Study Guide: Atomic Structure and the Periodic Table

Foundations of the Periodic Table

  • Definition and Organization: The Periodic Table is a comprehensive summary of all known elements organized by their Atomic Number. While the numerical order is the primary structure, the table also provides significant information regarding the properties of elements based on their specific placement.

  • Key Information Provided: Every element on the Periodic Table displays standard data points:

    • Atomic Symbol: A shorthand notation for the element name.

    • Atomic Number: This represents the number of Protons in the nucleus. In a neutral atom, this also indicates the total number of Electrons.

    • Relative Atomic Mass: The weighted average mass of the isotopes of an element.

Element Classifications by Region

  • Metals: Located on the left side of the table, metals constitute the vast majority of existing elements and share specific chemical and physical properties.

  • Non-Metals: Found on the right side of the table (including Hydrogen on the far left), these elements share distinct characteristics separate from metals.

  • Metalloids: Situated as a "staircase" between metals and non-metals. This is the smallest family of elements and often exhibits a mix of both metallic and non-metallic properties.

Structural Layout: Groups and Periods

  • Groups: Columns in the Periodic Table. Elements in the same group tend to share similar chemical properties and reactivity (e.g., Lithium, Sodium, and Potassium all react vigorously with water and oxygen).

  • Periods: Rows in the Periodic Table.

  • Important Groups to Recognize:

    • Group 1: Alkali Metals (Li,Na,K,Rb,Cs,FrLi, Na, K, Rb, Cs, Fr).

    • Group 2: Alkaline Earths (Be,Mg,Ca,Sr,Ba,RaBe, Mg, Ca, Sr, Ba, Ra).

    • Transition Metals: Technically Groups 3–15. They are rarely referred to by specific group numbers because their chemical properties are extensively similar throughout the block.

    • Group 17 (or Group 7): Halogens (F,Cl,Br,I,AtF, Cl, Br, I, At).

    • Group 18 (or Group 8): Noble Gases (He,Ne,Ar,Kr,Xe,RnHe, Ne, Ar, Kr, Xe, Rn).

Trends in Atomic Properties and Reactivity

  • Weight vs. Biocompatibility: Light elements are typically essential for life or structural purposes, whereas heavy elements are frequently toxic or radioactive.

  • Valence Electrons and Group Number: For standard groups (excluding Transition Metals), the group number indicates the number of valence electrons. For example, Group 1 elements possess 1 valence electron.

  • Atomic Size (Atomic Radius):

    • Down a Group: Size increases because the number of electron shells increases.

    • Across a Period: Size decreases. This occurs because the nucleus holds its electrons more tightly as the core charge increases.

  • Reactivity Trends:

    • Groups 1 and 2: Reactivity increases as you move down the group.

    • Groups 16 and 17: Reactivity decreases as you move down the group.

Atomic Structure and Subatomic Particles

  • Subatomic Composition: Atoms are comprised of three main particles:

    • Protons: Located in the nucleus; measurable mass; positive charge.

    • Neutrons: Located in the nucleus; measurable mass; no charge (neutral).

    • Electrons: Orbit the nucleus in shells; negligible mass; negative charge.

  • Atomic Number Stability: Elements have a fixed number of protons. If the number of protons changes, a new element is formed.

  • Mass Number: The total sum of Protons and Neutrons in the nucleus.

    • Number of Neutrons=Relative Atomic Mass−Atomic Number\text{Number of Neutrons} = \text{Relative Atomic Mass} - \text{Atomic Number}

Atomic Models and Electron Shells

  • Rutherford Model: Assumed electrons orbit a central nucleus (protons and neutrons) in circular paths. Limitations include its inability to explain light emission or why electrons do not collapse into the nucleus.

  • Bohr Model: States that electrons revolve around the nucleus in specific energy levels or orbits.

    • Electrons can only exist at specific levels, not between them.

    • Orbits further from the nucleus possess higher energy levels.

    • Energy levels become closer to one another as the level number ("n") increases.

  • Flame Tests and Emission Spectra: Elements emit unique light patterns under an emission spectrum. When heat energy is absorbed, electrons jump to a higher energy state; as they return to their normal state, they release energy as light.

  • Shell Capacities: The potential number of electrons per shell is calculated using the formula 2n22n^2.

    • Level 1: Max 2 electrons.

    • Level 2: Max 8 electrons.

    • Level 3: Max 18 electrons.

    • Level 4: Max 32 electrons.

    • Level 5: Max 32 electrons.

    • Level 6: Max 18 electrons.

    • Level 7: Max 8 electrons.

Quantum Mechanical Model (Schrödinger Model)

  • Orbitals: Schrödinger proposed that electrons do not move in circular orbits but exist within regions of probability called orbitals (s,p,d,fs, p, d, f).

  • Subshells and Pauli Exclusion Principle:

    • Each atomic orbital holds a maximum of two electrons.

    • s subshell: 1 orbital (max 2 electrons).

    • p subshell: 3 orbitals (max 6 electrons).

    • d subshell: 5 orbitals (max 10 electrons).

    • f subshell: 7 orbitals (max 14 electrons).

  • Energy Level Summary:

    • Shell 1: ss (2e)

    • Shell 2: s,ps, p (8e)

    • Shell 3: s,p,ds, p, d (18e)

    • Shell 4: s,p,d,fs, p, d, f (32e)

  • Aufbau Principle: Electrons fill subshells from lowest to highest energy.

