing Brønsted-Lowry bases including antacids, ammonia cleaner, and drain opener

Chemical Nomenclature of Inorganic Acids

  • Derivation from Anion Names: The systemic naming of common binary and oxoacids is directly determined by the suffix of the anion produced upon complete aqueous dissociation:

    • Anions ending in "-ide": Converted to acids using the prefix hydro-, replacing the suffix with -ic acid:

    • Chloride (Cl−Cl^-) forms hydrochloric acid (HClHCl).

    • Bromide (Br−Br^-) forms hydrobromic acid (HBrHBr).

    • Iodide (I−I^-) forms hydroiodic acid (HIHI).

    • Cyanide (CN−CN^-) forms hydrocyanic acid (HCNHCN).

    • Anions ending in "-ate": Converted to acids by changing the suffix directly to -ic acid (omitting any "hydro-" prefix):

    • Sulfate (SO42−SO_4^{2-}) forms sulfuric acid (H2SO4H_2SO_4).

    • Nitrate (NO3−NO_3^-) forms nitric acid (HNO3HNO_3).

    • Carbonate (CO32−CO_3^{2-}) forms carbonic acid (H2CO3H_2CO_3).

    • Phosphate (PO43−PO_4^{3-}) forms phosphoric acid (H3PO4H_3PO_4).

    • Acetate (CH3COO−CH_3COO^-) forms acetic acid (CH3COOHCH_3COOH).

    • Anions ending in "-ite": Converted to acids by changing the suffix directly to -ous acid:

    • Sulfite (SO32−SO_3^{2-}) forms sulfurous acid (H2SO3H_2SO_3).

    • Nitrite (NO2−NO_2^-) forms nitrous acid (HNO2HNO_2).

Rules for deriving acid names from anion suffixes

Proton Transfer Dynamics and Conjugate Acid–Base Pairs

  • Mechanistic Principles of Conjugate Pairs:

    • Every Brønsted–Lowry acid–base reaction involves two conjugate acid–base pairs related entirely by the transfer of a single proton (H+H^+):

    • One pair functions in the forward direction.

    • The opposing pair functions in the reverse direction.

    • Conjugate Base: The species that remains after an acid donates its proton (H+H^+). It possesses one fewer hydrogen atom and its charge becomes more negative by 11 unit (effective loss of +1+1 charge).

    • Conjugate Acid: The species that forms when a base accepts a proton (H+H^+). It possesses one additional hydrogen atom and its charge becomes more positive by 11 unit (addition of +1+1 charge).

    • Conservation of Charge: Total net electrical charge must be strictly balanced on both sides of any valid chemical equation.

  • General Conjugate Pair Schema:   HA+B⇌A−+BH+HA + B \rightleftharpoons A^- + BH^+

    • Pair 1: Acid (HAHA) and Conjugate Base (A−A^-)

    • Pair 2: Base (BB) and Conjugate Acid (BH+BH^+)

Proton transfer between hydrofluoric acid and water showing conjugate acid-base pairs
  • Proton Transfer in Hydrofluoric Acid and Water:   HF(aq)+H2O(l)⇌F−(aq)+H3O+(aq)HF(aq) + H_2O(l) \rightleftharpoons F^-(aq) + H_3O^+(aq)

    • HFHF loses a proton to form its conjugate base, F−F^-.

    • H2OH_2O accepts a proton to form its conjugate acid, H3O+H_3O^+.

Proton transfer between ammonia and water demonstrating conjugate pairs
  • Proton Transfer in Ammonia and Water:   NH3(g)+H2O(l)⇌NH4+(aq)+OH−(aq)NH_3(g) + H_2O(l) \rightleftharpoons NH_4^+(aq) + OH^-(aq)

    • NH3NH_3 accepts a proton to form its conjugate acid, NH4+NH_4^+.

    • H2OH_2O donates a proton to form its conjugate base, OH−OH^-.

  • Amphoteric Compounds:

    • An amphoteric compound is a chemical substance containing both a hydrogen atom and at least one available nonbonding electron pair, allowing it to behave either as an acid or as a base depending on the reaction environment.

    • Water (H2OH_2O) as an Amphoteric Species:

    • Acting as a base (gains H+H^+): Forms the hydronium ion (H3O+H_3O^+), its conjugate acid.

    • Acting as an acid (loses H+H^+): Forms the hydroxide ion (OH−OH^-), its conjugate base.

