Untitled

PRINCIPLES OF MOLECULAR AND IMMUNOLOGIC STUDIES

Overview of the Course

  • Course Title: Principles of Molecular and Immunologic Studies (MLSC 3063)
  • Instructor: Professor Labiner
  • Module: 2
  • Lecture: 1
  • Focus: Nucleic Acid Extraction

Nucleic Acid Extraction: Objectives

Students will be able to:

  1. List Types of Specimens: Identify acceptable specimens for isolating nucleic acid.
  2. Compare Isolation Techniques: Contrast organic, inorganic, and solid-phase approaches for isolating cellular DNA.
  3. DNA Precipitation Conditions: Note the chemical conditions under which DNA precipitates and goes into solution.
  4. Reagents Purpose: State the purpose of each reagent used in DNA isolation procedures.
  5. Quantification Methods: Describe methods (gel-based, spectrophotometric, and fluorometric) to determine the quantity and quality of DNA and RNA preparations.
  6. Concentration Calculation: Calculate the concentration and yield of DNA and RNA from a given nucleic acid preparation.
  7. RNA Isolation Distinction: Distinguish between the isolation processes for total RNA and messenger RNA (mRNA).

Purpose for Nucleic Acid Extraction

  • Nucleic Acids Release: Nucleic acids must be released from cells for analysis.
  • Target Purity: Focus on isolating pure target nucleic acids (DNA or RNA).
  • Contaminant Removal: Ensure removal of proteins, carbohydrates, and lipids from the extraction process.
  • Nucleated Cell Isolation: Aim to isolate nucleated cells primarily for nucleic acid extraction.
  • Cell Lysis and Purification: Conduct cell lysis followed by purification processes.
  • Confirm Purity and Concentration: Verify the purity and concentration of the extracted nucleic acids.

Specimens for Nucleic Acid Extraction

Expected Yield from Various Specimens

  • Blood: yields typically around 20–50 µg
  • Buffy Coat: yields typically around 50–200 µg
  • Bone Marrow: yields typically around 100–500 µg
  • Solid Tissue: yields typically around 1–10 µg
  • Lavage Fluids: yields typically around 2–250 µg
  • Bacteria, Viruses, & Fungi: yields typically around 10 µg – 1 mg
  • Mitochondria: yields typically around 2–10 µg

Adequate Specimens for Polymerase Chain Reaction (PCR)

  • Dried Blood: yields 0.04 – 0.7 µg
  • Buccal Cells: yields 1–10 µg
  • Saliva: yields 5–15 µg DNA/ml
  • Bone (Teeth): yields 30–50 µg
  • Hair Follicles: yields 0.1–0.2 µg
  • Cerebrospinal Fluid: yields 0.3–3 µg
  • Fixed Tissue: yields 6–50 µg

Considerations for Choosing an Isolation Method

  • Processing Speed: The duration required for the entire extraction process.
  • Ease of Use: User-friendliness of the extraction method.
  • Yield: Amount of extracted DNA or RNA.
  • Quality: The integrity of the DNA or RNA obtained from the process.
  • Purity: Assessing the absence of contaminants in the isolated nucleic acids.
  • Quality Assurance Criteria: Standards and benchmarks for the extraction process.
  • Cost: Financial implications of the preparation method.

DNA Extraction Methods

Organic Extraction Method

  • Description: Involves the use of organic solvents, specifically phenol and chloroform.
  • Steps:
    1. Lysis using sodium hydroxide (NaOH), sodium dodecyl sulfate (SDS).
    2. Acidification utilizing acetic acid and salt.
    3. Extraction via phenol and chloroform.
    4. DNA precipitation utilizing ethanol.

Inorganic Extraction Method

  • Description: Utilizes inorganic chemicals and is often simpler and faster.
  • Steps:
    1. Lysis using Tris buffer, EDTA, SDS.
    2. Protein Precipitation through sodium acetate.
    3. DNA Precipitation with isopropanol.

Solid Phase Extraction Method

  • Description: DNA is immobilized on solid support mediums like beads or columns.
  • Steps:
    1. Lysis using supplied reagents.
    2. Acidification via supplied reagents.
    3. Adsorption occurs at low pH levels.
    4. Washing utilizes supplied buffer to remove impurities.
    5. Elute DNA using low salt conditions.

