Essentials: Units, Measurement, and Problem Solving

Reliability of Measurement: Accuracy, Precision, and Instrument Reading

  • Definitions of Accuracy and Precision:
    • Precision: Refers to how close a series of measurements are to one another, or the reproducibility of a measurement.
    • Accuracy: Refers to how close a measured value is to the actual or true value.

Dartboard targets illustrating accuracy and precision

Bar graphs showing experimental mass measurements by Students A, B, and C

  • Analysis of Student Experimental Data (True Mass = 10.00 g10.00\,\text{g}):

    • Student A:
    • Trial 1: 10.49 g10.49\,\text{g}
    • Trial 2: 9.79 g9.79\,\text{g}
    • Trial 3: 9.92 g9.92\,\text{g}
    • Trial 4: 10.31 g10.31\,\text{g}
    • Average: 10.13 g10.13\,\text{g}
    • Assessment: Imprecise and Inaccurate. The individual values differ significantly from each other (scattered from 9.79 g9.79\,\text{g} to 10.49 g10.49\,\text{g}), and the calculated average of 10.13 g10.13\,\text{g} deviates from the true mass of 10.00 g10.00\,\text{g}.
    • Student B:
    • Trial 1: 9.78 g9.78\,\text{g}
    • Trial 2: 9.82 g9.82\,\text{g}
    • Trial 3: 9.75 g9.75\,\text{g}
    • Trial 4: 9.80 g9.80\,\text{g}
    • Average: 9.79 g9.79\,\text{g}
    • Assessment: Precise, but Inaccurate. The measurements are tightly clustered together within a narrow range (9.75 g9.75\,\text{g} to 9.82 g9.82\,\text{g}), showing high precision. However, the average value of 9.79 g9.79\,\text{g} is systematically lower than the true mass of 10.00 g10.00\,\text{g}, indicating low accuracy (often caused by a systematic error in equipment calibration).
    • Student C:
    • Trial 1: 10.03 g10.03\,\text{g}
    • Trial 2: 9.99 g9.99\,\text{g}
    • Trial 3: 10.03 g10.03\,\text{g}
    • Trial 4: 9.98 g9.98\,\text{g}
    • Average: 10.01 g10.01\,\text{g}
    • Assessment: Accurate and Precise. The individual measurements are closely grouped together and the average value of 10.01 g10.01\,\text{g} is extremely close to the true mass of 10.00 g10.00\,\text{g}.
  • Guidelines for Recording Measurements from Laboratory Instruments:

    • The recorded precision of a measurement reflects the uncertainty of the measuring device and must always be preserved.
    • Analog Measuring Devices with Markings / Tic Marks:
    • Read all digits known with certainty based on the calibrated line markings.
    • Estimate one additional digit beyond the smallest marked increment.
    • Electronic / Digital Measuring Devices:
    • Record all digits exactly as shown on the digital display.
  • Instrument Reading Practice Problems:

Liquid volume reading on a buret with scale markings

  • Liquid Volume Measurement:
    • Liquid volumes in graduated glassware are measured at the bottom of the curved liquid surface, known as the meniscus.
    • On the buret scale shown, major markings represent whole milliliters (3 mL3\,\text{mL}, 4 mL4\,\text{mL}, 5 mL5\,\text{mL}), and minor markings represent tenths of a milliliter (0.1 mL0.1\,\text{mL}).
    • The bottom of the meniscus lies between the 4.5 mL4.5\,\text{mL} and 4.6 mL4.6\,\text{mL} scale lines.
    • Reading all certain digits (4.5 mL4.5\,\text{mL}) and estimating the final digit yields a recorded volume of 4.56 mL4.56\,\text{mL} (or 4.57 mL4.57\,\text{mL}).

Electronic analytical balance reading 4.60 g

  • Electronic Mass Measurement:
    • The digital balance display shows a value of 4.60 g.
    • Following the rule for electronic instruments, all displayed digits must be recorded.
    • Recorded mass: 4.60 g4.60\,\text{g}.