  • Systematic Practice Identifying Conjugate Pairs:

    • Determining Conjugate Bases (subtract H+H^+):

    • HBr→Br−+H+HBr \rightarrow Br^- + H^+ (conjugate base is Br−Br^-)

    • H2S→HS−+H+H_2S \rightarrow HS^- + H^+ (conjugate base is HS−HS^-)

    • H2CO3→HCO3−+H+H_2CO_3 \rightarrow HCO_3^- + H^+ (conjugate base is HCO3−HCO_3^-)

    • HCO3−→CO32−+H+HCO_3^- \rightarrow CO_3^{2-} + H^+ (conjugate base is CO32−CO_3^{2-})

    • HSO4−→SO42−+H+HSO_4^- \rightarrow SO_4^{2-} + H^+ (conjugate base is SO42−SO_4^{2-})

    • HPO42−→PO43−+H+HPO_4^{2-} \rightarrow PO_4^{3-} + H^+ (conjugate base is PO43−PO_4^{3-})

    • H2O→OH−+H+H_2O \rightarrow OH^- + H^+ (conjugate base is OH−OH^-)

    • Determining Conjugate Acids (add H+H^+):

    • NO2−+H+→HNO2NO_2^- + H^+ \rightarrow HNO_2 (conjugate acid is HNO2HNO_2)

    • NH3+H+→NH4+NH_3 + H^+ \rightarrow NH_4^+ (conjugate acid is NH4+NH_4^+)

    • OH−+H+→H2OOH^- + H^+ \rightarrow H_2O (conjugate acid is H2OH_2O)

    • HCO3−+H+→H2CO3HCO_3^- + H^+ \rightarrow H_2CO_3 (conjugate acid is H2CO3H_2CO_3)

    • H2O+H+→H3O+H_2O + H^+ \rightarrow H_3O^+ (conjugate acid is H3O+H_3O^+)

    • Reactions and Explicit Pair Identifications:

    • Reaction: H2O(l)+HI(g)⇌I−(aq)+H3O+(aq)H_2O(l) + HI(g) \rightleftharpoons I^-(aq) + H_3O^+(aq)

      • Acid: HIHI; Conjugate base: I−I^-

      • Base: H2OH_2O; Conjugate acid: H3O+H_3O^+

    • Reaction: CH3COOH(l)+NH3(g)⇌CH3COO−(aq)+NH4+(aq)CH_3COOH(l) + NH_3(g) \rightleftharpoons CH_3COO^-(aq) + NH_4^+(aq)

      • Acid: CH3COOHCH_3COOH; Conjugate base: CH3COO−CH_3COO^-

      • Base: NH3NH_3; Conjugate acid: NH4+NH_4^+

    • Reaction: Br−(aq)+HNO3(aq)⇌HBr(aq)+NO3−(aq)Br^-(aq) + HNO_3(aq) \rightleftharpoons HBr(aq) + NO_3^-(aq)

      • Acid: HNO3HNO_3; Conjugate base: NO3−NO_3^-

      • Base: Br−Br^-; Conjugate acid: HBrHBr

    • Reaction: HI(g)+NH3(g)⇌NH4+(aq)+I−(aq)HI(g) + NH_3(g) \rightleftharpoons NH_4^+(aq) + I^-(aq)

      • Acid: HIHI; Conjugate base: I−I^-

      • Base: NH3NH_3; Conjugate acid: NH4+NH_4^+

    • Reaction: HPO42−(aq)+OH−(aq)⇌PO43−(aq)+H2O(l)HPO_4^{2-}(aq) + OH^-(aq) \rightleftharpoons PO_4^{3-}(aq) + H_2O(l)

      • Acid: HPO42−HPO_4^{2-}; Conjugate base: PO43−PO_4^{3-}

      • Base: OH−OH^-; Conjugate acid: H2OH_2O

Relative Strength of Acids and Bases

  • Dissociation and Equilibrium:

    • Dissociation: The proton-transfer reaction that takes place when a covalent acid dissolves in water to generate hydronium ions (H3O+H_3O^+).

    • Strong Acid: Dissolves in water with 100%100\% complete dissociation into ions. Equilibrium lies entirely to the right, represented by a single forward arrow (→\rightarrow):     HCl(g)+H2O(l)→H3O+(aq)+Cl−(aq)HCl(g) + H_2O(l) \rightarrow H_3O^+(aq) + Cl^-(aq)

    • The five common strong inorganic acids are hydroiodic acid (HIHI), hydrobromic acid (HBrHBr), hydrochloric acid (HClHCl), sulfuric acid (H2SO4H_2SO_4), and nitric acid (HNO3HNO_3).

