Alberta Basic Licence Driver Assessment Flashcards
Legal and Regulatory Requirements for Alberta Drivers
According to the Alberta demerit point system, a fully licensed driver (non-learner and non-probationary) will have their operator's license suspended once they accumulate points. For learners in the Graduated Driver Licensing (GDL) program holding a Class 7 operator's license, the suspension threshold is lower, occurring when the driver accumulates demerits. Under the GDL program, a person must serve as a probationary Class 5 driver for a minimum of years. Additionally, Class 7 learners are strictly prohibited from driving a vehicle between the hours of midnight and
Regarding the administrative side of licensing, the law stipulates that the driver is the person responsible and legally obligated to report any medical condition, change in health, or physical disability that may impact their ability to operate a vehicle safely. For drivers under the age of , a parent has the right to withdraw previously given parental consent for an operator's license, provided the individual is still under and is not married or self-supporting.
In the event of a collision, a driver is required to report the incident to the police if any persons have been injured or killed, or if the combined damage to all vehicles and involved property exceeds . Furthermore, it is the driver's legal responsibility to ensure that all passengers under the age of are properly restrained within the vehicle using seat belts or child safety seats as required. The law in Alberta requires that seat belts must be worn properly by the driver at all times.
Speed Limits and Specialized Traffic Zones
The basic speed limit outside of a city, town, or village on a primary highway is unless otherwise posted. Speed limit signs represent the maximum speed permitted when driving conditions are favourable; they do not mandate that speed under all conditions. In a construction zone, the posted speed limit must be obeyed at all times, regardless of whether workers are present or if it is daylight.
School and playground zones have specific regulations. Unless otherwise posted, the maximum speed permitted in a school zone in a rural area at on a school day is . School zone speed limits are generally in effect on school days during the following hourly blocks: to , to , and to Playground zones are in effect daily from to hour after sunset.
Parking Regulations and Specific Distance Requirements
When parking a vehicle, specific distance requirements from road features and curbs must be maintained. A vehicle must be parked at a minimum distance of from a fire hydrant. When legal parking is permitted near a Stop sign, the driver must maintain a minimum distance of from that sign.
For specific parking maneuvers, the following rules apply: in an angle park, the vehicle's front wheel must be within a maximum distance of from the nearest curb. For parallel parking, the wheels closest to the curb must also be within a maximum distance of from the curb. When parking a vehicle uphill on a two-way road with a curb, the front wheels should be turned to the left toward the center of the road. Parking in spaces reserved for persons with disabilities is strictly prohibited unless the vehicle displays a proper identifying placard or license plate.
Intersection Protocols and Right-of-Way Rules
When approaching an intersection with a steady yellow traffic light, a driver must stop before the intersection unless the stop cannot be made in safety. A flashing yellow traffic light serves as a warning to proceed with caution. At a flashing red traffic light, the driver must come to a complete stop and proceed only when it is safe to do so. If an intersection displays a green right-turn arrow and a red light, the driver may proceed in the direction of the arrow without stopping, provided it is safe. Right turns on a red light are permitted after a complete stop, provided there is no sign prohibiting the turn and the driver yields to other traffic and pedestrians.
Uncontrolled intersections are defined as those having no traffic control signal lights or traffic signs. At an uncontrolled "T" intersection where two vehicles approach at right angles at approximately the same time, the vehicle on the left must yield the right-of-way. In a traffic circle, the entering driver must yield to vehicles already in the circle. When facing a Merge sign, a driver should watch for a gap in the highway traffic, adjust to highway speed within the acceleration lane, and blend in smoothly.
Specific yielding rules apply to certain vehicles and pedestrians. Drivers must yield the right-of-way to funeral processions and must not break through the line of vehicles. When a vehicle is stopped to allow a pedestrian to cross the road, it is illegal for other vehicles approaching from the rear to pass the stopped vehicle. In urban areas, if a pedestrian is standing at a crosswalk with their arm raised at a right angle pointing to the opposite curb, drivers must stop and yield. When approached by an emergency vehicle with a siren from any direction on a two-way road, drivers must move as close to the right curb as possible and stop.