Significant Figures and Computational Rules

  • Purpose of Significant Figures:

    • Conserves the precision of experimental measurements throughout mathematical calculations.
    • Ensures that calculated results do not imply greater precision than the original measured data.
  • Rules for Determining the Number of Significant Figures:

    • Nonzero Digits: All nonzero digits are significant (e.g., 24.324.3 has 3 significant figures).
    • Interior Zeroes: Zeroes between nonzero digits are significant (e.g., 40084008 has 4 significant figures).
    • Leading Zeroes: Zeroes to the left of the first nonzero digit are NOT significant; they serve only as decimal placeholders (e.g., 0.00250.0025 has 2 significant figures).
    • Trailing Zeroes After a Decimal Point: Trailing zeroes after a decimal point are ALWAYS significant (e.g., 43.0043.00 has 4 significant figures).
    • Trailing Zeroes Before an Expressed Decimal Point: Trailing zeroes between a nonzero digit and a written decimal point are ALWAYS significant (e.g., 450.450. has 3 significant figures).
    • Ambiguous Trailing Zeroes: Trailing zeroes at the end of a number without an explicit decimal point (e.g., 12001200) are ambiguous. Scientific notation must be used to clearly specify precision.
  • Rules for Significant Figures in Calculations:

    • Multiplication and Division: The final answer must contain the same number of significant figures as the factor with the fewest number of significant figures.
    • Addition and Subtraction: The final answer must contain the same number of decimal places as the measurement with the fewest number of decimal places.
    • Rounding Rules:
    • Examine the digit immediately to the right of the last significant digit.
    • If the digit is 55 or greater, round the last significant digit up by 1.
    • If the digit is 44 or less, leave the last significant digit unchanged.
    • Exact Numbers:
    • Exact numbers have an infinite number of significant figures and do NOT limit the number of significant figures in a calculation.
    • Exact numbers include discrete counted quantities (e.g., 33 apples) or defined conversion equivalences (e.g., 1 in=2.54 cm1\,\text{in} = 2.54\,\text{cm}).
  • Significant Figures Practice Problems:

    • Problem 4a: Identify significant figures and convert 450.0450.0 to scientific notation.
    • Analysis: Trailing zeroes after a decimal point are significant. There are 4 significant figures.
    • Scientific Notation: 4.500×1024.500 \times 10^2
    • Problem 4b: Identify significant figures and convert 0.0300.030 to scientific notation.
    • Analysis: Leading zeroes are not significant; trailing zero after the decimal point is significant. There are 2 significant figures.
    • Scientific Notation: 3.0×10−23.0 \times 10^{-2}
    • Problem 5a: Calculate 0.0230×0.500.0230 \times 0.50
    • 0.02300.0230 has 3 significant figures; 0.500.50 has 2 significant figures.
    • Raw result: 0.01150.0115
    • Rounded to 2 significant figures: 0.0120.012 (or 1.2×10−21.2 \times 10^{-2})
    • Problem 5b: Calculate 1.050−2.51.050 - 2.5
    • 1.0501.050 has 3 decimal places; 2.52.5 has 1 decimal place.
    • Raw result: −1.45-1.45
    • Rounded to 1 decimal place: −1.5-1.5
    • Problem 5c: Calculate 0.010+0.015+0.0183\frac{0.010 + 0.015 + 0.018}{3}
    • Numerator addition: 0.010+0.015+0.018=0.0430.010 + 0.015 + 0.018 = 0.043 (3 decimal places, yielding 2 significant figures).
    • Division by 33: The divisor 33 is an exact counted number (number of terms) and does not limit precision.
    • Raw result: 0.0433=0.014333...\frac{0.043}{3} = 0.014333...
    • Rounded to 2 significant figures: 0.0140.014 (or 1.4×10−21.4 \times 10^{-2})
    • Problem 5d: Calculate 1.002−0.9993.754\frac{1.002 - 0.999}{3.754}
    • Numerator subtraction: 1.002−0.999=0.0031.002 - 0.999 = 0.003 (both numbers have 3 decimal places; the result 0.0030.003 has 1 significant figure).
    • Division: 0.0033.754=0.000799147...\frac{0.003}{3.754} = 0.000799147...
    • Rounded to 1 significant figure: 0.00080.0008 (or 8×10−48 \times 10^{-4})

International System of Units (SI) Base Units and Prefixes

  • Overview of SI Units:
    • Scientists worldwide utilize the International System of Units (SI), which is built upon the metric system.
    • Metric/SI prefixes modify the magnitude of base units by factors of 10.