    • Weak Acid: Dissolves in water with only a small fraction of its molecules dissociating into ions (<5%< 5\%). Equilibrium lies heavily to the left, favoring intact reactant molecules, represented by unequal equilibrium arrows (⇌\rightleftharpoons):     CH3COOH(l)+H2O(l)⇌H3O+(aq)+CH3COO−(aq)CH_3COOH(l) + H_2O(l) \rightleftharpoons H_3O^+(aq) + CH_3COO^-(aq)

    • Common weak acids include phosphoric acid (H3PO4H_3PO_4), hydrofluoric acid (HFHF), carbonic acid (H2CO3H_2CO_3), acetic acid (CH3COOHCH_3COOH), and hydrocyanic acid (HCNHCN).

Molecular-level comparison of complete dissociation in hydrochloric acid versus incomplete dissociation in acetic acid
  • Base Strength and Dissociation:

    • Strong Base: Dissociates 100%100\% into ions in aqueous solution. Common examples include sodium hydroxide (NaOHNaOH) and potassium hydroxide (KOHKOH):     NaOH(s)+H2O(l)→Na+(aq)+OH−(aq)NaOH(s) + H_2O(l) \rightarrow Na^+(aq) + OH^-(aq)

    • Weak Base: Dissolves in water with only a small fraction ionizing. Most of the compound remains as undissociated neutral molecules at equilibrium:     NH3(g)+H2O(l)⇌NH4+(aq)+OH−(aq)NH_3(g) + H_2O(l) \rightleftharpoons NH_4^+(aq) + OH^-(aq)

Microscopic view of complete ionization in sodium hydroxide compared to partial ionization in ammonia
  • Inverse Relationship Between Conjugate Pairs:

    • The stronger the acid, the weaker its conjugate base. Because a strong acid donates a proton with exceptional ease, its conjugate base has virtually no affinity to re-accept a proton.

    • The stronger the base, the weaker its conjugate acid. Because a strong base binds protons exceptionally tightly, its conjugate acid will not readily donate a proton.

Relative strengths of acids and their conjugate bases
  • Relative Strength Series (Table 8.1):

    • Strong Acids (Acid Strength Decreases Downward; Conjugate Base Strength Increases Downward):

    • Hydroiodic acid (HIHI) generates iodide ion (I−I^-).

    • Hydrobromic acid (HBrHBr) generates bromide ion (Br−Br^-).

    • Hydrochloric acid (HClHCl) generates chloride ion (Cl−Cl^-).

    • Sulfuric acid (H2SO4H_2SO_4) generates hydrogen sulfate ion (HSO4−HSO_4^-).

    • Nitric acid (HNO3HNO_3) generates nitrate ion (NO3−NO_3^-).

    • Hydronium ion (H3O+H_3O^+) generates water (H2OH_2O).

    • Weak Acids (Acid Strength Decreases Downward; Conjugate Base Strength Increases Downward):

    • Phosphoric acid (H3PO4H_3PO_4) generates dihydrogen phosphate ion (H2PO4−H_2PO_4^-).

    • Hydrofluoric acid (HFHF) generates fluoride ion (F−F^-).

    • Acetic acid (CH3COOHCH_3COOH) generates acetate ion (CH3COO−CH_3COO^-).

    • Carbonic acid (H2CO3H_2CO_3) generates bicarbonate ion (HCO3−HCO_3^-).

    • Ammonium ion (NH4+NH_4^+) generates ammonia (NH3NH_3).

    • Hydrocyanic acid (HCNHCN) generates cyanide ion (CN−CN^-).

    • Water (H2OH_2O) generates hydroxide ion (OH−OH^-).

The pH Scale and Environmental Acid Chemistry

  • Principles of the pH Scale:

    • The pH of a solution quantifies its acidity by measuring the molar concentration of hydronium ions ([H3O+][H_3O^+]).

    • Mathematical Relationship: The lower the pH value, the higher the concentration of H3O+H_3O^+ in solution.

    • Scale Range and Classifications:

    • Standard values range from 00 to 1414.

