Untitled


πŸ§ͺ EXPERIMENT 3 REVIEWER

QUALITATIVE TESTS OF PROTEINS

---

I. PROTEINS

What are proteins?

Proteins are biological macromolecules made of L-alpha amino acids.

Amino acids are linked together by peptide bonds.

Proteins have many functions in the body, including:

Structural β†’ collagen, keratin

Catalytic β†’ enzymes such as hexokinase and amylase

Transport β†’ hemoglobin, albumin, lipoproteins

Regulatory β†’ insulin, glucagon


Amino Acid Structure

Each amino acid contains:

Component Description

Amino group- Basic group

Carboxyl group- Acidic group

Hydrogen- Attached to the central carbon

R group- Variable side chain that differs among amino acids

The R group determines whether an amino acid is non-polar, polar, negatively charged, or positively charged.

---

II. PEPTIDE BOND

A peptide bond forms between:

Carboxyl group of one amino acid + amino group of another amino acid

Important points

Protein chains run from N-terminal β†’ C-terminal.

Three or more peptide bonds are needed for a positive Biuret test.

Denaturation does NOT break peptide bonds.

Hydrolysis breaks peptide bonds.

---

III. LEVELS OF PROTEIN STRUCTURE

Level What it is Main bonds/interactions

Primary Linear sequence of amino acids Peptide bonds

Secondary Local folding into Ξ±-helices and Ξ²-sheets Hydrogen bonds

Tertiary Overall 3D shape of one polypeptide H-bonds, ionic bonds, disulfide bonds, hydrophobic interactions

Quaternary Association of multiple polypeptide chains Interactions between subunits


---

IV. AROMATIC AMINO ACIDS

The experiment focuses on tyrosine, phenylalanine, and tryptophan.

These amino acids contain aromatic rings.

Aromatic rings are detected by the Xanthoproteic test.

Aromatic amino acids also absorb strongly around 280 nm, which is important in UV-based protein quantitation.

---

V. SPECIMENS

Specimen Important Characteristics Expected Important Tests

Aspartame Dipeptide; only 1 peptide bond; contains phenyl ring Biuret βˆ’; Xanthoproteic +

Glutathione Tripeptide; 2 peptide bonds; contains free sulfhydryl group Biuret weak/βˆ’

Egg albumen True protein; rich in aromatic and basic amino acids General tests +

Milk protein Mainly casein; also contains whey proteins General protein tests +

Urine Clinical specimen; normally <150 mg protein/24 h SSA screen

---

VI. QUALITATIVE PROTEIN TESTS

⭐ MASTER TABLE

Test Detects Key Reagents Positive Result Important Point

Biuret Peptide bonds NaOH + CuSOβ‚„ Violet to purple Requires β‰₯3 peptide bonds

Ninhydrin Free Ξ±-amino groups Ninhydrin + heat Deep blue-purple Proline gives yellow

Hopkins-Cole Tryptophan Hopkins-Cole + conc. Hβ‚‚SOβ‚„ Violet ring Ring appears at interface

Sakaguchi Arginine NaOH + Ξ±-naphthol + chlorine water Red to red-orange Order of reagents is important

Xanthoproteic Aromatic amino acids Conc. HNO₃ + NaOH Yellow β†’ orange Due to nitration of aromatic ring

SSA Urine protein 7% SSA Turbidity Acid precipitation

---

1. BIURET TEST

Principle

The Biuret test detects peptide bonds.

Copper ions in an alkaline solution coordinate with the nitrogen of three or more peptide bonds, producing a violet-colored complex.

Reagents

1. 10% NaOH

2. 1% CuSOβ‚„

Procedure

1. Add 2 mL of 10% NaOH to the protein sample.

2. Add 2–3 drops of 1% CuSOβ‚„.

3. Mix and observe.

Results

Result Observation

Positive Violet to purple

Negative Blue color of CuSOβ‚„ remains unchanged

Specimen results

Sample Expected

Aspartame ❌ Negative

Glutathione Weak/❌ Negative

Egg albumen βœ… Positive

Milk βœ… Positive

⭐ Remember:

BIURET = PEPTIDE BONDS = VIOLET

---

2. NINHYDRIN TEST

Principle

Ninhydrin detects free Ξ±-amino groups.