Table 1.1 SI Base Units

QuantityUnit NameSymbol
LengthMeterm\text{m}
MassKilogramkg\text{kg}
TimeSeconds\text{s}
TemperatureKelvinK\text{K}
Amount of substanceMolemol\text{mol}
Electric currentAmpereA\text{A}
Luminous intensityCandelacd\text{cd}

Table 1.2 SI Prefix Multipliers

PrefixSymbolMultiplier (Decimal)Multiplier (Power of 10)
exaE\text{E}1,000,000,000,000,000,0001,000,000,000,000,000,000101810^{18}
petaP\text{P}1,000,000,000,000,0001,000,000,000,000,000101510^{15}
teraT\text{T}1,000,000,0001,000,000,000101210^{12}
gigaG\text{G}1,000,000,0001,000,000,00010910^9
megaM\text{M}1,000,0001,000,00010610^6
kilok\text{k}1000100010310^3
decid\text{d}0.10.110−110^{-1}
centic\text{c}0.010.0110−210^{-2}
millim\text{m}0.0010.00110−310^{-3}
microμ\mu0.0000010.00000110−610^{-6}
nanon\text{n}0.0000000010.00000000110−910^{-9}
picop\text{p}0.0000000000010.00000000000110−1210^{-12}
femtof\text{f}0.0000000000000010.00000000000000110−1510^{-15}
attoa\text{a}0.0000000000000000010.00000000000000000110−1810^{-18}
  • SI Prefix Practice Conversions:
    • Problem 6a: 1 kg=1000 g=103 g1\,\text{kg} = 1000\,\text{g} = 10^3\,\text{g}
    • Problem 6b: 1 ms=0.001 s=10−3 s1\,\text{ms} = 0.001\,\text{s} = 10^{-3}\,\text{s}
    • Problem 6c: 1 nm=0.000000001 m=10−9 m1\,\text{nm} = 0.000000001\,\text{m} = 10^{-9}\,\text{m}

Dimensional Analysis and Unit Conversions

  • Principles of Dimensional Analysis:

    • Units act as a mathematical guide during problem-solving.
    • Units must be carried through all stages of calculations and included with final answers.
    • Any algebraic operation applied to a number must be applied equally to its associated unit.
    • Conversion factors express equivalent quantities in different units as a ratio equal to 1.
  • Systematic Four-Step Problem-Solving Approach:

    • Sort: Identify given information, including numerical values and starting units, and specify the desired quantity and target units.
    • Strategize: Formulate a conceptual path or flow chart mapping the initial units to the final target units using relevant conversion factors.
    • Solve: Set up dimensional analysis equations so that unwanted units cancel diagonally; execute arithmetic operations and round the final answer to the correct number of significant figures.
    • Check: Evaluate the final result to confirm that units cancel properly and that the magnitude of the answer makes physical sense.
  • Specialized Units of Length and Volume:

    • Ångström (A˚\text{\AA}): A non-SI unit of length used for atomic and molecular dimensions.     1 A˚=10−10 m1\,\text{\AA} = 10^{-10}\,\text{m}
    • Volume: A derived unit representing three-dimensional space.     Volume of a cube=(edge length)3\text{Volume of a cube} = (\text{edge length})^3
    • Key Volume Equivalence:1 mL=1 cm31\,\text{mL} = 1\,\text{cm}^3
  • Worked Dimensional Analysis Problems:

    • Problem 7: Calculate the number of picoseconds in 2.0 hours2.0\,\text{hours}.
    • Sort: Given t=2.0 ht = 2.0\,\text{h}; find time in picoseconds (ps\text{ps}).
    • Strategize: Path: hours→minutes→seconds→picoseconds\text{hours} \rightarrow \text{minutes} \rightarrow \text{seconds} \rightarrow \text{picoseconds}
      • Equivalence factors: 1 h=60 min1\,\text{h} = 60\,\text{min}, 1 min=60 s1\,\text{min} = 60\,\text{s}, 1 ps=10−12 s1\,\text{ps} = 10^{-12}\,\text{s}
    • Solve:2.0 h×60 min1 h×60 s1 min×1 ps10−12 s=7.2×1015 ps2.0\,\text{h} \times \frac{60\,\text{min}}{1\,\text{h}} \times \frac{60\,\text{s}}{1\,\text{min}} \times \frac{1\,\text{ps}}{10^{-12}\,\text{s}} = 7.2 \times 10^{15}\,\text{ps}
    • Check: Hours cancel to minutes, minutes to seconds, and seconds to picoseconds. Because a picosecond is a subatomic timeframe (10−12 s10^{-12}\,\text{s}), a massive number of picoseconds in 2.0 hours2.0\,\text{hours} is correct.
    • Problem 8: Convert a chlorine atomic radius of 99 pm99\,\text{pm} to Ångströms (A˚\text{\AA}).
    • Equivalence factors: 1 pm=10−12 m1\,\text{pm} = 10^{-12}\,\text{m}, 1 A˚=10−10 m1\,\text{\AA} = 10^{-10}\,\text{m}
    • Calculation:99 pm×10−12 m1 pm×1 A˚10−10 m=0.99 A˚99\,\text{pm} \times \frac{10^{-12}\,\text{m}}{1\,\text{pm}} \times \frac{1\,\text{\AA}}{10^{-10}\,\text{m}} = 0.99\,\text{\AA}
    • Problem 9: Convert 1 m31\,\text{m}^3 to cm3\text{cm}^3 and to mL\text{mL}.
    • Conversion factor for length: 1 m=100 cm=102 cm1\,\text{m} = 100\,\text{cm} = 10^2\,\text{cm}
    • Cube both sides of the linear equivalence:       (1 m)3=(102 cm)3=106 cm3=1,000,000 cm3(1\,\text{m})^3 = (10^2\,\text{cm})^3 = 10^6\,\text{cm}^3 = 1,000,000\,\text{cm}^3
    • Convert to milliliter (mL\text{mL}):       Since 1 cm3=1 mL1\,\text{cm}^3 = 1\,\text{mL}, 106 cm3=106 mL=1,000,000 mL10^6\,\text{cm}^3 = 10^6\,\text{mL} = 1,000,000\,\text{mL}.

Temperature Scales and Thermometric Conversions

  • Definition of Temperature:
    • Temperature is a measure of the average kinetic energy of the constituent atoms or molecules of a substance.

Comparison of Fahrenheit, Celsius, and Kelvin temperature scales

  • Temperature Scales and Reference Points:

    • Fahrenheit Scale (∘F^{\circ}\text{F}):
    • Water freezes at 32 ∘F32\,^{\circ}\text{F}.
    • Water boils at 212 ∘F212\,^{\circ}\text{F}.
    • Difference between freezing and boiling points: 180 Fahrenheit degrees180\,\text{Fahrenheit degrees}.
    • Absolute zero: −459 ∘F-459\,^{\circ}\text{F}.
    • Celsius Scale (∘C^{\circ}\text{C}):
    • Water freezes at 0.00 ∘C0.00\,^{\circ}\text{C}.
    • Water boils at 100 ∘C100\,^{\circ}\text{C}.
    • Difference between freezing and boiling points: 100 Celsius degrees100\,\text{Celsius degrees}.
    • Absolute zero: −273 ∘C-273\,^{\circ}\text{C}.
    • Kelvin Scale (K\text{K}):
    • The SI base unit of temperature.
    • Water freezes at 273 K273\,\text{K}.
    • Water boils at 373 K373\,\text{K}.
    • Difference between freezing and boiling points: 100 kelvins100\,\text{kelvins}.
    • Absolute zero: 0 K0\,\text{K} (point of zero thermal motion).
  • Temperature Conversion Formulas:

    • Celsius to Kelvin Conversion:TK=T∘C+273.15T_{\text{K}} = T_{^{\circ}\text{C}} + 273.15
    • Fahrenheit to Celsius Conversion:T∘C=T∘F−321.8T_{^{\circ}\text{C}} = \frac{T_{^{\circ}\text{F}} - 32}{1.8}
    • Celsius to Fahrenheit Conversion (Rearranged):T∘F=(1.8×T∘C)+32T_{^{\circ}\text{F}} = (1.8 \times T_{^{\circ}\text{C}}) + 32
  • Temperature Practice Problems:

