Buffer Solutions and Aqueous Equilibria

Buffer Solutions
  • Definition:

    • A buffer is a chemical system that resists changes in pH.

    • Example: When 0.010 mol of HCl or NaOH is added to various solutions, only buffered solutions maintain a relatively stable pH compared to pure water.

Conditions for Buffers
  • Components Required:

    • A weak acid: To react with any added base.

    • A weak base: To react with any added acid.

    • Crucially, these components must not react with each other.

    • Buffers are typically prepared with nearly equal concentrations of a conjugate acid-base pair (e.g., CH₃COOH + CH₃COONa).

Buffer Action
  • Mechanism:

    • When OH⁻ is added:

    CH3COOH+OH−→CH3COO−+H2OCH₃COOH + OH⁻ → CH₃COO⁻ + H₂O

    • When H₃O⁺ is added:

    CH3COO−+H3O+→CH3COOH+H2OCH₃COO⁻ + H₃O⁺ → CH₃COOH + H₂O

Blood PH Regulation
  • Normal Range:

    • Blood is buffered at pH approximately 7.40 (±0.05).

    • Causes of deviations:

    • pH too low: Acidosis

    • pH too high: Alkalosis

    • Major Buffer in Blood: Carbonic acid and bicarbonate system:

    CO2(aq)+H2O(ℓ)⇌H2CO3(aq)<br>H2CO3(aq)+H2O(ℓ)⇌H3O+(aq)+HCO3−(aq)CO₂(aq) + H₂O(ℓ) ⇌ H₂CO₃(aq) <br>H₂CO₃(aq) + H₂O(ℓ) ⇌ H₃O⁺(aq) + HCO₃⁻(aq)

Henderson-Hasselbalch Equation
  • Equation Form:


    • pH=pKa+lograc[A−][HA]pH = pK_a + log rac{[A^-]}{[HA]}

    • Where:

    • pK<em>a=−logK</em>apK<em>a = -logK</em>a

    • Important ratios for buffer calculations are based on concentrations, not absolute amounts.

Example Calculations
  • Example 1:

    • For a buffer with 0.050 M pyruvic acid and 0.060 M sodium pyruvate:

    • Given: Ka=3.2imes10−3K_a = 3.2 imes 10^{-3}

    • Calculation:

      • pH=−log(3.2imes10−3)+lograc0.0600.050 =2.49+0.08=2.57pH = -log(3.2 imes 10^{-3}) + log rac{0.060}{0.050} \ = 2.49 + 0.08 = 2.57

  • Example 2:

    • Ratio of HPO42−/H2PO4−HPO₄^{2-}/H₂PO₄^{-} in blood at pH = 7.40:

    • Ka(H2PO4−)=6.2imes10−8K_a(H₂PO₄^{-}) = 6.2 imes 10^{-8}

    • Calculation:

      • 7.40=−log(6.2imes10−8)+lograc[HPO42−][H2PO4−]7.40 = -log(6.2 imes 10^{-8}) + log rac{[HPO₄^{2-}]}{[H₂PO₄^{-}]}

      • lograc[HPO42−][H2PO4−]=0.192orac[HPO42−][H2PO4−]=1.5log rac{[HPO₄^{2-}]}{[H₂PO₄^{-}]} = 0.192 o rac{[HPO₄^{2-}]}{[H₂PO₄^{-}]} = 1.5

Properties of Common Buffers
  • Buffers generally have a useful range of:

    • pH=pKam±1pH = pK_a m{±} 1

    • This corresponds to a 10:1 or 1:10 ratio of [A⁻]/[HA].

Buffer Capacity
  • Definition:

    • The amount of acid or base that can be added to a buffer without causing significant pH changes.

    • It is determined by the concentrations of [A⁻] and [HA].

Acid-Base Titrations
  1. Process: A standard solution (titrant) is added to the analyte until the equivalence point is reached, where stoichiometric amounts have reacted.

  2. Indicators: Used to determine the endpoint:

    • A visible color change indicates the endpoint, which should be close to the equivalence point (where the reaction is complete).

  3. Calculations at Equivalence:

    • At equivalence:

      • n<em>exttitrant=n</em>extanalyten<em>{ ext{titrant}} = n</em>{ ext{analyte}}

      • n<em>exttitrant=V</em>exttitrantimes[exttitrant]n<em>{ ext{titrant}} = V</em>{ ext{titrant}} imes [ ext{titrant}]

  4. Common Indicators:

    • Methyl red, bromothymol blue, and phenolphthalein have distinct pH ranges for color changes.

Titration of Weak Acids and Bases
  • Characteristics differ from strong acids/bases due to equilibrium between acid/base.

  • Henderson-Hasselbalch can be used to determine pH at various titration points, particularly at and beyond equivalence.

Solubility & Ksp
  • Slightly Soluble Compounds: Example: AgCl

    • Ksp=[Ag+][Cl−]Ksp = [Ag^+][Cl^-]

    • Calculation of solubility:

    • Ksp=1.8imes10−10=S2oS=1.3imes10−5extMKsp = 1.8 imes 10^{-10} = S^2 o S = 1.3 imes 10^{-5} ext{ M}

  • Common Ion Effect: Solubility decreases in presence of a common ion.

Precipitation and Solubility Product (Ksp)
  • Q vs. Ksp:

    • If Q > Ksp, precipitation will occur; if Q < Ksp, dissolution will occur.

  • Example Calculation for Precipitation: Mixing acid and ionic solutions to predict precipitate formation by calculating Q and comparing to Ksp.