Comprehensive Study Notes on Atomic Structure, Periodic Trends, and Ionization Energy

Fundamental Particles and Atomic Structure

  • Subatomic Particles and Their Properties:

    • Proton: Located in the nucleus; relative mass of 11; relative electric charge of +1+1.

    • Neutron: Located in the nucleus; relative mass of 11 (or approximately 1.0081.008); relative electric charge of 00.

    • Electron: Located in orbitals surrounding the nucleus; relative mass of approximately 11836\frac{1}{1836} (commonly approximated as 11840\frac{1}{1840} or 0.000550.00055); relative electric charge of −1-1.

  • Behavior of Fundamental Particles in an Electric Field:

    • When a collimated beam containing protons, neutrons, and electrons travelling at the same velocity passes between two oppositely charged parallel plates:

      • Electrons (Particle A): Possess a negative charge and deflect toward the positive (anode) plate. Because the mass of an electron is extremely small relative to its charge, it exhibits a very high charge-to-mass ratio (em\frac{e}{m}), resulting in a large angle of deflection.

      • Neutrons (Particle B): Carry zero electric charge and travel straight through the field without any deflection.

      • Protons (Particle C): Possess a positive charge and deflect toward the negative (cathode) plate. Because a proton has a substantially greater mass than an electron (∼1836\sim 1836 times heavier), its charge-to-mass ratio is significantly lower, resulting in a noticeably smaller angle of deflection in the opposite direction.


Deflection of fundamental particles in an electric field
  • Evolution of Atomic Models: Orbits versus Orbitals:

    • Classical Bohr Model: Envisioned electrons revolving around the central nucleus in well-defined, planar, circular paths called orbits.


Bohr model of the atom showing subatomic particles
  • Quantum Mechanics and Heisenberg's Uncertainty Principle: Disproved the classical planar orbit concept by stating that it is impossible to simultaneously determine both the exact position and momentum of an electron.

  • Atomic Orbital Definition: A three-dimensional region of space around the nucleus where there is a maximum probability (typically greater than 95%95\%) of finding an electron.

  • Nodes: Specific points or planes where the probability of finding an electron is zero. An increase in the number of nodes correlates directly with higher orbital energy.

Isotopes and Relative Atomic Mass

  • Definitions:

    • Isotopes: Atoms of the same chemical element having the same number of protons (same atomic number, ZZ), but different numbers of neutrons (different mass or nucleon number, AA). Isotopes possess identical chemical properties due to having the same electron configuration, but exhibit differing physical properties (e.g., density, boiling point, mass).

    • Relative Atomic Mass (ArA_r): The weighted average mass of an atom of an element compared to 112th\frac{1}{12}\text{th} of the mass of an atom of carbon-12 (12C{}^{12}\text{C}).

  • Determination of Subatomic Composition in Isotopes and Ions:

    • Proton number (ZZ) defines the element.

    • Neutron number is calculated as Nucleon Number (A)−Proton Number (Z)\text{Nucleon Number } (A) - \text{Proton Number } (Z).

    • Electron number in a neutral atom equals the proton number. In a cation, electrons equal Z−chargeZ - \text{charge}; in an anion, electrons equal Z+∣charge∣Z + |\text{charge}|.

    • Radium-226 (88226Ra{}^{226}_{88}\text{Ra}):

      • Protons: 8888

      • Neutrons: 226−88=138226 - 88 = 138

      • Electrons: 8888

    • Uranium-238 (92238U{}^{238}_{92}\text{U}):

      • Protons: 9292

      • Neutrons: 238−92=146238 - 92 = 146

      • Electrons: 9292

      • 226Ra{}^{226}\text{Ra} is formed through the radioactive decay of 238U{}^{238}\text{U}.

  • Calculations of Relative Atomic Mass from Abundance Data:

    • Sample 1: Iron (Fe\text{Fe})

      • Isotopic mass-to-charge (m/zm/z) ratios and abundances: 5454 (5.8%5.8\%), 5656 (91.6%91.6\%), and 5757 (2.6%2.6\%).

