Technology, Production, Costs, and Perfectly Competitive Markets

Technology, Production, and Costs

  • Theory of the Firm & Costs:

    • Economic analysis assumes that firms act rationally to maximize profits.

    • Rational decision-making and profit maximization require a precise and thorough understanding of production costs.

    • Profits (Profit\text{Profit}) are defined as total revenue (TRTR) minus total cost (TCTC):

Profit=TR−TC\text{Profit} = TR - TC

  • Technology and Technological Change:

    • Technology (Economic Definition): The processes a firm uses to turn inputs into outputs of goods and services. It is the mechanism that enables the transformation of inputs (raw materials) into desired outputs through a specific process.

    • Technological Change: A change in the ability of a firm to produce output with a given quantity of inputs.

    • Nature of Technological Change: Generally speaking, technological change is always positive. It enables a firm to either:

    • Produce more output using the same level of inputs as before.

    • Produce the same level of output using a lower level of inputs than before.

  • Short Run vs. Long Run Horizons:

    • Short Run: The period of time during which at least one of the firm's inputs is fixed. During this period, at least one factor of production cannot be varied, meaning some costs are fixed.

    • Example: If demand for pizzas increases beyond capacity at Domino's, the firm cannot instantly increase pizza production overnight due to physical constraints (e.g., a limited number of ovens and machines).

    • Long Run: A period of time long enough to allow a firm to vary all of its inputs, adopt new technology, and increase or decrease the size of its physical plant.

    • In the long run, all factors of production are variable, meaning there are no fixed costs.

    • Variation Across Industries: The actual calendar time required for the short run or long run varies across industries. For instance, agricultural products typically have longer short-run periods than service or technology businesses.

  • Classification of Costs:

    • Total Cost (TCTC): The cost of all the inputs a firm uses in production. It equals fixed costs plus variable costs:

TC=FC+VCTC = FC + VC

  • Fixed Costs (FCFC): Costs that remain constant as the quantity of output changes. Fixed costs are incurred even if output is zero.

  • Variable Costs (VCVC): Costs that change as the quantity of output changes. Variable costs initially increase at a decreasing rate due to increasing returns to scale/marginal productivity, but later increase at an increasing rate due to decreasing returns.

    • Explicit vs. Implicit Costs & Profit Definitions:

  • Opportunity Cost: The highest-valued alternative that must be given up to engage in an activity (the next best alternative foregone).

  • Explicit Cost: A cost that involves spending money (direct, tangible monetary payments).

  • Implicit Cost: A non-monetary opportunity cost (indirect cost).

  • Accounting Profit: Considers only explicit costs:

Accounting Profit=Total Revenue−Explicit Costs\text{Accounting Profit} = \text{Total Revenue} - \text{Explicit Costs}

  • Economic Profit: Considers both explicit and implicit costs:

Economic Profit=Total Revenue−(Explicit Costs+Implicit Costs)\text{Economic Profit} = \text{Total Revenue} - (\text{Explicit Costs} + \text{Implicit Costs})

  • Detailed Breakdown of Annual Costs (Julie Johnson's Photocopying Store - Table 6.1):

    • Explicit Costs (Direct Monetary Payments):

      • Paper

      • Wages

      • Lease payment for photocopier machines

      • Electricity

      • Lease payment for store

    • Implicit Costs (Non-Monetary Opportunity Costs):

      • Foregone salary

      • Foregone interest

      • Economic depreciation

    • The Production Function:

  • Definition: The relationship between the inputs employed by the firm and the maximum output it can produce with those inputs. It represents the technological relationship between physical quantities of inputs and physical quantities of output.

  • Canonical Examples of Production Functions:

    • Cobb-Douglas production function

    • Leontief production function (Fixed Proportions)

    • Constant Elasticity of Substitution (CES) production function

    • Short-Run Production and Cost Mechanics (Julie Johnson's Store Case Study):

  • Production Setup: Fixed input of 2 copying machines with a total fixed cost (FCFC) of $30\$30 per day. Variable input is quantity of workers (LL), where each worker costs $50\$50 per day.

