Adaptive Mobility Devices (AMDs) Flashcards
Overview of Adaptive Mobility Devices (AMDs)
Definitions & Concept:
An Adapted Mobility Device (also referred to as an Assistive Mobility Device, Alternative Mobility Device, or AMD) is a modified spatial pre-cane tool designed to assist visually impaired individuals in detecting environmental obstacles and drop-offs.
AMDs provide early spatial awareness by acting as physical bumpers that protect the body while anticipating hazards before foot contact occurs.
Due to their protective anticipating function, AMDs are broadly categorized alongside push toys, pre-mobility devices, and long white canes under the overarching term Anticipators.
Target Population & Clinical Rationale:
AMDs are primarily designed for young pediatric populations who have not yet developed the fine motor control, grip strength, or motor planning required to maneuver a standard long cane.
AMDs cater to students presenting with complex physical or multiple impairments (e.g., motoric involvement) that make executing a traditional cane sweep or maintaining a diagonal cane technique difficult or impossible.
Pediatric Belt Canes & Early Exploration:
Pediatric Belt Cane: A specialized hands-free mobility device worn around a young child's waist like a frame skirt with small flexible shafts radiating outward, terminating in spherical or ball tips to prevent snagging on terrain.
Enables toddlers who are just learning to walk to explore environments freely in all directions (forward, lateral, or backward) without fear of unexpected collisions or drop-offs, instilling independent spatial exploration before formal handheld cane instruction.

Classification Taxonomy ("The Name Game"):
Kiddie Canes: Miniature versions of standard long white canes featuring a white upper shaft with a red lower tip section; some early belt variants attach to a soft harness or waist strap.
Alternative / Pre-Canes: Informal push toys adapted for mobility practice (e.g., toy shopping carts, toy lawnmowers, or corn-popper push toys with clear bubble domes containing popping balls that generate auditory movement feedback while serving as front bumpers).
Adaptive Devices: Structured frame units built from lightweight materials (typically PVC piping), modified walkers, or custom single-shaft roll-along attachments.

Criteria for Selecting Mobility Devices
Selection Criteria Framework (Laurel J. Hudson, Ph.D. & Paula R. Kosior, M.Ed., C.A.E.S. via Wonderbaby.org):
1. Structural Support Type:
Child-Supported Devices: Require continuous active gripping; if the child opens their hands or loses concentration, the device falls flat onto the ground.
Self-Supporting Devices: Engineered with a stable base configuration that allows the device to remain freestanding upright even if the child entirely releases their grip.
2. Grasp & Bimanual Control:
One-Handed Devices: Require single-arm push control, suitable for students who can maintain a stable one-handed grip.
Two-Handed Devices: Feature wide horizontal handles designed for bimanual gripping, ideal for bilateral upper-extremity support.
3. Device Formality:
Informal/Toy Devices: Commercial push toys utilized for preliminary movement experiences.
Formal Mobility Devices: Purpose-built pre-canes and custom structural AMDs.
Practical & Design Considerations:
Cost-Effectiveness: Evaluating commercial options against custom-built PVC units.
Anatomical Fit: Tailoring device length, handle height, and width to exact student physical measurements and forward arm extension.
Durability & Reusability: Utilizing modular PVC construction allows instructors to assemble devices cheaply and later deconstruct and reconfigure raw materials for other students when individual mobility needs change.
Modifications: Adding secondary handles, caster assemblies, or instructor training bars.
Specific AMD Models and Fabrication Specifications
1. The Roller
Clinical Purpose: Provides complete full-body coverage and frontal protection for students who are unable to perform a lateral cane sweep or maintain a static diagonal technique.
Structural Design: A closed rectangular frame pushed forward bimanually. The upper horizontal bar serves as the handle, while the lower horizontal bar rolls across terrain.
Source & Attribution: Original design by Gene Healy (TAPS, Page 277).
Sizing: Frame height and length are customized to the student's standing height and comfortable forward arm extension.
Materials & Assembly:
PVC pipe (length calculated based on student anthropometric measurements).
PVC pipe (cut into loose sleeve sections placed around the bottom pipe to function as free-spinning ground rollers).
PVC slip elbows (4 corner pieces).
PVC glue and PVC cleaner.
Red Scotchlite reflective tape applied along the lower structural vertical tubes to mirror traditional cane safety markings.
Commercial Alternative: Pre-manufactured versions produced by Ambutech utilize bottom corner caster wheels rather than sleeve rollers.