      • Formula:             Ar=∑(mass×% abundance)100A_r = \frac{\sum (\text{mass} \times \%\,\text{abundance})}{100}

      • Calculation:             Ar(Fe)=(54×5.8)+(56×91.6)+(57×2.6)100=313.2+5129.6+148.2100=5591.0100=55.9A_r(\text{Fe}) = \frac{(54 \times 5.8) + (56 \times 91.6) + (57 \times 2.6)}{100} = \frac{313.2 + 5129.6 + 148.2}{100} = \frac{5591.0}{100} = 55.9

      • The relative atomic mass of this sample of iron to one decimal place is 55.955.9.

    • Sample 2: Magnesium (Mg\text{Mg})

      • Isotopic masses and abundances: 2424 (78.60%78.60\%), 2525 (10.11%10.11\%), and 2626 (11.29%11.29\%).

      • Calculation to four significant figures:             Ar(Mg)=(24×78.60)+(25×10.11)+(26×11.29)100=1886.4+252.75+293.54100=2432.69100=24.33A_r(\text{Mg}) = \frac{(24 \times 78.60) + (25 \times 10.11) + (26 \times 11.29)}{100} = \frac{1886.4 + 252.75 + 293.54}{100} = \frac{2432.69}{100} = 24.33

      • The relative atomic mass of magnesium to four significant figures is 24.3324.33.

Shells, Sub-shells, and Orbitals

  • Principal Quantum Shells (nn):

    • Shell n=1n = 1: Contains the 1s1s sub-shell (11 orbital; holds up to 22 electrons).

    • Shell n=2n = 2: Contains 2s2s and 2p2p sub-shells (1+3=41 + 3 = 4 orbitals; holds up to 88 electrons).

    • Shell n=3n = 3: Contains 3s3s, 3p3p, and 3d3d sub-shells (1+3+5=91 + 3 + 5 = 9 orbitals; holds up to 1818 electrons).

    • Shell n=4n = 4: Contains 4s4s, 4p4p, 4d4d, and 4f4f sub-shells (1+3+5+7=161 + 3 + 5 + 7 = 16 orbitals; holds up to 3232 electrons).

  • Nomenclature and Electron Capacity of Sub-shells:

    • ss orbital: Derived from sharp. Comprises 11 orbital per sub-shell; holds a maximum of 22 electrons.

    • pp orbital: Derived from principle. Comprises 33 degenerate orbitals (px,py,pzp_x, p_y, p_z) per sub-shell; holds a maximum of 66 electrons.

    • dd orbital: Derived from diffused. Comprises 55 degenerate orbitals per sub-shell; holds a maximum of 1010 electrons.

    • ff orbital: Derived from fundamental. Comprises 77 degenerate orbitals per sub-shell; holds a maximum of 1414 electrons.

  • Shapes of Atomic Orbitals:

    • ss Orbital: Spherically symmetrical around the nucleus with only one spatial orientation.

    • pp Orbitals: Dumbbell-shaped with two distinct lobes oriented along mutually perpendicular Cartesian axes. Consists of three directional orientations: pxp_x (along the xx-axis), pyp_y (along the yy-axis), and pzp_z (along the zz-axis). Each pp orbital features a nodal plane passing directly through the nucleus where electron probability is zero.


Shapes and orientations of s and p orbitals with nodal planes

Electronic Configuration Rules and Conventions

  • Core Principles of Orbital Filling:

    • Aufbau Principle: Orbitals of lowest energy are occupied first before electrons enter higher energy levels.

    • Energy Order of Orbitals:         1s<2s<2p<3s<3p<4s<3d<4p<5s<4d<5p<6s<4f<5d<6p<7s1s < 2s < 2p < 3s < 3p < 4s < 3d < 4p < 5s < 4d < 5p < 6s < 4f < 5d < 6p < 7s

    • Notice that the 4s4s sub-shell lies lower in energy than the 3d3d sub-shell and fills before 3d3d.


Energy ordering of atomic orbitals from 1s to 4p


Aufbau principle diagonal filling rule
  • Pauli Exclusion Principle: An orbital can hold a maximum of two electrons, and they must have opposite spins (represented by upward and downward pointing arrows: ↿⇂\upharpoonleft\downharpoonright).