The reaction produces Ruhemann's purple.

Reagent

2% Ninhydrin

Heat

Procedure

1. Add 1 mL of 2% ninhydrin.

2. Mix.

3. Heat in a boiling water bath until a color change occurs.

Results

Result Observation

Positive Deep blue-purple

Proline/hydroxyproline Yellow

Important

All four protein samples in the experiment are expected to be positive.

Color intensity does NOT indicate protein concentration.

⭐ Remember:

NINHYDRIN = FREE AMINO GROUP = PURPLE

---

3. HOPKINS-COLE TEST

Principle

The test is specific for tryptophan.

Glyoxylic acid reacts with the indole ring of tryptophan.

Reagents

Hopkins-Cole reagent

Concentrated Hβ‚‚SOβ‚„

Procedure

1. Add 2.0 mL Hopkins-Cole reagent.

2. Mix.

3. Carefully layer 1.0 mL concentrated Hβ‚‚SOβ‚„ along the side of the tube.

4. DO NOT MIX.

5. Observe the interface.

Results

Result Observation

Positive Violet ring at interface

Negative No ring

Expected

Sample Expected

Egg albumen βœ… Positive

Milk βœ… Positive

Aspartame ❌ Negative

⭐ Remember:

HOPKINS-COLE = TRYPTOPHAN = VIOLET RING

---

4. SAKAGUCHI TEST

Principle

The Sakaguchi test detects arginine.

It reacts with the guanidinium group of arginine under oxidation.

Reagents

40% NaOH β†’ alcoholic Ξ±-naphthol β†’ chlorine water

⚠ The order must be followed exactly.

Procedure

1. Add 2–3 drops 40% NaOH.

2. Add 2–3 drops alcoholic Ξ±-naphthol.

3. Add 2–3 drops chlorine water.

4. Observe.

Results

Result Observation

Positive Red to red-orange

Negative No color develops

Expected

Sample Expected

Egg albumen βœ… Positive

Milk βœ… Positive

Aspartame ❌ Negative

Glutathione ❌ Negative

⭐ Remember:

SAKAGUCHI = ARGININE = RED

---

5. XANTHOPROTEIC TEST

Principle

Detects aromatic amino acids.

Concentrated nitric acid causes nitration of the aromatic ring, producing a yellow product. Addition of alkali deepens the color to orange.

Reagents

Concentrated HNO₃

50% NaOH

Procedure

1. Add 1 mL concentrated HNO₃.

2. Mix.

3. Observe the precipitate.

4. Heat in a water bath for 5 minutes.

5. Cool.

6. Add 50% NaOH to make the solution basic.

Results

Result Observation

Positive Yellow precipitate β†’ orange with alkali

Negative No color change

Expected

Sample Expected

Aspartame βœ… Positive

Egg albumen βœ… Positive

Milk βœ… Positive

Glutathione ❌ Negative

⭐ Remember:

XANTHOPROTEIC = AROMATIC AA = YELLOW β†’ ORANGE

---

6. SULFOSALICYLIC ACID (SSA) TEST

Purpose

An acid precipitation test for urine protein.

Principle

SSA acid denatures and precipitates proteins present in urine.

Reagent

7% sulfosalicylic acid

Ratio

4 parts urine : 1 part SSA

Procedure

1. Collect clean-catch urine.

2. Centrifuge about 12 mL urine at ~450 Γ— g for 5 minutes.

3. Transfer 4 mL clear supernatant.

4. Add 1 mL 7% SSA.

5. Gently invert twice.

6. Let stand for 10 minutes.

7. Examine against a dark background.

8. Grade turbidity.

⚠ Do not shake vigorously because this can produce false turbidity.