  • Product Curves Concepts:

    • Marginal Product of Labour (MPLMP_L): The additional output a firm produces as a result of hiring one more unit of labour. "Marginal" denotes additional contribution:

MPL=ΔQΔLMP_L = \frac{\Delta Q}{\Delta L}

- Average Product of Labour (APLAP_L): Output produced per unit of variable labor input:

APL=QLAP_L = \frac{Q}{L}

- Law of Diminishing Returns: The principle that, at some point, adding more of a variable input (such as labour) to the same amount of a fixed input (such as capital equipment) will cause the marginal product of the variable input to decline. This occurs because added workers have progressively less of the fixed factor to work with. It is strictly a short-run phenomenon.
  • Empirical Data Table (Table 6.2 Breakdown):

    • Workers (L=0L = 0), Machines = 2, Copies (Q=0Q = 0), FC=$30FC = \$30, VC=$0VC = \$0, TC=$30TC = \$30, ATC=UndefinedATC = \text{Undefined}, MPL=N/AMP_L = \text{N/A}, APL=N/AAP_L = \text{N/A}

    • Workers (L=1L = 1), Machines = 2, Copies (Q=625Q = 625), FC=$30FC = \$30, VC=$50VC = \$50, TC=$80TC = \$80, ATC=$0.13ATC = \$0.13, MPL=625MP_L = 625, APL=625.0AP_L = 625.0

    • Workers (L=2L = 2), Machines = 2, Copies (Q=1325Q = 1325), FC=$30FC = \$30, VC=$100VC = \$100, TC=$130TC = \$130, ATC=$0.10ATC = \$0.10, MPL=700MP_L = 700, APL=662.5AP_L = 662.5

    • Workers (L=3L = 3), Machines = 2, Copies (Q=2200Q = 2200), FC=$30FC = \$30, VC=$150VC = \$150, TC=$180TC = \$180, ATC=$0.08ATC = \$0.08, MPL=875MP_L = 875, APL=733.3AP_L = 733.3

    • Workers (L=4L = 4), Machines = 2, Copies (Q=2600Q = 2600), FC=$30FC = \$30, VC=$200VC = \$200, TC=$230TC = \$230, ATC=$0.09ATC = \$0.09, MPL=400MP_L = 400, APL=650.0AP_L = 650.0

    • Workers (L=5L = 5), Machines = 2, Copies (Q=2900Q = 2900), FC=$30FC = \$30, VC=$250VC = \$250, TC=$280TC = \$280, ATC=$0.10ATC = \$0.10, MPL=300MP_L = 300, APL=580.0AP_L = 580.0

    • Workers (L=6L = 6), Machines = 2, Copies (Q=3100Q = 3100), FC=$30FC = \$30, VC=$300VC = \$300, TC=$330TC = \$330, ATC=$0.11ATC = \$0.11, MPL=200MP_L = 200, APL=516.6AP_L = 516.6

  • Dynamics between Total Output and MPLMP_L:

    • When MPLMP_L is increasing (Workers 1 to 3), total output increases at an increasing rate.

    • When MPLMP_L is decreasing but positive (Workers 4 to 6), total output increases at a decreasing rate (diminishing returns apply).

    • If MPLMP_L becomes negative, total output starts decreasing absolute volume.

    • Mathematical Cost Metrics & Curve Relationships:

  • Average Cost Formulas:

ATC=TCQATC = \frac{TC}{Q}

AFC=FCQAFC = \frac{FC}{Q}

AVC=VCQAVC = \frac{VC}{Q}

ATC=AFC+AVCATC = AFC + AVC

  • Marginal Cost Formula:

MC=ΔTCΔQMC = \frac{\Delta TC}{\Delta Q}

  • Tabulated Cost Per Unit Analysis (Julie Johnson's Store - Table 6.3 / Slide 19):

    • Output Q=0Q = 0: FC=$30FC = \$30, VC=$0VC = \$0, TC=$30TC = \$30, ATC=N/AATC = \text{N/A}, AFC=N/AAFC = \text{N/A}, AVC=N/AAVC = \text{N/A}, MC=N/AMC = \text{N/A}

    • Output Q=625Q = 625: FC=$30FC = \$30, VC=$50VC = \$50, TC=$80TC = \$80, ATC=$0.13ATC = \$0.13, AFC=$0.05AFC = \$0.05, AVC=$0.08AVC = \$0.08, MC=$0.08MC = \$0.08

    • Output Q=1325Q = 1325: FC=$30FC = \$30, VC=$100VC = \$100, TC=$130TC = \$130, ATC=$0.10ATC = \$0.10, AFC=$0.02AFC = \$0.02, AVC=$0.08AVC = \$0.08, MC=$0.07MC = \$0.07

    • Output Q=2200Q = 2200: FC=$30FC = \$30, VC=$150VC = \$150, TC=$180TC = \$180, ATC=$0.08ATC = \$0.08, AFC=$0.01AFC = \$0.01, AVC=$0.07AVC = \$0.07, MC=$0.06MC = \$0.06