  • Hund's Rule: In degenerate orbitals of equal energy (such as the three pp orbitals), electrons occupy each orbital singly with parallel spins before any pairing occurs. This minimizes inter-electronic repulsion.


Orbital box representation of Nitrogen and Oxygen showing spin pairing
  • Notational Systems:

    • Full Electronic Configuration: Lists every occupied sub-shell with a superscript denoting the electron count (e.g., 1s2 2s2 2p6…1s^2\,2s^2\,2p^6\dots).

    • Noble Gas / Abbreviated Notation: Represents inner filled shells using the bracketed symbol of the preceding noble gas (e.g., [He][\text{He}], [Ne][\text{Ne}], [Ar][\text{Ar}], [Rn][\text{Rn}]).

    • Orbital / Box Form: Visualizes individual orbitals as boxes and electrons as arrows indicating spin direction.

  • Electronic Configurations of Neutral Atoms:

    • Helium (Z=2Z = 2): 1s21s^2

    • Lithium (Z=3Z = 3): 1s2 2s11s^2\,2s^1 or [He] 2s1[\text{He}]\,2s^1

    • Beryllium (Z=4Z = 4): 1s2 2s21s^2\,2s^2 or [He] 2s2[\text{He}]\,2s^2

    • Boron (Z=5Z = 5): 1s2 2s2 2p11s^2\,2s^2\,2p^1 or [He] 2s2 2p1[\text{He}]\,2s^2\,2p^1

    • Carbon (Z=6Z = 6): 1s2 2s2 2p21s^2\,2s^2\,2p^2

    • Nitrogen (Z=7Z = 7): 1s2 2s2 2p31s^2\,2s^2\,2p^3 (contains 3 unpaired electrons in 2p2p)

    • Oxygen (Z=8Z = 8): 1s2 2s2 2p41s^2\,2s^2\,2p^4 (contains 1 pair of electrons and 2 unpaired electrons in 2p2p)

    • Sodium (Z=11Z = 11): 1s2 2s2 2p6 3s11s^2\,2s^2\,2p^6\,3s^1 or [Ne] 3s1[\text{Ne}]\,3s^1

    • Aluminium (Z=13Z = 13): 1s2 2s2 2p6 3s2 3p11s^2\,2s^2\,2p^6\,3s^2\,3p^1 or [Ne] 3s2 3p1[\text{Ne}]\,3s^2\,3p^1

    • Sulfur (Z=16Z = 16): 1s2 2s2 2p6 3s2 3p41s^2\,2s^2\,2p^6\,3s^2\,3p^4 or [Ne] 3s2 3p4[\text{Ne}]\,3s^2\,3p^4

    • Chlorine (Z=17Z = 17): 1s2 2s2 2p6 3s2 3p51s^2\,2s^2\,2p^6\,3s^2\,3p^5 or [Ne] 3s2 3p5[\text{Ne}]\,3s^2\,3p^5

    • Argon (Z=18Z = 18): 1s2 2s2 2p6 3s2 3p61s^2\,2s^2\,2p^6\,3s^2\,3p^6

    • Potassium (Z=19Z = 19): 1s2 2s2 2p6 3s2 3p6 4s11s^2\,2s^2\,2p^6\,3s^2\,3p^6\,4s^1 or [Ar] 4s1[\text{Ar}]\,4s^1

    • Calcium (Z=20Z = 20): 1s2 2s2 2p6 3s2 3p6 4s21s^2\,2s^2\,2p^6\,3s^2\,3p^6\,4s^2 or [Ar] 4s2[\text{Ar}]\,4s^2

    • Scandium (Z=21Z = 21):

      • Full configuration: 1s2 2s2 2p6 3s2 3p6 3d1 4s21s^2\,2s^2\,2p^6\,3s^2\,3p^6\,3d^1\,4s^2

      • Argon notation: [Ar] 3d1 4s2[\text{Ar}]\,3d^1\,4s^2

    • Titanium (Z=22Z = 22): 1s2 2s2 2p6 3s2 3p6 3d2 4s21s^2\,2s^2\,2p^6\,3s^2\,3p^6\,3d^2\,4s^2