Puregene and QIAamp Spin Column Procedures

  • Puregene DNA Procedure:
    • Involves lysis, protein precipitation, DNA precipitation, followed by washing with ethanol and elution.
  • QIAamp Spin Column Procedure:
    • Similar in overall purpose, utilizing microfuges and vacuum manifolds for quick isolation of pure DNA or RNA.

DNA Isolation Method Comparison

Liquid Phase vs. Solid Phase Extraction

  • Liquid Phase:
    • Lysing of red blood cells (RBCs) involved.
    • Cells are lysed, the sample is applied, followed by washing and separation of proteins from DNA.
    • Requires precipitation of DNA with alcohol and subsequent rehydration.
  • Solid Phase:
    • Pre-lyse cells prior to applying techniques.
    • Faster extraction with fewer steps; precipitation of DNA is not required.

Method Comparison

  • Organic:
    • Limited sample availability.
    • Slow and labor-intensive, requiring fume hood due to toxicity from phenol and chloroform.
  • Inorganic:
    • Fast and easy method.
    • Uses non-toxic materials, doesn't require fume hood or hazardous waste disposal, producing high-quality DNA.
  • Solid Phase:
    • Quick and easy process.
    • Does not require precipitation of DNA.

Measurement of Nucleic Acid

Assessment Techniques

  • Importance: Minimizes variability; methods assess the quantity, quality, and molecular size of nucleic acids.
  1. Agarose Gel Electrophoresis: Tool for size separation and quality checking.
  2. Fluorometry: Measures specific nucleic acid quantities using fluorescence.
  3. Spectrophotometry: General method for detecting and quantifying nucleic acids.

Spectrophotometry Techniques

  • Concentration Calculation:
    • (extOD260=50extμg/mldsDNA)( ext{OD}_{260} = 50 ext{μg/ml dsDNA})
    • (extConcentration=extμg/mlimesextml)( ext{Concentration} = ext{μg/ml} imes ext{ml})
    • Yield calculation: (extOD<em>260/extOD</em>280)( ext{OD}<em>{260}/ ext{OD}</em>{280}) measure of purity, where:
    • Good DNA: extOD<em>260/extOD</em>280ext 1.6ext−2.0ext{OD}<em>{260}/ ext{OD}</em>{280} ext{ ~ } 1.6 ext{ - } 2.0
    • Poor DNA: <1.6< 1.6 (Excess protein or contaminants present)

Quantifying DNA/Nucleic Acid

UV Spectrophotometry Calculation

  1. For DNA:
    • (ext[DNA]=(extA<em>260−extA</em>320)imesextdilutionfactorimes50extμg/mL)( ext{[DNA]} = ( ext{A}<em>{260} - ext{A}</em>{320}) imes ext{dilution factor} imes 50 ext{μg/mL})
  2. For RNA:
    • (ext[RNA]=(extA<em>260−extA</em>320)imesextdilutionfactorimes40extμg/mL)( ext{[RNA]} = ( ext{A}<em>{260} - ext{A}</em>{320}) imes ext{dilution factor} imes 40 ext{μg/mL})
  • The final concentration represents the amount of nucleic acid per mL of solution.
  • Measurements:
    • extOD260ext{OD}_{260} measures nucleic acids.
    • extOD280ext{OD}_{280} measures protein.
    • extOD320ext{OD}_{320} assesses background scatter.

Manual Yield Calculation Example

Example of manual quantitation calculation:

  • Given a dilution of 1:20 and an A260 of 0.20 absorbance units:
    • Calculation:
    • 0.2imes20imes50extμg/mL=200extμg/mL0.2 imes 20 imes 50 ext{μg/mL} = 200 ext{μg/mL}
  • Sample volume: 0.2 mL; thus the total yield:
    • 200extμg/mLimes0.2extmL=40extμg200 ext{μg/mL} imes 0.2 ext{mL} = 40 ext{μg}

Types of RNA

  • Messenger RNA (mRNA): carries genetic information from DNA.
  • Ribosomal RNA (rRNA): component of ribosomes, essential for protein synthesis.
  • Transfer RNA (tRNA): transports amino acids to ribosomes during protein synthesis.
  • Heteronuclear RNA (hnRNA): precursor of mRNA.
  • Small nuclear RNA (snRNA): involved in RNA splicing.
  • Small/micro RNAs: involved in gene regulation and post-transcriptional processing.
  • Representation of RNA structure:
    • 5' -> 3' sequence notation shown in diagram.
  • Example Diagram:
    • 5': AAAAAAAAAA
    • 3': TTTTTTTTT \n
  • Usage of column or bead for RNA extraction.