Railway Crossings and School Buses
When approaching a railway crossing with activated flashing red lights and bells, a driver must stop at least from the nearest rail and wait until the train has passed. A large "X" painted on the pavement is a hazard marker indicating a railway crossing ahead.
When approaching a school bus from the rear that is displaying alternating flashing amber lights, a driver must be prepared to stop as this indicates the red lights will soon activate. If the alternating flashing red lights are activated, the driver must stop behind the bus and remain stopped until the lights stop flashing. These rules are critical for student safety during loading and unloading.
Road Surface Markings and Signaling Information
A solid yellow line paired with a broken yellow line on a highway indicates that passing is permitted if the broken line is on the driver's side. In urban areas, a single solid white line between driving lanes indicates that lane changing is not permitted. A large "X" symbol painted on a lane or pavement represents a railway crossing. A traffic-lane control light with an illuminated red "X" means that travel is not permitted in that designated lane.
Shoulder checking is defined as the act of glancing toward the blind spot in the direction the driver intends to move. When a driver is being followed by a vehicle attempting to pass on a two-way road, the driver should stay in their lane and move slightly to the right portion of the lane to facilitate the pass. Before leaving a parallel parking space on the right side of the road, a driver should perform a shoulder check to the left.
Advanced Vehicle Handling and Safe Operations
For safe vehicle operation, drivers in urban areas should scan the road approximately to ahead. The 2-second rule is a recommended method to judge a safe following distance and is considered accurate at any speed. "Nighttime" is defined in the Basic Licence Driver's Handbook as the period beginning after sunset and ending before the following sunrise. During reduced visibility due to fog, smoke, or snow, drivers should use their low beam headlights. High beam headlights must be dimmed at night when approaching another vehicle from behind at a minimum distance of . "Over-driving" one's headlights refers to traveling at a speed where the stopping distance is greater than the distance visible in the headlights.
When reversing in a straight line, the driver should place their left hand at the top of the steering wheel and look over their right shoulder through the rear window. To bring a vehicle to a normal, smooth stop, one should apply brake pressure, ease off slightly just before the vehicle stops, and then re-apply pressure to stop fully. In vehicles without anti-lock brakes, threshold braking involves applying even braking force to the point just before the wheels lock and easing off slightly if locking occurs.
Most skids are the result of driver error. When recovering from a skid, the driver should steer in the direction they want the front of the vehicle to go. If the right tires travel off the paved portion of the road, the driver should keep a firm grip on the wheel, ease off the gas, and gradually return to the pavement. When traveling through a curve on a highway, the recommended method is to reduce speed before the curve, stay in the lane, and gently accelerate after entering the curve.
Lane Definitions and Passing Protocols
An acceleration lane is a lane in a merge area used by vehicles entering a highway to reach highway speeds. Conversely, a deceleration lane is a lane where vehicles reduce speed when exiting a highway. A "parking lane" is defined as that portion of a primary highway between the edge of the roadway to the right of the direction of traffic and the nearest solid white line (not the center line).
When passing other vehicles on a two-lane highway, a driver should pass on the left only when safe. When passing a large truck, it is important to leave extra room before returning to the truck's lane. It is unsafe to pass a loaded log-haul truck that is turning because a danger zone exists where the overhang of the logs could block all lanes of the highway. When a "PASSING LANE AHEAD" sign is posted, slower-moving vehicles should move into the right lane when it is safe to do so. Dual turns at an intersection are only permitted when indicated by pavement markings or traffic control signs. Slow-moving vehicle signs must be displayed on the rear of any vehicle that normally travels at speeds less than .", "title": "Alberta Basic License Driver's Assessment Study Notes"}