    • Acidic Solutions: pH<7.0\text{pH} < 7.0 ([H3O+]>[OH−][H_3O^+] > [OH^-]). 1-7

    • Neutral Solutions: pH=7.0\text{pH} = 7.0 ([H3O+]=[OH−][H_3O^+] = [OH^-]). 7

    • Basic (Alkaline) Solutions: pH>7.0\text{pH} > 7.0 ([H3O+]<[OH−][H_3O^+] < [OH^-]). 7-14

Logarithmic pH scale displaying common household and biological fluids from zero to fourteen
  • Specific pH Values of Everyday Substances:

    • 1.0 M HCl1.0\,\text{M } HCl: 0.00.0

    • Gastric juice: 1.61.6

    • Lemon juice: 2.22.2

    • Vinegar: 2.82.8

    • Carbonated beverage: 3.03.0

    • Orange: 3.53.5

    • Apple juice: 3.83.8

    • Tomato: 4.24.2

    • Coffee: 5.05.0

    • Bread: 5.55.5

    • Potato: 5.85.8

    • Urine: 6.06.0

    • Milk: 6.46.4

    • Pure water: 7.07.0

    • Drinking water: 7.27.2

    • Blood: 7.47.4

    • Bile: 8.08.0

    • Detergents: 8.0−9.08.0 - 9.0

    • Seawater: 8.58.5

    • Milk of magnesia: 10.510.5

    • Ammonia cleaner: 11.011.0

    • Bleach: 12.012.0

    • 1.0 M NaOH1.0\,\text{M } NaOH (lye): 14.014.0

  • Natural Atmospheric Acidity:

    • Unpolluted natural rain is naturally slightly acidic, maintaining a pH of approximately 5.65.6.

    • This natural acidity is due to atmospheric carbon dioxide dissolving into water droplets to form carbonic acid, which partially dissociates:     CO2(g)+H2O(l)⇌H2CO3(aq)CO_2(g) + H_2O(l) \rightleftharpoons H_2CO_3(aq)     H2CO3(aq)+H2O(l)⇌H3O+(aq)+HCO3−(aq)H_2CO_3(aq) + H_2O(l) \rightleftharpoons H_3O^+(aq) + HCO_3^-(aq)

  • Acid Rain Chemistry and Environmental Destruction:

    • Combustion of sulfur-containing fossil fuels and coal emits sulfur dioxide (SO2SO_2) into the atmosphere.

    • Atmospheric oxidation converts sulfur dioxide into sulfur trioxide:     2 SO2(g)+O2(g)→2 SO3(g)2\,SO_2(g) + O_2(g) \rightarrow 2\,SO_3(g)

    • Sulfur trioxide reacts rapidly with atmospheric moisture to form sulfuric acid (H2SO4H_2SO_4), a strong acid:     SO3(g)+H2O(l)→H2SO4(aq)SO_3(g) + H_2O(l) \rightarrow H_2SO_4(aq)

    • Ecological Consequences:

    • Precipitation deposits sulfuric acid into surface waters and soil.

    • When the pH of lakes and aquatic systems drops below 4.5−5.04.5 - 5.0, most fish and aquatic plant life perish.

    • Acid precipitation dissolves the protective waxy cuticles coating tree leaves, directly disrupting photosynthetic electron transport and stunting forest canopy growth, as observed across damaged forest tracts in Eastern Europe.

Forest destruction caused by acid precipitation

Biological and Human Physiological pH Systems

  • Significance of Strict pH Regulation:

    • Agricultural soil requires precise pH maintenance to support crop nutrient uptake.

    • Swimming pools require tightly maintained pH ranges to prevent algal blooms and equipment corrosion.

    • Human stomach parietal cells excrete hydrochloric acid (HClHCl) until the gastric lumen reaches an acidic pH of approximately 1.6−2.01.6 - 2.0, optimizing pepsin enzymatic digestion and destroying ingested pathogens.

    • Human arterial blood is maintained within a strict homeostatic window of 7.35−7.457.35 - 7.45 (nominal target of 7.407.40). Any deviation outside these physiological limits leads to cellular dysfunction, protein denaturation, or death.

Anatomical map of the human body depicting specific pH values of organ fluids
  • Specific Body Fluid pH Reference Ranges:

    • Saliva: 5.8−7.15.8 - 7.1

    • Stomach contents: 1.6−1.81.6 - 1.8

    • Blood (arterial): 7.35−7.457.35 - 7.45 (nominal 7.47.4)

    • Pancreatic secretions: 7.5−8.87.5 - 8.8

    • Small intestine: 8.58.5

    • Large intestine: 5.0−7.05.0 - 7.0

    • Urine: 4.6−8.04.6 - 8.0

Major Chemical Reactions of Acids

  • Reactions of Acids with Hydroxide Bases (Neutralization):

    • A neutralization reaction occurs when a Brønsted–Lowry acid reacts with a metal hydroxide base to produce a neutral water molecule and an ionic salt:     HA(aq)+MOH(aq)→H2O(l)+MA(aq)HA(aq) + MOH(aq) \rightarrow H_2O(l) + MA(aq)

    • The acidic proton (H+H^+) combines with the basic hydroxide (OH−OH^-) to yield covalent liquid water (H2OH_2O).