    • Vanadium (Z=23Z = 23): 1s2 2s2 2p6 3s2 3p6 3d3 4s21s^2\,2s^2\,2p^6\,3s^2\,3p^6\,3d^3\,4s^2

    • Zinc (Z=30Z = 30): 1s2 2s2 2p6 3s2 3p6 3d10 4s21s^2\,2s^2\,2p^6\,3s^2\,3p^6\,3d^{10}\,4s^2

    • Bromine (Z=35Z = 35): 1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p51s^2\,2s^2\,2p^6\,3s^2\,3p^6\,3d^{10}\,4s^2\,4p^5

    • Uranium (Z=92Z = 92): [Rn] 5f3 6d1 7s2[\text{Rn}]\,5f^3\,6d^1\,7s^2

  • Electronic Configurations of Ions:

    • When cations form, electrons are removed first from the outermost shell (for transition elements, the 4s4s electrons are removed before 3d3d electrons).

    • When anions form, electrons are added to the lowest available unoccupied or half-filled orbital.

    • Lithium ion (Li+\text{Li}^+, Z=3Z = 3): 1s21s^2

    • Fluoride ion (F−\text{F}^-, Z=9Z = 9): 1s2 2s2 2p61s^2\,2s^2\,2p^6

    • Oxide ion (O2−\text{O}^{2-}, Z=8Z = 8): 1s2 2s2 2p61s^2\,2s^2\,2p^6

    • Nitride ion (N3−\text{N}^{3-}, Z=7Z = 7): 1s2 2s2 2p61s^2\,2s^2\,2p^6

    • Aluminium ion (Al3+\text{Al}^{3+}, Z=13Z = 13): 1s2 2s2 2p61s^2\,2s^2\,2p^6

    • Sulfide ion (S2−\text{S}^{2-}, Z=16Z = 16): 1s2 2s2 2p6 3s2 3p61s^2\,2s^2\,2p^6\,3s^2\,3p^6

    • Calcium ion (Ca2+\text{Ca}^{2+}, Z=20Z = 20): 1s2 2s2 2p6 3s2 3p61s^2\,2s^2\,2p^6\,3s^2\,3p^6

    • Chromium(VI) ion (Cr6+\text{Cr}^{6+}, Z=24Z = 24): Neutral is [Ar] 3d5 4s1[\text{Ar}]\,3d^5\,4s^1; losing 6 electrons gives 1s2 2s2 2p6 3s2 3p61s^2\,2s^2\,2p^6\,3s^2\,3p^6 ([Ar][\text{Ar}]).

    • Manganese(VII) ion (Mn7+\text{Mn}^{7+}, Z=25Z = 25): Neutral is [Ar] 3d5 4s2[\text{Ar}]\,3d^5\,4s^2; losing 7 electrons gives 1s2 2s2 2p6 3s2 3p61s^2\,2s^2\,2p^6\,3s^2\,3p^6 ([Ar][\text{Ar}]).

Periodic Trends in Atomic and Ionic Radii

  • Atomic Radius Definition: The distance between the nucleus and the loosely bonded outermost valence electron.


Periodic variation in atomic radius across periods and down groups
  • Trend Across a Period (Left to Right):

    • Atomic radius decreases across a period (e.g., across Period 3 from Na\text{Na} to Cl\text{Cl}).

    • Mechanism: The number of occupied principal energy shells remains constant, which keeps inner-shell electron shielding approximately the same. However, the proton number increases, steadily increasing the nuclear charge. This creates a stronger electrostatic pull on the outermost shell electrons, pulling them closer to the nucleus and causing atomic size to contract.

    • Comparison: In Period 3, Sodium (Na\text{Na}) has the largest atomic radius (Na>Mg>Al>Si>P>S>Cl>Ar\text{Na} > \text{Mg} > \text{Al} > \text{Si} > \text{P} > \text{S} > \text{Cl} > \text{Ar}).

  • Trend Down a Group (Top to Bottom):

    • Atomic radius increases down a group.

    • Mechanism: Successive energy shells are added down the group, increasing the physical distance between the nucleus and the valence electrons. Inner electron shells also increase shielding, overriding the increase in nuclear charge and reducing the net electrostatic attraction felt by outer electrons.

