Lecture_2.pptx
WATER APPLICATION TECHNIQUES
INTRODUCTION TO IRRIGATION
Major Irrigation Methods
Surface Irrigation: The most common method globally.
Sub-surface Irrigation: Water applied below soil surface.
Pressurized Irrigation: Water delivered under pressure, includes:
Sprinkler: Simulates natural rainfall.
Drip/Trickle: Delivery of water at a slow rate.
Border Irrigation: Water applied between raised beds or borders.
Basin Irrigation: Water pooled in flattened areas.
Wild Flooding Irrigation: Uncontrolled flooding in fields.
Furrow Irrigation: Water flows through furrowed rows.
IRRIGATION WATER APPLICATION METHODS
Methods Descriptions
A. Surface Irrigation:
Just flooding water.
Approximately 90% of the irrigated areas in the world are by this method.
B. Sprinkler Irrigation:Water is applied under pressure.
About 5% of irrigated areas utilize this method.
C. Drip or Trickle Irrigation:Water is applied slowly to match crop consumption.
D. Sub-Surface Irrigation:Water floods underground and moves via capillary action to crop roots.
INTRODUCTION TO SURFACE IRRIGATION SYSTEMS
Surface Irrigation Methods
Furrow Irrigation
Basin Irrigation
Border Irrigation
Wild Flooding Irrigation
Pressurized Irrigation
Sprinkler Irrigation
Drip Irrigation
SELECTION OF IRRIGATION METHOD
Decision Factors
Choice of irrigation method must precede installation.
Know advantages and disadvantages of each water application method.
Factors Affecting Selection
Soil Type: Impacts water retention and drainage.
Field Shape/Geometry and Topography: Influences water application and distribution.
Climate:
Evaporation rates.
Precipitation (ppt) amounts.
Water Availability:
Quantity and price contribute to method choice.
Crop Characteristics:
Type of crop, depth, and frequency of irrigation needed.
Economic Factors:
Cost-benefit ratio.
Initial investment considerations.
Fertigation Capability:
Requirement for fertilization through irrigation.
Machinery and Equipment Requirements:
Infrastructure necessary for the irrigation system.
SURFACE IRRIGATION
Definition
Surface irrigation involves distributing water over fields via overland flow.
Advantages
Commonly known method; local farmers understand operation and maintenance.
Approximately 90% of the world's irrigated areas utilize surface irrigation.
Surface Irrigation Types
Furrow Irrigation
Basin Irrigation
Border Irrigation
Wild Flooding Irrigation
WILD FLOODING
Description
This method involves excavated ditches that run either along the contour or up and down slopes.
Includes systems like check-basins for individual tree irrigation in orchards.
BASIN IRRIGATION
Common Characteristics
Most prevalent form of surface irrigation, especially in small field layouts.
A leveled field enclosed by dikes, allowing for unidirectional water flow into the basin.
Crop Suitability
Suitable for various crops such as rice, cotton, groundnuts, etc.
Additional Uses
Effective in salt-affected areas and for closely spaced crops that are sensitive to flooding.
Best on flat lands with less than a 0.1% slope.
BORDER IRRIGATION
Grouping by Management Strategy
Fixed Flow: Constant inlet flow rate throughout.
Cutback: Begins with high non-erosive inlet flow rate.
Tail Water Reuse: Collects excess surface runoff for reuse either in the same or another field.
FURROW IRRIGATION
Overview
One of the oldest controlled irrigation methods.
Water is applied in furrows through minor discharges enhancing infiltration.
Crop Adaptability
Suited for row crops like corn, banana, tobacco, and cabbage; effective for grains as well.
Furrow irrigation can be adapted to various slopes, aside from steep ones prone to erosion.
Application Techniques
Siphons to transfer water from the head ditch to furrows.
Direct Gravity Flow by cutting the ridge separating the head ditch from furrows.
Gated Pipes: Larger pipes (up to 450 mm) to control discharge into furrows.
PRESSURIZED IRRIGATION
Description
Involves pumping water into pipes under pressure for precise delivery to plants.
Innovations
Developed throughout the 1900s, with drip irrigation stemming from technological advances in the 1960s in Israel.
Advantages
Significant water savings compared to surface flow irrigation.
High application efficiency (75% to 95%), more effective in arid regions.
Water Quality
Critical to maintaining pressurized systems; must filter water to prevent emitter blockage.
Regular maintenance required for pumps and fittings.
TYPES OF PRESSURIZED IRRIGATION SYSTEMS
SPRINKLER IRRIGATION
Applies water as a spray, mimicking natural rainfall.
Efficient for areas with limited water resources.
Only about 5% of irrigated areas utilize this method.
Components of a Sprinkler System
Energy sources.
Water sources.