    • Problem 10: Identify one similarity and one difference between these temperature scales.
    • Similarity: The Celsius degree and the kelvin are identical in size (1 ∘C=1 K1\,^{\circ}\text{C} = 1\,\text{K}). A temperature change of 1 ∘C1\,^{\circ}\text{C} corresponds directly to a change of 1 K1\,\text{K}.
    • Difference: The zero reference points differ. The Kelvin scale is an absolute scale (0 K0\,\text{K} is absolute zero), whereas 0 ∘C0\,^{\circ}\text{C} is set to the freezing point of water (273.15 K273.15\,\text{K}). Furthermore, Fahrenheit degrees are smaller (1 ∘F=59 ∘C1\,^{\circ}\text{F} = \frac{5}{9}\,^{\circ}\text{C}).
    • Problem 11: Convert room temperature of 25.0 ∘C25.0\,^{\circ}\text{C} to Kelvin (K\text{K}) and Fahrenheit (∘F^{\circ}\text{F}).
    • Conversion to Kelvin:       TK=25.0+273.15=298.15→298.2 KT_{\text{K}} = 25.0 + 273.15 = 298.15 \rightarrow 298.2\,\text{K}
    • Conversion to Fahrenheit:       T∘F=(1.8×25.0)+32=45+32=77.0 ∘FT_{^{\circ}\text{F}} = (1.8 \times 25.0) + 32 = 45 + 32 = 77.0\,^{\circ}\text{F}

Density and Mass-Volume Relationships

  • Definition of Density:

    • Density (dd) is an intensive physical property defined as the ratio of mass (mm) to volume (VV):     d=mVd = \frac{m}{V}
  • Density Practice Problems:

    • Problem 12: Determine the units of density for a block with a mass of 1.0 g1.0\,\text{g} and a volume of 1.0 cm31.0\,\text{cm}^3.     Density units=gcm3=g/cm3\text{Density units} = \frac{\text{g}}{\text{cm}^3} = \text{g/cm}^3
    • Problem 13a: Calculate the mass in grams of a 2.50 mL2.50\,\text{mL} sample of a liquid with a density of 0.938 g/mL0.938\,\text{g/mL}.
    • Formula: m=d×Vm = d \times V
    • Calculation:       m=0.938 g/mL×2.50 mL=2.345 gm = 0.938\,\text{g/mL} \times 2.50\,\text{mL} = 2.345\,\text{g}
    • Rounded to 3 significant figures: 2.35 g2.35\,\text{g}
    • Problem 13b: Calculate the volume in milliliters of 8.92 g8.92\,\text{g} of a substance with a density of 0.938 g/mL0.938\,\text{g/mL}.
    • Formula: V=mdV = \frac{m}{d}
    • Calculation:       V=8.92 g0.938 g/mL=9.50959... mLV = \frac{8.92\,\text{g}}{0.938\,\text{g/mL}} = 9.50959...\,\text{mL}
    • Rounded to 3 significant figures: 9.51 mL9.51\,\text{mL}

Energy Classifications and Units

  • Definition of Energy:
    • Energy is defined as the capacity to do work.

Flowchart classifying energy into kinetic, potential, thermal, and chemical energy

  • Classification of Energy:

    • Kinetic Energy: Energy associated with the motion of an object.
    • Thermal Energy: A form of kinetic energy associated with the temperature and motion of atoms or molecules.
    • Potential Energy: Energy associated with the position or composition of an object.
    • Chemical Energy: A form of potential energy associated with the relative positions of electrons and atomic nuclei within chemical bonds.
  • Energy Units:

    • The derived SI unit of energy is the joule (J\text{J}).     1 J=1 kg⋅m2/s21\,\text{J} = 1\,\text{kg}\cdot\text{m}^2/\text{s}^2
  • Energy Conversion Practice Problem:

    • Problem 14: Convert 154.0 J/mol154.0\,\text{J/mol} to kJ/mol\text{kJ/mol}.
    • Equivalence factor: 1 kJ=1000 J1\,\text{kJ} = 1000\,\text{J}
    • Calculation:154.0 J/mol×1 kJ1000 J=0.1540 kJ/mol154.0\,\text{J/mol} \times \frac{1\,\text{kJ}}{1000\,\text{J}} = 0.1540\,\text{kJ/mol}

Textbook Review and Practice Problems Reference

  • Assigned Chapter Review Questions:
    • Review Questions: 1, 2, 6, 7, 9, 10, 11, 13, 15, 18
  • Assigned Problems by Topic:
    • Problems: 19, 21, 23, 25, 27, 29, 33, 35, 37, 39, 41, 45, 47, 49, 51, 53, 55, 57, 59, 61, 63, 65, 73, 77, 79
  • Cumulative Problems:
    • Problems: 95, 101, 103
  • Conceptual Problems:
    • Problems: 117