    • Example: The atomic radius of potassium (K\text{K}) is larger than that of sodium (Na\text{Na}) because potassium has four occupied electron shells whereas sodium has only three.

  • Ionic Radii Variations:

    • Cations are smaller than their neutral atoms: Loss of valence electrons often results in the loss of the outermost shell. Furthermore, the remaining electron cloud experiences less electron-electron repulsion and experiences a greater effective nuclear pull per electron.

    • Anions are larger than their neutral atoms: Gaining electrons into the valence shell increases inter-electronic repulsion, causing the electron cloud to expand while the nuclear charge remains constant.

    • Isoelectronic Series Comparison: In a series of ions sharing the identical electron configuration (1s21s^2 or 1s2 2s2 2p61s^2\,2s^2\,2p^6), radius decreases as nuclear charge (ZZ) increases:         Be2+<Li+<F−<O2−\text{Be}^{2+} < \text{Li}^+ < \text{F}^- < \text{O}^{2-}

      • Be2+\text{Be}^{2+} (Z=4Z = 4, 2 e−2\,e^-) and Li+\text{Li}^+ (Z=3Z = 3, 2 e−2\,e^-) have fewer shells (n=1n = 1) and are smaller than the anions (n=2n = 2).

      • Between the two cations, Be2+\text{Be}^{2+} has more protons pulling on the two electrons, making it smaller than Li+\text{Li}^+.

      • Between the two anions (10 e−10\,e^-), F−\text{F}^- (Z=9Z = 9) exerts a stronger nuclear pull than O2−\text{O}^{2-} (Z=8Z = 8), making O2−\text{O}^{2-} the largest ion in the set.

Fundamental Concepts and Thermochemical Equations of Ionization Energy

  • Definition of First Ionization Energy (IE1IE_1):

    • The energy required to remove one mole of electrons from one mole of gaseous atoms to produce one mole of gaseous ions, each carrying a charge of +1+1.

    • Units: Measured in kJ/mol\text{kJ/mol} or kJ mol−1\text{kJ}\,\text{mol}^{-1}.

  • Equations for First Ionization Energy:

    • General equation:         X(g)→X(g)++e−\text{X}_{(g)} \rightarrow \text{X}^+_{(g)} + e^-

    • Sodium (Na\text{Na}):         Na(g)→Na(g)++e−\text{Na}_{(g)} \rightarrow \text{Na}^+_{(g)} + e^-

    • Aluminium (Al\text{Al}):         Al(g)→Al(g)++e−(IE1=577 kJ mol−1)\text{Al}_{(g)} \rightarrow \text{Al}^+_{(g)} + e^- \quad (IE_1 = 577\,\text{kJ}\,\text{mol}^{-1})

    • Sulfur (S\text{S}):         S(g)→S(g)++e−\text{S}_{(g)} \rightarrow \text{S}^+_{(g)} + e^-

  • Equations for Subsequent Ionization Energies:

    • Second Ionization Energy (IE2IE_2): The energy required to remove one mole of electrons from one mole of gaseous 1+1+ ions to produce one mole of gaseous 2+2+ ions.

      • General equation:             X(g)+→X(g)2++e−\text{X}^+_{(g)} \rightarrow \text{X}^{2+}_{(g)} + e^-

      • Calcium (Ca\text{Ca}):             Ca(g)+→Ca(g)2++e−\text{Ca}^+_{(g)} \rightarrow \text{Ca}^{2+}_{(g)} + e^-

      • Aluminium (Al\text{Al}):             Al(g)+→Al(g)2++e−(IE2=1820 kJ mol−1)\text{Al}^+_{(g)} \rightarrow \text{Al}^{2+}_{(g)} + e^- \quad (IE_2 = 1820\,\text{kJ}\,\text{mol}^{-1})

    • Third Ionization Energy (IE3IE_3): The energy required to remove one mole of electrons from one mole of gaseous 2+2+ ions to form one mole of gaseous 3+3+ ions.

