Gait involves the way in which an individual moves from one place to another. This movement is influenced by various factors including physical issues, range of motion, and mood.
The terms walking, ambulation, and gait are often used interchangeably, although they carry specific clinical distinctions:
Walking: Technically defined as upright bipedal ambulation, as opposed to crawling or creeping on all fours.
Gait: The clinical and documentation term for walking. In medical records, one should document that a patient "ambulated" or performed "gait" rather than saying they "walked."
Effective gait requires the coordination of all body segments and the integrity of the nervous, cardiac, and pulmonary systems.
The Gait Cycle and Quantitative Metrics
Gait Cycle (Stride): The activity occurring from the moment a single leg leaves the ground until that same foot hits the ground again.
Cadence: The number of steps taken in one minute (steps/min).
Pace: The speed of movement (distance/time). While cadence refers to turnover rate, pace refers to the actual speed. One can have a quicker cadence (more steps) at the same pace (speed) if step length is shorter.
Stride Length: The distance measured from the heel strike of one foot to the heel strike of the same foot.
Step Length: The distance from the heel strike of one foot to the heel strike of the opposite foot.
Step Width: The distance between the feet during walking. A base that is too wide is inefficient, while feet that cross excessively (scissoring) indicate pathology.
Weight Acceptance: Occurs during initial contact when the foot touches the ground and begins to take weight.
Single Leg Support (Single Leg Stance): The period when only one foot is in contact with the ground.
Double Support: The period where both feet are in contact with the ground, accounting for approximately 20% of the total gait cycle.
Distinction Between Walking and Running: Running includes a "flight phase" where neither foot is in contact with the ground. Once a flight phase exists, the activity is no longer categorized as walking.
Phase Distribution: In typical gait, the Stance Phase (foot in contact with ground) accounts for 60% of the cycle, and the Swing Phase (foot moving through space) accounts for 40%.
Gait Terminology Systems: Traditional vs. RLA
Traditional Terminology: Views gait as specific, rigid points in time, similar to a photograph (e.g., Heel Strike).
Rancho Los Amigos (RLA) Terminology: Views gait as periods of time or phases where actions occur (e.g., Initial Contact).
Traditional: "You forgot my hot tea and my doughnut."
RLA: "I like my tea pre-sweetened in my tea" (Cues the "swing" phases: pre-swing, initial swing, mid-swing, terminal swing).
Determinants of Gait and Biomechanical Efficiency
Determinants: Movements that control horizontal and vertical displacement of the Center of Mass (COM) to conserve energy and prevent fatigue.
Lateral Pelvic Shift: A frontal plane movement where the pelvis shifts side-to-side (∼2 inches) to keep the COM over the base of support. Maximal shift occurs at midstance.
Lateral Pelvic Tilt: A drop of the unsupported (swing) side pelvis of approximately 5∘. This is controlled by the hip abductors on the stance leg.
Pelvic Rotation: Occurs in the transverse plane. As one leg steps forward, that side of the pelvis rotates forward (∼10∘ total rotation). This increases step length and efficiency.
Vertical Displacement Control:
Knee Flexion: Shortens the swing leg to allow it to clear the floor without excessive hip hiking.
Ankle Plantar Flexion: Lengthens the leg during pre-swing to help push the body forward.
Trunk Motion: Includes vertebral rotation and slight flexion toward the stance side, coupled with opposite arm swing for balance and force distribution.
Ground Reaction Forces (GRF)
GRF follows Newton’s Third Law (equal and opposite reaction). These are external forces applied to the body.
Ankle GRF Sequence: Posterior, posterior, then anterior, anterior, anterior.
Hip GRF Sequence: Anterior, anterior, posterior, posterior, posterior.
Muscle Control Logic: If a GRF is anterior to a joint, the muscles on the posterior side of that joint must control the force (and vice-versa). For example, if GRF is posterior to the knee (promoting buckling), the quadriceps (anterior) must contract to provide stability.
Range of Motion (ROM) Requirements and Muscle Activation
Summary of ROM Requirements for Typical Gait
Hip Flexion: 20∘
Hip Extension: 20∘
Knee Flexion: 60∘
Knee Extension: 0∘
Ankle Dorsiflexion: 10∘
Ankle Plantar Flexion: 15∘
MTP (Great Toe) Extension: 60∘
Phase-Specific Mechanics
Initial Contact (Heel Strike): Hip in max flexion (20∘), knee nearly straight (0−5∘), ankle neutral. Muscles: Isometric co-contraction of hamstrings, glute max, quads, and tibialis anterior.