    • Output Q=2600Q = 2600: FC=$30FC = \$30, VC=$200VC = \$200, TC=$230TC = \$230, ATC=$0.09ATC = \$0.09, AFC=$0.01AFC = \$0.01, AVC=$0.08AVC = \$0.08, MC=$0.13MC = \$0.13

    • Output Q=2900Q = 2900: FC=$30FC = \$30, VC=$250VC = \$250, TC=$280TC = \$280, ATC=$0.10ATC = \$0.10, AFC=$0.01AFC = \$0.01, AVC=$0.09AVC = \$0.09, MC=$0.17MC = \$0.17

    • Output Q=3100Q = 3100: FC=$30FC = \$30, VC=$300VC = \$300, TC=$330TC = \$330, ATC=$0.11ATC = \$0.11, AFC=$0.01AFC = \$0.01, AVC=$0.10AVC = \$0.10, MC=$0.25MC = \$0.25

  • Geometric Characteristics of Cost Curves:

    • MCMC, ATCATC, and AVCAVC curves are all U-shaped.

    • Marginal Cost (MCMC) intersects Average Cost curves (ATCATC and AVCAVC) at their exact minimum points from below.

    • When MC<ATCMC < ATC (or MC<AVCMC < AVC), average total cost (or average variable cost) is falling/decreasing.

    • When MC>ATCMC > ATC (or MC>AVCMC > AVC), average total cost (or average variable cost) is rising/increasing.

    • As output QQ increases, AFCAFC steadily drops toward zero, causing the vertical distance/gap between ATCATC and AVCAVC to narrow continuously.

    • Long-Run Costs and Scale Economies:

  • Long-Run Average Cost Curve (LRACLRAC): A curve showing the lowest cost at which the firm is able to produce a given quantity of output in the long run, when no inputs are fixed. The LRACLRAC curve acts as an envelope to the short-run average cost (SRATCSRATC) curves and is tangent to them.

  • Economies of Scale: Exist when a firm's long-run average costs fall as it increases its scale of production and quantity of output. Driven by increasing returns to scale (e.g., inputs increased 4-fold, output increases 7-fold).

  • Constant Returns to Scale: Exist when a firm's long-run average costs remain unchanged as it increases its scale of production and output (e.g., inputs increased 4-fold, output increases 4-fold).

  • Diseconomies of Scale: Exist when a firm's long-run average costs rise as it increases its scale of production and output. Driven by decreasing returns to scale (e.g., inputs increased 4-fold, output increases 2-fold).

  • Minimum Efficient Scale (MESMES): The level of output at which all economies of scale have been exhausted. It represents the minimum point on the long-run average cost curve.

    • Bookshop Example: Small bookshop (high ATCATC at 1,000 books/month) vs. Dymocks store (ATCATC minimized at minimum efficient scale between 20,000 and 40,000 books/month) vs. store experiencing diseconomies of scale (higher ATCATC above 60,000 books/month).

Market Structures and Perfect Competition

  • Structure, Conduct, and Performance Paradigm:

    • Central to industrial organization theories.

    • Economists categorize industries into four market structures along a spectrum of competition and market concentration:

    • Spectrum of Concentration: Perfect Competition (Least concentrated) →\rightarrow Monopolistic Competition →\rightarrow Oligopoly →\rightarrow Monopoly (Most concentrated).

    • Market Concentration & Contestability:

    • Absence of competition leads to high market concentration, where a few dominant firms supply the entire market.

    • Uncompetitive structures can still display highly competitive firm behavior if the market is contestable (e.g., the UK supermarket sector).

  • Cross-Comparison of Market Structures:

    • Perfect Competition:

    • Number of firms: Many

    • Type of product: Identical (Homogeneous)

    • Ease of entry: High (No barriers)

    • Concentration level: Low

    • Examples: Wheat, Apples

    • Monopolistic Competition:

    • Number of firms: Many

    • Type of product: Differentiated (Heterogeneous)

    • Ease of entry: High

    • Examples: Clothing stores, Restaurants

    • Oligopoly:

    • Number of firms: Few

    • Type of product: Identical or Differentiated

    • Ease of entry: Low

    • Concentration level: High

    • Examples: Banking, Supermarkets

    • Monopoly:

    • Number of firms: One

    • Type of product: Unique

    • Ease of entry: Entry blocked

    • Concentration level: High

    • Examples: Letter delivery, Tap water

  • Necessary Conditions for Perfect Competition:

    1. There are many buyers and sellers, all of whom are small relative to the market. No single buyer or seller is powerful enough to influence market outcomes.