      • Aluminium (Al\text{Al}):             Al(g)2+→Al(g)3++e−(IE3=2740 kJ mol−1)\text{Al}^{2+}_{(g)} \rightarrow \text{Al}^{3+}_{(g)} + e^- \quad (IE_3 = 2740\,\text{kJ}\,\text{mol}^{-1})

      • Potassium (K\text{K}):             K(g)2+→K(g)3++e−\text{K}^{2+}_{(g)} \rightarrow \text{K}^{3+}_{(g)} + e^-

Factors Influencing Ionization Energy

  • 1. Atomic Radius (Atomic Size):

    • As atomic radius increases, the distance between the nucleus and the outermost valence electron increases.

    • Electrostatic force of attraction follows an inverse-square law; greater distance weakens the nuclear hold on the valence electron.

    • Result: Larger atomic size leads to a lower ionization energy.

  • 2. Nuclear Charge:

    • Nuclear charge is determined by the total number of protons in the nucleus.

    • A higher number of protons exerts a stronger electrostatic pull on the surrounding electrons.

    • Result: Holding all else equal, greater nuclear charge leads to a higher ionization energy.

  • 3. Shielding (Screening) Effect:

    • Inner shells of electrons lie between the positively charged nucleus and the outermost valence shell.

    • These core electrons repel the outer electrons, mitigating and reducing the full electrostatic force of the nucleus.

    • Result: Greater shielding lowers effective nuclear attraction, resulting in a lower ionization energy.

  • 4. Spin-Pair Repulsion (Paired versus Unpaired Electrons):

    • Electrons occupying the same atomic orbital share a common region of space and experience mutual electrostatic repulsion.

    • This repulsion elevates the energy of paired electrons, making them easier to remove than unpaired electrons situated alone in degenerate orbitals.

    • Result: Paired electrons require less energy to extract, decreasing ionization energy.

Periodic Trends and Anomalies in First Ionization Energy

  • General Down a Group Trend:

    • First ionization energy decreases down every group (e.g., in Group 1 alkali metals: Li>Na>K>Rb>Cs\text{Li} > \text{Na} > \text{K} > \text{Rb} > \text{Cs}).


First ionization energies down Group 1 alkali metals
*   **Explanation:** Moving down a group, each successive element possesses an additional occupied electron shell. Atomic radius increases substantially and inner-shell shielding increases, weakening the nuclear attraction on the outermost electron despite increasing proton number. Consequently, less energy is needed to remove the valence electron.
  • General Across a Period Trend:

    • First ionization energy generally increases from left to right across any period (e.g., from Li\text{Li} to Ne\text{Ne} in Period 2, and from Na\text{Na} to Ar\text{Ar} in Period 3).


Comparison of first ionization energies across Period 2 and Period 3
  • Explanation: Across a period, electrons are added to the same principal quantum shell, meaning shielding remains largely constant. Nuclear charge increases steadily due to the addition of protons, drawing the valence shell closer to the nucleus. The resulting higher effective nuclear attraction requires more energy to eject an electron.

  • Noble gases (He\text{He}, Ne\text{Ne}, Ar\text{Ar}) exhibit the highest ionization energies within their respective periods due to having the smallest atomic radii, highest nuclear charges, and complete stable sub-shells.


First ionization energy versus atomic number for elements 1 to 20
  • Discontinuity between Group 2 and Group 13 (s\text{s} to p\text{p} Sub-shell Transition):

    • Beryllium (Be\text{Be}) versus Boron (B\text{B}): Boron (Z=5Z = 5) has a lower first ionization energy than beryllium (Z=4Z = 4).

      • Be:1s2 2s2\text{Be}: 1s^2\,2s^2

      • B:1s2 2s2 2p1\text{B}: 1s^2\,2s^2\,2p^1

      • Explanation: The outermost electron of boron occupies the 2p2p sub-shell, which is at a higher energy level and further from the nucleus than the 2s2s sub-shell of beryllium. The 2p2p electron also experiences additional shielding from the inner 2s22s^2 electrons, requiring less energy to be removed.

    • Magnesium (Mg\text{Mg}) versus Aluminium (Al\text{Al}): Magnesium (Z=12Z = 12) has a higher first ionization energy than aluminium (Z=13Z = 13).