Loading Response (Foot Flat): Knee flexes to absorb weight, ankle lowers. Muscles: Eccentric quads (control knee flexion), eccentric plantar flexors (lower foot), followed by concentric tibialis anterior.
Midstance: Hip neutral (0∘), knee slightly flexed (0−5∘), ankle in 0−5∘ dorsiflexion. Muscles: Eccentric gastroc/soleus (control tibia moving forward), concentric quads, isometric hip abductors (stabilize pelvis).
Terminal Stance (Heel Off): Hip moves into extension (15−20∘), ankle dorsiflexion increases to 10∘ as the body moves forward. Muscles: Eccentric plantar flexors transition to concentric to prepare for push-off.
Pre-swing (Toe Off): Hip starts moving forward, knee bends significantly, ankle moves into plantar flexion. Great toe reaches maximal extension (60∘). Muscles: Concentric hip flexors, hamstrings, and plantar flexors.
Initial Swing (Acceleration): Hip flexes to 15∘, knee reaches max flexion (60∘) to clear the floor. Muscles: Concentric hip flexors, hamstrings, and dorsiflexors.
Mid-swing: Hip flexion increases to 25∘. Muscles: Transition from concentric hip flexion to eccentric hamstring activation to slow the leg down.
Terminal Swing (Deceleration): Knee extends to prepare for landing. Muscles: Eccentric hamstrings and hip extensors control momentum; isometric dorsiflexors hold the ankle in place.
Pathological and Atypical Gait Patterns
Antalgic Gait: A limp caused by pain, characterized by significantly decreased stance time on the painful limb.
Trendelenburg Gait (Weak Abductors):
Uncompensated: The pelvis drops and the hip pushes out laterally on the weak stance side.
Compensated: The patient leans their trunk over the weak stance leg to prevent the pelvic drop.
Gluteus Maximus Gait: Weakness in the glute max causes the trunk to lurch posteriorly during loading to force the hip into extension via the iliofemoral (Y) ligaments.
Quadriceps Weakness: Leads to knee buckling at initial contact. Compensaions include pushing the thigh back with the hand or leaning the trunk forward to force the knee into extension.
Hamstring Weakness: Causes the knee to snap into hyperextension (genu recurvatum) during midstance or terminal swing.
Clearance Compensation for Stiff Knee:
Circumduction: Swinging the leg out to the side in a circle.
Vaulting: Going up on the toes of the opposite (unaffected) leg to create height for the stiff leg to clear the floor.
Ankle Abnormalities:
Drop Foot: Weakness/paralysis of dorsiflexors causing the toe to scuff. The patient must flex the hip and knee higher (steppage gait) and the foot slaps the ground.
Equinus Gait: Walking on the toes/ball of the foot, often seen in neurological conditions like Cerebral Palsy.
Parkinsonian Gait: Characterized by festination (shuffling, small steps), hypokinesia (reduced movement), flexed posture, lack of arm swing, and difficulty with initiation or freezing.
Ataxic Gait: Jerky, uncoordinated movements caused by cerebellar issues; involves a wide base of support and inconsistent foot placement.
Hemiplegic Gait: One side of the body is affected; usually, the arm is in a spastic, flexed posture while the leg is dragged or circumducted.
Scissoring Gait: Common in Cerebral Palsy; knees and thighs cross over each other due to overactive adductors and internal rotators.
Pediatric Gait: Independent walking usually begins between 7−18 months. Characterized by a "high guard" (arms up), wide base, external rotation, and a "waddling" appearance due to lack of trunk stability.
Documentation and Assessment Standards
Documentation Checklist: Include distance ambulated, assistive device (AD) used, level of assistance (e.g., Standby Assist, Max Assist), verbal/tactile cues needed, and specific gait deviations observed.
Assessment Angles: Observe the patient from anterior (front), posterior (back), and lateral (side) views to capture different plane movements.
Treadmill vs. Overground:
Treadmill: Useful for maintaining speed and safety (handrails), but the set pace may mask natural stride variability.
Overground: Allows for natural pace selection and more realistic community simulation.
Fatigue Testing: Observe gait at the beginning versus the end of a session to see if deviations worsen with muscle fatigue or improve after specific interventions.