    • The acid's conjugate anion (A−A^-) pairs electrostatically with the metal cation (M+M^+) to yield the dissolved salt (MAMA).

  • Step-by-Step Procedure for Balancing Neutralization Equations:

    • Step 1: Identify the acid and the base reactants; write liquid H2OH_2O as a definitive product:     HCl(aq)+Mg(OH)2(aq)→H2O(l)+saltHCl(aq) + Mg(OH)_2(aq) \rightarrow H_2O(l) + \text{salt}

    • Step 2: Determine the ionic formula of the salt by pairing the cation from the base with the anion from the acid. For Mg(OH)2Mg(OH)_2 and HClHCl, the cation is Mg2+Mg^{2+} and the anion is Cl−Cl^-, requiring a 1:21:2 ratio to balance charges into magnesium chloride (MgCl2MgCl_2).

    • Step 3: Balance the stoichiometric coefficients of all atoms across the reaction:     2 HCl(aq)+Mg(OH)2(aq)→2 H2O(l)+MgCl2(aq)2\,HCl(aq) + Mg(OH)_2(aq) \rightarrow 2\,H_2O(l) + MgCl_2(aq)

  • Additional Balanced Neutralization Reactions:

    • Reaction of sulfuric acid with potassium hydroxide:     H2SO4(aq)+2 KOH(aq)→K2SO4(aq)+2 H2O(l)H_2SO_4(aq) + 2\,KOH(aq) \rightarrow K_2SO_4(aq) + 2\,H_2O(l)

    • Reaction of nitric acid with sodium hydroxide:     HNO3(aq)+NaOH(aq)→NaNO3(aq)+H2O(l)HNO_3(aq) + NaOH(aq) \rightarrow NaNO_3(aq) + H_2O(l)

    • Reaction of nitrous acid with lithium hydroxide:     HNO2(aq)+LiOH(aq)→LiNO2(aq)+H2O(l)HNO_2(aq) + LiOH(aq) \rightarrow LiNO_2(aq) + H_2O(l)

    • Reaction of hydrobromic acid with sodium hydroxide:     HBr(aq)+NaOH(aq)→NaBr(aq)+H2O(l)HBr(aq) + NaOH(aq) \rightarrow NaBr(aq) + H_2O(l)

  • Reactions of Acids with Bicarbonate Bases (HCO3−HCO_3^-):

    • A bicarbonate base reacts with one equivalent of an acidic proton (H+H^+) to form carbonic acid (H2CO3H_2CO_3):     H+(aq)+HCO3−(aq)→H2CO3(aq)H^+(aq) + HCO_3^-(aq) \rightarrow H_2CO_3(aq)

    • Carbonic acid is thermodynamically unstable in solution and spontaneously decomposes into liquid water and gaseous carbon dioxide:     H2CO3(aq)→H2O(l)+CO2(g)H_2CO_3(aq) \rightarrow H_2O(l) + CO_2(g)

    • Net reaction with hydrochloric acid and sodium bicarbonate:     HCl(aq)+NaHCO3(aq)→NaCl(aq)+H2O(l)+CO2(g)HCl(aq) + NaHCO_3(aq) \rightarrow NaCl(aq) + H_2O(l) + CO_2(g)

    • Net reaction with sulfuric acid and sodium bicarbonate:     H2SO4(aq)+2 NaHCO3(aq)→Na2SO4(aq)+2 H2O(l)+2 CO2(g)H_2SO_4(aq) + 2\,NaHCO_3(aq) \rightarrow Na_2SO_4(aq) + 2\,H_2O(l) + 2\,CO_2(g)

    • Net reaction with hydroiodic acid and sodium bicarbonate:     HI(aq)+NaHCO3(aq)→NaI(aq)+H2O(l)+CO2(g)HI(aq) + NaHCO_3(aq) \rightarrow NaI(aq) + H_2O(l) + CO_2(g)

  • Reactions of Acids with Carbonate Bases (CO32−CO_3^{2-}):

    • A carbonate base reacts with two equivalents of acidic protons (H+H^+) to form intermediate carbonic acid (H2CO3H_2CO_3), which decomposes immediately into water and carbon dioxide:     2 H+(aq)+CO32−(aq)→[H2CO3(aq)]→H2O(l)+CO2(g)2\,H^+(aq) + CO_3^{2-}(aq) \rightarrow [H_2CO_3(aq)] \rightarrow H_2O(l) + CO_2(g)