      • Mg:1s2 2s2 2p6 3s2\text{Mg}: 1s^2\,2s^2\,2p^6\,3s^2

      • Al:1s2 2s2 2p6 3s2 3p1\text{Al}: 1s^2\,2s^2\,2p^6\,3s^2\,3p^1

      • Explanation: In aluminium, the valence electron is in the higher-energy 3p3p sub-shell, shielded by the full 3s23s^2 sub-shell as well as inner core shells. In magnesium, the electron is removed from the lower-energy, fully filled, stable 3s3s sub-shell.

  • Discontinuity between Group 15 and Group 16 (Spin-Pair Repulsion):

    • Nitrogen (N\text{N}) versus Oxygen (O\text{O}): Nitrogen (Z=7Z = 7) has a higher first ionization energy than oxygen (Z=8Z = 8).

      • N:1s2 2s2 2p3\text{N}: 1s^2\,2s^2\,2p^3 (three singly occupied 2p2p orbitals)

      • O:1s2 2s2 2p4\text{O}: 1s^2\,2s^2\,2p^4 (one doubly occupied 2p2p orbital and two singly occupied 2p2p orbitals)

      • Explanation: In oxygen, two electrons share the same 2px2p_x orbital. The mutual electrostatic spin-pair repulsion between these paired electrons makes it easier to remove one of them compared to nitrogen, where each 2p2p orbital contains only a single, unshared electron.

    • The same drop occurs between Phosphorus (3p33p^3) and Sulfur (3p43p^4) in Period 3.

  • Group 14 (Group IV) Ionization Energy Trend:

    • Experimental first ionization energy values:

      • Carbon (C\text{C}): 1090 kJ mol−11090\,\text{kJ}\,\text{mol}^{-1}

      • Silicon (Si\text{Si}): 786 kJ mol−1786\,\text{kJ}\,\text{mol}^{-1}

      • Germanium (Ge\text{Ge}): 762 kJ mol−1762\,\text{kJ}\,\text{mol}^{-1}

      • Tin (Sn\text{Sn}): 707 kJ mol−1707\,\text{kJ}\,\text{mol}^{-1}

      • Lead (Pb\text{Pb}): 716 kJ mol−1716\,\text{kJ}\,\text{mol}^{-1}

    • Structural Explanation: From C\text{C} down to Sn\text{Sn}, the first ionization energy decreases progressively as extra principal quantum shells are added, increasing atomic size and shielding. Between tin (Sn\text{Sn}) and lead (Pb\text{Pb}), the trend experiences a slight increase (707 kJ mol−1707\,\text{kJ}\,\text{mol}^{-1} to 716 kJ mol−1716\,\text{kJ}\,\text{mol}^{-1}). This anomaly occurs because lead has filled 4f4f orbitals (14 electrons); the diffuse shape of ff orbitals provides very poor screening, causing an unusually large effective nuclear charge that holds the outer electrons more tightly.

Successive Ionization Energies and Determining Electron Configurations

  • Patterns in Successive Ionization Energies:

    • For any given atom, successive ionization energies always increase (IE1<IE2<IE3<…IE_1 < IE_2 < IE_3 < \dots).

    • Reason: With each electron removed, the ion becomes progressively more positive. The ratio of protons to electrons increases, resulting in a contracted ionic radius and greater electrostatic pull on the remaining electrons.

    • Identifying Major Energy Jumps: A moderate increase in successive ionization energy indicates removal of electrons from the same sub-shell or principal energy shell. A sudden, massive jump indicates that an electron is being removed from a new, inner principal quantum shell located much closer to the nucleus with drastically less shielding.

  • Diagnostic Case Studies:

    • Case 1: Boron (B\text{B})

      • Successive ionization energies: 801801, 24272427, 36603660, 2502625026, 32827 kJ mol−132827\,\text{kJ}\,\text{mol}^{-1}.

      • Analysis: The enormous jump occurs between the 3rd (3660 kJ mol−13660\,\text{kJ}\,\text{mol}^{-1}) and 4th (25026 kJ mol−125026\,\text{kJ}\,\text{mol}^{-1}) values. This indicates that 3 electrons are easily removed from the valence shell (n=2n = 2) before entering the inner core shell (n=1n = 1). This places the element in Group 13 (Group 3). Since it has five total ionization energies, it possesses five electrons, identifying it as boron.