2. The T-Wheeler
Clinical Purpose: Delivers full-body protection for students unable to sweep a cane or hold a diagonal position, but who possess sufficient fine motor control for a single-handed grasp.
Structural Design: A single vertical center shaft with a handgrip at the top and a T-connector at the base connected to a wide horizontal ground bar fitted with wheels at both terminal ends.
Source & Attribution: Original design by Caroline Martinez and Lisa Calaci (TAPS, Page 283).
Sizing: Height from the top handgrip down to the intersecting T-bar is determined by the student's standing height and forward arm extension.
Materials & Assembly:
PVC pipe fittings and plastic sleeves.
castor wheels (or commercial Ambutech Push Broom Tip attachment).
sheet metal screws.
Top section of an old repurposed folding long cane (used as the central shaft).
Hula-Hoop Variant: A flexible alternative made by compressing the top curve of a hula hoop together with elastic/string to create a teardrop frame; the narrow bound top serves as a handle while the wide rounded bottom glides along the ground.



3. L-Bar Mounted on a Cane
Clinical Purpose: A temporary transition attachment fitted onto a standard rigid long cane. Assists students in stabilizing the cane using a secondary hand hold until they develop the motor control necessary to maintain an independent diagonal or constant contact technique.
Structural Design: An L-shaped extension arm mounted just below the main cane handle, projecting horizontally outward by to provide a secondary grip.
Source & Attribution: Original design by Gene Healy (TAPS, Page 285).
Materials & Assembly:
Hula hoop sections or PVC pipe ( horizontal section joined to a mounting section).
PVC slip elbow.
Shoe Goo II adhesive, PVC glue, and PVC cleaner.
Secure mounting tape (duct tape, electrical tape, or masking tape) to fasten the vertical leg to the primary cane shaft above a marshmallow or mushroom tip.

4. The Arc Definer
Clinical Purpose: Establishes physical lateral boundaries to provide tactile feedback during movement, training students to maintain proper cane arc width and build correct motor memory.
Structural Design: An inverted U-frame held by an Orientation & Mobility (O&M) instructor walking backward ahead of the student. The two vertical legs form physical gates that bound the left and right limits of the student's cane arc.
Source & Attribution: Original design by Gene Healy (TAPS, Page 286).
Dimensions: Overall frame height of () constructed using hula hoop tubing; top handle width of widening to an open base sweep width of .
Materials & Assembly:
PVC pipe ( handle tube).
PVC slip elbows (2 units).
Two () hula hoop curved side sections.
Internal locking assembly: Two corks and two sheet metal screws installed inside the elbow connections.
Optional PVC insulation foam material placed over the top handle bar for instructor comfort.
Shoe Goo II glue, PVC glue, and PVC cleaner.




5. Tandem Bar
Clinical Purpose: Connects an instructor's cane directly to a student's cane via terminal end clamps. Allows the instructor to physically model correct cane rhythm, technique, and sweeping arc while walking alongside the student without touching the student's body or hands.
Structural Design: A rigid connecting rod with quick-release mounting clips fixed at both ends.
Commercial Source: Ambutech.
Materials for Fabrication:
PVC pipe or wooden dowel rod.
Dual terminal Velcro attachment straps or mechanical clips.
Optional fasteners (screws and glue).


6. Instructor Side-Extension Bar Attachment
Clinical Purpose: Secondary handle modification fitted onto a standard rectangular PVC AMD frame. Allows an instructor walking alongside a student to guide the device or prevent it from falling when the child loses grip.
Structural Design: An horizontal PVC arm extending outward from the main vertical frame tube, turning upright via a elbow fitting and ending in a T-bar cross handle held by the instructor.
Materials: Curved hula hoop or PVC segments, vertical T-connector, and securing screws installed on front and back faces of the connector.
Curriculum References and Professional Resources
Curriculum & Core Literature:
TAPS (Texas Orientation & Mobility Curriculum for Students with Visual Impairments), 2nd Edition (2000), published by the Texas School for the Blind and Visually Impaired (TSBVI).
TAPS Authors: Rona Pogrund, Gene Healy, Kelley Jones, Nancy Levack, Sharon Martin-Curry, Carolina Martinez, Janet Marz, Burnsteen Roberson-Smith, and Anna Vrba.
TAPS Design & Layout: Brigitte MaGee.
Websites & Commercial Manufacturers:
American Foundation for the Blind (AFB): Web resource guides detailing mobility devices, pre-canes, and pediatric canes.
Ambutech (
Ambutech.com): Commercial manufacturer supplying folding canes, pediatric rollers, Push Broom Tips, and Tandem Bars.Wonderbaby.org: "Anticipators for Young Children with Visual Impairments: Push Toys, Pre-Canes and Long Canes" by Laurel J. Hudson, Ph.D., and Paula R. Kosior, M.Ed., C.A.E.S.
Professional Specialists & Contacts:
Jennifer Duncan, TSVI, COMS
Laurel Kramer, TSVI, COMS
Katie White Fodor, TSVI, COMS