    • Net reaction of calcium carbonate with hydrochloric acid:     2 HCl(aq)+CaCO3(aq)→CaCl2(aq)+H2O(l)+CO2(g)2\,HCl(aq) + CaCO_3(aq) \rightarrow CaCl_2(aq) + H_2O(l) + CO_2(g)

    • Net reaction of magnesium carbonate with nitric acid:     2 HNO3(aq)+MgCO3(aq)→Mg(NO3)2(aq)+H2O(l)+CO2(g)2\,HNO_3(aq) + MgCO_3(aq) \rightarrow Mg(NO_3)_2(aq) + H_2O(l) + CO_2(g)

Quantitative Acid–Base Titrations

  • Analytical Principles and Colorimetric Indicators:

    • Titration: An analytical laboratory procedure used to determine the unknown concentration (molarity) of an acid or base solution by reacting it with a measured volume of a titrant of known concentration (standard solution).

    • Indicators: Weakly acidic or basic organic dyes that alter color at specific pH thresholds to visually signal neutralization. Examples include litmus paper (turns red in acid, blue in base), red cabbage extract, and phenolphthalein (colorless in acid, bright pink in basic media).

    • Equivalence Point (End Point): The state in a titration where the exact stoichiometric quantity of base has been added to neutralize all acid present (moles of H+=moles of OH−\text{moles of } H^+ = \text{moles of } OH^-).

Litmus paper chemical indicator test demonstrating a color shift to blue in basic solutionLaboratory buret dispensing standard titrant into an Erlenmeyer flask
  • Three-Step Titration Calculation Methodology:

    • Step 1: Convert the measured volume of standard titrant delivered to liters, then multiply by its known molarity (mol/L\text{mol/L}) to obtain the absolute number of moles of titrant consumed.

    • Step 2: Apply the stoichiometric mole-to-mole conversion factor from the balanced neutralization reaction to calculate the moles of the analyte solution neutralized.

    • Step 3: Divide the calculated moles of analyte by the sample volume of analyte (converted into liters) to yield the unknown molar concentration (M=mol/LM = \text{mol/L}).

  • Worked Example 1: Monoprotic Titration (HClHCl with NaOHNaOH)

    • Problem: Calculate the molarity of an HClHCl solution if 22.5 mL22.5\,\text{mL} of 0.100 M NaOH0.100\,\text{M } NaOH are required to titrate a 25.0 mL25.0\,\text{mL} sample of the acid.

    • Reaction: HCl(aq)+NaOH(aq)→H2O(l)+NaCl(aq)HCl(aq) + NaOH(aq) \rightarrow H_2O(l) + NaCl(aq)

    • Step 1 (Moles of base):     22.5 mL NaOH×1 L1000 mL×0.100 mol NaOH1 L=0.00225 mol NaOH22.5\,\text{mL } NaOH \times \frac{1\,\text{L}}{1000\,\text{mL}} \times \frac{0.100\,\text{mol } NaOH}{1\,\text{L}} = 0.00225\,\text{mol } NaOH

    • Step 2 (Moles of acid via stoichiometry):     0.00225 mol NaOH×1 mol HCl1 mol NaOH=0.00225 mol HCl0.00225\,\text{mol } NaOH \times \frac{1\,\text{mol } HCl}{1\,\text{mol } NaOH} = 0.00225\,\text{mol } HCl

    • Step 3 (Molarity of acid):     Molarity=0.00225 mol HCl25.0 mL×1000 mL1 L=0.0900 M HCl\text{Molarity} = \frac{0.00225\,\text{mol } HCl}{25.0\,\text{mL}} \times \frac{1000\,\text{mL}}{1\,\text{L}} = 0.0900\,\text{M } HCl

  • Worked Example 2: Diprotic Titration (H2SO4H_2SO_4 with NaOHNaOH)

    • Problem: What is the molarity of an H2SO4H_2SO_4 solution if 18.5 mL18.5\,\text{mL} of 0.18 M NaOH0.18\,\text{M } NaOH are needed to neutralize a 25.0 mL25.0\,\text{mL} sample?