    • Case 2: Period 3 Unknown Element

      • Data: IE1=786IE_1 = 786, IE2=1580IE_2 = 1580, IE3=3230IE_3 = 3230, IE4=4360IE_4 = 4360, IE5=16100IE_5 = 16100, IE6=19800 kJ mol−1IE_6 = 19800\,\text{kJ}\,\text{mol}^{-1}.

      • Analysis: The dramatic jump occurs between the 4th (4360 kJ mol−14360\,\text{kJ}\,\text{mol}^{-1}) and 5th (16100 kJ mol−116100\,\text{kJ}\,\text{mol}^{-1}) ionization energies. This indicates 4 valence electrons in the outer shell. Since the element is in Period 3, it belongs to Group 14 (Group IV), identifying it as Silicon (Si\text{Si}).

    • Case 3: Unknown Element X

      • Data: IE1=950IE_1 = 950, IE2=1800IE_2 = 1800, IE3=2700IE_3 = 2700, IE4=4800IE_4 = 4800, IE5=6000IE_5 = 6000, IE6=12300 kJ mol−1IE_6 = 12300\,\text{kJ}\,\text{mol}^{-1}.

      • Analysis: A substantial increase occurs between the 5th (6000 kJ mol−16000\,\text{kJ}\,\text{mol}^{-1}) and 6th (12300 kJ mol−112300\,\text{kJ}\,\text{mol}^{-1}) ionization energies. This proves that 5 electrons are present in the outer shell, placing Element X into Group 15 (Group 5 / Group V).

    • Case 4: Highest Second Ionization Energy in Period 3

      • Sodium (Na\text{Na}) has the highest second ionization energy among all Period 3 elements (Na\text{Na} to Ar\text{Ar}).

      • Explanation: Neutral sodium has configuration 1s2 2s2 2p6 3s11s^2\,2s^2\,2p^6\,3s^1. Removing the first electron leaves Na+\text{Na}^+ with the complete, stable neon-like core configuration 1s2 2s2 2p61s^2\,2s^2\,2p^6. The second electron must be extracted from the tightly held, inner 2p2p sub-shell, which experiences much lower shielding and a higher effective nuclear charge compared to valence electrons of other Period 3 cations.

      • Reaction: Na(g)+→Na(g)2++e−\text{Na}^+_{(g)} \rightarrow \text{Na}^{2+}_{(g)} + e^-

Periodic Table Organization and Group Classifications

  • Historical Foundation:

    • The modern periodic table is derived directly from the table proposed in 1869 by Dmitri Mendeleev, who organized elements according to recurring periodic relationships in their physical and chemical properties.

  • Locating Elements by Group and Period:

    • Group 1, Period 4: Potassium (K\text{K})

    • Group 13, Period 3: Aluminium (Al\text{Al})

    • Group 16, Period 3: Sulfur (S\text{S})

    • Group 2, Period 6: Barium (Ba\text{Ba})

  • Chemical Families and Elemental Symbols:

    • Alkali Metals (Group 1): Li\text{Li}, Na\text{Na}, K\text{K}, Rb\text{Rb}, Cs\text{Cs}, Fr\text{Fr}

    • Alkaline Earth Metals (Group 2): Be\text{Be}, Mg\text{Mg}, Ca\text{Ca}, Sr\text{Sr}, Ba\text{Ba}, Ra\text{Ra}

    • Halogens (Group 17 / Group VII): F\text{F}, Cl\text{Cl}, Br\text{Br}, I\text{I}, At\text{At}

    • Noble Gases (Group 18 / Group 0): He\text{He}, Ne\text{Ne}, Ar\text{Ar}, Kr\text{Kr}, Xe\text{Xe}, Rn\text{Rn}

  • Periodic Group Principles:

    • Elements in the same group possess the same number of valence electrons, leading to similar chemical reactions and properties.

    • Elements in the same group possess different mass numbers and different proton numbers (atomic numbers) due to increasing numbers of filled principal shells.