Results

Grade Interpretation

Negative No significant turbidity

Trace Slight turbidity

1+ Increased turbidity

2+ More turbidity

3+ Strong turbidity

4+ Very strong turbidity

Clinical importance

SSA is more sensitive than reagent strips for some proteins.

It can detect:

Globulins

Bence-Jones proteins

This is important because a patient with multiple myeloma may have Bence-Jones proteins that are missed by a reagent strip but detected by SSA.

⭐ Remember:

SSA = URINE PROTEIN = TURBIDITY

---

VII. EXPERIMENT 3 QUICK IDENTIFICATION TABLE

If the question asks... Answer

Detects peptide bonds Biuret

Detects free amino groups Ninhydrin

Detects tryptophan Hopkins-Cole

Detects arginine Sakaguchi

Detects aromatic amino acids Xanthoproteic

Screens urine protein SSA

Violet/purple Biuret

Deep blue-purple Ninhydrin

Violet ring Hopkins-Cole

Red/red-orange Sakaguchi

Yellow β†’ orange Xanthoproteic

Turbidity SSA

---

VIII. CLINICAL CORRELATION

Protein reference values from the experiment

Measurement Reference

Serum total protein 6.0–8.5 g/dL

Serum albumin 3.5–5.0 g/dL

Normal urine protein <150 mg/24 h

Important conditions

Nephrotic syndrome

Proteinuria > 3.5 g/24 h

Hypoalbuminemia

Edema

Hyperlipidemia

Oval fat bodies

Hypoproteinemia

Hepatic cirrhosis

Protein-losing enteropathy

Malnutrition

Hyperproteinemia

Dehydration

Multiple myeloma

---

IX. COMMON ERRORS IN EXPERIMENT 3

Mistake Why it matters

Mixing Hopkins-Cole layers Loses the violet interface ring

Wrong Sakaguchi reagent order Can cause incorrect result

Shaking SSA tube Can create false turbidity

Using uncentrifuged urine Sediment may mimic a positive

Expecting Biuret positive for aspartame It has only one peptide bond

---

πŸ§ͺ EXPERIMENT 4 REVIEWER

PROTEIN DENATURATION AND PRECIPITATION

---

I. PROTEIN FOLDING

Protein structure is maintained by several interactions.

Interaction Level Characteristics

Hydrogen bonds Secondary, tertiary Individually weak but collectively stabilize structure

Ionic bonds / salt bridges Tertiary Sensitive to pH and salt concentration

Hydrophobic interactions Tertiary Major driving force for globular protein folding

Van der Waals forces Tertiary Weak attractions between atoms

Disulfide bonds Tertiary Covalent; rigid and heat-resistant

---

II. STATES OF PROTEINS

State Description Appearance Reversibility

Native Folded and active Clear Normal state

Denatured Unfolded and inactive May remain clear Frequently reversible under mild conditions

Aggregated Proteins associate together Turbidity/cloudiness Partially reversible

Coagulated Firm protein mass Dense precipitate/firm gel Irreversible

⭐ Key concept

Denaturation = loss of higher-order structure

The peptide bonds remain intact.

---

III. DENATURATION VS PRECIPITATION VS COAGULATION

Term Meaning

Denaturation Protein loses its normal higher-order structure and usually its function

Precipitation Insoluble protein separates from solution

Coagulation Protein forms a firm, irreversible mass

Easy sequence:

Native β†’ Denatured β†’ Aggregated β†’ Coagulated

---

IV. SPECIMENS

Egg Albumin

Main protein: Ovalbumin

Globular phosphoglycoprotein

Approximately 45 kDa

Egg white contains about 10% protein and almost 90% water

Used as the model protein in this experiment.

Important preparation

5 mL egg white + 45 mL distilled water

Mix slowly and gently.

Why?

Because excessive agitation creates an air-water interface that can denature the protein and produce froth.