    • Reaction: H2SO4(aq)+2 NaOH(aq)→Na2SO4(aq)+2 H2O(l)H_2SO_4(aq) + 2\,NaOH(aq) \rightarrow Na_2SO_4(aq) + 2\,H_2O(l)

    • Step 1 (Moles of base):     0.0185 L×0.18 mol/L NaOH=0.00333 mol NaOH0.0185\,\text{L} \times 0.18\,\text{mol/L } NaOH = 0.00333\,\text{mol } NaOH

    • Step 2 (Moles of acid):     0.00333 mol NaOH×1 mol H2SO42 mol NaOH=0.001665 mol H2SO40.00333\,\text{mol } NaOH \times \frac{1\,\text{mol } H_2SO_4}{2\,\text{mol } NaOH} = 0.001665\,\text{mol } H_2SO_4

    • Step 3 (Molarity of acid):     Molarity=0.001665 mol H2SO40.0250 L=0.0666 M≈0.067 M H2SO4\text{Molarity} = \frac{0.001665\,\text{mol } H_2SO_4}{0.0250\,\text{L}} = 0.0666\,\text{M} \approx 0.067\,\text{M } H_2SO_4

  • Worked Example 3: Titration of HClHCl with KOHKOH

    • Problem: What is the molarity of an HClHCl solution if 35.6 mL35.6\,\text{mL} of 0.125 M KOH0.125\,\text{M } KOH are needed to titrate a 25.0 mL25.0\,\text{mL} sample of the acid?

    • Reaction: HCl(aq)+KOH(aq)→KCl(aq)+H2O(l)HCl(aq) + KOH(aq) \rightarrow KCl(aq) + H_2O(l)

    • Step 1 (Moles of base):     0.0356 L×0.125 mol/L KOH=0.00445 mol KOH0.0356\,\text{L} \times 0.125\,\text{mol/L } KOH = 0.00445\,\text{mol } KOH

    • Step 2 (Moles of acid):     0.00445 mol KOH×1 mol HCl1 mol KOH=0.00445 mol HCl0.00445\,\text{mol } KOH \times \frac{1\,\text{mol } HCl}{1\,\text{mol } KOH} = 0.00445\,\text{mol } HCl

    • Step 3 (Molarity of acid):     Molarity=0.00445 mol HCl0.0250 L=0.178 M HCl\text{Molarity} = \frac{0.00445\,\text{mol } HCl}{0.0250\,\text{L}} = 0.178\,\text{M } HCl

  • Worked Example 4: Titrant Volume Calculation

    • Problem: How many milliliters of 2.5 M NaOH2.5\,\text{M } NaOH solution are required to neutralize 9.0 mL9.0\,\text{mL} of 3.5 M H2SO43.5\,\text{M } H_2SO_4 solution?

    • Reaction: H2SO4(aq)+2 NaOH(aq)→Na2SO4(aq)+2 H2O(l)H_2SO_4(aq) + 2\,NaOH(aq) \rightarrow Na_2SO_4(aq) + 2\,H_2O(l)

    • Step 1 (Moles of acid):     0.0090 L×3.5 mol/L H2SO4=0.0315 mol H2SO40.0090\,\text{L} \times 3.5\,\text{mol/L } H_2SO_4 = 0.0315\,\text{mol } H_2SO_4

    • Step 2 (Moles of base required):     0.0315 mol H2SO4×2 mol NaOH1 mol H2SO4=0.0630 mol NaOH0.0315\,\text{mol } H_2SO_4 \times \frac{2\,\text{mol } NaOH}{1\,\text{mol } H_2SO_4} = 0.0630\,\text{mol } NaOH

    • Step 3 (Volume of base in mL):     Volume=0.0630 mol NaOH2.5 mol/L=0.0252 L=25.2 mL NaOH\text{Volume} = \frac{0.0630\,\text{mol } NaOH}{2.5\,\text{mol/L}} = 0.0252\,\text{L} = 25.2\,\text{mL } NaOH

Buffer Solutions and Physiological Acid–Base Balance

  • Buffer Composition and Function:

    • A buffer is an aqueous solution that resists significant changes in pH upon the addition of small quantities of either strong acid or strong base.

    • Composition Requirements: A buffer consists of roughly equal, appreciable concentrations of:

    1. A weak acid (HAHA

    2. The salt containing its conjugate base (A−A^-

    • Contrast with Unbuffered Water:

    • Adding 0.020 mol0.020\,\text{mol} of strong acid (HClHCl) to pure water at pH 7.07.0 causes the pH to plummet to 1.71.7.

    • Adding 0.020 mol0.020\,\text{mol} of strong base (NaOHNaOH) to pure water causes the pH to surge to 12.312.3.

    • In contrast, adding the same 0.020 mol0.020\,\text{mol} of HClHCl to an acetic acid/sodium acetate buffer at pH 4.744.74 shifts the pH down only slightly to 4.704.70.