    2. All firms sell identical products. No individual firm holds an extra competitive edge or product differentiation over rivals.

    3. There are no barriers to new firms entering the market or existing firms leaving the market (high ease of entry and exit).

  • Demand for a Perfectly Competitive Firm:

    • Price Taker: A buyer or seller that is unable to affect the market price.

    • Individual Demand Curve: Horizontal (perfectly elastic, ∣e∣=∞|e| = \infty). Any price increase above market price drops quantity demanded to zero; a firm can sell any output volume at the market equilibrium price.

Demand=Price=AverageRevenue(AR)=MarginalRevenue(MR)Demand = Price = Average Revenue (AR) = Marginal Revenue (MR)

  • Market Demand vs. Firm Demand:

    • The market demand curve is downward sloping, established by the horizontal summation of individual consumer preferences.

    • Market supply and demand interaction determines equilibrium price (e.g., $4.00\$4.00 per bushel in the oat market with an equilibrium market volume of 80,000,000 bushels).

    • Individual farmer (e.g., Farmer Jones) accepts market price $4.00\$4.00 as given.

    • Revenue Concepts and Formulas:

  • Total Revenue (TRTR):

TR=P×QTR = P \times Q

  • Average Revenue (ARAR):

AR=TRQ=PAR = \frac{TR}{Q} = P

  • Marginal Revenue (MRMR): The change in total revenue brought about by selling an additional unit of output:

MR=ΔTRΔQMR = \frac{\Delta TR}{\Delta Q}

  • For a price taker, selling additional units at price PP implies AR=MR=PAR = MR = P.

    • Profit Maximization Principles:

  • Mathematical Statement:

Profit=TR−TC=(P×Q)−TC\text{Profit} = TR - TC = (P \times Q) - TC

Profit per unit=P−ATC\text{Profit per unit} = P - ATC

Total Profit=(P−ATC)×Q\text{Total Profit} = (P - ATC) \times Q

  • Maximization Condition: A rational firm maximizes profit at the output level where the difference between TRTR and TCTC is greatest, or where marginal revenue equals marginal cost:

MR=MCMR = MC

  • Universality: The MR=MCMR = MC rule is the general profit-maximizing/loss-minimizing condition for rational firms operating under any market structure, not just perfect competition.

  • Visual Curve Interpretation:

    • Profit-maximizing output occurs where MCMC intersects MRMR from below.

    • Prior intersection point (e.g., Point A on curve diagram) is not a profit-maximizing point because producing between A and optimal QQ adds more revenue than cost; choosing Point A leaves foregone profits.

  • Oat Farmer Numerical Illustration (Slide 38 Table):

    • Output Q=0Q = 0 bushels: TR=$0.00TR = \$0.00, TC=$1.00TC = \$1.00, Profit = −$1.00-\$1.00, MR=$4.00MR = \$4.00, MC=$0.50MC = \$0.50

    • Output Q=1Q = 1 bushel: TR=$4.00TR = \$4.00, TC=$4.50TC = \$4.50, Profit = −$0.50-\$0.50, MR=$4.00MR = \$4.00, MC=$3.50MC = \$3.50

    • Output Q=2Q = 2 bushels: TR=$8.00TR = \$8.00, TC=$7.00TC = \$7.00, Profit = $1.00\$1.00, MR=$4.00MR = \$4.00, MC=$2.50MC = \$2.50

    • Output Q=3Q = 3 bushels: TR=$12.00TR = \$12.00, TC=$8.50TC = \$8.50, Profit = $3.50\$3.50, MR=$4.00MR = \$4.00, MC=$1.50MC = \$1.50

    • Output Q=4Q = 4 bushels: TR=$16.00TR = \$16.00, TC=$9.50TC = \$9.50, Profit = $6.50\$6.50, MR=$4.00MR = \$4.00, MC=$1.00MC = \$1.00

    • Output Q=5Q = 5 bushels: TR=$20.00TR = \$20.00, TC=$11.50TC = \$11.50, Profit = $8.50\$8.50, MR=$4.00MR = \$4.00, MC=$2.00MC = \$2.00

    • Output Q=6Q = 6 bushels: TR=$24.00TR = \$24.00, TC=$17.50TC = \$17.50, Profit = $6.50\$6.50 (Max Profit level; ΔTR=$4.00\Delta TR = \$4.00, ΔTC=$6.00\Delta TC = \$6.00 beyond 5 units), MR=$4.00MR = \$4.00, MC=$6.00MC = \$6.00

    • Output Q=7Q = 7 bushels: TR=$28.00TR = \$28.00, TC=$25.50TC = \$25.50, Profit = $2.50\$2.50, MR=$4.00MR = \$4.00, MC=$8.00MC = \$8.00

    • Output Q=8Q = 8 bushels: TR=$32.00TR = \$32.00, TC=$34.50TC = \$34.50, Profit = −$2.50-\$2.50, MR=$4.00MR = \$4.00, MC=$9.00MC = \$9.00

    • Three Short-Run Profitability Scenarios:

  • Economic Profit (P>ATCP > ATC): Price exceeds average total cost at output where MR=MCMR = MC. The firm earns positive economic profit represented by area (P−ATC)×Q(P - ATC) \times Q.