Control

An untreated control tube is prepared and used to compare with treated samples.

---

V. AGENTS THAT DENATURE OR PRECIPITATE PROTEINS

Agent/Test Main Mechanism Expected Effect

Heat Disrupts weak interactions Denaturation/coagulation

Alcohol Competes for hydrogen bonding; affects hydrophobic interactions Protein precipitation

Strong acids/bases Alter side-chain ionization and disrupt salt bridges Dense precipitation

Heavy metals Bind sulfhydryl groups and cross-link proteins Flocculent precipitate

Alkaloidal reagents Bind positively charged amino groups Yellow-brown precipitate

Acetic acid Acid precipitation of proteins Protein precipitate

---

1. HEAT

Principle

Heat disrupts the interactions maintaining protein structure.

Procedure

Place 1.0 mL fresh egg white in a test tube.

Observe the initial texture and color.

Heat.

Observe coagulation and color changes.

Cool to room temperature.

Check whether the change reverses.

Expected concept

Heat denaturation β†’ coagulation β†’ irreversible

Once egg albumin has coagulated, cooling does not return it to its original state.

⭐ Remember:

HEAT = DENATURES β†’ COAGULATES

---

2. ALCOHOL

Reagents

95% ethanol

70% ethanol

Principle

Alcohol competes for hydrogen bonds and affects the hydrophobic interior of proteins, leading to precipitation.

Important comparison

95% Ethanol 70% Ethanol

Higher alcohol concentration Contains more water

Acts faster Better disinfectant

Less water for penetration Water helps penetration into cells

⭐ Important exam point:

70% ethanol is a better disinfectant than 95% ethanol because the water helps it penetrate cells before protein coagulation seals the surface.

---

3. STRONG ACIDS AND BASES

Principle

Strong acids and bases:

Alter side-chain ionization

Disrupt salt bridges

Can drive proteins toward their isoelectric point

Cause dense precipitates

Isoelectric point

At the isoelectric point (pI):

> Protein has no net charge and is least soluble.

Therefore, protein precipitation is favored.

⭐ Remember:

ACID/BASE β†’ changes charge β†’ breaks salt bridges β†’ precipitation

---

4. HEAVY METALS

Reagents

1% Silver nitrate (AgNO₃)

Copper sulfate (CuSOβ‚„)

Principle

Heavy metals bind to sulfhydryl (-SH) groups and can cross-link protein chains.

Result

Flocculent precipitate

The cross-linking is generally irreversible.

Clinical significance

This mechanism contributes to heavy metal poisoning, where metal ions bind to sulfhydryl groups of enzymes and cause loss of enzyme activity.

⭐ Remember:

HEAVY METALS β†’ -SH GROUPS β†’ CROSS-LINKING β†’ PRECIPITATE

---

5. ALKALOIDAL REAGENTS

Reagents

Picric acid

Tannic acid

Principle

These reagents bind to positively charged amino groups of proteins.

Result

Yellow to brown precipitate

Important safety

⚠ Picric acid is explosive when dry. It must never be allowed to dry out.

---

VI. URINE HEAT AND ACETIC ACID TEST

This is the clinical application of protein precipitation.

Specimen

Clean-catch urine

If cloudy, centrifuge and use the clear supernatant

Procedure

1. Fill a test tube about β…” full with clear urine.

2. Heat ONLY the upper third of the tube.

3. Compare the heated upper portion with the unheated lower portion.

4. If cloudiness appears, add 3–5 drops of 10% acetic acid.

5. Observe what happens.

6. Grade persistent turbidity.

Why heat only the upper third?

The lower, unheated portion serves as the comparison/control.

---

VII. PROTEIN VS PHOSPHATE TURBIDITY

This is VERY important for the exam.