    • Adding 0.020 mol0.020\,\text{mol} of NaOHNaOH shifts the buffer pH up marginally to 4.774.77.

Comparative response of pure unbuffered water versus a buffered system upon addition of strong acid and strong base
  • Equilibrium Mechanism of Buffer Action (Le Chatelier's Principle):

    • Resistance to Added Acid (H3O+H_3O^+):     CH3COOH(aq)+H2O(l)⇌H3O+(aq)+CH3COO−(aq)CH_3COOH(aq) + H_2O(l) \rightleftharpoons H_3O^+(aq) + CH_3COO^-(aq)

    • Introducing extra hydronium ions (H3O+H_3O^+) adds product to the equilibrium mixture.

    • According to Le Chatelier's principle, the equilibrium shifts to the left, consuming the excess hydronium through reaction with the conjugate base (CH3COO−CH_3COO^-), preserving the overall pH.

    • Resistance to Added Base (OH−OH^-):     CH3COOH(aq)+OH−(aq)⇌H2O(l)+CH3COO−(aq)CH_3COOH(aq) + OH^-(aq) \rightleftharpoons H_2O(l) + CH_3COO^-(aq)

    • Introducing hydroxide ions (OH−OH^-) neutralizes protons, reacting directly with the undissociated weak acid (CH3COOHCH_3COOH) to generate water and acetate.

    • The stress drives the reaction to the right, neutralizing the added base and keeping the pH steady.

  • Evaluating Valid Buffer Mixtures:

    • System 1: HBrHBr and NaBrNaBr: Not a buffer. HBrHBr is a strong acid that dissociates completely; its conjugate base (Br−Br^-) is too weak to accept protons.

    • System 2: HFHF and KFKF: A valid buffer. HFHF is a weak acid and F−F^- (from potassium fluoride) is its conjugate base.

    • System 3: CH3COOHCH_3COOH alone: Not a buffer. It lacks the conjugate base salt needed to neutralize added strong acid.

  • The Carbonic Acid–Bicarbonate Blood Buffer System:

    • Normal human arterial blood pH is tightly regulated between 7.357.35 and 7.457.45.

    • The principal physiological buffer in human blood is the carbonic acid/bicarbonate (H2CO3/HCO3−H_2CO_3 / HCO_3^-) conjugate pair, maintained in continuous equilibrium with dissolved carbon dioxide produced during cellular metabolism:     CO2(g)+H2O(l)⇌H2CO3(aq)⇌+H2OH3O+(aq)+HCO3−(aq)CO_2(g) + H_2O(l) \rightleftharpoons H_2CO_3(aq) \overset{+H_2O}{\rightleftharpoons} H_3O^+(aq) + HCO_3^-(aq)

  • Pathophysiological Acid–Base Derangements:

    • Respiratory Acidosis:

    • Occurs when pulmonary gas exchange is impaired (e.g., emphysema, pneumonia, severe asthma, hypoventilation, respiratory center depression, or respiratory failure), preventing adequate exhalation of CO2CO_2.

    • A depressed respiratory rate elevates systemic [CO2][CO_2], driving the hydration equilibrium to the right.

    • This shift increases hydronium ion concentration ([H3O+][H_3O^+]), dropping arterial blood pH below 7.357.35.

    • Respiratory Alkalosis:

    • Occurs during pulmonary hyperventilation (e.g., panic attacks, extreme anxiety, high altitude hypoxia, or excessive mechanical ventilation).

    • Rapid breathing expels CO2CO_2 faster than tissues produce it, significantly decreasing systemic [CO2][CO_2].

    • The equilibrium shifts to the left to replenish CO2CO_2, depleting [H3O+][H_3O^+] and raising arterial blood pH above 7.457.45.

    • Metabolic Acidosis:

    • Caused by excessive accumulation of non-carbonic organic acids or profound bicarbonate loss in the body.

    • Frequently observed during severe systemic infections (septic shock producing lactic acid accumulation), poorly controlled diabetes mellitus (diabetic ketoacidosis producing ketoacids), or severe renal failure.

    • Characterized by an arterial blood pH falling below 7.357.35 independent of primary lung failure.

    • Metabolic Alkalosis:

    • Arises from excessive loss of non-carbonic systemic acids or disproportionate accumulation of bicarbonate.

    • Common etiology includes severe recurrent vomiting or prolonged nasogastric suction, which expels massive quantities of gastric hydrochloric acid (HClHCl).

    • The net loss of gastric protons drives an increase in plasma bicarbonate and shifts arterial blood pH above 7.457.45.