    • Filling Order (Linus Pauling Diagram): 1s,2s,2p,3s,3p,4s,3d,4p,5s,4d,5p,6s,4f,5d1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p, 5s, 4d, 5p, 6s, 4f, 5d.

    • Note: The 4s4s subshell fills before 3d3d because it is lower in energy.

  • The d4d^4 and d9d^9 Rule: In Groups 6 and 11, atoms achieve stability by moving an electron from the ss orbital to half-fill (d5d^5) or fully fill (d10d^{10}) the dd orbital.

    • Example: Copper (CuCu) configuration is 1s22s22p63s23p64s13d101s^2 2s^2 2p^6 3s^2 3p^6 4s^1 3d^{10}.

Isotopes and Relative Atomic Mass (RAM)

  • Isotopes: Atoms of the same element with the same number of protons but different numbers of neutrons. For example: 6Li^6Li and 7Li^7Li.

  • Calculating RAM: Accounting for the abundance of every isotope.

    • R. A. M=(Abundance1×Atomic Mass1)+(Abundance2×Atomic Mass2)100\text{R. A. M} = \frac{(\text{Abundance}_1 \times \text{Atomic Mass}_1) + (\text{Abundance}_2 \times \text{Atomic Mass}_2)}{100}

    • Lithium Example: 92.41%92.41\% abundance of 7Li^7Li and 7.59%7.59\% abundance of 6Li^6Li results in a RAM of 6.9416.941.

  • Real-World Application: Carbon-14 (14C^{14}C) isotopes were used to date Ötzi the "Iceman" to approximately 5,000 years ago.

Periodicity and Advanced Trends

  • Core Charge: The net positive charge experienced by valence electrons.

    • Core Charge=Number of Protons−Number of Inner Electrons\text{Core Charge} = \text{Number of Protons} - \text{Number of Inner Electrons}

    • The core charge is numerically equal to the number of valence electrons.

  • First Ionization Energy: The energy required to remove an electron from a gaseous atom to form a +1+1 cation.

    • Across a Period: Increases (electrons held tighter).

    • Down a Group: Decreases (electrons are further away).

  • Electronegativity and Electron Affinity:

    • Electronegativity: Ability of an atom to attract electrons in a bond. Noble gases are excluded from this measurement.

    • Electron Affinity: Energy released when an electron is gained.

    • Trend: Both increase toward the top-right of the table.

Chemical Bonding Models

  • The Octet Rule: Elements seek stability by obtaining 8 electrons in their valence shell (except Helium, which is stable with 2).

  • Ionic Bonding: Occurs between metals and non-metals through electron transfer, creating cations (++, metal) and anions (––, non-metal).

    • Properties: Water soluble, high melting point, brittle, and electrically conductive when aqueous.

    • Ionic Formulas: Utilize the "swap and drop" method of valencies. Proportional charges are simplified (e.g., Ca2+O2−→CaOCa^{2+} O^{2-} \rightarrow CaO).

  • Metallic Bonding: Occurs between metal atoms. Metal atoms lose their valence electrons to form a lattice of cations surrounded by a "sea" of delocalised electrons.

    • Properties: Conductivity (heat/electricity) due to free-moving electrons; malleable and ductile due to layers of cations that can slide while remaining attracted to the electron sea; lustrous because free electrons reflect light.

    • Limitations: The model does not fully explain magnetic properties or specific differences in melting temperatures between different metals.

  • Covalent Bonding: Occurs between non-metals through the sharing of electron pairs.

    • Lewis Diagrams (Dot Diagrams): Represent valence electrons only. Shared pairs are bonding pairs; unshared pairs are "lone pairs."

    • Dipoles: Differences in electronegativity cause electrons to be pulled closer to one nucleus, creating partial charges (dipoles).

    • Intermolecular vs. Intramolecular: Intramolecular forces hold the atom together within the molecule; intermolecular forces hold separate molecules to each other, determining boiling and melting points.

Questions & Discussion

  • Atomic Structure Grouping Task:

    • Identify the family of Selenium (Halogen/Group 16 relative), Neon (Noble Gas), and Lithium (Alkali Metal).

    • Calculate neutrons for Ba−138Ba-138: 138−56=82138 - 56 = 82 neutrons.

  • Valence Shell Electron Counts:

    • Rb:1Rb: 1; Al:3Al: 3; F:7F: 7; P:5P: 5; Kr:8Kr: 8.

    • Element chemically similar to Carbon: Silicon (SiSi).

  • Schrödinger/Bohr Comparison:

    • Draw the Bohr model for Chlorine showing shell notation: 2,8,72, 8, 7.

    • Identify Chlorine subshell configuration: 1s22s22p63s23p51s^2 2s^2 2p^6 3s^2 3p^5.

  • Bonding Scenarios:

    • Ionic formula for Aluminum Sulphate: Al2(SO4)3Al_2(SO_4)_3.

    • Cation formation reactions: Na→Na++e−Na \rightarrow Na^+ + e^-.

    • Lewis diagram for Nitrogen (N2N_2): Triple covalent bond with one lone pair on each Nitrogen atom.

  • Periodic Table Trends Check:

    • Which is more reactive: CuCu or AuAu? (CuCu).

    • Which has a smaller radius: NaNa or MgMg? (MgMg).

    • Which is higher electronegativity: OO or FF? (FF).