Observation after heating Interpretation

Cloudiness appears Could be protein or phosphate

Cloudiness clears after acetic acid Phosphates

Turbidity persists after acetic acid Protein

⭐ Memorize:

CLEARS WITH ACID = PHOSPHATE

PERSISTS WITH ACID = PROTEIN

---

VIII. EXPERIMENT 4 MASTER TABLE

Treatment What it affects Main mechanism Expected result

Heat Protein structure Disrupts weak interactions Coagulation

95% ethanol H-bonding/hydrophobic interactions Organic solvent action Precipitation

70% ethanol H-bonding/hydrophobic interactions Organic solvent action Precipitation

Strong acid Side-chain charges Disrupts salt bridges Dense precipitate

Strong base Side-chain charges Disrupts salt bridges Dense precipitate

AgNO₃ Sulfhydryl groups Binding/cross-linking Flocculent precipitate

CuSOβ‚„ Sulfhydryl groups Binding/cross-linking Flocculent precipitate

Picric acid Positively charged amino groups Ionic binding Yellow precipitate

Tannic acid Positively charged amino groups Ionic binding Brown precipitate

Acetic acid Urine protein Acid precipitation Persistent turbidity

---

IX. CLINICAL APPLICATIONS

1. Autoclaving

Autoclaving uses moist heat under pressure.

According to the experiment:

121Β°C + 15 psi + 15 minutes β†’ sterilization

It works by irreversibly denaturing microbial structural and enzymatic proteins.

2. Alcohol disinfection

Alcohol-based disinfectants disrupt:

Hydrophobic interactions

Protein structure

This leads to protein coagulation.

3. Specimen handling

Improper handling can denature analytes before analysis.

For example, serum for enzyme assays should not be unnecessarily heated or repeatedly frozen and thawed.

4. Serum specimens

A heat-coagulated serum specimen cannot be properly analyzed and must be recollected because important analytes are no longer in solution.

---

X. COMMON ERRORS IN EXPERIMENT 4

Error Why it causes problems

No untreated control Difficult to distinguish actual precipitation from initial turbidity

Frothing albumin during dilution Mechanical agitation can denature protein

Heating entire urine tube Removes the proper comparison area

Calling all urine turbidity protein Phosphates can also cause turbidity

Confusing denaturation with precipitation They are different processes

---

🧠 EXPERIMENT 3 + 4 SUPER QUICK REVIEW

EXPERIMENT 3: WHAT DOES THE TEST DETECT?

Biuret β†’ Peptide bonds β†’ 🟣 Violet

Ninhydrin β†’ Free amino groups β†’ 🟣 Purple

Hopkins-Cole β†’ Tryptophan β†’ 🟣 Violet ring

Sakaguchi β†’ Arginine β†’ πŸ”΄ Red

Xanthoproteic β†’ Aromatic AA β†’ 🟑 Yellow β†’ 🟠 Orange

SSA β†’ Urine protein β†’ Turbidity

EXPERIMENT 4: WHAT HAPPENS TO THE PROTEIN?

Heat β†’ Denaturation β†’ Coagulation

Alcohol β†’ Disrupts H-bonds/hydrophobic interactions β†’ Precipitation

Acid/Base β†’ Changes charge β†’ Disrupts salt bridges β†’ Precipitation

Heavy metals β†’ Bind -SH β†’ Cross-linking β†’ Precipitation

Alkaloidal reagents β†’ Bind positive amino groups β†’ Precipitation

Acetic acid β†’ Acid precipitation β†’ Protein turbidity persists

⭐ 5 THINGS I WOULD MEMORIZE FIRST

1. Biuret = peptide bonds = violet

2. Ninhydrin = free amino groups = purple

3. Hopkins-Cole = tryptophan = violet ring

4. Sakaguchi = arginine = red

5. Xanthoproteic = aromatic amino acids = yellow β†’ orange

And for Experiment 4:

Denaturation does not break peptide bonds.

Coagulation is irreversible.

70% ethanol is a better disinfectant than 95%.

Cloudiness that clears with acetic acid = phosphate, not protein.