  • Break-Even (P=ATCP = ATC): Market price equals average total cost at its minimum point where MR=MCMR = MC. Total revenue equals total cost (TR=TCTR = TC), resulting in zero economic profit.

  • Economic Loss (P<ATCP < ATC): Price is less than average total cost at output where MR=MCMR = MC. Total cost exceeds total revenue (TC>TRTC > TR), creating negative economic profit.

    • Short-Run Shutdown Decision & Sunk Costs:

  • Sunk Cost Context: In the short run, fixed costs are sunk costs (unrecoverable expenditures that must be paid regardless of whether output is produced).

  • Decision Matrix for Loss-Making Firm:

    • Alternative 1: Continue operating if P≥AVCP \ge AVC. Revenues cover all variable costs and contribute partially to paying fixed costs.

    • Alternative 2: Shut down production temporarily if P<AVCP < AVC. Eliminates variable costs completely; losses are capped strictly at fixed costs.

  • Shutdown Point: The minimum point on a firm's average variable cost curve (AVCAVC). If price falls below this point (P<AVCP < AVC), the firm halts short-run production.

    • Derivation of Short-Run Supply Curves:

  • Individual Firm Short-Run Supply Curve: The segment of the firm's marginal cost (MCMC) curve that lies above its average variable cost (AVCAVC) curve.

  • Market Short-Run Supply Curve: The horizontal summation of the individual firms' marginal cost supply curves (upward sloping).

    • Long-Run Market Adjustments (Entry and Exit Dynamics):

  • Role of Economic Profits:

    • Positive economic profits (P>ATCP > ATC) attract new entry due to low entry barriers.

    • Entry shifts the market supply curve to the right (S1→S2S_1 \rightarrow S_2).

    • Market price falls until it reaches the minimum point on the typical firm's ATCATC curve, eliminating economic profits.

  • Role of Economic Losses:

    • Economic losses (P<ATCP < ATC) cause unprofitable firms to exit the market due to low exit barriers.

    • Exit shifts the market supply curve to the left (S1→S2S_1 \rightarrow S_2).

    • Market price rises until remaining firms break even (P=ATCP = ATC).

  • Case Example (Anne Moreno's Carrot Farm):

    • Initial Equilibrium: Price = $20\$20/box, Anne produces 10,000 boxes at a profit, market quantity = 120,000 boxes.

    • Entry Impact: Market supply shifts right (S1→S2S_1 \rightarrow S_2), price drops to $15\$15/box, market quantity increases to 280,000 boxes, Anne breaks even producing 11,000 boxes.

    • Loss & Exit Adjustment: Demand drops (D1→D2D_1 \rightarrow D_2), price drops to $12\$12/box (Anne produces 8,000 boxes at a loss). Exit of existing firms shifts supply left (S1→S2S_1 \rightarrow S_2), raising price back to $15\$15/box where Anne breaks even at 10,000 boxes and total market output settles at 240,000 boxes.

    • Long-Run Competitive Equilibrium & Supply:

  • Long-Run Competitive Equilibrium: The state in which entry and exit have resulted in the typical firm breaking even (P=min ATCP = \text{min } ATC).

  • Long-Run Supply Curve (LRSLRS): Shows the relationship in the long run between market price and quantity supplied. It is horizontal (perfectly elastic) at the market price defined by the minimum point of the typical firm's average total cost curve.

  • In the long run, firms have no incentive to enter or exit because economic profits are zero.

    • Efficiency Properties of Perfect Competition:

  • Productive Efficiency: Occurs when a good or service is produced using the least amount of resources. Satisfied in long-run competitive equilibrium because output is produced at the absolute lowest point of the average total cost curve (min ATCATC).

  • Allocative Efficiency: Occurs when production reflects consumer preferences. Every good or service is produced up to the point where the last unit provides a marginal benefit to consumers equal to the marginal cost of producing it:

P=MCP = MC