Comprehensive Study Notes on Irrigation Engineering and Soil-Water Management
Irrigation Canal Alignment and Channel Types
Watershed Canal Alignment
- In relatively flat land areas (plain areas), irrigation canals are generally aligned along the watershed line, also known as the ridge line.
- This alignment is considered advantageous because it allows the canal to irrigate land on both sides of the ridge under gravity.
- The best alignment for an irrigation channel is one that follows a watershed for the most part of its length, as it encounters the fewest drainage crossings.
Contour Canal Alignment
- In hilly areas, ordinary irrigation canals are aligned along contour lines.
- A contour line is defined as an imaginary line passing through points of equal elevation on the earth's surface.
Side Slope Channels
- A side slope channel is aligned nearly parallel to the natural drainage of an area (or perpendicular to the contour lines).
- These channels are characterized by a side slope that must be stable, depending on the specific soil type.
- Standard side slopes in excavation (cutting) range from to .
- Actual slopes in excavation typically settle at .
- Standard side slopes in soil filling range from to .
Stream Line Definition
- A stream line is a curve such that the tangent at each point provides the direction of the instantaneous local velocity vector.
Methods of Irrigation Water Application
Border Strip Method (Border Flooding)
- This is a method of controlled surface flooding where the field is divided into a series of long, narrow strips separated by low levels or bunds (border ridges/dikes).
- Each strip is irrigated separately via a field channel.
- Dimensions: Strips are typically to wide and to long.
- Suitability: This method is most suitable for rolling lands.
Furrow Irrigation
- Furrow irrigation is a surface irrigation technique where water is applied through a series of long, narrow field channels called furrows, which are dug at regular intervals.
- In this method, crops are grown on the ridges between the furrows.
- Water flowing in the furrows infiltrates the soil and spreads laterally to provide moisture to the crops.
- Application: This method is commonly used for row crops, including maize, cotton, potatoes, sugarcane, sugar beet, groundnut, and tobacco.
Subsurface Water and Aquifer Systems
Artesian Systems
- An artesian system is a confined source of water.
- An artesian aquifer is a confined aquifer containing groundwater under positive pressure.
- The water is trapped between layers of impermeable rock or clay, which apply the pressure to the water within the aquifer.
Infiltration Gallery
- An infiltration gallery is used to collect water from the aquifer underlying a river.
- It consists of a perforated pipe laid in a trench in a river bed.
- Benefit: This system utilizes natural bank filtration, which reduces the treatment requirements compared to direct surface water withdrawal.
Soil Moisture and Capillary Water
- Capillary water is the water content retained in the soil after gravitational water has drained away.
- It is held in the soil against the force of gravity.
- This water serves as the principal source of liquid for plant growth, as plant roots gradually absorb it.
Soil Profile Zones
- Saturation Zone: A zone where all interstices are filled with water under hydrostatic pressure. It is bounded at the top by the water table or an impermeable strata and extends down to underlying impermeable strata.
- Zone of Aeration: This zone includes the following:
- Soil Water Zone: Extends from the ground surface down to the major root zone. It becomes saturated during rainfall or irrigation.
- Intermediate Zone: The area extending from the lower edge of the soil water zone to the upper limit of the capillary zone.
- Capillary Zone: Extends from the water table up to the limit of capillary rise.
Irrigation Engineering Definitions and Calculations
Duty and Delta () Relationship
- Duty is the area (in hectares) that can be irrigated by () of discharge available throughout the base period.
- Duty should always specify the place of measurement.
- The relationship formula is:
Where:
- = Total water depth (Delta) in meters ().
- = Base period in days.
- = Duty in hectares per cumec ().
- Example Calculation: If and :
Crop Periods and Timing
- Crop Period: The total time elapsed from the instant of sowing to the instant of harvesting.
- Base Period: The time between the first watering at the time of sowing and the last watering before harvesting.
- Comparison: For all practical purposes, they are taken as equal and expressed in days, though theoretically, the crop period is slightly longer than the base period.
- Paleo Irrigation: The very first watering provided before sowing the crop. It is done to add sufficient moisture to the unsaturated soil zone for initial growth.
Crop Ratio
- The ratio of the area irrigated in the Rabi season to the area irrigated in the Kharif season.
- Because Kharif crops require to times more water than Rabi crops, the ratio is managed to maintain a relatively uniform discharge requirements throughout the year.
Crop Specific Requirements in India
Average Delta () values on the field:
- Rice:
- Sugarcane:
- Tobacco:
- Cotton:
- Wheat:
- Barley:
- Maize:
Crop Classification
- Rabi Crops: Examples include Barley and Onion.
- Non-Rabi Crops: Sesame and Groundnut are listed as alternatives that do not fall under the Rabi category in the context of the provided test question.
Questions & Discussion
Q: A channel aligned nearly parallel to the natural drainage of an area is called?
A: Side slope channel.
Q: Which method of water application is suitable for rolling land?
A: Border flooding (or border strip method).
Q: What is the specific width of a strip in the border strip method?
A: .
Q: Which zone is NOT related to the zone of aeration?
A: Saturation zone.